Abilene Machine Remanufactured - 466T John Deere Longblock
HTML-код
- Опубликовано: 20 авг 2024
- As with all of our remanufactured products, Abilene Machine takes great pride in our remanufactured longblock assemblies. To insure years of trouble-free operation, all components are thoroughly cleaned and inspected before assembly.
Blocks are align bored, the deck is resurfaced, and the sleeve counter bore is recut to guarantee they fall within OEM tolerances. Connecting rods are resized and the center-to-center dimension is corrected. Your longblock contains either a new or a reconditioned crankshaft (depending on availability) and is assembled using only the finest namebrand parts on the market today.
Our quality control program dictates that specifications, tolerances and cleanliness are checked and rechecked during final assembly. As a final precaution, all remanufactured longblocks are wrapped in plastic to prevent contamination. We're so confident of our remanufactured longblocks that we back them with a one of the best warranties in the business.
Our Longblock Assemblies Include:
•Fully Machined Cylinder Block
•Reconditioned or New Crankshaft
•Reconditioned Connecting Rods & New Rod Bolts
•New Pistons & Sleeves
•New Rod, Main & Cam Bearings
•Remanufactured Oil Pump
•Reground Camshaft & Lifters
•Reconditioned Cylinder Head
•Remanufactured Oil Cooler
•New Gaskets & Seals
Thank You for Watching and Have a Great Day.
Special Thanks to Elsa Rhae Productions®
I've spent money with you guys before. Its been all good every time.
Thank you everyone for the comments and likes! First, want to say that this video was highly edited for time purposes and not all the rebuilding is captured here. Nonetheless I hope you enjoyed the video and have a good day!
A bit of nostalgia here. I worked in the plant where that engine was made. Of course is goes together a bit differently there.
Waterloo Works?
Yes, Waterloo Engine Works.
@@gonerydin4225 বাংলা ভিডিয় দেন
Best video sharing sir ,greetings know me from malaysia 👍👍🙏🙏🙏
Great job even though it is speeded up. Nice to watch a master engine builder at work.
How can the guy adjust the valves on all cylinders without rotating the engine ?
michaelovitch John Deere valve timing sequence can be set with 2 revolutions of the engine when using the manual.
dudekiwi
ok
but here it doesn't even move.
exact, excellent observation, also the sequence of tightening the head bolts is wrong
michaelovitch y how kju h! &ii
michaelovitch
Great video . I'm about ready to do a major overhaul on my 3010 gas. I'm in the process of modifying one of my engine stands to support this thing. Two uprights and heads on both sides. Now I know about how far up the block the pivot points need to be for this thing to balance right on the mount rails.
مرحبا
This is marvelous, I would like to be full time member of the car career building with all the tools necessary also distance studies as already a mechanic working in the government of Zambia.
Great vid !
Would have been nice to spray the block with John Deere colors. - To match all the fantastic work done here.
Very good job sir 👍👍
does anyone else notice him not measuring a few of the valves @8:29-8:58 ?
The video is highly edited due to the length of the original video. As a consequence parts of the video will be missing.
Abilene Machine, Inc. Song name? Nice job by the way!
MrAganger b
także panowie przed żniwami bieżemy się za Andorię:)
A couple things the timing of the cam normally the key way is up or down for TDC ? I see you didn't have the flywheel on to help with your timing . Gee I enjoyed that vid bought back good memories spend 34 yrs servicing Green
dudekiwi the camshaft is timed to the crankshaft using two marks on either gear on the front of the engine, when they are lined up.
Sgdurdhtshe
So beautiful fx
I love this
Nice one sir
تحياتي يافنان من مصر ام الدنيا
Great video
Excellent
6 cylinder piston super worker
570
@@sohalsohal4131 yyn.8
Checking liner protrusion with one bolt holding liner down?
Good luck bro l like
30 45 60 90.
فيديو رائع وممتاز
Great video🎥 God bless you brother
Super.
धन्यवाद
nice asemble biro
When tightening the head, I follow the repair manual bolt tightening sequence. Every one I have ever seen starts from the center and works out. Perhaps its another sequence with John Deere.
