I would actually like the next MGEX to be the GP01, and have the PG gimmick of both armors included and can be easily swapped out, maybe even include some manga only stuff like the long rifle or the chobham armor.
Wow, finally someone who had same thought as I do! I have a feeling since Bandai was NOT releasing ver 2.0 or ver Ka for MG GP-01 Ground type or FB (Rumour was that the 20 year anniversary ver ka was supposed to be GP-01... which ends up to be a Zeta Ver Ka which Bandai tries to make it look like old TV proportion?!), I felt maybe Bandai is not going to release an updated version of GP-01/FB on regular MG line but as an MG Ex convertible kit...
@@kennychan7104 The thing is that the MGEX so far are based on the more popular series. I imagine it's more likely to have a convertible 00 than a convertible GP01
Just started building mine and I can't lie about being a little disappointed at seeing only a few runners actually plated gold. The amount of detail, part separation and looks are out of this world but not worth more than 3 MG's. But I bought it because I'm a lover of the building part of the hobby so new complex kits like these get my blood pumpin'. I'll paint all of the armor and some of the mustard gold but honestly the plated looks fine to me. Kind of reminds me of the Hyaku Shiki in that it does not need to be as expensive as it is but Bandai will be Bandai when any amount of extra work goes into runner or 2.
The main reason for the cost is that there's still a lot of work that goes into making it. Do not forget that it's still superior to a lot of PGs that are put out and comparable to the PGU in terms of quality, just smaller. The only major points of weakness are the hip joints that connect the rail guns and where the two sections of the wings join together. They definitely could have done better though. No stand for the funnels is the most disappointing part.
Absolutely! The engineering is bonkers on this thing. I hope they adopt some of these on a simpler scale for future MG's. I think of this line as a flagship base for them to make cooler stuff down the road. I can see this thing going on sale to
@@AstreaGT Unfortunately, I doubt the price will drop by much. The MSRP of the MGEX Strike Freedom is $180. Plus shipping is usually going to be $30+. I don't think it will drop below $220. I also do not think the special coatings will be a normal thing. Just look at how few Clear Coats and Titanium Coats get produced. It's probably a logistical nightmare. Combine that with the higher price and it's far less accessible. Special coatings on even less premium stuff is already $100+
first time checking out your channel, this review was honest and realistic plus loved that you took into account the average builder. Earned an immediate sub!
Pretty on point review. I know most of the guys here are also builders with painting skills. To me as a straight builder, this thing is good enough to be on my collection. I'll admit that it broke the bank for me but as Seed fan, I couldn't let this one slip like the Titanium finishes for the MG Freedom 2.0, Justice, Providence, and Perfect Strike RM.
I'm a straight builder as well. I've done stickers some of my RGs (this takes almost as long as the actual build for me), but I've struggled like crazy with MG Waterslides due to my shaky left hand. What makes the MGEX Strike Freedom so good is that the color separation essentially makes it a prepainted model that requires almost nothing else added on to look good. Those clear red pieces are my favorite. The one thing that does disappoint me are those thin metal etched stickers that are exposed. I've already lost two of the smaller ones somewhere because they simply just fell right off.
I’m a straight builder too I try to panel line but some of the parts it’s tricky to do or it’s too small parts sometimes I go a bit ocd if I don’t have enough volume of ink on a certain spot but decals I’ve been starting to apply more especially the HG FA Gundam that was has a lot of correction stickers
@@Viper-jr4sp Honestly there is only few to panel line really. The part/color separation are good so some of them don't need to be panel lined. Also like that it doesn't require too much decals like going full VerKa style decal nightmare.
I've got both an the 2.0 is amazing it's solid as a rock I honestly wasn't even going to buy the mgex but I thought I'd atleast try an got one of 6 that came in an it's an badass kit but price wise you get alot for the 2.0
Any of the pure gold kits like Hyaku Shiki and Unicorn Phenex will have a better gold coating that makes it shine. But, the point of the MGEX Strike Freedom is the color separation, which works out a lot better for its overall appearance. Granted, a Titanium Finish on the pieces that are the pure gold color would have made it a lot better
Been watch your channel for a while always saying that ill buy a kit and build one in the future and while at Target I saw the they were selling some cheap kits, like $20ish, bought it. The process was confusing at first but eventually I understand. It's was such a relaxing experience and would definitely buy another one, but will never do the advanced stuff.
Ya know, Im not in ay way familiar with ANY of these models but GAWD DAYUMM will I watch your videos just to get a glimpse of that hangar. 12/10. Will continue to watch these videos!
