Hello, this is the best magnetizer I have used and I think it surpasses all the others... it adapts and the magnet it comes with is extraordinary... Best regards from Santiago de Chile...
MAKITA!!! Maybe I'm old fashioned but i still swear by the standard magnetic drivers. The sleeved for 3+" screws. I ALWAYS love your accessories vids regardless, though. Thanks, Vince and God bless! 😁👍✌
Not gonna lie. Ryobi tools have served me very well as home diy-er, but I 100% agree that their driver bits need some improvement. When I was a budding diy-er I bought that same bit kit because of brand loyalty (which is pointless for anything other than battery convenience) and the bits slipped and stripped very quickly. Good to know about the mag booster, though! Keep up the great videos!
Another Great One Vince! I haven't found a bit that the Mag Boost will not work on. One of my Fave accessories for sure! I frankly challenge anyone out there to give me good reasoning why the Makita Mag Boost shouldn't be in every persons toolbox! I've tried all the magnetic bit options out there and The Mag Boost is the Best imo! Your doing a real service highlighting the product for the VCG viewers! As my ramble might suggest I think the Mag Boost is an Awesome Product!
Alexis Valdez I feel the same bro. It’s either 99% of people don’t know or 1% know... titles are annoying, but I think I remember hearing that RUclips emailed their creators and asked them to make their titles clickbait titles.
Hey VCG, I actually have almost all them. Driver bit sets except for the Ryobi one. The makita magnet will actually fit over other brand bits and hold the screw, it doesn't fit perfectly but I've used it with my dewalt, Bosch, Milwaukee etc and they held the screws good enough on the 2 inch bits so they didn't fall off when getting ready to drive them . The little yellow dewalt magnet works also . 👌
I need to pick up one of them larger makita bit kits with the mag boost and pick up some Bosch bit kits as well give them a try and do some video content on all the kits
5:35. I definitely agree I work fo a solid waste company as the maintenance guy and me boss is always wanting me to make signs for customers to know what to do but people are lazy when it comes to reading signs it’s ridiculous.
A possible tight space and long reach adaptation for auto mechanics, machinists, electricians, and machinery repairmen the mag boost extreme may be the perfect slip on accessory for holding Phillips and Torx head machine screws on manual screwdrivers as most of the screw holding screwdrivers I've seen are only for the slot head screws and they are far from perfect. What do you think? Congratulations on 102K subs Vince.
I had 3 ryobi bits snap on my makita..it was a cheap kit...probably going to use dewalt...I want to use makita but I'm weird and dont like the gold bits
Agree with you, Nick. The gold is off putting for some weird reason for me as well. My fav bits are still the dewalt max fit bits. Use them with the Milwaukee, dewalt and makita. Last a very long time. I will say for hex bits I’m liking the Milwaukee brand more and their torx are improving also. All that aside, I have a grandson who is learning the tools and is hard on bits. I got him a makita gold set that was on sale last Christmas and he is yet to tear one up.
Bob dewalt makes a spotlight with 3 leds and ryobi makes one with 7 lol. I leitterally bought it just to screw around but the thing is actually good +desalt drills blow up.
Bob i was simply answering the question you asked about where to go to see burned out dewalts. theyve burned out quite a few on this channel. wasnt curious whatsoever about what happens in your office, not sure why you answered a question that nobody asked. thats great you keep track of your tools though?
Have you ever wondered why I have to buy 20 bits. And why you need a 100 piece bit set? Because they know they are going to break. I am a Milwaukee guy but there bits suck. I'm a electrician and maybe our screws are different. Its mainly the panhead self tappers the bit itself doesn't fit the head of the screw it wabbles so much it can't get started I would have never placed the problem if it weren't for someone used my impact and he had the same problem. So it sucks to put a dewalt bit into my Milwaukee.
Get the new dewalt 50x impact bits in the black and clear case, and get the makita magnet end, it actually fits perfectly. And like the video shows it holds screws strong.
This video is a year old now so hopefully you have figured out the 2 mistakes I noticed were made. 1. The Mag Boost and other slip on magnets like it are not designed to be used on 1” bits also known as Driver Bits!!! Driver Bits are only designed to go into both mag and non mag bit holders. The magnate from the bit holder is strong enough to make the 1” inch bit magnetized and able to hold the bit. 2. The bits that are longer than 1 Inch are what makita calls Power Bits!!! So all of the bits with extended shafts are designed to be used with slip on magnets like the mag boost. This way the bits can be whatever length you want and it doesn’t matter bc the slip on magnets will still be at the end of the bit. Also Power Bits are not designed to go into bit holders. They can damage your equipment if you try to use them that way bc it messed up the shaft flexing on impact bits and drills. They are designed to act as their own extension which is why they come in multiple lengths as well.
