Best to stiffen the suspension and keep the desired wheel well clearance than to predict body drop and have an off road wheel well clearance. Thanks for showing the Bugatti body and demonstrating the fitment I appreciate it.
@@RCKnockout Oh, they're not something you buy. They're already on the vehicle. Once someone has pointed them out to you you'll probably be thinking "I was wondering what those were for". You have one on each corner of the car (in the front they'll be on the lower suspension arm). I couldn't find any good pics online so I snapped a few of my own Infraction. The front ones are hidden rather well, but here's where you'll find them: ibb.co/wWg8WYR For easier access to the front droop screws I drilled a 4mm hole in the upper A-arm just above the droop screw: ibb.co/tCNd6FZ The rear screws are easy to find. They're right next to the output cups of the rear diff: ibb.co/P49vh7j Turn them CW to lower the ride height of the vehicle. CCW to raise it back up again. If you're gonna drop the ride height any appreciable amount I would recommend that you then screw the preload collars on your shocks down as far as they will go to prevent the chassis from bottoming out in case the road you're driving on gets a case of the bumpies. Should you have the luxury of perfectly even surfaces where you drive...you can really slam the suspension via the droop screws. When you're fitting a new body to your car what you want to do is find the right balance between the height of the body posts, suspension droop and how much you cut off the bottom edge of the car to achieve the aesthetics you see in your head. I don't know how you see it, but I like to lower my car as far as I possibly can under consideration of the surface conditions of where I'll be driving. I just think it looks sick as tits when a car rides so low you can't help but wonder if the driver's cats eye is kissing the tarmac. It also increases the suction effect created by diffusors for additional downforce. Anyways, hope this helps. Godspeed, Diem
@@diemturner5755 hey I appreciate the info! Yeah i haven’t really messed with any of the adjustments on my Infraction so far. If I do I’ll try to refer back to this
I Hoon mine around quite a bit though…so I’d rather keep the DBoot Hoons on since I wear them down so quick with my drifting…if I was more of a full speed run guy I’d definitely go with the GRP Tires or Foams
Absolutely love the Bugatti 💯 Can't say I've seen anyone rocking that body. Can't wait to see how it holds up. I know you'll test out its durability 🤣 Have a good 1
I see what you do. But i mean can i buy a body where i dont need to cut loose something from the body itself? Maybe if i pay higher? Hope you can help me out:) Got a new sub!:)) But you made a good video so i think i will fix this by my self:) the cutting of the body i mean!
Might be able to use a heat gun to warm up the plastic so you can mold the remaining wheel arch up and away rather than cut more out? Arrma certainly makes dang good looking bodies, don't blame you at all for wanting to keep it pristine!
I absolutely loove the Infraction body. It looks soo cool. BTW, isn't it soo annoying when these small issues turn up. Totally ruins the expeeience. The body should have been a bit wider. The chiron is a se*y car.
The body looks really nice , but before you cut all the arches you could have used a hair dryer or heat gun to warm up the arches then flair them out and as it cools it should hold the shape. Elongate the body mount holes just a tad to get it to sit in the middle.
Looks nice but a lot black,too much black!!!They will be a nice if they have and onother colous also, too broken this black thing and of course and stickers!!!
Best to stiffen the suspension and keep the desired wheel well clearance than to predict body drop and have an off road wheel well clearance. Thanks for showing the Bugatti body and demonstrating the fitment I appreciate it.
No problem! 😉
Dude, you totally missed one of your major suspension adjustment options...droop screws mate. That's how you adjust the ride height of the vehicle.
Who makes droop screws for the Infraction?
@@RCKnockout Oh, they're not something you buy. They're already on the vehicle. Once someone has pointed them out to you you'll probably be thinking "I was wondering what those were for".
You have one on each corner of the car (in the front they'll be on the lower suspension arm). I couldn't find any good pics online so I snapped a few of my own Infraction.
