I just commented on your first video..... I beleive that your ideas of a sustainable mechanical energy system align very closely with mine. The fact that you mentioned freq drive control is blowing my mind right now. I too believe this can be achieved through such a system.
Have you try a small motor with higher rpm to make the generator going a bit higher in rpm.......impulses from kinetic energy are very frustrating thing
This is easy to do. All you need are frictionless bearings, 100+% efficient motor and generator, a perfect vacuum, 100% efficient belt/pulleys, room temperature superconductive electrical components, and perfect dynamic balance. Easy!
And even then there would be only enough power to keep the thing turning. Any attempt to get power out of it would stop it. All these things are dreams.
As an Electrical Engineer teaching Physics and Energy Transfer at the University is very sad to realize that so many people still believes in "Free Energy" or "over-unit Energy" or efficiencies above 100%... Detailed formulas and measurements have worked very well to explain all the electrical phenomena, loses, efficiencies and mechanical constraints. Please don't lose more time in trying to reach the impossible.
The problem is that people dont accept or understand that you cant produce energy. Energy is not a product which can be assembled or created. Its more the potential to do something and that potential is finite as far as we know and observe.
Totally Agreed with You . I don't even need to crunch down the numbers to see all the Flaws in the system . Every time I see these systems I come to a conclusion . I really don't think that people know what EFFICIENCY means at this point . Many people lost their entire life looking for something that don't exist . All these people should Focus on making a System more efficient
Did you see that when these people get to a thing they don't understand they get to those Super complicated Technical terms ? Nano scale ? Molecular ? Energy is Vibration ? WTF ? what's a motor a generator and a Flywheel has to do with Quantum mechanics ? LMAO !
Force 1 (the motor) accelerates the wheel but load 2 (the generator + load 1) decelerates the wheel more than force 1. Very cool design however. I think it might be useful if the wheel were big enough to be a battery and the generator could pull load off of the wheel over night, and the motor could spin it with solar during the day. The generator would need some sort of on ramp to initiate startup of the load, as well as releasing the generators shaft when no load is needed (100% efficient generator would solve this but all generators are not 100% as far as ive seen), as load is initiated friction is applied to the generator’s shaft until it matches speed with the wheel, and when load is no longer needed the shaft is decoupled from the wheel. If the bearings are really good, and the weight of the wheel and the speed of it is fast, and if it is in a vacuum, you create a mechanical battery!
we ,without a doubt , know there is over seeing faction that doesnt want energy giving for free. this includes fossil fuels. trillions of dollars, would be taken from these factions. not to mention the other kind of power. there has been thousands of invention deep sixed over the years. but, the most important thing , is to keep pushing these personal power alternatives . i really enjoy your site.
Yup I'm sure the government already figured it out. Other governments to if electricity suddenly becomes free there will be a major problem with the economy as we no it.
@@MarkusNenning You're* all fast asleep . i can't explain without spoiling my own project potentially giving better funded men my idea before i'm finished.. 2023 ish .
Gear ratios should alow you to minimize power needed to start everything and maximize rpm to the generator giving you the most potential for this to work
@@jonnyrox116 True but gears can add torque meaning you could in theory and more power generation units there should theoretically be a point were generation overcomes loss from friction and condutive loss the whole idea due to the laws of physics is a pipe dream but so was all great inventions to date
Dear Bro. We've mentioned this before and look forward to hearing from you about this new video. "If we place the Heavy wheel between two powerful magnetic wheels and magnetic force rotates the weight wheel according to the desired cycle, then we will definitely get good results.
There's a video is pretty old but it is still up the Wilkinson machine there's only one video there was never a part 2 ??? And I don't think that was because it didn't work ! I say take his gravity generator and make it a closed liquid system I know the 12 volt fuel pump in my car can run a couple of hours and not run my battery dead so I don't imagine it would use a whole lot of power to pump 10 gallons of liquid back 15ft in the air to a holding tank I would say the output if it had an alternator/generator on it would run a 12 volt fuel pump and more
Mr Nenning, you're engineering and manufacturing capabilities are impressive. I am a pursuer of free energy and have tried many configurations of magnet motors and other devices. The one that showed the most promise for me was the Luling motor out of Germany. I don't believe the online plans and info to be entirely accurate though, so I made a few carefully considered changes. Is there any way you might consider doing a project on it? I wholeheartedly believe that this design has the potential to deliver more energy than it requires to operate, but it will take a precise and steady hand to produce it. Let me know please. Thank you!
Hello Harold, first off all thank you for the kind feedback! And yes I am interested in doing a project on it. If you could please send me more information on it so I can do some research on what kind of material is required. Connect@verde350.net
@@dusan78 I have tried to plug everything up to a toaster and several high wattage equipment. I have also plugged in a second motor into the generator that uses more power than the one powering the generator. That is proving that the generator is able to produce the required output. I am aware that a generator under load works like a break. That except concept is used in semi truck breaks and electric cars. I have not given up yet. Thanks for the feedback though.
@@dusan78 Yes, while I agree with your statements except it seems that you're not considering the addition of inertia wheel (mechanical battery). Here is possible scenario, at 1st step the motor, inertia and generator reaches the desired speed and stabilize. Here generator has no load. Next, the motor is unplugged from energy source for couple seconds. Entire system still spinning/maintaining. Next, the generator output (current) is plugged to the motor input. Now generator tends to slow down due to the load to run the motor. As generator is connected to the inertia wheel, if large enough the drop in speed is negligible and it is the driver of the system. So generator is feeding the motor. Next step can be adding load to the generator. It will follow the same logic as previous step as long as load is not heavy enough to reduce the inertia speed and not exceeding capacities of motor and generator. I'm not saying that it will work for sure but it is a possibility and must be proven. Here it seems the key is to find right relationship between the motor, Inertia wheel and generator. I'm not in electrical engineering, so not knowledgeable about motors and generators behaviors. It won't work based on classic physics
They used a 4 pole generator, which runs at half the rpm. Notice their pulley ratios, he tells the sizes. Do the math and you’ll see the ratios. Yes free energy exist, well that’s what a friend told me. There are many other ways to do it also. Off balance wheel, self pumping water wheel, permanent magnet motors, and probably a few others. Or so a friend of mine told me so. FYI, you don’t want to patent anything considered free energy (over unity). Best wishes and hope you get it.
I wonder if you would get a visit from men in black and possibly disappeared for exposing such tech on RUclips. Dear government- I'm just a curious casual having a convo with other people. I'm dumb AF and wouldn't know the first thing about tech like this. Thanks for your concern and here's my 2 finger salute: ✌️
The detail you go into for these videos is awesome. It makes it easy for anyone who wants to try and repeat this experiment to be able to give it a shot.
If he does not make a fully perpetual motion magnet motor free energy device within 60 days, he and his children will face me on his doorstep(!), bECAUSE AM DONE WITH ALL THESE FUCKING BULLSHIT NONSENSE FAKE OVERUNITY,,FREE ENERGY AND MAGNET MOTOR DEVICES ON RUclips,BECAUSE IT’s JUST NOTHING BUT PIECE OF SHIT,,FUCK DAMNIT😡😡😡😡
Greetings . The problem that all these systems have is that the generator has braking due to Lenz's law. There is a way to eliminate the braking and it is placing a switched source at the output.