Mu-skeeter!..🏁.... 4:58.. Correct.... 11:50.. or Makita beat DeWalt to Market with their Mag Boost ...maybe that's why the old ones aren't in the ( Max Fit) kits... because they're getting ready to bring out there upgraded version and Makita beat him to it... just a thought
I stick with makita ..and I'm glad I dont have to feel bad about it
The 3 most important tings in life according to Vince: Life, liberty and the pursuit of magnetic driver bits. Happy 'Murica day everyone.
Hello, this is the best magnetizer I have used and I think it surpasses all the others... it adapts and the magnet it comes with is extraordinary... Best regards from Santiago de Chile...
Absolutely agree having the bits magnetized is a must most of the time.
MAKITA!!! Maybe I'm old fashioned but i still swear by the standard magnetic drivers. The sleeved for 3+" screws. I ALWAYS love your accessories vids regardless, though. Thanks, Vince and God bless! 😁👍✌
Not gonna lie. Ryobi tools have served me very well as home diy-er, but I 100% agree that their driver bits need some improvement. When I was a budding diy-er I bought that same bit kit because of brand loyalty (which is pointless for anything other than battery convenience) and the bits slipped and stripped very quickly. Good to know about the mag booster, though! Keep up the great videos!
Great video Vince, always good advice & every video i learn something. You should be a tool distributor!
Thanks Maxkil we appreciate it!
I have 2 of them, they work awesome! Makita can't make everyone else's tools work.
Great video Vince! I hope your family has a great 4th!
The same to all of the Coptool family!
Another Great One Vince! I haven't found a bit that the Mag Boost will not work on. One of my Fave accessories for sure! I frankly challenge anyone out there to give me good reasoning why the Makita Mag Boost shouldn't be in every persons toolbox! I've tried all the magnetic bit options out there and The Mag Boost is the Best imo! Your doing a real service highlighting the product for the VCG viewers! As my ramble might suggest I think the Mag Boost is an Awesome Product!
Video great ........ I hope to bring some of the products of Hilti and make video about it ... I watch you from Iraq
I love the videos but damn Vince does every title and thumbnail have to be clickbait? Lol
Alexis Valdez I feel the same bro. It’s either 99% of people don’t know or 1% know... titles are annoying, but I think I remember hearing that RUclips emailed their creators and asked them to make their titles clickbait titles.
Hey VCG, I actually have almost all them. Driver bit sets except for the Ryobi one. The makita magnet will actually fit over other brand bits and hold the screw, it doesn't fit perfectly but I've used it with my dewalt, Bosch, Milwaukee etc and they held the screws good enough on the 2 inch bits so they didn't fall off when getting ready to drive them . The little yellow dewalt magnet works also . 👌
I need to pick up one of them larger makita bit kits with the mag boost and pick up some Bosch bit kits as well give them a try and do some video content on all the kits
I have alot of ryobi bits and drill bits they have never let me down but I agree there are better bits and brands out there
Same here, Ryobi gets dumped on but they've worked for me just fine.
Milwaukee Matrix was the best invention ever. After seeing them cracking, it made me go and buy a Wiha kit.
Vince , can you zoom in your product demo pls.
Vince, you should try the new klien power bits they are the bomb!
I love makita! Thx for this test video
thank you for everything you do!good lesson for us.
thanks from Romania
5:35. I definitely agree I work fo a solid waste company as the maintenance guy and me boss is always wanting me to make signs for customers to know what to do but people are lazy when it comes to reading signs it’s ridiculous.
Great job at all these tool display videos sir! Helps to see whats out there before I make a purchase. Keep it up VCG Crew
Makita has the mag boost in larger kits now
Great demonstrations Vince
i like the 2 inch dewalt bits
A possible tight space and long reach adaptation for auto mechanics, machinists, electricians, and machinery repairmen the mag boost extreme may be the perfect slip on accessory for holding Phillips and Torx head machine screws on manual screwdrivers as most of the screw holding screwdrivers I've seen are only for the slot head screws and they are far from perfect. What do you think? Congratulations on 102K subs Vince.
Thanks Greg we appreciate it!
I’m definitely a 1 percenter🇺🇸
Hey Vince if you run the outside of the mag boost it demagatise the screwdriver or bit tips
I need to do a video with all the driver bit kits I have and what ones I like the most
Congrats on the 100k subscribers cuz!!!!!!!!!!!!
Thanks Time!