Yea if it wasn't for the fact I already did the fortune meow one, I'd would've gotten that one. Appreciate the review, it makes me feel good about my decision and holding back the FOMO effect lol
I bought the mgex Unicorn back when it dropped and its still in the box. Not that I dont like it I just havent been that excited to build/paint it. I was not interested in the slightest for another SF with some fancy gold. I know they only dropped this because of the Seed 10th annivesary. Hopefully the next one will be more exciting
I mentioned this in Zakuaurelius' comments once. Completely agree, MGEX immediately peaked with it's "extreme points". The only other aspect that could be pushed to the extreme is "size". It's opens the door for insane 1/100 of fan favourite kits. Imagine a MGEX Kashatriya with the size being the selling point as an excuse to make it. Bandai would be printing money if they find a way to produce something like that.
@@user-sp9po5qi9q I really had hope that the mgex line would give bandai the opportunity to make kits that have long been wanted by fans, and that could have justified the price for something like Kashatriya even. I understand the Unicorn getting the treatement, the LED system is revolutaionary for them but I would like to see something completely new even for MG
While you may not be a fan, the MGEX Strike Freedom is actually quite an achievement in terms of engineering. The focus of the fancy gold and metal coatings actually undermines several major accomplishments that it has achieved. It creates a much better straight build that does not require any painting or panel lining. The most important thing is the miniaturization of the features of the PGU RX-78-2 frame assembly and the addition of preformed 1/100 hands that are comparable to older 1/60 PGs. If this ends up being the process that is used for future MG kits, they would have a lot less problems and have a lot more consistency. But, the part that impressed me the most are the clear red pieces and I do hope they use the technique to produce the clear red pieces on the MGEX SF for a future clear kit. At a distance, it still looks like a solid version of that color. Up close, You can still see the insides. It's the best of both worlds.
@Kevin Li oh I won't argue that at all. The SF is definitely peak MG enginuity. Much like the RX-78-2 3.0 was back when it dropped. I would very much enjoy building MG's more often if this level of engineering and dedication were put into all MG's at some point. However that being said, I would much rather kits like this stay as the gold standard line of MG and not try and bleed it into regular release kits because that would increase the price of MG's even if they could cut cost down by continuing to find cheaper ways to do it. At that level MG's would be a minimum $100 or possibly stay the price the MGEX line already is. Iv also had 4 MG versions of the strike freedom over time along with several versions of the other lines, that's why I'm not really interested in buying another haha. Hopefully the next one is one I would like to build that's completely new to me
@@foreverfornever1124 I understand. I have the SF in MGEX, PG, RG, and HG. This is not counting the freedom in RG, HG, and MG. But, I'm a sucker for most SEED kits. The main issue is that the PG, RG, and MG lines are already starting to bleed together with the size being the main difference.
I bought the original no grade 1/144 Strike Freedom a few months ago and hoping to paint and decal it with the MGEX as the basis. I love the look of this kit, but the price is a lot for me. Hopefully I can make a no grade statue look pretty good.
The no grade Strike Freedom is pretty rough. Everything from the pre-2010s is pretty rough nowadays. Even the newer $20 HGCE one is already a lot nicer. The RG one at $35 is pretty good too.
I thought outside of the B and D runner (plated gold) everything was injected molted; and did not need to be stripped. What other runners/parts on the kit need to be stripped before painting? Please let me know, thank you! Also I plan on just dunking this and a mg hyaku shiki 2.0's gold parts in a tub of IPA -- never stripped gold before, and advice?
I have it preordered and it has a January shipping date but it looks like that’s not going to happen. I’ve had several chances to purchase it on Gundam Planet this week but I can’t cause then I would have two on order. A little annoyed because I paid upfront for the preorder and I can’t cancel it.
ah so it is that weird colored weak plastic that the MG Full Burst also suffers from :( thank you for pointing that out cause that makes it a no for me, I broke parts wile building the full burst (first and only kit where that happened) and then just more and more joints ended up breaking...most of which I have no idea when or how it broke but upon taking the armor off yea a part that was once 1 piece is now 2 pieces >.> and with the joints...i gotta say my MG sinanju's shoulder joint was impressive as hell that it didn't split, think I had 7-10 coats of paint on the arm peg and it still didn't split the part that it go's in to (I had it 1 hand holding up it's gun with the rocket launcher attached and extended on the gun... which it could actually do...better when on the ground as yea...massive imbalance :P but when I decided to give it a high gloss top coat I broke the peg on it's crotch that go's in to the torso ... i guess it may have been under a lot of stress from holding up the gun/rocker launcher combo for a year or 2 :P) but I remember the full burst splitting the part on the arm that go's on the peg just by assembling it >.< never a great experience when basic assembly requires glue because the plastic is brittle as all hell (the creamy "gold" stuff), only kit I had to use glue on other then the High Rez Wing Zero Custom aka the hand grenade.
I broke a part on my psycho zaku & the HG areal gundam so I have been on edge. I also forgot to point out people breaking their waist joint for the MGEX, another thing I watched out for. The wrist swivel is already tight without paint, with it it's almost impossible to move.