Hello my name is José Manuel, I am from Spain and I really like your videos, I am interested in making one, could you please tell me where to buy the axle, the weights, pulleys and the attachment of the weights and pulleys to the axle, thank you and a gretting.
Thank you very much Jose! I will add some links in the description in the next couple days hopefully that will help you find the parts. I know it can be very time consuming otherwise. It should be easier in Spain since you have only the metric system and not a mix of both:)
Hola yo también soy de España llevo muchos meses siguiendo este tipo de inventos, aportando ideas y también he intentado hacer algo, es difícil pero creo que se puede conseguir ahí buenos prototipos, pero hay que confiar en los imanes permanentes
The idea is awesome, the most poer used would be to start the machine, once in motion it coasts accelerating the generator. Run the the system on a solar power system, which the generator will surely charge and power a house with less work. I might be wrong but it is a great way to amplify what may be lost on rainy short sunshine days, in turn needing less panels to brink a 5kw system to life. Can work on a magne axle at another time when we have more time
Free enegery genergy works, but not completely free, we give less input get more 2 times more output, here we need to consider and use less rpm PMG , use bigger flyfeel, approximately per 1kw 40kg weight ,also use gear systems, also one more method, less rpm PMG ,bigger diameter gear, like we give more torque by less force, ( force *distance) , for eg .. We use extension rod for open a hard nuts, same hand ,same force, by increasing the distance of the rod we get more power
@@MarkusNenning I did some diy attempts to couple of different ideas in motor/generator topic. I can suggest that 1. there is no point in spending a lot of money on something that might not work (unless you have a lot of money and purchase of machine that does not work as expected is no problem). 2. Do a lot of experiments on basic components (self made windings, magnetic mechanisms and distribution of magnetic field in metals). Once you will be able to predict what strength of magnetic field you can achieve with inductor of certain size and winding numbers you will be able to understand all electric devices better. 3. Get an osclilloscope, magnetic field measuring device (up to 2000mT scale) and an Arduino microcontroller 4. Familiarise yourself with control of mosfets and microcontrollers its easier than most of people might think 5. In my opinion the most efficient generator that can be made is coreless - axial flux architecture (every stator core will attract the magnets on rotor and that will always cause loss of kinetic energy that is why I think coreless stator allows for maximum possible efficiency). 6. High efficiency generators ALWAYS require high precision and good quality components (good bearings, shafts and stiff and precise stator structure (this can be achieved with machined plastic)) if any gearbox is used then there always be some energy lost on gears - simple power transmission is best. 7. High voltage-low current devices should heat up less so high efficiency should be easier to achieve. 8. All the time spent on such projects will be wasted if there is nothing that we can learn from it for the future. If you understand principles of electric motor types and design you will gain something out of your project even if you wont achieve overunity and this is the most likely scenario. Ive seen really top class experiments carried out by the best diy experimenters and only some of these experiments were showing sort of energy gain but it can always be a measuring error. 9. Last thing is to get equipment for precise power output measurements. If you wont be able to accurately measure how much power is flowing out and how much is flowing in it will always be a guess work and not a proper experiment that proves something.
Select a permant magnet generator with lots of poles. "Lenz law" is why text books will tell you loading a generator with resistance of motor spinning it will not work.. no matter a flywheel or not. Example turn a car alternator by hand it spins easily...now connect headlights to it and it will be impossible to spin by hand as so much electromagnetic braking this is called a lenz reaction. No 1 problem to overcome in a motor generator system. You spoke of phase shift in sound, there can be a phase shift in time of manifest of electromagnetic back forces in generators that cause the lenz braking effect. Lenz only happens when generator is loaded with an electrical load. The time period it takes to become a strong enough reverse force on rotation of generator rotor is the time period you want a rotor of permanent magnets to rotate into position during this time period so that the rotor is pushed forward in rotation, speeding up rotor rather than pulled backwards, slowing rotor. Basically the time lag of the electromagnetic back force (lenz reaction) occurs precisely according to speed of rotor of permanent magnets so that the magnet that induces power into generator coils is not the one directly underneath the coil being induced, bit the UPCOMING rotor magnet of a reversed polarity, or the leading edge of upcoming rotor magnet in rotation of rotor rather than trailing edge. Now the generator rotor will speed up under loading instead of braking. Now it's possible to "loop" motor and generator and pull the plug from wall. Study RomeroUK Muller generator on RUclips. Study Thane Karl Heinz delayed lenz effect on RUclips too. So much fake free energy stuff on RUclips it's hard to find what's real. They do this on purpose to flood it with disinformation. Try a pancake washing machine motor for both motor and generator Samsung brand or fisher and paykel brand. Get them with 36 poles. You have chance of looping and having free energy motor generator with them. No chance with generator you have now as it will brake like crazy when loaded no matter what. The pancake motors much more efficient motor than what you have too.
Wind-powered alternators are low rpm. The larger the diameter the slower RPM''s needed to produce power. The pullies should be configured to work as leverage. 1:1 does nothing. DC motors are more powerful. A bridge rectifier from the alternator to DC motor works like a charm. From bridge rectifier to Ultracap just makes sense. The stored energy should be enough to run the DC motor and it is instantly charged by DC power coming through the rectifier. PS don't listen to engineer dude, he never invented anything.
You should use a 12 volt motor with a battery as well as adding a alternator to charge the battery. Works better and uses less power to run generator. You can also use a solar system with this to charge the battery as well as a wind turbine. With this system you can run all your lighting off 12 volt and all your plugs and appliances off the 220 volt generator. Been designing and building these for years. Also, the reason it will die as soon as you plug in your motor to the generator is because you can not ground them together. This is why you need two different systems to make it work. (motor, solar, wind, water, or battery) By using a motor with a battery along with a 12 volt motor, with wind and solar it will work because you have a belt running the generator. Nothing running between them to ground them together. You also would want to put a rubber mat under both the motor an the generator so they do not ground by the frame along with some bold inserts to keep them from grounding through the frame. If you make these changes, it will work. Always keep trying mate. We never learn if we stop trying.
Thank you James! I am currently working on getting all the components for a much smaller version to see if the concept works. Will try the batteries suggestion.
@@Bound4Earth Really, you do not say. That is the whole flaw of electric cars. Along with a few other flaws. I mean use common sense. You answered your own question by including the electric car statement. Use your brain. The other answer is you would not make any money in electric cars.
