BEST Speedometer Relocation for Club Style Sportster with T-Bars | Iron 883 Sportster Build Ep. 11
HTML-код
- Опубликовано: 7 сен 2024
- Speedometer Mount (Black) - amzn.to/3fpfpVG
Speedometer Mount (Chrome) - amzn.to/30FRLQK
Dual Gauge Mount - amzn.to/3mtypaT
Speedometer Mount Bolts ( 5/16-18 x 3" Grade 8) - amzn.to/2MYa2AL
----------------------------------------------------------------------------------------------------------------------------------------
Krator Quarter Fairing - amzn.to/37yev6x
Bung King 39mm Quarter Fairing Brackets - amzn.to/3fpQnFZ
Mustang Fastback Seat (3.3 Gallon Tank) - amzn.to/30IPyDY
Shinko 777 Front Tire (non-reflective sidewall) - amzn.to/3d5JEj5
Shinko 777 Rear Tire (non-reflective sidewall) - amzn.to/30Jlfgr
Progressive Suspension Fork Springs - amzn.to/3d8QILE
Fork Cap Tool by Motion Pro - amzn.to/2N3ezSi
Wisamic LED Headlight - amzn.to/2C20ySD
Smoked Turn Signal Lense Kit - amzn.to/2YAGZIY
I used 13mm deep well sockets for the riser for my speedo. Worked pretty good and the chrome matched the bike.
Two great ideas in one f'ing video. Thanks, to you both!
Do you remember what length bolts you used?
Man, you're awesome for this. I have an old Sporstster 883 from like 1989. I used to hate the headlamp visor but now I see it as a blessing since now I can mount the speedometer to it instead of having this big goofy unicorn horn looking thing sticking out of the handlebars and ruining the lines of the bike. I couldn't find any good speedometers or speedometer mounts that were a match for the bike or that wouldn't overly complicate things.
Once again, thanks a lot man! Gonna take this on as a little step that'll make a big difference on my project.
J M Awesome, I’m glad you enjoyed the video!
A year later .... I just watched this VID , BADASS ! , OK New Subcriber because you took the time to film something different for us Sportser Enthusiasts , ordering this now online for my 2016 Sporty 72 ! , thanks bro 🙏.
Keep em Coming 💯👌
this video helped me out quite a bit. i want to relocate my gauges down to the headlight eyebrow mounts but wasnt sure if the bolts would line up. Good to know i just need to modify the gauge mount holes slightly to make it work.
When working on a Harley Davidson there should always be old school Southern Rock playing in the background lol 👍🏻👍🏻👍🏻
Thanks dawg I had the same idea I was just missing the spacers, about to head to Home Depot tomorrow
3/4 heat shrink over the aluminum pipe would work also ace hardware sells 2”bushings that would work well
Looks good with the fairing installed. Roland Sands make a speedometer relocation bracket that lowers it down on top of the headlight, but it's expensive.
The pipe will work. But I would suggest to go to a steel shop and get stainless. My buddy kinda did what you did. And he had problems with vibration and had to keep tightening or replacing that length all the time. The stainless has been a lot better
Thanks for the suggestion
Nice video guys, thanks. I was wondering if this mod will work on a 2000 Sportster 1200 custom with the chrome riser and a bunch of cables and connectors hidden behind it? thanks in advance
doing this today on my 22 sportster 🙏🏽
Bung king custom risers has the option for a low or high mount welded directly to the bars low mount is about 2 inches up from the bottom and high mount is about 2 inches down from the top
I’ve been trying to find pictures of those on the web on a sportster and can’t find shit. My girl has an iron 883xl and she wants them in 8” pull pack but doesn’t know which to order. And if more wiring length is needed for the gauges to mount in high or low position
@@palmettolowlife1996I searched for pictures too , finally just took a chance. I didn't need any extra wiring for my speedometer with the low mount the speedometer sits very close to the top of the headlight housing.. I would imagine you would need extra wiring for the high mount but I don't have it so I can't say for a fact and also I would think a higher mount would be better for a shorter rider that can't see over the bars and down like your looking at the top of the headlight
@@WARPED._.VISION awesome. What model year& model bike do u have & which bung king risers did you go with? (Height , pullback, wire holes etc )
How tall are you?
did you need to order any other brake or clutch cables too?
Any other recommendations with that setup you can think of?
I think she’s gonna get a Memphis shades road warrior fairing and my try a plex System install down the road.
Appreciate all the insight and help!
@@palmettolowlife1996 I have a 2004 Harley Davidson xl sportster 1200 roadster ..Im 6"1" I went with the 10 inch bung king risers 2 in. Pullback and I put the bung king high bend bars on so total of around 13 inches tall ..internal wire through bars and risers ...I did put a longer front brake line on( mine is dual disc front brakes) I order that through Magnum shielding they have several color options
@@WARPED._.VISION you are awesome! Few more questions.
Will the risers work with the oem handle bars?
If so, either way, Will we need to order a new top clamp ?
And how does the oem gauge connect? Mine has 4 hole bolt pattern but the pics I’ve seen on the risers just has two. Does it only use the two on the oem ? Or is there another part to order as well?
Definitely need your need haha I bought tbars and having this problem
Very Helpful vid thank you 👍👍
I love how the guy in the black shirts snatches things from the other dude’s hand 😂😂.
