This video is out of date! The App GUI no longer looks or functions as described here. Get with it JBL and update your tutorial to reflect how the current EON Connect functions.
I did firmware update in my EON615 and since then the bluetooth sync light doesn´t keep on and the speaker don´t sync to the app anymore. What can I do?!
can someone tell me if i can tune 2 speakers at the same time it seems to be alot better to be able to do that why would i tune one speaker when ill be using 2
Can't believe how many people didn't actually see what the bluetooth is for before complaining that it doesn't do all the things it was never designed to do.
What JBL doesn't tell you: Once an EON speaker pairs up with a specific bluetooth controller, it will REFUSE to pair up with ANY other device. If you no longer have access to that particular cellphone or tablet, or if the EON speaker goes permanently "offline" for whatever reason, your only recourse is to reset the speaker back to factory defaults. That will delete all custom presents you may have stored in the speaker, such as the work you put into EQing it. But by that point, you've already purchased the speaker, and the app has served JBL's intended marketing purposes.
I bought 2 610s last fall how come none of this info came with the damn speakers? I love the speakers but what a clusterf%#£ with the Bluetooth function
Possiedo da 3 anni due eon 612 buone casse ma purtroppo non parlando inglese non riesco ad utilizzare la app. Peccato che un marchio così prestigioso non diffonda video o documentazione scritta in italiano di come installare ed utlizzare l'applicazione.
I can verify that they *can* connect to an iPhone with mine. If you are following the procedure correctly, maybe the speaker has an issue. Try a different phone or tablet?
brett mashado apparently.... remember, the 600 series was backordered for 8 months! the software has been 'coming soon' for over a year. I love JBL, but I'm not holding my breath for the 'June 30th' date.
Luigi Seta ummm, do not run this with a powered mixer. You will run the risk of blowing it. It has a 1000 watt amp built in, all you would need is a regular line level mixer
@@ulisesromero9016 chicos lo que deben hacer es mantener oprimidos los botones boot y EQ mientras la encienden (diria yo 4 seg), luego esperan un momento que ella se reinicie (van a parpadear los botones) min: 1:07 y 1:08 del video y van a la aplicación EON 600 el les va a recononcer su cabina.
i get to the part where it says click ok to firmware update and thats it , can these speakers be used via the bluetooth app or not does anyone out there no ? or is there more to it than that ?
They make it hard to get started. JBL will make so much money if only they did the simple things - add user manual and what's needed instead of selling a high tech stuff in a box with no instructions
hilarious. "Bluetooth" capability with these speakers is nothing more than remote control of some of the speakers' functionality. Good thing I'm not a DJ who bought a pair and thought he could broadcast music through them via bluetooth. Hilarious.
Andy Ziemann just run a auxiliary input into the speaker or a mixer. It doesn’t have Bluetooth because it’s meant for a professional use, which you would likely use a six cord in
This video is out of date! The App GUI no longer looks or functions as described here. Get with it JBL and update your tutorial to reflect how the current EON Connect functions.
Why after i connect it to the bluetooth why cant i hear the music on the speaker ?
Its app driven no streaming
@@BigPoppa-t3z SMH that is Correct had i known that i would have never purchased it...
RenStarFilm XDDD
I agree, I can't play music thru it!!!! The Bluetooth is ONLY for EQ, etc....can this be updated??
F...k why at this time do it the bluetooth connection complicates
So wait, you don't play music from your phone directly to the speakers?
Nope, not from the installed Bluetooth.
Gotcha’
@@MERT454 is there anyway to listen music from phone via bluetooth in speakers?
@@sebastianbardon6502 No my friend, it is not that type of Bluetooth.
I did firmware update in my EON615 and since then the bluetooth sync light doesn´t keep on and the speaker don´t sync to the app anymore. What can I do?!
can someone tell me if i can tune 2 speakers at the same time it seems to be alot better to be able to do that why would i tune one speaker when ill be using 2
Can't believe how many people didn't actually see what the bluetooth is for before complaining that it doesn't do all the things it was never designed to do.
I have a question i cant conect to Bluetooth it aka me for a vida?
Great tutorial. Easy to understand. Worked great ty
Can EON Connect control BOTH Eon 600 and 700 devices?
What JBL doesn't tell you: Once an EON speaker pairs up with a specific bluetooth controller, it will REFUSE to pair up with ANY other device. If you no longer have access to that particular cellphone or tablet, or if the EON speaker goes permanently "offline" for whatever reason, your only recourse is to reset the speaker back to factory defaults. That will delete all custom presents you may have stored in the speaker, such as the work you put into EQing it. But by that point, you've already purchased the speaker, and the app has served JBL's intended marketing purposes.
Does the app not exist anymore? I can't find it on Android.
Me pide un código para poder conectarme. Porque lo hacen tan complicado Jbl.
Un pin de 4 digitos , pero no desifro cual es
Is it really possible that they did not include a simple power on/off option via the app?? That’s the only thing I need it for!
Can't find the download link guys? Is it online yet? Cheers, James
can i listen music from the phone to the speaker with this app?
Please get in touch with our support team here so we can help: jblpro.com/support/tech_support?geo=us
Thanks! We appreciate your support.
I bought 2 610s last fall how come none of this info came with the damn speakers? I love the speakers but what a clusterf%#£ with the Bluetooth function
Possiedo da 3 anni due eon 612 buone casse ma purtroppo non parlando inglese non riesco ad utilizzare la app. Peccato che un marchio così prestigioso non diffonda video o documentazione scritta in italiano di come installare ed utlizzare l'applicazione.