Oh yes!!! VFD variable frequency drive to run the drive motor!! high frequency = less amp draw! but i dont think its ever going to work on flywheel and motor alternator setup alone.. you need to use a battery (or a bank of expensive supercaps) to drive the motor and use a generator to rechage it at the same time! So here is the catlist in my opinion : Motor Generator Flywheel VFD Variable frequency drive for drive motor Battery to power the motor Inverter to step up DC from Battery to AC for drive motor
@@MarkusNenning please research gerad Morin, also Patric Kelly, there's a Nigerian plus an Indonesian ,they all show the real way That producing free energy with a generator is possible, I personally like the one from Nigeria you get a detailed description plus demonstration, your video makes it look like the claims are fraud ,please contact gerad Morin with your camera and interview him show him your videos, stop trying to distracted people
Love everything about this. I have been trying to make a high efficiency axial flux motor. I think this could pair nicely wth your project. They could be mounted directly to the face of the flywheel. And I think that's the goal with the whole thing. Minimize losses everywhere. But it sounds like you are already thinking of that in far more detail than I would have ever thought. Love your patent idea. And the use of machine learning for this project as well as trading algorithms ( would love to see a video on that) Keep up with the great content
Your spot on with your comments about the patent office and oil money. Heres a hint at making your machine work. Incorporate energy that is already free into your machine or your machine into it.
Thank You for the very helpful video. I have been looking at the same video's as you about these free energy generators the one thing I have noticed is the size and weight of the flywheels they are using, I is a 32" 120kg and the other is a 100kg and another is using 2x 200kg flywheels but can not tell what speed they are running them at, your 2x 45lbs weights convert to 40kg approx. So not carrying enough energy to keep it running.
Thanks Mark! Yes I have noticed that also but also keep in mind that most of them use a 10kW generator twice as much as my small generator. That’s why I assumed I should be ok with half the weight. The good thing about my design is that it can be scaled and I can add more plates. Just out of funds at the moment :)
great efforts. i have also watched those videos send to you by your friends and ive tried to gather what's needed, but you just put it to the test 👍 im sure one day we will find the right equation if balance or mechanical is the problem. if those guys proves it worked, then i imagine what they've been through to make it so. let's keep on trying.
Thank you Sammy! I agree this videos can not all be fake. Some invested large amounts of money on their projects and I don’t see any reason why they would claim it works when it doesn’t.
Hello. This fly wheel electricity generator is sorta free energy device. It can be an Ampere amplifiers while keeping the same voltage. Compare it to the transformer. You know the the transformer gives high ampere if the voltage goes low. So the fly wheel electricity generator can let the power companies send little amount of power to the houses. The houses will the amplify the input ampere. Look how much people will save.
"The laws of thermodynamics are often cited as the reason we can't have sustainable energy. But is that really true?" *Answer to your question* The Laws of Thermodynamics do not prevent you from creating sustainable energy. We have lots of examples of sustainable energy that do not contradict the Laws of thermodynamics. For example Solar Panels, Wind generators, Wave motion Generators, Thermal Generators, and electric Dams. None of these go against the Laws of Thermodynamics. However, when it comes to making claims of over-unity and free energy devices, then they contradict the Laws of Thermodynamics and therefore are not possible. *1st Law of Thermodynamics* *1.* Energy Cannot Be Created or Destroyed. If you can't create energy, then how can you have a higher output power than input power after going through all the losses (Heat, Friction, Lens Law,... etc). Since everything has losses and you can't attain a minimum of 100% efficiency, then free energy devices are not possible. Some people who have little background in Science or Engineering will claim "Laws are made to be broken." What they don't understand is that these Laws are not created by us, but by the Universe, we live in. IMO, it's more advantageous to work on improving efficiencies and other forms of sustainable energy, rather than try and build the impossible.
work on improving efficiencies, I have been saying this for years?!. for example, combining these ie solar, wind and hydro maybe even battery storage for peak hours etc. I mean just how many solar panels could the Hoover damn hold? These damns create massive amounts of air flow from the water coming off the damns, so catch that. You mentioned wave gens, there is another. Just how much could we upgrade the infostructure that we already have?!...
@@MarkusNenning It is just the only one's brave enough to invest is big money, like Elon. He saved Australia's power grid for a while. It's just going to take riskier investors and there has never been a surplus of them. They are the ones that make the biggest returns though...
@@MarkusNenning to get better results we must have to use all possible techniques, you can try with flywheel in between two magnetic wheels (using magnetic force to spin the wheel) watch results of using ++ and +-
If you want the math problem, I have shown in it, it is possible in only coil Pluss magnets but cooling is need to not over heat the magnets, because magnet give voltage at the being, but with coil will give more variable control to the generator.
Hello Ben yes I am sure you can. I have actually seen a great video that showed how to build one without a flywheel from a car alternator. Was it real or fake can’t be sure but looked realistic to me.
Hii Markus, I found your page while searching for free energy generation on the internet. My question is, how can I rotate the 650KVa alternator? Can you help with this. The diameter of the flywheel, how many KW motor can I rotate. It can be belt system or reducer.Can such a powerful system be built? Thank you very much in advance
Hi Dursun unfortunately I am no expert in this field. I still have not even figured out myself how to get my system to work :) Sorry I can’t be of any help
Hi Markus If I do not have electricity in the area to be able to start the generator it occurs to me to have a battery bank with AC / DC inverter only for starting after the generator comes into action, the charging stage is activated to maintain the batteries. I think it is a great project and I want to assemble it because I am in Venezuela and here there are many electrical energy problems. Greetings.
turn the shafts vertically and use magnet to keep the flywheel floating and reduce gravitational friction. Magnetic Barings help anywhere you can apply it.
I tried something similar. I could not get a real balance between the maximum power generated and the maximum consumption of the engine in load. Let's not forget that the energy we have at the end is the difference between the maximum power of the generator and the maximum current absorbed by the motor. It's hard, isn't it?
I think our Indian friends have done precise calculations and also they have modified the generator and the motor according to Tesla and Tom Bearden theory. People have patents on these devices. You have to find out what the modification is...Great work!
Hi, i liked you videos this are more interactive in such a signtificant way of scintifice method, and i wanted to learn also about a machine learning and how do i get started?
I tried it with 2 small electric motor and generator. I think it needs 2 batteries with a switch when 1 battery is charged switches to other battery because my experment wouldn't work. I mean when it runs both connected i would use 2 batt ....
if we just can make possible some source of consistent energy for 1.3 or more hp motor for proper rpm to rotate flywheel then all other issues will become secondary
Ya know…. all those free energy videos didn’t really specifically say they were producing electricity. The free energy they’re producing is the revenue from RUclips. A lot of those videos have many millions of views because people fall for it even when they should know better or do know better.
Schöner Gedanke. Warum kein 2 motor mit zirka 900 watt und der Erzeuger ~ 3000 watt und rad Energie nutzen 900.- 3000 Rest ist dann die erzeugte Energie die man dann nutzen kann machbar?
I just want you to thank for almost highly imformative explanation ever. I remember when I was a teenager. I had watch about some of the project of Mr. Langley. He is the one of the person who inspire me... as a follower count me as one of supporter as mankind is concern... Again Sir Thank you....
I know that you are extremely busy and you don’t have time to look at All kinds of stuff and determine if it will work. Due to the use of a magnetron I have concerns. Could you please look at this device and tell me if it will work and would it be safe? Thank you so very much for your time and understanding. Victor
I am as an engineer! The free energy generator can produce electricity for a few minutes, but the air resistance, the fraction, the gravitational force, these factors act on the free energy generator and finally stops the free energy generator. But if we calculate for the equation and keep some energy storage in between (I mean a powerful battery) in this way we can get power for long hours
Good morning, I have a VFD in which three phase induction motor is attached to and I have a capacitor bank to correct power factor lag. I want to know if it's a good idea to implement both power factor correction and a VFD? Thanks for your good work.