😂😂😂😂 he was just as desperate to be done as rhe first dude
Does anyone know if you use drag specialties risers can you mount the oem speedo?
Followed your guys lead and did pretty much the same thing for 05 XL1200C.
I have on 04 xl1200c and I just ordered this mount. Does your 05 have the same style indicator lights as this video? Mine doesn’t and not sure how to mount them.
@@andrewh4146 I had to modify the mount, pretty much dremel and bastard round file.
Ez fuse tape around the tabs and wires to clean it up
Definitely doing this thank you.
There is a side mount kit, left side, below tank......talk about cleaning up the handlebar/headlight area.
Do I really want to look a my knee to see how fast I'm going?
@@scottdouglasmaclachlan4792 Its more like looking a little left of the gas cap.......no, I don't want it there, but if you want to clean up the handlebar/headlight area that'll do it.
Great video-can you please share the link for the gauge bracket?
Where did u get the plastic light cover at (turn signals, oil , neutral etc)
I have been trying to figure this out! Any recommendations are greatly appreciated.
@@jordanmichaelday I found it at harley its for a newer sportster but it works oh don't forget to order the 2 little screws to they don't come with it
Could you've used the stock speedo clamp ? (Yeah 2 empty holes or machined and repainted out)
Link for the speedo mount
Link in the description!
Is the speedo a 4 inch speedo? I just want to make sure it will fit my bike!
How long was ur bolts an how long was the pipe extension u put in this is definitely the route I’m going
Great video! My bike has the 4 inch riser and l been looking at bar options and way to mount the speedo which isn't down on the left side. How may miles do you have on your Shinko tires? How are they holding up?
GixxerFoo I got shinkos on my sportster. I love them. Great price too
Will this fit on a 2007 Nighster also ( gauge is 95mm)
What if I have a sportster (xl1200cx, 2017)... have an mx style bar and just want some rise(like 8"risers and about 2" pullback) but dont have a headlamp fancy thing... how do I use that bracket?
I’m running the Harley cafe small faring. Would the speedo get in the way of that?
What size cables did you go with? Throttle, idle and clutch.
This is something I'd definitely like to try. Thanks for the video! What year is your bike? I've got a 2013 and checked JP Cycles for the bracket. It doesn't technically fit my model year, but if it's just a matter of widening the holes, I'm game. Also, have you noticed any substantial rattling?
Mine is an 09 which the mount is not specifically listed for either. At this point a lot of parts on the bike aren't technically for my year or model. No rattling with the mount. I just made sure to use a grade 8 bolt cause I've heard of weaker ones snapping.
What is the guage housing you are using?
Hi,what handlebars are those? Thanks man
Kostas Giakoumas 14 inch San Diego bars from Lucky Dave’s
What is the length of the tubes that you use to mount the new speedo mount? I have that mount, but i didnt have that measure, and it is no tighten
@twins moto garage
What mounting kit did you use for your quarter fairing ?
I don’t know the name of the style on this bike. This style left the docking hardware on the tubes when the fairing is removed. I would recommend the Bung King brackets paired with quick detach clamps.
Links in the description
Does anyone know what bracket he’s using for his indicator lights (neutral, oil, left and right turn signals) ? I bought this gauge mount but it doesn’t come with a bracket for the indicator lights. I’ve looked everywhere.
It’s all the same parts from the stock speedo. I just took the stock one apart and put it back together on the new gauge mount
Hello guys! Does anybody know if i can find the dimensions and the drawings of this speedometer. I want to give it a try and print it on 3D printer. Thanks in advance!
Or this video applies to certain Dyna models. For example my instance an 07 super glide FXD with that kinda speedometer instead of being on the tank as other superglide models
Will this work on a 2020
Not familiar with the 2020. I’d say if your speedo has that mount or can fit in that mount that it can be done. Maybe someone with a 2020 could chime in.
Brooo! I relocated the speedo on my dyna and now when i plug it in it automatically goes into the fault mode without the key on!! Anybody know what i need to do? Greatly appreciated
Did you end up figuring it out?
What bracket is that please?
Did u have to replace brake and clutch lines???
Elmo Lopez Yes in episodes 13 and 15.
Where do I find the top bar mount with built in speedometer? Cant find one anywhere...
ebay
Hi! Which length of tube and bolt you use?
I want to say it was a 3 inch 5/16 coarse thread, grade 8. I just replaced with a zinc coated bolt from home depot cause first ones were not rust resistant.
Whats the lenght on the new bolts used? Thank you 🔥🔥
( 5/16-18 x 3" Grade 8) Link in the description. Home Depot also has em
what year of bike ?
This was on an 2009
What fairing is that? And how did you mount it?
Quarter fairing from Amazon. Bung king makes the brackets. Links in the description
@@twinsmotogarage1866 and then did you use the quick disconnect clamps? Or did you get the clamps that tighten on that arent quick disconnect
What year is your sporty?
Where did u get the speedo mount at
Link in the description!
Where can I get that speed mountain bracket
I got mine on Amazon. J&P Cycles also sells one.
What rise bars are those? 14”?
14 inch Lucky Dave’s San Diego Bars
@@twinsmotogarage1866 30” wide?
Man those bars look like A##!
You got a link to that speedo mount?
This t bar is terrible
Sorry man, ma fa schifo