I’m so excited to try this in my future house lol. I’m sure there will be a recessed light somewhere that I’ll want to replace with a pendant, flush mount, or chandelier.
The person with the previous comment OBVIOUSLY DID NOT understand the step by step instructions. The installer followed the correct procedures. He eliminated the job nonessential screws and used the converters housing instead;completely securing the fixture to its new mounting unit.
They don’t tell you that you can put one of the self tapping screws through the can into the junction box and short out the whole damn thing causing you to buy a new can, get in the attic, replace it and then start all over
You must not attach any light fixture over 5lb to a remodel can light. Only new construction cans with bar hangers, using The Can Converter model R56 will support the weight of a 50lb light fixture.
I believe your having a problem installing the self tapping screws when no hole is present? Using a cordless drill with an extended Philips does the job.
I’m so excited to try this in my future house lol. I’m sure there will be a recessed light somewhere that I’ll want to replace with a pendant, flush mount, or chandelier.
"This job is a little more complicated than I thought it would be" ... Famous last words.
This is why electricians exist.
The person with the previous comment OBVIOUSLY DID NOT understand the step by step instructions. The installer followed the correct procedures. He eliminated the job nonessential screws and used the converters housing instead;completely securing the fixture to its new mounting unit.
That's good stuff. I wanna dump this can in my entry for a mini chandelier.
what did you use for your angle drill bit? where do I find on amazon?
Right? I'm waiting as well..........
They don’t tell you that you can put one of the self tapping screws through the can into the junction box and short out the whole damn thing causing you to buy a new can, get in the attic, replace it and then start all over
Who makes the kit I would like to buy some that's the same project I'm looking to do
JSB Enterprises makes The Can Converter.
@@TheCanConverter thanks for the feedback!
would this work for a ceiling fan..
Yes it will...
What bracket
What about converting a CFL can light?
You will need to bypass the transformer and bring the 110V power directly into the can light itself.
Our electrical adapter won't work on a CFL can light
You can find the drill adapter on Amazon.
ASIN # B000KL5WL6
Part # Eazypower Angle Driver,1/4" Hex Accessories, Model: 80943
for 5 lb light fixture this is ok,what about 20 lb or more?
You must not attach any light fixture over 5lb to a remodel can light. Only new construction cans with bar hangers, using The Can Converter model R56 will support the weight of a 50lb light fixture.
@@TheCanConverter : If I have an old work can/fixture, how do I convert that to a flush mount? Do you have a kit for that?
Watch what happens when you press the thumbs up button it turns blue
Probably edited the video or had a safe way for better compititon.
I’m adding a chandelier less than fifty pounds
mowah campluhkated
This shit is impossible with a normal screwdriver
I believe your having a problem installing the self tapping screws when no hole is present? Using a cordless drill with an extended Philips does the job.
Lol ugly pendents...it looked better before
"You were actually screwing..." Hurrrrr-hurrrrrr-huurrrrrrr