Some VFD’s already compensate for power factor and correct. Generally I believe that a phase correction will not improve the losses enough to make this generator work. But yes if you use a capacitor bank and you can verify with an oscilloscope that the phase shift improves then use VFD and capacitor together.
Wiring must be correct. Mechanical RPM must be correct. The phase of the motor rotation must be slightly behind the electrical phase of the generator, or in the natiral running angle without the belt holding the wrong angle to the gen. Your first video looked like there was EMF braking happening, as if it was wired wrong.
I really enjoyed this attempt you’ve made and still willing to keep looking into it. Please don’t give up friend, I’m sure there are lots of us hoping for success on this one day. I am a subscriber now👍
IMPORTANT: Try this out. I once had seen a paper that had information on how to build a FREE ENERGY/MOTOR GENERATOR. The motor/generator once started would keep running and you would get Free Over Unity Electrical Energy .The person had used Permanent Magnets and Electro Magnets with High Voltage Capacitors. With electro magnets and capacitors you can have a controlled magnetic field that stops the moment the capacitor is drained of its energy. With an all permanent magnet system you need to physically move one of the magnets away from the other or you get a clogging effect where motion of the rotor stops. By using electro magnets and capacitors or super capacitors you can have a controlled intermittent magnetic field. You can control the magnetic field with by an optical switch or better still with a solid state Hall Effect Sensor Switch. The electro magnet can be used as a generator to recharge the capacitor. You may need a diode to ensure the capacitors get the proper charging polarity. By switching a magnetic field on and off you can stop the clogging effect therefore the rotor can keep on turning and keep gaining momentum.
You can get free energy from magnets. You can also make over-unity with a mechanical battery with the capacitor. You can also get it from different temperatures or different pressures and basic vacuum physics! Something is always behind the energy... some might consider atmospheric static generators the only real free energy.
I just commented on your first video..... I beleive that your ideas of a sustainable mechanical energy system align very closely with mine. The fact that you mentioned freq drive control is blowing my mind right now. I too believe this can be achieved through such a system.
Its not him idea.
I came to realize that inventing something takes time, money, and energy (lots of brain power). Glad to hear it back so soon from you.
I know right it’s very time consuming.
And yes unfortunately all the components are pretty pricey.
Happy Thanksgiving!
The inventions and inventors already exist. It's about resources, funding and censorship (or lack of it).
Have you try a small motor with higher rpm to make the generator going a bit higher in rpm.......impulses from kinetic energy are very frustrating thing
This is easy to do. All you need are frictionless bearings, 100+% efficient motor and generator, a perfect vacuum, 100% efficient belt/pulleys, room temperature superconductive electrical components, and perfect dynamic balance. Easy!
And even then there would be only enough power to keep the thing turning. Any attempt to get power out of it would stop it. All these things are dreams.
@@andyhowlett2231 right!
Lol. This video us so full of 💩 i can smell it through the phone. No i dont have any on my hand 😏
And a djinn to flip the switch
Sounds easy enough Brad :)
Amazing Analysis, Deployed Worldwide Through My Deep Learning AI Research Library…
As an Electrical Engineer teaching Physics and Energy Transfer at the University is very sad to realize that so many people still believes in "Free Energy" or "over-unit Energy" or efficiencies above 100%... Detailed formulas and measurements have worked very well to explain all the electrical phenomena, loses, efficiencies and mechanical constraints. Please don't lose more time in trying to reach the impossible.
The problem is that people dont accept or understand that you cant produce energy. Energy is not a product which can be assembled or created. Its more the potential to do something and that potential is finite as far as we know and observe.
Totally Agreed with You . I don't even need to crunch down the numbers to see all the Flaws in the system . Every time I see these systems I come to a conclusion . I really don't think that people know what EFFICIENCY means at this point . Many people lost their entire life looking for something that don't exist . All these people should Focus on making a System more efficient
@@FoxRoxification Yeah it's part of Thermodynamics Law . Funny in some crazy sense . They think these laws were made for no reason 😂😂😂😂
Did you see that when these people get to a thing they don't understand they get to those Super complicated Technical terms ? Nano scale ? Molecular ? Energy is Vibration ? WTF ? what's a motor a generator and a Flywheel has to do with Quantum mechanics ? LMAO !
Agak pusing memahaminya tapi aku suka dengan video ini bisa menambah ilmu saya.... 👍👍👍
Your videos are so great! You're thorough and entertaining! Keep it up man!!!
Thank you very much Pablo I appreciate that positive feedback!
Hi If use ceramic bearings to reduce friction and different home build generator whit ceramic bearings
You have a generator running that uses ceramic low friction bearings Augustinas? You have a video by chance?
Thanks!
Force 1 (the motor) accelerates the wheel but load 2 (the generator + load 1) decelerates the wheel more than force 1.
Very cool design however. I think it might be useful if the wheel were big enough to be a battery and the generator could pull load off of the wheel over night, and the motor could spin it with solar during the day. The generator would need some sort of on ramp to initiate startup of the load, as well as releasing the generators shaft when no load is needed (100% efficient generator would solve this but all generators are not 100% as far as ive seen), as load is initiated friction is applied to the generator’s shaft until it matches speed with the wheel, and when load is no longer needed the shaft is decoupled from the wheel. If the bearings are really good, and the weight of the wheel and the speed of it is fast, and if it is in a vacuum, you create a mechanical battery!
Thank you for the feedback and compliment on the design Ghanzo!
When do we see the results of the upgrades?
I am working on trying different things including modifying a car alternator at the moment Latsimus.
we ,without a doubt , know there is over seeing faction that doesnt want energy giving for free. this includes fossil fuels. trillions of dollars, would be taken from these factions. not to mention the other kind of power. there has been thousands of invention deep sixed over the years. but, the most important thing , is to keep pushing these personal power alternatives . i really enjoy your site.
Thank you very much Ed!
Yup I'm sure the government already figured it out. Other governments to if electricity suddenly becomes free there will be a major problem with the economy as we no it.
@@adamreynolds1291 for sure and probably war.
@@MarkusNenning You're* all fast asleep . i can't explain without spoiling my own project potentially giving better funded men my idea before i'm finished.. 2023 ish .
Thanks for the effort.
Thank you!
Gear ratios should alow you to minimize power needed to start everything and maximize rpm to the generator giving you the most potential for this to work
Do you have build something like this? Can it really work? Thanks from Germany!!!
Gearing adds friction that can't be overcome
@@jonnyrox116 True but gears can add torque meaning you could in theory and more power generation units there should theoretically be a point were generation overcomes loss from friction and condutive loss the whole idea due to the laws of physics is a pipe dream but so was all great inventions to date
Very True JonnyRox!
Wann darf den die Menschheit darüber erfahren!
I like how you approached the idea and how you gave it an honest run
Thank you John!
Dear Bro. We've mentioned this before and look forward to hearing from you about this new video.
"If we place the Heavy wheel between two powerful magnetic wheels and magnetic force rotates the weight wheel according to the desired cycle, then we will definitely get good results.