I had 3 ryobi bits snap on my makita..it was a cheap kit...probably going to use dewalt...I want to use makita but I'm weird and dont like the gold bits
Agree with you, Nick. The gold is off putting for some weird reason for me as well. My fav bits are still the dewalt max fit bits. Use them with the Milwaukee, dewalt and makita. Last a very long time. I will say for hex bits I’m liking the Milwaukee brand more and their torx are improving also. All that aside, I have a grandson who is learning the tools and is hard on bits. I got him a makita gold set that was on sale last Christmas and he is yet to tear one up.
It's a tool, not a hand bag or high heels.
Also congrats on the 100k
Thanks Matty!!
Good video!! Happy 4th
Is Vince even a carpenter. I think he is more of a youtuber than somebody in the biz.
Big Milwaukee fan, but dewalt has one made for the short driver bits which are more common. Only found 1 kit with it.
Happy 4th Vince!
The ryobi drills eh. But the work light range is better than anything else
Bob dewalt makes a spotlight with 3 leds and ryobi makes one with 7 lol. I leitterally bought it just to screw around but the thing is actually good +desalt drills blow up.
Bob if you watch this channel more you will see plenty of blown dewalts. its almost a running gag how often they blow.
Bob i was simply answering the question you asked about where to go to see burned out dewalts. theyve burned out quite a few on this channel. wasnt curious whatsoever about what happens in your office, not sure why you answered a question that nobody asked. thats great you keep track of your tools though?
Bob ok let’s stop bickering like babies
Bob I was just asking Vince if he would look at some ryobi as there are some tools that are impressive
I like my Irwin 20 piece set with magnetizer
Have you ever wondered why I have to buy 20 bits. And why you need a 100 piece bit set? Because they know they are going to break. I am a Milwaukee guy but there bits suck. I'm a electrician and maybe our screws are different. Its mainly the panhead self tappers the bit itself doesn't fit the head of the screw it wabbles so much it can't get started I would have never placed the problem if it weren't for someone used my impact and he had the same problem. So it sucks to put a dewalt bit into my Milwaukee.
Sweet makita video Vince
You stay free Vince! HAPPY 4TH. FREEDOM DAY!!!
I will say this: happy bald eagle day from your northern neighbours
Your using the old ryobi bits. Try the new 70 piece set. Also all the new ones are magnetized so yeah and 15 bucks.
@VCG Construction you got this idea from me after telling you about this. Lol
I believe you’re correct Brady!!
All the boost!! 🙌
Why would you need the magnet to engage the bit?
I have both milwaukee kits and ryobi kits and my Milwaukee always brakes and I haven't ever broke a ryobi impact bit yet
Why don’t the drills and impact guns just have magnetic built into the tool so everything you put in it is magnetized ? That idea is copyrighted btw😜
Get the new dewalt 50x impact bits in the black and clear case, and get the makita magnet end, it actually fits perfectly. And like the video shows it holds screws strong.
Jason Levesque ya thanks.... I did just watch the video.
Hey also use the magnetic bit holder and then place the makita magnet over a 2in or larger driver bit and you'll get a nice hold.
Ultra magnetic like v.c.g channel.
Happy 4 Th to all my blue collars👍🏽
Waiting for the Milwaukee one 🙄
Ain’t seen one 🤦🏽♂️
This video is a year old now so hopefully you have figured out the 2 mistakes I noticed were made.
1. The Mag Boost and other slip on magnets like it are not designed to be used on 1” bits also known as Driver Bits!!! Driver Bits are only designed to go into both mag and non mag bit holders. The magnate from the bit holder is strong enough to make the 1” inch bit magnetized and able to hold the bit.
2. The bits that are longer than 1 Inch are what makita calls Power Bits!!! So all of the bits with extended shafts are designed to be used with slip on magnets like the mag boost. This way the bits can be whatever length you want and it doesn’t matter bc the slip on magnets will still be at the end of the bit. Also Power Bits are not designed to go into bit holders. They can damage your equipment if you try to use them that way bc it messed up the shaft flexing on impact bits and drills. They are designed to act as their own extension which is why they come in multiple lengths as well.
What’s the model number
What is quit frankly means
Didn't Milwaukee day they were going to come out with a magnetic adapter
Yes
Hi vince
The bits really bothered you. What can go wrong for $11.95 ca
Mu-skeeter!..🏁....
4:58.. Correct....
11:50.. or Makita beat DeWalt to Market with their Mag Boost ...maybe that's why the old ones aren't in the ( Max Fit) kits... because they're getting ready to bring out there upgraded version and Makita beat him to it... just a thought
Nobody loves Ryobi Vince
17 times more magnetic, not 7 Vince lol