STRIKE freedom! It bothers me, mostly because I prefer the freedom’s design to the strike freedom but to also acknowledge that I’m being nit picky I do know that the show doesn’t really make a difference between the two as Kira and all the characters just refer to the gundam as freedom… But it’s still the strike freedom
I had a chance to buy it and passed.Wound up getting the iron blooded coating Barbatos, age-1 wear system set and the ew wing clear for about the same price.
I’ve been debating on getting this kit but the price errr i don’t know if I can justify over here in Canada it goes from anywhere from 205-250$ CAD and if you include tax and shipping it’s close to 300 one place near me has it and in total it’s 235$ but is it worth it I can easily get 3-4 MGs for that price I love the Strike Freedom it’s one of my favs but I don’t know if I can blow through a huge chunk of my wallet on one kit which will eventually get released more often later on or do I go for other kits that I genuinely want right now I’m looking at getting the MG RX78 2.0 MG Sinanju Stein Ver ka and the Heavyarms
I've gotten this recently on my b'day on December and I was very happy I'm fine with how it looks, but the price is definitely expensive, my only problem is the moveable fingers and it's annoying, especially the etching stickers.
I'm really grateful you had the wherewithal to give this a fair shake, and not just coom over it like so many others. Did it come with waterslides? I noticed you didn't stick any decals.
The kit still has a lot of achievements, but its greatest ones are covered up by the people who paint over them and end up missing the other color features brought by the kit like the clear red pieces. I really want to see a Build Burning using those clear pieces one day. It has a few waterslides. The big one is the logo on the shoulder and there are a few more, but not that many due to the metallic and etched stickers being included too.
I like the direction mgex is going except a few gold runners that should be painted and the inner frame should be made abs + pc. I miss the older mg models with solid inner frames. Articulation is great and details are spectacular.
I want one of these so badly but they are absolutely unobtanium here in Europe, it will be years before I can find one and that's if I'm being optimistic
There's an MGSD version of Freedom already. But if you want real waifus, it's the SD Gundam World Heroes. The Qiongqi Strike Freedom is a beautiful mess of its own. There's also the line of MS Girls if you want actual waifus though.
If you're talking about the PG Strike Freedom suggest you stay away from it. It's $100 more than the MGEX and worse. All you get is size and I would even argue that the RG Strike Freedom is already superior to it. The PG Perfect Strike is good though.
The MGEX Strike Freedom isn't as bad as the video makes it out to be. People were expecting a visual spectacle, but the most impressive things don't stand out as much. The kit's features aren't as visually impressive like the MGEX Unicorn's LED strip, but it is still a great kit. It's leagues above the old PG Strike Freedom that costs $100 more than the MGEX SF. While it isn't gold plated like a Phenex, it still does its job with its color and essentially comes pre-painted. The miniaturization of PG and PGU features like the posable fingers, the metallic and etched stickers, and the complete inner frame are very well done. I just wished the pieces that the railguns and the wings connect through were better. That is where the real weak spot of the kit lies. My favorite parts are the clear red pieces because they look solid from a distance, but you can see the details up close. I'm really hoping to see a clear kit in the future that uses this.
I would want one of these but I put so much effort on my mg deluxe strike freedom gundam and I’m too damn lazy to work on this version but still want it though. Honest review👍🏼👍🏼👍🏼👍🏼👍🏼
They did with the PG Strike Freedom and that was arguably the best part of the kit. The problem is that assembling those hands are a nightmare, which is why they reverted to pre-formed hands in all the other situations.
Was gonna bit the bullet and overpay for this, but given how much cost saving Bandai did on this kit, I think I'll do my own cost saving too. The injected gold ruined it for me.
It's already overpriced so imagine how much more overpriced it is when trying to buy this without a local retail store, it's the only reason I haven't got this model yet. Also if they had included the funnel effect parts for both the backpack and dragoons like from full Burst mode Freedom then this model would have been truly complete
I honestly hate the MGEX line so far. I love the designs but the extreme points are just not worth the money for me. I wish Bandai would release the base kits minus the extreme points (led unit, gold plating) because the base kits of unicorn and the SF are just so incredible.
*inhale copium The price is okay when you compare it to resin kit & frame complexity Seriously, alot of MGEX kit is what MG should be, just cut the EX part completely For unicorn, just leave its LED & we have MG 2.0 unicorn For S.freedom, leave the coating & we have MG 2.0 S freedom
I wouldn't say its copium. The MGEX SF has a lot of features that gives it value. It's definitely a better choice than the PG SF that costs $100 more than this kit. Miniaturized PGU parts, check. Clear red pieces that I wish they'd put on a Build Burning someday, check. No display stand for funnels or wings? Sad panda.