I am working on modifying a car alternator with permanent magnets to see if that works. I will make a video about it once finished. Thanks Muhammad
There's a video is pretty old but it is still up the Wilkinson machine there's only one video there was never a part 2 ??? And I don't think that was because it didn't work !
I say take his gravity generator and make it a closed liquid system I know the 12 volt fuel pump in my car can run a couple of hours and not run my battery dead so I don't imagine it would use a whole lot of power to pump 10 gallons of liquid back 15ft in the air to a holding tank
I would say the output if it had an alternator/generator on it would run a 12 volt fuel pump and more
Thanks Mike,
I do have a video on an actual gravity generator you might want to check out.
maybe the solution is to use the generator positive with the external neutral or negative, does that reduce the weight of the generator?
Mr Nenning, you're engineering and manufacturing capabilities are impressive. I am a pursuer of free energy and have tried many configurations of magnet motors and other devices. The one that showed the most promise for me was the Luling motor out of Germany. I don't believe the online plans and info to be entirely accurate though, so I made a few carefully considered changes. Is there any way you might consider doing a project on it? I wholeheartedly believe that this design has the potential to deliver more energy than it requires to operate, but it will take a precise and steady hand to produce it. Let me know please. Thank you!
Hello Harold, first off all thank you for the kind feedback!
And yes I am interested in doing a project on it. If you could please send me more information on it so I can do some research on what kind of material is required. Connect@verde350.net
@@dusan78 I have tried to plug everything up to a toaster and several high wattage equipment.
I have also plugged in a second motor into the generator that uses more power than the one powering the generator.
That is proving that the generator is able to produce the required output.
I am aware that a generator under load works like a break. That except concept is used in semi truck breaks and electric cars.
I have not given up yet.
Thanks for the feedback though.
888
@@dusan78 thank you very much for your input. Appreciate it!
@@dusan78 Yes, while I agree with your statements except it seems that you're not considering the addition of inertia wheel (mechanical battery). Here is possible scenario, at 1st step the motor, inertia and generator reaches the desired speed and stabilize. Here generator has no load. Next, the motor is unplugged from energy source for couple seconds. Entire system still spinning/maintaining. Next, the generator output (current) is plugged to the motor input. Now generator tends to slow down due to the load to run the motor. As generator is connected to the inertia wheel, if large enough the drop in speed is negligible and it is the driver of the system. So generator is feeding the motor. Next step can be adding load to the generator. It will follow the same logic as previous step as long as load is not heavy enough to reduce the inertia speed and not exceeding capacities of motor and generator. I'm not saying that it will work for sure but it is a possibility and must be proven. Here it seems the key is to find right relationship between the motor, Inertia wheel and generator. I'm not in electrical engineering, so not knowledgeable about motors and generators behaviors. It won't work based on classic physics
looking at your set up and a variable speed controller would work on the primary motor as used in electric cars!!
They used a 4 pole generator, which runs at half the rpm. Notice their pulley ratios, he tells the sizes. Do the math and you’ll see the ratios. Yes free energy exist, well that’s what a friend told me. There are many other ways to do it also. Off balance wheel, self pumping water wheel, permanent magnet motors, and probably a few others. Or so a friend of mine told me so. FYI, you don’t want to patent anything considered free energy (over unity). Best wishes and hope you get it.
Thank you very much wynoose66
I wonder if you would get a visit from men in black and possibly disappeared for exposing such tech on RUclips.
Dear government- I'm just a curious casual having a convo with other people. I'm dumb AF and wouldn't know the first thing about tech like this. Thanks for your concern and here's my 2 finger salute: ✌️
please tell me where you got the weight (flywheel)?
thanks
CW
It’s regular 45 pound weights for weight lifting. Just make sure you get the machined ones so that the inside bore is accurate.
The detail you go into for these videos is awesome. It makes it easy for anyone who wants to try and repeat this experiment to be able to give it a shot.
Thank you Joshua I am trying
It helps that I enjoy making this videos:)
You done great job Mr. gentleman 👍
Thank you!
Waiting for next free energy video
Yeah, he just wasted our fucking time for nothing,just a bunch of nonsense talks and generic jokes,GGGGRRRR😡😡😡😡😡
If he does not make a fully perpetual motion magnet motor free energy device within 60 days, he and his children will face me on his doorstep(!), bECAUSE AM DONE WITH ALL THESE FUCKING BULLSHIT NONSENSE FAKE OVERUNITY,,FREE ENERGY AND MAGNET MOTOR DEVICES ON RUclips,BECAUSE IT’s JUST NOTHING BUT PIECE OF SHIT,,FUCK DAMNIT😡😡😡😡
@@johneysupergd7796 yeah i wanna see what adjectly happens. In Pakistan an Indian are lots of making this type video.
Greetings . The problem that all these systems have is that the generator has braking due to Lenz's law. There is a way to eliminate the braking and it is placing a switched source at the output.
Hello my name is José Manuel, I am from Spain and I really like your videos, I am interested in making one, could you please tell me where to buy the axle, the weights, pulleys and the attachment of the weights and pulleys to the axle, thank you and a gretting.
Thank you very much Jose!
I will add some links in the description in the next couple days hopefully that will help you find the parts. I know it can be very time consuming otherwise.
It should be easier in Spain since you have only the metric system and not a mix of both:)
Hola yo también soy de España llevo muchos meses siguiendo este tipo de inventos, aportando ideas y también he intentado hacer algo, es difícil pero creo que se puede conseguir ahí buenos prototipos, pero hay que confiar en los imanes permanentes
Thank you so much broo I made this energy power machine
Thanks!
Do you have a video of it by chance?
Please let us know as soon as you finish it . We really need to know if this thing will work or not.
If it's really gonna work I am going to make one.
Dream on.
@@jb-xc4oh everything is possible .
@@best_technician Now that's a tall order..!!
The idea is awesome, the most poer used would be to start the machine, once in motion it coasts accelerating the generator. Run the the system on a solar power system, which the generator will surely charge and power a house with less work. I might be wrong but it is a great way to amplify what may be lost on rainy short sunshine days, in turn needing less panels to brink a 5kw system to life. Can work on a magne axle at another time when we have more time
Free enegery genergy works, but not completely free, we give less input get more 2 times more output, here we need to consider and use less rpm PMG , use bigger flyfeel, approximately per 1kw 40kg weight ,also use gear systems, also one more method, less rpm PMG ,bigger diameter gear, like we give more torque by less force,
( force *distance) , for eg .. We use extension rod for open a hard nuts, same hand ,same force, by increasing the distance of the rod we get more power
Thanks for the feedback!
can u tell me these compounds name only these moters
I have a few links in the description.
Thanks
Can you explain Infinity Sav or Amber kinetic? That would be a nice video.
Thanks Artowar I am actually not sure what direction to go DIY or something in this direction. Thanks for the idea!
@@MarkusNenning I did some diy attempts to couple of different ideas in motor/generator topic. I can suggest that
1. there is no point in spending a lot of money on something that might not work (unless you have a lot of money and purchase of machine that does not work as expected is no problem).