On the assembly line they are all torqued simulataneously. So are the main caps.
fenx1200 9
You don't start at the center and work out on that engine. You start at the left rear and go around the perimeter, and then come back to the center and do the inner bolts. So, for this engine - your assumptions are wrong.
fenx1200 .
fenx1200 mm
Please engine fiaring and timing mark setting thank you sir 🇧🇩🤝
.
@@jessarabago8121 📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
@@jessarabago8121 boink
@@jessarabago8121 nostalgic
🍸🌹🌹🍸🌹🌹🍸
🌹🌹🌹🌹🌹🌹🌹
🌹🌹🌹🌹🌹🌹🌹
🍸🌹🌹🌹🌹🌹🍸
🍸🍸🌹🌹🌹🍸🍸
🍸🍸🍸🌹🍸🍸🍸
🍸🍸🍸🌹🍸🍸🍸
🍸🎁😊❤☺🎁🍸
☁🎈🎈☁🎈🎈☁
🎈🎈🎈🎈🎈🎈🎈
🎈🎈🎈🎈🎈🎈🎈
☁🎈🎈🎈🎈🎈☁
☁☁🎈🎈🎈☁☁
☁☁☁🎈☁☁☁
✨💎💎✨💎💎✨
💎💎💎💎💎💎💎
💎💎💎💎💎💎💎
✨💎💎💎💎💎✨
✨✨💎💎💎✨✨
✨✨✨💎✨✨✨
☁😘😘☁😘😘☁
😘😘😘😘😘😘😘
😘😘😘😘😘😘😘
☁😘😘😘😘😘☁
☁☁😘😘😘☁☁
☁☁☁😘☁☁☁
☁😘😘☁😘😘☁
😘😘😘😘😘😘😘
😘😘😘😘😘😘😘
☁😘😘😘😘😘☁
☁☁😘😘😘☁☁
☁☁☁😘☁☁☁
☁☁🎈🎈☁☁☁☁
😊😊👀😊🌛☁☁☁
😊😊😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁🎈
☁☁😊😊😊😊😊😊
☁☁😊😊😊😊😊😊
☁☁😊☁😊☁😊😊
🌾🌾😊🌾😊🌾😊😊
☁☁🎈🎈☁☁☁☁
😊😊👀😊🌛☁☁☁
😊😊😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁🎈
☁☁😊😊😊😊😊😊
☁☁😊😊😊😊😊😊
☁☁😊☁😊☁😊😊
🌾🌾😊🌾😊🌾😊😊
✨🌾 🌾 🌾
😏😏😏😏😏
😏😏😏😏😏😏😏
😏🕓🕓😏🕓🕓😏
😏🕓🎱😏🕓🎱😏
😏😏😏😏😏😏😏
😏😏😏✔😏😏😏
🌀😏😏😏😏😏🌀
😏🌀😏😏😏🌀😏👍
👉🌀🌀🌀🌀🌀🌀
🌀🌀🕐🌀🌀🌀🌀
🌀🌀🕐🕐🕐🌀🌀
🌀🌀🌀🌀🌀🌀🌀
🌀🌀🌀🌀🌀
👟 👟
✨🌾 🌾 🌾
😏😏😏😏😏
😏😏😏😏😏😏😏
😏🕓🕓😏🕓🕓😏
😏🕓🎱😏🕓🎱😏
😏😏😏😏😏😏😏
😏😏😏✔😏😏😏
🌀😏😏😏😏😏🌀
😏🌀😏😏😏🌀😏👍
👉🌀🌀🌀🌀🌀🌀
🌀🌀🕐🌀🌀🌀🌀
🌀🌀🕐🕐🕐🌀🌀
🌀🌀🌀🌀🌀🌀🌀
🌀🌀🌀🌀🌀
👟 👟
🎈 Happy Birthday!
🔥 🔥 🔥
📍 📍 📍
📍 📍 📍
🎂🎂🎂🎂🎂🎂🎂🎂
🎂🍓🎂🍓🎂🍓🎂🍓
🍓🎂🍓🎂🍓🎂🍓🎂
🎂🎂🎂🎂🎂🎂🎂🎂
🎂🎂🎂🎂🎂🎂🎂🎂
I Love Sea!