I already got the MGEX ZGMF-X20A Strike Freedom Gundam. This one is for sure pricey at ¥14,000, but this pretty much is the MG 2.0 that fans have been wanting. Honestly, I think the price is worth it for what we're getting. I suppose if there's 1 thing Bandai could've done to make this a little bit more worth it is to include 'Wings of the Skies' effect parts. On a related note, I wonder if Bandai will be making an MGEX or MG 2.0 for the ZGMF-X19A ∞ Justice Gundam and ZGMF-X42S Destiny. I'd actually prefer an MG 2.0 for it along with an MG 2.0 for ZGMF-X56S/α Force Impulse Gundam, ZGMF-X56S/β Sword Impulse Gundam, ZGMF-X56S/γ Blast Impulse Gundam, and ZGMF-X23S Saviour Gundam. Speaking of which, I also if we're going to get an MG 2.0 or MGEX for the GN-001 Gundam Exia. It would be nice if we got an MG 2.0, but an MGEX would be fine too. There's plenty of P-Bandai releases Bandai could do for the numerous variants.
I'm very sad I couldn't get my hands on one of these. I've always been a fan of strike freedom. Then again I can't paint for shit so it would've been a little wasted in my hands. Very good video as always!
the ugly plastic gold is what turned me off from this kit, I prefer it's design and proportions over the Metal Build, has fantastic inner details but the plastic gold is just ugly, would've been fine if there were all hidden but a lot of it is sticking out and it's especially bad like on the joints where it's directly next to the plated gold, making the contrast worse. so far, I haven't found the "perfect" strike freedom for me, I like the gold plated inner frame of the Metal Built but I don't like the redesign and proportions that much, I like the design and proportions of the MGEX but I don't like the gold plastic.
Unfortunately, all the kits are based on the redesign rather than the anime version. The closest in terms of color will probably be the Soul Blue version of the Metal Build.
Build video still in the works BTW more review videos on the way.
I'm guessing you're going to mention which gold paints you used? I plan on using gaia notes star bright gold, aok, and odenkan.
I was avoiding all the MGEX SF videos, but I can't resist this surly bois salacious commentary!
😎 if only the rest of the gunpla community enjoyed my cartoonish voice.
That exit line "do great things" is just fantastic.
I'm glad It'sAGunpla still calls it like he sees it in his reviews.
i love your honesty ! and your work !
Thanks for the great and honest review of this kit.
I would actually like the next MGEX to be the GP01, and have the PG gimmick of both armors included and can be easily swapped out, maybe even include some manga only stuff like the long rifle or the chobham armor.
I’d settle for a GP01 2.0.
Wow, finally someone who had same thought as I do! I have a feeling since Bandai was NOT releasing ver 2.0 or ver Ka for MG GP-01 Ground type or FB (Rumour was that the 20 year anniversary ver ka was supposed to be GP-01... which ends up to be a Zeta Ver Ka which Bandai tries to make it look like old TV proportion?!), I felt maybe Bandai is not going to release an updated version of GP-01/FB on regular MG line but as an MG Ex convertible kit...
@@kennychan7104 The thing is that the MGEX so far are based on the more popular series. I imagine it's more likely to have a convertible 00 than a convertible GP01
Just started building mine and I can't lie about being a little disappointed at seeing only a few runners actually plated gold. The amount of detail, part separation and looks are out of this world but not worth more than 3 MG's. But I bought it because I'm a lover of the building part of the hobby so new complex kits like these get my blood pumpin'. I'll paint all of the armor and some of the mustard gold but honestly the plated looks fine to me. Kind of reminds me of the Hyaku Shiki in that it does not need to be as expensive as it is but Bandai will be Bandai when any amount of extra work goes into runner or 2.
The main reason for the cost is that there's still a lot of work that goes into making it. Do not forget that it's still superior to a lot of PGs that are put out and comparable to the PGU in terms of quality, just smaller. The only major points of weakness are the hip joints that connect the rail guns and where the two sections of the wings join together.
They definitely could have done better though. No stand for the funnels is the most disappointing part.
Absolutely! The engineering is bonkers on this thing. I hope they adopt some of these on a simpler scale for future MG's. I think of this line as a flagship base for them to make cooler stuff down the road. I can see this thing going on sale to
@@AstreaGT Unfortunately, I doubt the price will drop by much. The MSRP of the MGEX Strike Freedom is $180. Plus shipping is usually going to be $30+. I don't think it will drop below $220.
I also do not think the special coatings will be a normal thing. Just look at how few Clear Coats and Titanium Coats get produced. It's probably a logistical nightmare. Combine that with the higher price and it's far less accessible. Special coatings on even less premium stuff is already $100+
@@ohnosmoarlulcatz funnel & wing effect part is P-bandai later on
@@AstreaGT non coated version of this should be regular release
first time checking out your channel, this review was honest and realistic plus loved that you took into account the average builder. Earned an immediate sub!
Pretty on point review. I know most of the guys here are also builders with painting skills. To me as a straight builder, this thing is good enough to be on my collection. I'll admit that it broke the bank for me but as Seed fan, I couldn't let this one slip like the Titanium finishes for the MG Freedom 2.0, Justice, Providence, and Perfect Strike RM.