2. Do a lot of experiments on basic components (self made windings, magnetic mechanisms and distribution of magnetic field in metals). Once you will be able to predict what strength of magnetic field you can achieve with inductor of certain size and winding numbers you will be able to understand all electric devices better.
3. Get an osclilloscope, magnetic field measuring device (up to 2000mT scale) and an Arduino microcontroller
4. Familiarise yourself with control of mosfets and microcontrollers its easier than most of people might think
5. In my opinion the most efficient generator that can be made is coreless - axial flux architecture (every stator core will attract the magnets on rotor and that will always cause loss of kinetic energy that is why I think coreless stator allows for maximum possible efficiency).
6. High efficiency generators ALWAYS require high precision and good quality components (good bearings, shafts and stiff and precise stator structure (this can be achieved with machined plastic)) if any gearbox is used then there always be some energy lost on gears - simple power transmission is best.
7. High voltage-low current devices should heat up less so high efficiency should be easier to achieve.
8. All the time spent on such projects will be wasted if there is nothing that we can learn from it for the future. If you understand principles of electric motor types and design you will gain something out of your project even if you wont achieve overunity and this is the most likely scenario. Ive seen really top class experiments carried out by the best diy experimenters and only some of these experiments were showing sort of energy gain but it can always be a measuring error.
9. Last thing is to get equipment for precise power output measurements. If you wont be able to accurately measure how much power is flowing out and how much is flowing in it will always be a guess work and not a proper experiment that proves something.
@@Kapalek84 thank you very good advice!
@@MarkusNenning good luck!
Select a permant magnet generator with lots of poles.
"Lenz law" is why text books will tell you loading a generator with resistance of motor spinning it will not work.. no matter a flywheel or not. Example turn a car alternator by hand it spins easily...now connect headlights to it and it will be impossible to spin by hand as so much electromagnetic braking this is called a lenz reaction. No 1 problem to overcome in a motor generator system.
You spoke of phase shift in sound, there can be a phase shift in time of manifest of electromagnetic back forces in generators that cause the lenz braking effect.
Lenz only happens when generator is loaded with an electrical load.
The time period it takes to become a strong enough reverse force on rotation of generator rotor is the time period you want a rotor of permanent magnets to rotate into position during this time period so that the rotor is pushed forward in rotation, speeding up rotor rather than pulled backwards, slowing rotor. Basically the time lag of the electromagnetic back force (lenz reaction) occurs precisely according to speed of rotor of permanent magnets so that the magnet that induces power into generator coils is not the one directly underneath the coil being induced, bit the UPCOMING rotor magnet of a reversed polarity, or the leading edge of upcoming rotor magnet in rotation of rotor rather than trailing edge.
Now the generator rotor will speed up under loading instead of braking.
Now it's possible to "loop" motor and generator and pull the plug from wall.
Study RomeroUK Muller generator on RUclips.
Study Thane Karl Heinz delayed lenz effect on RUclips too. So much fake free energy stuff on RUclips it's hard to find what's real. They do this on purpose to flood it with disinformation.
Try a pancake washing machine motor for both motor and generator Samsung brand or fisher and paykel brand. Get them with 36 poles. You have chance of looping and having free energy motor generator with them. No chance with generator you have now as it will brake like crazy when loaded no matter what. The pancake motors much more efficient motor than what you have too.
If it doesn't work ! it's not your fault!! love he way you put everything together!
Thanks Michael!
There's a free energy in Singapore that can absorb all the energy all over the place, it's atomic energy
Can we use gears to increase the speed of the fly wheel?
Wind-powered alternators are low rpm. The larger the diameter the slower RPM''s needed to produce power. The pullies should be configured to work as leverage. 1:1 does nothing. DC motors are more powerful. A bridge rectifier from the alternator to DC motor works like a charm. From bridge rectifier to Ultracap just makes sense. The stored energy should be enough to run the DC motor and it is instantly charged by DC power coming through the rectifier. PS don't listen to engineer dude, he never invented anything.
Thanks John!
How about using Halbach array setup to ultimate the magnet repulsion in one side would it help push the magnet in one direction ?
You should use a 12 volt motor with a battery as well as adding a alternator to charge the battery. Works better and uses less power to run generator. You can also use a solar system with this to charge the battery as well as a wind turbine. With this system you can run all your lighting off 12 volt and all your plugs and appliances off the 220 volt generator. Been designing and building these for years. Also, the reason it will die as soon as you plug in your motor to the generator is because you can not ground them together. This is why you need two different systems to make it work. (motor, solar, wind, water, or battery) By using a motor with a battery along with a 12 volt motor, with wind and solar it will work because you have a belt running the generator. Nothing running between them to ground them together. You also would want to put a rubber mat under both the motor an the generator so they do not ground by the frame along with some bold inserts to keep them from grounding through the frame. If you make these changes, it will work. Always keep trying mate. We never learn if we stop trying.
Thank you James!
I am currently working on getting all the components for a much smaller version to see if the concept works.
Will try the batteries suggestion.
Why would you include an alternator, this is a myth. If it worked, electric cars would include alternators and you would never have to charge them.
@@Bound4Earth Really, you do not say. That is the whole flaw of electric cars. Along with a few other flaws. I mean use common sense. You answered your own question by including the electric car statement. Use your brain. The other answer is you would not make any money in electric cars.
sir what is diameter of the flywheel you are using
Will have to measure it and let you know.
Oh yes!!! VFD variable frequency drive to run the drive motor!! high frequency = less amp draw!
but i dont think its ever going to work on flywheel and motor alternator setup alone.. you need to use a battery (or a bank of expensive supercaps) to drive the motor and use a generator to rechage it at the same time!
So here is the catlist in my opinion :
Motor
Generator
Flywheel
VFD Variable frequency drive for drive motor
Battery to power the motor
Inverter to step up DC from Battery to AC for drive motor
This guy is a faker
Yes agree would be nice to have all this components to experience but out of my budget at the moment.
Thanks!
@@dominicgeorge7299 what is it that you think I am faking? :)
@@MarkusNenning please research gerad Morin, also Patric Kelly, there's a Nigerian plus an Indonesian ,they all show the real way That producing free energy with a generator is possible, I personally like the one from Nigeria you get a detailed description plus demonstration, your video makes it look like the claims are fraud ,please contact gerad Morin with your camera and interview him show him your videos, stop trying to distracted people
@@dominicgeorge7299 thanks i will check them out.
como exemplo eu descobrir uma forma de usar essa energia sem uso de maquina, o amigo poderia me ajuda nessa questão?
Love everything about this. I have been trying to make a high efficiency axial flux motor. I think this could pair nicely wth your project. They could be mounted directly to the face of the flywheel.
And I think that's the goal with the whole thing. Minimize losses everywhere. But it sounds like you are already thinking of that in far more detail than I would have ever thought.
Love your patent idea. And the use of machine learning for this project as well as trading algorithms ( would love to see a video on that)
Keep up with the great content
Thank you very much Colby very much appreciate it!
I will try to keep up the content but it’s a challenge:)
Your spot on with your comments about the patent office and oil money. Heres a hint at making your machine work. Incorporate energy that is already free into your machine or your machine into it.
