Installing Amazon ZXYRC Aluminum Portals on the Everest 10
HTML-код
- Опубликовано: 16 фев 2022
- well guy's I am very happy with these portals I did have to move my top links out as you seen and if I didn't have my winch mounted like I do I would have been able to mount the servo horn in the upward position but those little spacers worked perfectly so I am happy with it all If you want to get a set for your Everest 10 here is the link I purchased off Amazon you should be able to shorten the bottom links and use the stock chassis plates
ZXYRC Aluminum Front & Rear... www.amazon.com/dp/B09G369CR1?...
hope you enjoyed this video and it helps you out if you have been thinking about portal axles
Thanks for Watching hit that like and subscribe!!
Nice upgrades. The Everest 10 has so much potential. Thanks for sharing. 👍
Badass build.. I got the same rims🔥💣💯💯
Thanks love the axles they are really nice and adds extra weight down low where you want it I am working on a new build now and been working on my scale park getting ready for the summer!! thanks for watching!!!
Going to be a beast!
Thanks I'm hoping lol as soon as this storm goes by I will take it out lol. Rain next two days here
Great job dude..keep going👑
Thanks it's coming along nicely lovin' the portals
Those are awesome.....should really come with a grease fitting because it's not exactly like you're gonna blow out any seals by over greasing them
Lol yea that be nice if they did but it wasn't bad taking them apart and putting grease in them they have been really good and tough
Thanks for the video! Can't wait to see it run! I just ordered the dig transmission for mine last night. I hope to get to it next week. Depends on when it gets here. Going to AZ for a week on March 1st. I will shoot out a video whenever I can.
Nice I also ordered the dig tranny and new radio to control everything radio will be here tomorrow got about a week and a half for tranny but yea the portal install went really well except for the link position and drive shaft angle but little adjustment and good to go can't wait to run it out hopefully it's supposed to be nice Saturday as it is raining here now Thanks for watching and glad you enjoyed it I'm not good with build videos lol but I think I got everything that needed to be shown to install on a Everest 10 chassis
@@redneckrccrawlers9825 I am still learning to do videos myself. Sometimes I just want to build stuff. I end up forgetting to set up the camera at all. RUclips is helping me focus on one or two projects though. If I want to use the project for a video. That means I have to see it through to completion before starting a bunch of new ones. Sometimes I get so many projects going at once. I will completely forget about some. Hence the channel name.
Had me a set of those portals, the front was little loose on the driver side control arm. Used some loctite and tightened screws and greased parts. roughly couple days the pinion decided to grenade. definitely would highly recommend shims to help with the wiggle slight play on those gears, or you’ll end up like mine with crunchy gears. overall really cool just watch out for excessive pinion play
I love these portals best buy I did for the rig. Yes they come pretty much dry if you watched all the vid I did take them apart and greased everything really good and and yes I did have to shim the pinion on one of them I didn't show that on this video but yes they did forget to shim one of the pinions right so I did end up grenadine the the pinion. After shimming right they have been great love the steering angle and getting ready to order a stealth x tranny and overdrive
@@redneckrccrawlers9825 not to mention they add a lil bit of height almost giving it that “lifted” feel. I got me a second one for the front coming in. Gonna get shims this time!
@@RuckusHuckusYT yes the weight of them is really nice and definitely makes a difference I want to get another set for my next build
Bro im so glad that u doing the portal s , im getting soon amazon . did u order the redcat ones?
No these are the zxyrc aluminum portals for axial scx 10.2 link in description for them really well build with nice big gears
On the everest 10 i installed these and are great and heavy. What driveshaft are you using? Because the stock didnt fit well and have trouble as they strip
Yes the stock driveshafts do fit you just have to grind down the end just a little but I am using it the stock driveshafts pretty sure I showed that part in the install
Now the stock links will need either shortened on bottom or lengthen the top I think that's how it went lol maybe the other way to get your pinion angle better lol
Happy New Year check out my lastest video as I show how I did the driveshafts and the homemade frame
How much more turn radius did you get out of your portal axles on the Everest 10
I got a good bit more you can definitely tell the difference but I am going to be doing a comparison video in the next few days but yea it's a lot better and I love these portals
Do they make these for the 4 wheel streering?
You would have to buy two front axles an then you could do 4wheel steer
Cool man I was just looking into it I'm ordering these soon thanks for the response👍
You can order the axles and order these and put them on the rear axles as the housings are the same .I am getting ready to go out now have a quick test run with it video be up tonight
BOIU Aluminum Alloy Portal Front Rear Axles with Steering Link for 1/10 RC Crawler Axial SCX10 II 90046 90047 AR44 Axle Upgrade Parts,Red Front Axle www.amazon.com/dp/B09BN1M7DY/ref=cm_sw_r_apan_glt_i_T7JFB1HT44JZW232Y8HB?_encoding=UTF8&psc=1