Yeah the gold in this kit is more than enough for me. So I’m in the minority with ya there
I'm a straight builder as well. I've done stickers some of my RGs (this takes almost as long as the actual build for me), but I've struggled like crazy with MG Waterslides due to my shaky left hand. What makes the MGEX Strike Freedom so good is that the color separation essentially makes it a prepainted model that requires almost nothing else added on to look good. Those clear red pieces are my favorite. The one thing that does disappoint me are those thin metal etched stickers that are exposed. I've already lost two of the smaller ones somewhere because they simply just fell right off.
I’m a straight builder too I try to panel line but some of the parts it’s tricky to do or it’s too small parts sometimes I go a bit ocd if I don’t have enough volume of ink on a certain spot but decals I’ve been starting to apply more especially the HG FA Gundam that was has a lot of correction stickers
@@Viper-jr4sp Honestly there is only few to panel line really. The part/color separation are good so some of them don't need to be panel lined. Also like that it doesn't require too much decals like going full VerKa style decal nightmare.
@@haisibanaag1563 the only good job i did was on the mk2 2.0 everything else is tedious
I feel like the Hyaku Shiki 2.0 had a better gold coating than the MGEX Freedom.
It is and I love mine.
I've got both an the 2.0 is amazing it's solid as a rock I honestly wasn't even going to buy the mgex but I thought I'd atleast try an got one of 6 that came in an it's an badass kit but price wise you get alot for the 2.0
Any of the pure gold kits like Hyaku Shiki and Unicorn Phenex will have a better gold coating that makes it shine. But, the point of the MGEX Strike Freedom is the color separation, which works out a lot better for its overall appearance. Granted, a Titanium Finish on the pieces that are the pure gold color would have made it a lot better
@@ohnosmoarlulcatz did you Iike the gold on the 1st hyaku shiki because I didn't but 2.0 was perfect in my opinion
@@coreymonday1375 I didn't. I prefer the Raise Cain version's gold.
Been watch your channel for a while always saying that ill buy a kit and build one in the future and while at Target I saw the they were selling some cheap kits, like $20ish, bought it. The process was confusing at first but eventually I understand. It's was such a relaxing experience and would definitely buy another one, but will never do the advanced stuff.
this is the only channel i have notifications on for, and it never disappoints
5:42 That hangar setup is insane!
Hellya another video.
Ya know, Im not in ay way familiar with ANY of these models but GAWD DAYUMM will I watch your videos just to get a glimpse of that hangar. 12/10. Will continue to watch these videos!
Yea if it wasn't for the fact I already did the fortune meow one, I'd would've gotten that one. Appreciate the review, it makes me feel good about my decision and holding back the FOMO effect lol
already broke mine cuz of the gold paint, but hey, i learned something from this video for my future! need to buy another!
I have a plastic strike freedom master grade but this version is awesome
I bought the mgex Unicorn back when it dropped and its still in the box. Not that I dont like it I just havent been that excited to build/paint it. I was not interested in the slightest for another SF with some fancy gold. I know they only dropped this because of the Seed 10th annivesary. Hopefully the next one will be more exciting
I mentioned this in Zakuaurelius' comments once. Completely agree, MGEX immediately peaked with it's "extreme points". The only other aspect that could be pushed to the extreme is "size". It's opens the door for insane 1/100 of fan favourite kits. Imagine a MGEX Kashatriya with the size being the selling point as an excuse to make it. Bandai would be printing money if they find a way to produce something like that.
@@user-sp9po5qi9q I really had hope that the mgex line would give bandai the opportunity to make kits that have long been wanted by fans, and that could have justified the price for something like Kashatriya even. I understand the Unicorn getting the treatement, the LED system is revolutaionary for them but I would like to see something completely new even for MG
While you may not be a fan, the MGEX Strike Freedom is actually quite an achievement in terms of engineering. The focus of the fancy gold and metal coatings actually undermines several major accomplishments that it has achieved. It creates a much better straight build that does not require any painting or panel lining. The most important thing is the miniaturization of the features of the PGU RX-78-2 frame assembly and the addition of preformed 1/100 hands that are comparable to older 1/60 PGs. If this ends up being the process that is used for future MG kits, they would have a lot less problems and have a lot more consistency.
But, the part that impressed me the most are the clear red pieces and I do hope they use the technique to produce the clear red pieces on the MGEX SF for a future clear kit. At a distance, it still looks like a solid version of that color. Up close, You can still see the insides. It's the best of both worlds.