☀☀☀☀☀☀☀☀
🌴👙🐚🚣⛵🌊🚤🏄
🌊🐳🐟🐙🐬🐠🐬🐋
very good
What reason to apply scotch at end of assembling?
Vvv nice
ماشاء الله ربنا يديك العافية
why do you put on and take off the bearing caps
What is a red preparation added to lubricating ????????????????/
Heniek 977 assembly lube google it
👍👍👍👍
very very goood
Was it just the way I was taught or something but I was taught not to use impacts when tightening bolts that go to the piston and crankshaft. Was I taught wrong?
no you are very much right bro..it should not be torqued by gun.....very easy to Crack...
Thank you.
You can use ordinary impact gun but you need to limit torque (if possible) simply as a way to speed up the work, just to loosely tighten the bolt and then you must use manual torque ratched to tighten bolts to desired value,. Profesional impact guns can be set and calibrated to desired torque, that kind of tools is for example used on production lines. If you look closely, in this video he is doing just that. YOu can do it with ordinary cheap impact too, just reduce presure and impact will have low power, enough to screw the bolt in but not to tighten it.
Jason Eads I use mine with the power set to minimum. I run the bolt down until it just kisses the head. Then step torque in sequence until final torque is reached.
Jason Eads оьто
ستمروبهاذا العمل
ليش العرب ما عدهم هيج صناعات
👍👍
Vary good tata
No sir we need a slow video
Yeah is a little too fast
Vary good
Nice
જય જય ગરવી ગુજરાત
أريد اعرف من احسن محرك برنيوم 340 .2. كلاص .6. كلاص
super
Oh.good job I too like to work on that kind of line .if any vacancy pliz contact us
what is the torque of the crankshaft
Charly Rocha อิเสะะะถคต'''!@@'
150 ft. Lbs.
Muy bonito él trabajo q hacen
Na koji zazor se steluju ventili na motoru 6466
good luck
What happened to torque sequences.
or cross hatch honing
Gary Mc Donagh hola tengo un huni 500 pasa agua a un inyertor como puedo checa como quutarla
Palimino Soto
My name is Philip Obonnaya I'm an engineer industrial engineering I want to acquire more wisdom how can I use and join the group please
Good
hmm sure thats not a 6081?
Eric Price definitely a 466. The cam driven oil pump is specific to the 400 series 466, 404. Plus the 6081 (450 series) block is a bit different look that.
alguem sabe onde arrumo uma cinta de aneis dessa?
When installing AR55394 engine oil cooler, does the (2) R51053 tubes have too be installed at the same time ? Reason for asking is that I need to replace both of R51053 tubes on my JD7720 Combine. Can I install the tubes without removing R51283 cover ?
nice warking
Mahesh Gujarat se bol raha apna fast video banate hain ki meri samajh mein nahin
Como tu concegue trabalhar tão rapido?
Joao Onivaldo De elo
nise
Peace be upon you, Professor. I have a question on the car. My generation Ck. I have bubbles appearing with it in the radiator. I replaced the cassette 3 times. The machine is clear and smooth. Strong pulling from the cooling off. Returns the text. Normal. Professor The driver did not switch.
j'aimerai être mecanicien poid loud camion
3.00 -3.04 mua ở đâu
Postoji li drugi kanal
No
👁💯🤙
How to cook a hamburger at 11
ऐ कौनसा गाडी का है,
nie ustawił wszystkich zaworów
I know she ain't half the time in my chair song
تمام
مذهل
Да что это за ремонт трёх метровой трубы даже нет.
Rahul Makrani
does anyone know Hp for a John Deere 6- 466T thanks
around 180 HP
You can push 200 out of them. After that you risk twisting a crank.
منورين
منورين شنو ههههههههههههه
мастер 👍👏
Ok
slow motion me
Hi
1
Cool
Wiring menual data videos
Seraj
Yeah, no . . . a few corners have been cut during assembly, anyone with a decent engine building background can spot it. Nice to watch but not the best of techniques and procedures.
JIGA BACHI what would u do differently?
Give me BS 4 trainte
montador.de.motor.
Tata commins piston roping
faijul
hmmm
700
هاي مال أقجم
Adam and Eve Islam
It
Nissan x trail
খক