Thank you Speed smash!
Thank You for the very helpful video. I have been looking at the same video's as you about these free energy generators the one thing I have noticed is the size and weight of the flywheels they are using, I is a 32" 120kg and the other is a 100kg and another is using 2x 200kg flywheels but can not tell what speed they are running them at, your 2x 45lbs weights convert to 40kg approx. So not carrying enough energy to keep it running.
Thanks Mark!
Yes I have noticed that also but also keep in mind that most of them use a 10kW generator twice as much as my small generator.
That’s why I assumed I should be ok with half the weight.
The good thing about my design is that it can be scaled and I can add more plates.
Just out of funds at the moment :)
@@MarkusNenning ... Scale it up & sell it to the power company.
Then they can stop burning coal.
Have you considered ceramic bearings ?
One thing u said your self was u should be using exact torque specs these small things contribute to a well balanced system
great efforts. i have also watched those videos send to you by your friends and ive tried to gather what's needed, but you just put it to the test 👍 im sure one day we will find the right equation if balance or mechanical is the problem. if those guys proves it worked, then i imagine what they've been through to make it so. let's keep on trying.
Thank you Sammy!
I agree this videos can not all be fake.
Some invested large amounts of money on their projects and I don’t see any reason why they would claim it works when it doesn’t.
@@MarkusNenning the reason is always the same.....a fool and their money are soon parted
@@MarkusNenning views and youtube money, lol bless em.
@@MarkusNenning this video shows what you need to modify to make it work. ruclips.net/video/PB4w_fH4hgg/видео.html
If you make it can you please tell me how much it will cast thanks
Believers in free energy are on the same level as those who think the world is flat…..😂
Well believe it or not the world is actually flat I've seen it before. In fact I see it every day and it still looks flat to me... 🤠
@@3DLasers flat or not we have never left this rock
👏🏻👏🏻👏🏻
ALL energy is FREE. Do you pay for the Sun? Do oil companies pay for the oil they sell you? You just don’t know how to harness it..
Search " and you will find the reality. 🧐🧐🧐
Neodymium permanent magnet generator could help to make more possibilities in energy generation efficiency
I don't know if you know it seems to work well ..
Electromagnetic Generator - Prototype for 10kW - RUclips
Video - Infinity SAV
Daniel
Hello. This fly wheel electricity generator is sorta free energy device. It can be an Ampere amplifiers while keeping the same voltage. Compare it to the transformer. You know the the transformer gives high ampere if the voltage goes low. So the fly wheel electricity generator can let the power companies send little amount of power to the houses. The houses will the amplify the input ampere. Look how much people will save.
Nice idea! 👍
@@MarkusNenning thanks
"The laws of thermodynamics are often cited as the reason we can't have sustainable energy.
But is that really true?"
*Answer to your question*
The Laws of Thermodynamics do not prevent you from creating sustainable energy.
We have lots of examples of sustainable energy that do not contradict the Laws of thermodynamics.
For example Solar Panels, Wind generators, Wave motion Generators, Thermal Generators, and electric Dams. None of these go against the Laws of Thermodynamics.
However, when it comes to making claims of over-unity and free energy devices, then they contradict the Laws of Thermodynamics and therefore are not possible.
*1st Law of Thermodynamics*
*1.* Energy Cannot Be Created or Destroyed.
If you can't create energy, then how can you have a higher output power than input power after going through all the losses (Heat, Friction, Lens Law,... etc).
Since everything has losses and you can't attain a minimum of 100% efficiency, then free energy devices are not possible.
Some people who have little background in Science or Engineering will claim "Laws are made to be broken." What they don't understand is that these Laws are not created by us, but by the Universe, we live in.
IMO, it's more advantageous to work on improving efficiencies and other forms of sustainable energy, rather than try and build the impossible.
Thanks for the feedback Valveman12!
work on improving efficiencies, I have been saying this for years?!. for example, combining these ie solar, wind and hydro maybe even battery storage for peak hours etc. I mean just how many solar panels could the Hoover damn hold? These damns create massive amounts of air flow from the water coming off the damns, so catch that. You mentioned wave gens, there is another. Just how much could we upgrade the infostructure that we already have?!...
@@joespruill6447 exactly!
The question is why is it not done already?
The energy sector is a greedy business!
@@MarkusNenning It is just the only one's brave enough to invest is big money, like Elon. He saved Australia's power grid for a while. It's just going to take riskier investors and there has never been a surplus of them. They are the ones that make the biggest returns though...
How come if we use two magnetic reformed wheel beside flywheel to spin ?
Working on something like that.
Magnets placed in the middle of the flywheel.
@@MarkusNenning to get better results we must have to use all possible techniques,
you can try with flywheel in between two magnetic wheels (using magnetic force to spin the wheel)
watch results of using ++ and +-
what we are thinking we need high pulse magnets who can easily create force to spin heavy wheel
@@MarkusNenning if we could spin the flywheel by some kind of magnetic force then, there will be no more need of 1.3 hp motor as well
how about using motor with permanent magnetic inside ? should work.....
Can we use this generator 24X7...?
I see why not once it is working Honchui.
its not proven to work yet..
@@fidelcatsro6948 that’s correct it’s not confirmed.
If you want the math problem, I have shown in it, it is possible in only coil Pluss magnets but cooling is need to not over heat the magnets, because magnet give voltage at the being, but with coil will give more variable control to the generator.
can you make a generator without a flywheel?
Hello Ben yes I am sure you can.
I have actually seen a great video that showed how to build one without a flywheel from a car alternator.
Was it real or fake can’t be sure but looked realistic to me.
Mind is Belt driven and it works…
@@johncarreon8040 do you have a video John?
and is it possible to use a capacitor bank ? for giving a constantcity to motor?
In my opinion not Fahim.
The reactive power is not the reason it doesn’t work.
@Baker Perez horton thanks!
Exelente tu idea
Hii Markus,
I found your page while searching for free energy generation on the internet.
My question is, how can I rotate the 650KVa alternator?
Can you help with this.
The diameter of the flywheel, how many KW motor can I rotate.
It can be belt system or reducer.Can such a powerful system be built?
Thank you very much in advance
Hi Dursun unfortunately I am no expert in this field. I still have not even figured out myself how to get my system to work :)
Sorry I can’t be of any help
Hi Markus
If I do not have electricity in the area to be able to start the
generator it occurs to me to have a battery bank with AC / DC inverter only for starting after the generator comes into action, the charging stage is activated to maintain the batteries. I think it is a great project and I want to assemble it because I am in Venezuela and here there are many electrical energy problems. Greetings.
Yes that should work once the concept itself works.
Hope you’ll be successful!
Best of luck!
turn the shafts vertically and use magnet to keep the flywheel floating and reduce gravitational friction. Magnetic Barings help anywhere you can apply it.
Not as easy to turn vertically but yes that would be better.
Thanks
Great video. I really enjoy your channel.
Thank you Craig!
I tried something similar. I could not get a real balance between the maximum power generated and the maximum consumption of the engine in load. Let's not forget that the energy we have at the end is the difference between the maximum power of the generator and the maximum current absorbed by the motor. It's hard, isn't it?