@Kevin Li oh I won't argue that at all. The SF is definitely peak MG enginuity. Much like the RX-78-2 3.0 was back when it dropped. I would very much enjoy building MG's more often if this level of engineering and dedication were put into all MG's at some point. However that being said, I would much rather kits like this stay as the gold standard line of MG and not try and bleed it into regular release kits because that would increase the price of MG's even if they could cut cost down by continuing to find cheaper ways to do it. At that level MG's would be a minimum $100 or possibly stay the price the MGEX line already is. Iv also had 4 MG versions of the strike freedom over time along with several versions of the other lines, that's why I'm not really interested in buying another haha. Hopefully the next one is one I would like to build that's completely new to me
@@foreverfornever1124 I understand. I have the SF in MGEX, PG, RG, and HG. This is not counting the freedom in RG, HG, and MG. But, I'm a sucker for most SEED kits.
The main issue is that the PG, RG, and MG lines are already starting to bleed together with the size being the main difference.
I’ve been waiting for you to do this one the freedom is one of my favorites next to the justice and barbatos
Your video help improve on my printing gunpla and like how you go in detail on the model kit and printing info unlike most reviewers
I bought the original no grade 1/144 Strike Freedom a few months ago and hoping to paint and decal it with the MGEX as the basis. I love the look of this kit, but the price is a lot for me. Hopefully I can make a no grade statue look pretty good.
The no grade Strike Freedom is pretty rough. Everything from the pre-2010s is pretty rough nowadays. Even the newer $20 HGCE one is already a lot nicer. The RG one at $35 is pretty good too.
It's weird not seeing him dunk on people.
Beautiful work, papa!
That inner frame is sexy. I like it without the armor more😍
I thought outside of the B and D runner (plated gold) everything was injected molted; and did not need to be stripped.
What other runners/parts on the kit need to be stripped before painting?
Please let me know, thank you!
Also I plan on just dunking this and a mg hyaku shiki 2.0's gold parts in a tub of IPA -- never stripped gold before, and advice?
thankyou for the video, they are fun to watch and love all the sarcasm.
I have it preordered and it has a January shipping date but it looks like that’s not going to happen. I’ve had several chances to purchase it on Gundam Planet this week but I can’t cause then I would have two on order. A little annoyed because I paid upfront for the preorder and I can’t cancel it.
0:52 Glo Gang rise up
ah so it is that weird colored weak plastic that the MG Full Burst also suffers from :(
thank you for pointing that out cause that makes it a no for me, I broke parts wile building the full burst (first and only kit where that happened) and then just more and more joints ended up breaking...most of which I have no idea when or how it broke but upon taking the armor off yea a part that was once 1 piece is now 2 pieces >.>
and with the joints...i gotta say my MG sinanju's shoulder joint was impressive as hell that it didn't split, think I had 7-10 coats of paint on the arm peg and it still didn't split the part that it go's in to (I had it 1 hand holding up it's gun with the rocket launcher attached and extended on the gun... which it could actually do...better when on the ground as yea...massive imbalance :P but when I decided to give it a high gloss top coat I broke the peg on it's crotch that go's in to the torso ... i guess it may have been under a lot of stress from holding up the gun/rocker launcher combo for a year or 2 :P)
but I remember the full burst splitting the part on the arm that go's on the peg just by assembling it >.< never a great experience when basic assembly requires glue because the plastic is brittle as all hell (the creamy "gold" stuff), only kit I had to use glue on other then the High Rez Wing Zero Custom aka the hand grenade.
I broke a part on my psycho zaku & the HG areal gundam so I have been on edge. I also forgot to point out people breaking their waist joint for the MGEX, another thing I watched out for.
The wrist swivel is already tight without paint, with it it's almost impossible to move.
Great job and thanks for sharing the process
ah man i'm excited to see you do the new MGxSD Strike Freedom kit!
This is how you do a great, honest, human review 👏
Any insight as to how you did the gold paint? Was it just a metallic paint or did you do the chrome + transparent layers
Curious question 🤔 what was your first model kit you made?
It really looks a lot more spectacular without the armor.
Its been a while since 2.0 kit release, and MGEX SF is the 2.0 for old outdated SF
Any advice. I want to paint the mustard gold parts, but I want to use Spray Cans. What do you guys recommend.
This is beautiful
I love your work!
Simply beautiful
STRIKE freedom!
It bothers me, mostly because I prefer the freedom’s design to the strike freedom but to also acknowledge that I’m being nit picky I do know that the show doesn’t really make a difference between the two as Kira and all the characters just refer to the gundam as freedom…
But it’s still the strike freedom
WHERE DID YOU GET THAT BASE IS DAMN SICKKK
What paint/brand did you use for the inner frame?
Wooo!
I had a chance to buy it and passed.Wound up getting the iron blooded coating Barbatos, age-1 wear system set and the ew wing clear for about the same price.
Gundam reeeeeing out about paying $187 for the MGEX
Me: *cackles in Canadian*
oh man i didnt know you had a gunpla channel, sick
that darksydephil cameo lmao
I believe it’s a Ree stream, probably Tevin lol. Gotta do it for the main channel khantent do0d.
What gold paint did you end up using?