Is normal hot fast the back eon 615 ? In less than 6 min is hot the back eon area outlet ? I hace it just yesterday and i realized that today
Even I can't connect it to my iphone. Its been three months since i brought this speaker.
I can verify that they *can* connect to an iPhone with mine. If you are following the procedure correctly, maybe the speaker has an issue. Try a different phone or tablet?
Steve Young can you play music through the bluetooth. I was able to connect it to the iphone but i cant get it to play music through it
Me too cannot play music through bluetooth
iOS version guys? Anyone know a rough release date? Pleaseeeeeee
James Jefford www.jblpro.com/www/products/portable-market/eon600-series#.VVISTPmqpBc Apparently June 30
brett mashado apparently.... remember, the 600 series was backordered for 8 months! the software has been 'coming soon' for over a year.
I love JBL, but I'm not holding my breath for the 'June 30th' date.
Can you add delay effect?
Ok when I disconnect the blue tooth I can't get the volume very loud but when I connect the blue tooth I can crank it. WTF ?????
anyone know the pairing code?
No
There's no code
Bluetooth Verbindung mit meinem Samsung S10 nicht möglich!
What is needed to run this speaker? A receiver and a mixer? I apologize for my lack of knowledge. Any feedback would be helpful. Thanks in advance.
Can run alone, without anything, directly connected to a source (i.e. laptop). But for full power you will need a powered mixer.
Luigi Seta ummm, do not run this with a powered mixer. You will run the risk of blowing it. It has a 1000 watt amp built in, all you would need is a regular line level mixer
An email would have been sent for download. App is available in playstore.
How do I pair my 612 to my iPhone ?? Can someone please help me
Press boot and eq buttons while powering on until all lights stop blinking it will recognize your speakers
iOS version?
et le p.i.n. ou on le trouve?
hola amigos si pudieran hacer un vídeo explicando esto en español ya que yo compré unas bocinas de esta y no puedo configurar el blutooth
Por favor un Totoral en español latino xq yo tampoco puedo usar la app. Gracias
@@ulisesromero9016 chicos lo que deben hacer es mantener oprimidos los botones boot y EQ mientras la encienden (diria yo 4 seg), luego esperan un momento que ella se reinicie (van a parpadear los botones) min: 1:07 y 1:08 del video y van a la aplicación EON 600 el les va a recononcer su cabina.
@@elgranramirez901 no se puede transmitir audio del telefono al bafle verdad? solo es para configurar lo ajustes del ecualizador segun parece.
@@omarbautistacruz si hermano es solo para configurar el bafle.
Si presionas el boost y el eq button a la misma vez haste que todas Las lunes se apagen si trabaja
how do i figure out my fucken pin for bluetooth
I think you have the same problem as I know what the password for bluetooth ?
ALIAS IZZ hey how you found the pin?
do you found the pin?
When is the iOS gonna be released??! Can't wait!
It didn't turn on
Very good. Thanks.
i get to the part where it says click ok to firmware update and thats it , can these speakers be used via the bluetooth app or not does anyone out there no ? or is there more to it than that ?
Daza Mac I just got these lol did you figure this out
Kevin Velasquez did you figure it out? I just got one today.
Thank you
without being able to play music thru the bluetooth this is a fucking joke. any solutions out there?
B. Damon did you figure out the issue to this lol
B. Damon yeah return speaker
They make it hard to get started. JBL will make so much money if only they did the simple things - add user manual and what's needed instead of selling a high tech stuff in a box with no instructions
Hi William,
Please send us an email to HProTechSupportUSA@harman.com so one of our product specialists can help with your setup. Thanks!
This instruction video is helpful and nicely done.
The background music is unnecessary and distracting. Would be great if it could be eliminated.
Doesn't work, the speakers wont connect to bluetooth. All it does is ask for a password that doesn't work.
Por favor tambien la explicacion en español, gracias
Lograste conectar amigo
Yo si,pero no entiendo cómo podría poner música
can someone tell me how to connect cos ive tried over and over and it just doesnt work
I'm trying to buy now but your comment is 4 years ago. 🤔🤔🤔🤔🤔
hook up a chromecast audio
German ?
IA this an app
what a fucken facility..?anyone knows the fucken Bluetooth pin?
ok and how the fuck do i connect my PC?
Por favor en español.
This AAP is shit I'm using this from my sub if enable the equ my sub completely don't sound at all better to use with flat settings
hilarious. "Bluetooth" capability with these speakers is nothing more than remote control of some of the speakers' functionality. Good thing I'm not a DJ who bought a pair and thought he could broadcast music through them via bluetooth.
Hilarious.
I think they cater more to musicians like me that need to be able to tune the speakers but play live music. Forr somebody like me it's awesome.
This app sucks, fails and is very limited
What a complete waste. What's the point if you can't play music through them?
This is the first and LAST time I'll ever purchase a JBL product.
Andy Ziemann just run a auxiliary input into the speaker or a mixer. It doesn’t have Bluetooth because it’s meant for a professional use, which you would likely use a six cord in
hese konek anjir
OTHER SPEAKERS IS MORE SIMPLE..
Subanlo en español
El equipo me pide PIN para vincular vía bluetooh dese saber cual es mi equipo es JBL EON610