Fork Seals - Yamaha Wr/Yz400/426/450 - NO Fancy Tools
HTML-код
- Опубликовано: 15 сен 2024
- Fork Seal & Oil replacement - 2001 Yamaha Wr426.
(Yz/Wr400/426/450 1997-2003. USD Forks)
It's been around 10 years since I bought the Wr, and in that time I've never done the fork seals.
Their was only one video out there, so I've filmed the steps required, to do Fork Seals with NO Fancy-Smancy tools.
Filmed with - Drift GhostHD and GoPro (1st gen.)
Edited with - Cyberlink PowerDirector14.
Pc used - i5, 8G ram, GTX760.
On location - CrashTestDummyTV research facility.
Sponsors/Supporters/Links-
www.bikemart.ne...
victorianmotorc...
- Other Fork Seal video -
• How to Replace Fork Se...
Thanks for watching & RSOT (RideSafeOutThere).
Mr.Falloffalot.
----------------------------------------------+---------------------------------------
ALL Rights reserved.
The contents of this video remain the property of its creators.
Use without consent, is forbidden.
This is hands down the best damn instructional video on fork seals on RUclips. How you only have 1500 views is beyond me! Helped me tremendously. Finished mine tonight!
Well Thankyou for the praise.
Glad it helped you, hows the Bike feel now? Better??
TFW & RSOT Dan >:)
MrFalloffalot CrashTestDummy TV - totally different and so much better! Thanks again. Great video.
Awesome video, just done mine and watched this step by step. Helps me out a great deal
Thanks Bogan, I'm stoked I could help.
Have Fun n RSOT >:)
Just undo your fork caps while there still in the bike 🤔😂
Omg! Thank you!!!! First time doing fork seals. That helped so much 🙏🏽 very informative
Glad it helped!
RSOT >:)
12:06 you're going to scratch the tubes with that hammer.
Was a risk, but didn't (Lucky for me though!!).
TFStopping by Matt, uRSOT >:)
@@MrFalloffalot because it must been BRASS HAMMER
Videotaping shit is the way to go. Taking shit apart is super easy...putting it back together...that's why I'm watching your video ;D
Hola excelente video.
Que medida es el caño platico que utiliza para hacer el trabajo de encastrar los retenes? Muchas gracias!!
Gday Jime, me alegra que el video te haya ayudado.
Estoy bastante seguro de que era de 50 mm?
Solo necesita un corte (alrededor de 3 pulgadas de largo). Tal vez obtenga uno más grande y más pequeño mientras está de compras.
Buena suerte, me encantaría saber cómo te fue con eso.
RSOT y feliz año nuevo> :)
Great video! Lots of help
Thanks Hyrum, I appreciate the feedback.
Have Fun n RSOT >:)
What did u use to wash them in
Gday Hosstyle.
I probably used ct14 (www.chemtech.net.au/degreasers/).
Ages ago I bought a 20ltr container of it. Been using it for years now.
It dilutes well, the more neat it is, the harder it will clean.
Hope that helps ya.
Cheers n RSOT >:)
@MrFalloffalot cheers mate will look into it
Nice!
Whats the length from springs at wr426f forks?
I couldn't find it. Sorry.
But I did find a bit of reading for ya, all about the Wr/Yz's suspension setup by Teknik.
Enjoy the Read, hope it helps (??) - www.teknikmotorsport.com/Yamaha-WR-250F-450F-Suspension
Thanks for stopping by kostas, uRSOT >:)
Cuantos mililitros se le echa a cada barra invertida?
Se recomiendan 80 - 135 mm para la medición de aceite desde la parte superior.
Volumen de aceite No estoy seguro, 2 formas de hacerlo, medir desde la parte superior o el volumen de aceite.
¿Es eso lo que necesitabas?
Saludos & RSOT
> :)
Encontré un comentario en un foro que decía que les dijeron 575 cc por tramo de horquilla, pero que solo habían usado 475 cc.
Compro botellas x3 de 500 ml, PERO la tercera botella se usa en el próximo servicio para compensar la pequeña cantidad adicional que pueda necesitar.
Espero que ayude, pero es una medida con una regla que es la clave de esta tarea. > :)
@@MrFalloffalot muchísimas gracias,
Disculpe otra pregunta que es o como se llama el plástico que lleva debajo del tapón de la barra la que va adentro de vasito del fierro
@@xlmralexislx8836
Lo siento, pero necesitaré un poco más de información.
El traductor de Google tampoco ayuda ...
>:/
@@MrFalloffalot What is the name of the plastic or ule that carries the bar at the top below the cap
Hahaha "ye thats tight"
You're busted! 👮♀️ Milk Crate Police
They used to fine (waaay back in the day).
I did read somewhere 'Milk crates are the most stolen object', for re-use around the house/work/job site/etc...
I think their are tooooo many 'Re-Purposed' ones to fine people now.
TFstopping by, uRSOT Drew >:)
How much labor did you save $200-$300? Yes fork oil stinks. You cheap ass not installing new dust covers :) Electrical tape works well too if you have no cling wrap.
Experience is more valuable than time-saving to me. If I could peel a dollar into layers, I would. Make it go even further...lol
TFW Nev >:)