You were right, I did obtain mine in the summer. After getting scammed once…
What procedure do you use to strip the gold painted parts? I have this kit on Pre-Order
I’ve been debating on getting this kit but the price errr i don’t know if I can justify over here in Canada it goes from anywhere from 205-250$ CAD and if you include tax and shipping it’s close to 300 one place near me has it and in total it’s 235$ but is it worth it I can easily get 3-4 MGs for that price I love the Strike Freedom it’s one of my favs but I don’t know if I can blow through a huge chunk of my wallet on one kit which will eventually get released more often later on or do I go for other kits that I genuinely want right now I’m looking at getting the MG RX78 2.0 MG Sinanju Stein Ver ka and the Heavyarms
Freedom gundam being popular in china. Ironic.
What is that you are using to strip the gold?
What are you using to stirp your kits? I've tried several produces, but I have found anything that I like.
newtype.us/p/YFAmFbGbkhewD6G2K0VH/h/t-04-plastic-model-coating-remover-500ml
DO NOT get this on your skin it hurts like a mother bitch.
Yes definitely overpriced for the 4 something plated runners you get (which only 2 of them actually look good lol)
You think the original price is bad look at what other websites are selling it for Amazon is selling it for 250
@@nutbut312joe5 yeah you’re straight throwing away money at that point 💀
THERE'S A GUNDAM DOWN HERE!
I didn’t care for the SEED series, but they have some pretty banger kits.
Mr Gundam, do you have/watched Grendizer? It was huge in my childhood.
i have been so lucky, got 2 in italy for 70% of the original price
I'm saving my money for the Zeta Ver.Ka.
I've gotten this recently on my b'day on December and I was very happy I'm fine with how it looks, but the price is definitely expensive, my only problem is the moveable fingers and it's annoying, especially the etching stickers.
For me the ultimate MGEX kit should be a MGEX GP-03 Dendrobium or MGEX Queen Mansa to go along side my ZZ Ver Ka.
I'm really grateful you had the wherewithal to give this a fair shake, and not just coom over it like so many others.
Did it come with waterslides? I noticed you didn't stick any decals.
The kit still has a lot of achievements, but its greatest ones are covered up by the people who paint over them and end up missing the other color features brought by the kit like the clear red pieces. I really want to see a Build Burning using those clear pieces one day.
It has a few waterslides. The big one is the logo on the shoulder and there are a few more, but not that many due to the metallic and etched stickers being included too.
@Kevin Li thanks! Yeah I really love clear red plastic. Something about it reminds me of childhood.
I can confirm this kit costs the same in Vietnam when converted
I like the direction mgex is going except a few gold runners that should be painted and the inner frame should be made abs + pc. I miss the older mg models with solid inner frames. Articulation is great and details are spectacular.
i really wanna buy this but im poor and i fuked up with my MG used the wrong paint on the inner frame
There is 4 of these at my local shop, but I’m leaning toward getting the Banshee PG. The MGEX looks really cool though.
I would recommend the Perfectibility or the Final Battle Unicorns if you're going for PG. They're the same with extra stuff.
I want one of these so badly but they are absolutely unobtanium here in Europe, it will be years before I can find one and that's if I'm being optimistic
Watching DSP streams i see...
Idk how to paint so to me this kit is great
I can’t even get one. I’m on holidays in Japan and there’s no stock here at all
The Sky defender will give Bandai (MGEX) a run for their money.
I don't like the Sky Defender aesthetics, but I have a proder for the Infinite Dimension Genesis. Very excited for it.
I really want this just for the mini figures. I wonder if there is a market for bandai to do a line of mini figures of gundam waifu's to army build.
There's an MGSD version of Freedom already. But if you want real waifus, it's the SD Gundam World Heroes. The Qiongqi Strike Freedom is a beautiful mess of its own. There's also the line of MS Girls if you want actual waifus though.
Somewhat PG Strike is more appealing despite lack of gold parts
If you're talking about the PG Strike Freedom suggest you stay away from it. It's $100 more than the MGEX and worse. All you get is size and I would even argue that the RG Strike Freedom is already superior to it. The PG Perfect Strike is good though.
I got the pg gundam unleased instead of this. I feel like I dodged a bullet, however this would be a great item for my collection.
The MGEX Strike Freedom isn't as bad as the video makes it out to be. People were expecting a visual spectacle, but the most impressive things don't stand out as much. The kit's features aren't as visually impressive like the MGEX Unicorn's LED strip, but it is still a great kit. It's leagues above the old PG Strike Freedom that costs $100 more than the MGEX SF. While it isn't gold plated like a Phenex, it still does its job with its color and essentially comes pre-painted. The miniaturization of PG and PGU features like the posable fingers, the metallic and etched stickers, and the complete inner frame are very well done. I just wished the pieces that the railguns and the wings connect through were better. That is where the real weak spot of the kit lies. My favorite parts are the clear red pieces because they look solid from a distance, but you can see the details up close. I'm really hoping to see a clear kit in the future that uses this.