Yes it’s not easy and may never work in this configuration but I am certain it can be accomplished somehow.
@@MarkusNenning We hope so
@@MarkusNenning 👍
Hey brotha, your content is genuine and much appreciated! Subbed!
Wow thanks very kind of you!
Much appreciated!
@@MarkusNenning Absolutely, thanks brotha. Happiness and great health to you!
@@cybersamiches4028 same to you!
I think our Indian friends have done precise calculations and also they have modified the generator and the motor according to Tesla and Tom Bearden theory. People have patents on these devices. You have to find out what the modification is...Great work!
Thanks Lazar!
Perhaps I need to take an other look at it
Hi, i liked you videos this are more interactive in such a signtificant way of scintifice method, and i wanted to learn also about a machine learning and how do i get started?
Thank you very much!
There are a lot of videos on machine learning online but best is probably a course or class if you have the chance to take one.
@@MarkusNenning How can i get one
I tried it with 2 small electric motor and generator. I think it needs 2 batteries with a switch when 1 battery is charged switches to other battery because my experment wouldn't work. I mean when it runs both connected i would use 2 batt
....
Did you ever get it to work?
Subbed due to your outstanding effort and honesty,Thankyou.
Thank you very much Bob cat!
Try with very low RPM permanent magnet alternator and keep rotation higher than it's rated rpm of alternator
So when is part 3 coming out
Not sure yet working on it.
Thanks for asking!
love it your explanation
Thank you Holly Good glad you liked it!
How come if we use solar plates for the energy of 1.3 or more hp motor to rotate flywheel ?
if we just can make possible some source of consistent energy for 1.3 or more hp motor for proper rpm to rotate flywheel then all other issues will become secondary
What program does the A.I tech use to optimize best outputs and trading solutions?
python financial modules can be used to build a customized AI for algo trading algorithms.
Is there a part 3 in the works? I think it is possible. Just needs the right parts and assembly.
Yes there will be a part 3 once I have it working.
Thanks Michael
Tanong po kung magkano ang free energy generator paano order thanks
Good video friend idea for have laiht in home or for machine or car etc thank from Argent
Thank you Alberto!
what does this package cost in total?
Jyri please watch till the end.
The generator is not working in this configuration.
Thanks
Ya know…. all those free energy videos didn’t really specifically say they were producing electricity. The free energy they’re producing is the revenue from RUclips. A lot of those videos have many millions of views because people fall for it even when they should know better or do know better.
Schöner Gedanke. Warum kein 2 motor mit zirka 900 watt und der Erzeuger ~ 3000 watt und rad Energie nutzen 900.- 3000 Rest ist dann die erzeugte Energie die man dann nutzen kann machbar?
I just want you to thank for almost highly imformative explanation ever. I remember when I was a teenager. I had watch about some of the project of Mr. Langley. He is the one of the person who inspire me... as a follower count me as one of supporter as mankind is concern... Again Sir Thank you....
Thanks very much Mhar!
I know that you are extremely busy and you don’t have time to look at All kinds of stuff and determine if it will work. Due to the use of a magnetron I have concerns. Could you please look at this device and tell me if it will work and would it be safe? Thank you so very much for your time and understanding. Victor
I am as an engineer! The free energy generator can produce electricity for a few minutes, but the air resistance, the fraction, the gravitational force, these factors act on the free energy generator and finally stops the free energy generator. But if we calculate for the equation and keep some energy storage in between (I mean a powerful battery) in this way we can get power for long hours
Good morning, I have a VFD in which three phase induction motor is attached to and I have a capacitor bank to correct power factor lag. I want to know if it's a good idea to implement both power factor correction and a VFD? Thanks for your good work.
Some VFD’s already compensate for power factor and correct.
Generally I believe that a phase correction will not improve the losses enough to make this generator work.
But yes if you use a capacitor bank and you can verify with an oscilloscope that the phase shift improves then use VFD and capacitor together.
I Thank you for good clarification,but what if we try pumping water to height with electric pumps the generate Electricity by hydro(potential)
Dos it matter if converted ac /dc current to the motor for the generator. Feel like your missing something but want to see it work so bad
Wiring must be correct. Mechanical RPM must be correct. The phase of the motor rotation must be slightly behind the electrical phase of the generator, or in the natiral running angle without the belt holding the wrong angle to the gen. Your first video looked like there was EMF braking happening, as if it was wired wrong.
🤔thank you Rich
Goodmorning i living in Florence i saw yours video RUclips about free Energy i ask you of do you sell that i Like to buy that
Hi Stefano unfortunately my system does not work.
Check out this video this is something that does work
ruclips.net/video/wqbJWBtoFMQ/видео.html
Please keep up with the awesome work.
Thank you fassphoto I will.
its good starting, the generator need to be permanent rotor ! or using a battery or cap connected to the core field
I really enjoyed this attempt you’ve made and still willing to keep looking into it. Please don’t give up friend, I’m sure there are lots of us hoping for success on this one day. I am a subscriber now👍
Thanks very much!
So is this free energy technique real with these engines?
It’s real but not working yet Riccardo.
@@MarkusNenning ok
Maybe modify the inside of the motor by adding magnets.
You're patent idea is interesting, have you written up anything to describe how this would be enforceable legally?
No I have not done that but I have used it in a similar way as you can see in this video.
ruclips.net/video/wqbJWBtoFMQ/видео.html
Can you build one for me?
Juan I have to get mine working first :)
@@MarkusNenning please let me know
what about infinity sav generator?
Maybe if you change magnet's in motor/generator for stronger neodymium. It should help.
You will need a flexible cuplink that will limit the vibration from shaft to shaft
IMPORTANT: Try this out. I once had seen a paper that had information on how to build a FREE ENERGY/MOTOR GENERATOR. The motor/generator once started would keep running and you would get Free Over Unity Electrical Energy .The person had used Permanent Magnets and Electro Magnets with High Voltage Capacitors. With electro magnets and capacitors you can have a controlled magnetic field that stops the moment the capacitor is drained of its energy. With an all permanent magnet system you need to physically move one of the magnets away from the other or you get a clogging effect where motion of the rotor stops. By using electro magnets and capacitors or super capacitors you can have a controlled intermittent magnetic field. You can control the magnetic field with by an optical switch or better still with a solid state Hall Effect Sensor Switch. The electro magnet can be used as a generator to recharge the capacitor. You may need a diode to ensure the capacitors get the proper charging polarity. By switching a magnetic field on and off you can stop the clogging effect therefore the rotor can keep on turning and keep gaining momentum.
Interesting concept. Thank you
hi sir i want a 30 kW generator can the greenery guy tell me how much it will cost this time
Unfortunately I can’t help you with that.
Thanks
Thanks for your nice explanation, you did better than others, but in the end, well get same same result " No free electricity "
Thanks Nabil!
You can get free energy from magnets. You can also make over-unity with a mechanical battery with the capacitor. You can also get it from different temperatures or different pressures and basic vacuum physics! Something is always behind the energy... some might consider atmospheric static generators the only real free energy.
Can you make a grid - 4 poles and wire with earth for static collection to store power for starting a fly wheel motor
I highly doubt this will work Denny