Build my first HG pale rider and I love it
I would want one of these but I put so much effort on my mg deluxe strike freedom gundam and I’m too damn lazy to work on this version but still want it though.
Honest review👍🏼👍🏼👍🏼👍🏼👍🏼
I FIND GP-01 AT BIG LOT CLOSE OUT FOR $ 3-4 ONLY
The MG in MGEX stands for Mustard Gold.
I saw those hands in the runners when the kit was getting spoiled. I just wish Bandai could start making better hands.
They did with the PG Strike Freedom and that was arguably the best part of the kit. The problem is that assembling those hands are a nightmare, which is why they reverted to pre-formed hands in all the other situations.
waiting for mgex astray red frame
Was gonna bit the bullet and overpay for this, but given how much cost saving Bandai did on this kit, I think I'll do my own cost saving too. The injected gold ruined it for me.
Wish I could afford these lol. for now I just play Mass builder and Gundam Breaker 3
It’s great friend 😊🧐✈️📦
Wanted, but being canadian, I save the 300+ for some else
It's already overpriced so imagine how much more overpriced it is when trying to buy this without a local retail store, it's the only reason I haven't got this model yet. Also if they had included the funnel effect parts for both the backpack and dragoons like from full Burst mode Freedom then this model would have been truly complete
I saw this, and I thought it was awesome. Then I saw the price tag... got the 2.0 instead
👍
I honestly hate the MGEX line so far. I love the designs but the extreme points are just not worth the money for me. I wish Bandai would release the base kits minus the extreme points (led unit, gold plating) because the base kits of unicorn and the SF are just so incredible.
*inhale copium
The price is okay when you compare it to resin kit & frame complexity
Seriously, alot of MGEX kit is what MG should be, just cut the EX part completely
For unicorn, just leave its LED & we have MG 2.0 unicorn
For S.freedom, leave the coating & we have MG 2.0 S freedom
I wouldn't say its copium. The MGEX SF has a lot of features that gives it value. It's definitely a better choice than the PG SF that costs $100 more than this kit. Miniaturized PGU parts, check. Clear red pieces that I wish they'd put on a Build Burning someday, check. No display stand for funnels or wings? Sad panda.
Remember when Bandai released MG kits (not as P Bandai)?
Me neither. God i would like more MG to be regular releases...
Nice work I hate the original MG Freedom after u paint it its like putty and don't even try to pose him more than once lol.
Strike Freedom :P
I already got the MGEX ZGMF-X20A Strike Freedom Gundam. This one is for sure pricey at ¥14,000, but this pretty much is the MG 2.0 that fans have been wanting. Honestly, I think the price is worth it for what we're getting. I suppose if there's 1 thing Bandai could've done to make this a little bit more worth it is to include 'Wings of the Skies' effect parts.
On a related note, I wonder if Bandai will be making an MGEX or MG 2.0 for the ZGMF-X19A ∞ Justice Gundam and ZGMF-X42S Destiny. I'd actually prefer an MG 2.0 for it along with an MG 2.0 for ZGMF-X56S/α Force Impulse Gundam, ZGMF-X56S/β Sword Impulse Gundam, ZGMF-X56S/γ Blast Impulse Gundam, and ZGMF-X23S Saviour Gundam.
Speaking of which, I also if we're going to get an MG 2.0 or MGEX for the GN-001 Gundam Exia. It would be nice if we got an MG 2.0, but an MGEX would be fine too. There's plenty of P-Bandai releases Bandai could do for the numerous variants.
@xxnike0629xx Will you build the kit/s inside the MGEX SF BOX/ES you have in your BOX fort?
@xxnike0629xx Will you build those 2.0s in your wishlists?
@xxnike0629xx or a NO to both of them? Because you are still too ...
@xxnike0629xx too
Charlie
Oscar
Whiskey
Alpha
Romeo
Delta
Lima
Yankee
to actually build a kit again LUL
I'm very sad I couldn't get my hands on one of these. I've always been a fan of strike freedom. Then again I can't paint for shit so it would've been a little wasted in my hands. Very good video as always!
Gundam Planet has been getting stock in. They announce on their Instagram the time and day stock will go live.
If anything, this would be perfect for you if you can't paint. The color separation and stickers gives it all the color you need.
“Strike”
the ugly plastic gold is what turned me off from this kit, I prefer it's design and proportions over the Metal Build, has fantastic inner details but the plastic gold is just ugly, would've been fine if there were all hidden but a lot of it is sticking out and it's especially bad like on the joints where it's directly next to the plated gold, making the contrast worse.
so far, I haven't found the "perfect" strike freedom for me, I like the gold plated inner frame of the Metal Built but I don't like the redesign and proportions that much, I like the design and proportions of the MGEX but I don't like the gold plastic.
Unfortunately, all the kits are based on the redesign rather than the anime version. The closest in terms of color will probably be the Soul Blue version of the Metal Build.