The front ones are hidden rather well, but here's where you'll find them: ibb.co/wWg8WYR
For easier access to the front droop screws I drilled a 4mm hole in the upper A-arm just above the droop screw: ibb.co/tCNd6FZ
The rear screws are easy to find. They're right next to the output cups of the rear diff: ibb.co/P49vh7j
Turn them CW to lower the ride height of the vehicle. CCW to raise it back up again. If you're gonna drop the ride height any appreciable amount I would recommend that you then screw the preload collars on your shocks down as far as they will go to prevent the chassis from bottoming out in case the road you're driving on gets a case of the bumpies. Should you have the luxury of perfectly even surfaces where you drive...you can really slam the suspension via the droop screws.
When you're fitting a new body to your car what you want to do is find the right balance between the height of the body posts, suspension droop and how much you cut off the bottom edge of the car to achieve the aesthetics you see in your head. I don't know how you see it, but I like to lower my car as far as I possibly can under consideration of the surface conditions of where I'll be driving. I just think it looks sick as tits when a car rides so low you can't help but wonder if the driver's cats eye is kissing the tarmac. It also increases the suction effect created by diffusors for additional downforce.
Anyways, hope this helps.
Godspeed,
Diem
@@diemturner5755 hey I appreciate the info! Yeah i haven’t really messed with any of the adjustments on my Infraction so far. If I do I’ll try to refer back to this
Put some grp tires on. They are slightly smaller so it will fit better
I Hoon mine around quite a bit though…so I’d rather keep the DBoot Hoons on since I wear them down so quick with my drifting…if I was more of a full speed run guy I’d definitely go with the GRP Tires or Foams
Doesnt come with stickers huh any idea where we can get stickers for it?
Nope. I’m not sure where you could get them?
No window and lights decals?
Nope doesn’t come with any decals…..don’t think any of the unbreakable bodies do
Just found your channel as I'm into felony and limitless builds as have both and this body looks epic - Gained a New subscriber 👌
Yeah it does look Awesome!! Appreciate the Support!! 👍😉
Time to make a wide body kit!
Not sure about that lol 😂
You did a good job.
Thanks!
Absolutely love the Bugatti 💯 Can't say I've seen anyone rocking that body. Can't wait to see how it holds up. I know you'll test out its durability 🤣 Have a good 1
Thanks! Hopefully it holds up. You have a good one too! 😉
Is the infraction worth it, do you think? I am thinking on buying one
Bro it is It’s something els
Haven’t driven it yet lol. Waiting for Spring weather
Yes bro go for it
Quick question so does it have any decals like front grill or windows or its just plain black
Nope doesn’t come with any of that
Ok thank you I think they should I would look better it looks to plain lol thanks for the info 🤙🏽
@@isaackshirley4695 yeah I agree. I don’t think they make them for this body though?
Guy on ebay sells the sticker kit for this unbreakable Bugatti...
@@kelvinmurray874 nice! Thanks for the info
Hey man. You gonna leave it like it or gonna paint it?
I’m gonna leave it. I’m not sure if its that easy to paint these?
@@RCKnockout alright man cool
Idea put the limitless wing on it it would look killer with the sides
I’ve thought about that actually. Because it looks bare without a wing
@@RCKnockout fits great with slots cut out just like the limitless basically you fit it
@@jasperracingmotorsports7232 I’m definitely thinking about doing something like that
That looks sick
Thanks!
Where did you buy this from?
eBay
Do the tires rub how do you like it looks nice 👍.
Yeah I like it! The tires do rub a little bit
@@RCKnockout thx 💯😎🙏
@@burn1gotbeats no problem 😉
That’s a cool body
Thanks!
Do you remember me.
Nice video man! Can i buy this body total finish? Just to put on my infraction when it come in the mail? Or must i do something? sry bad english:)
I see what you do. But i mean can i buy a body where i dont need to cut loose something from the body itself? Maybe if i pay higher? Hope you can help me out:) Got a new sub!:)) But you made a good video so i think i will fix this by my self:) the cutting of the body i mean!
@@tittentei7331 I’m pretty certain that you have to cut it out yourself….I haven’t seen any for sale already cut out of the mold
Do they do a slash body?
I know they make ones for the slash but I’m not sure if they have the Bugatti one?
Thank's for the infomation and im not looking for bugati one so that's ok
@@dackoson27 no problem 😉
You could have used a heat gun to flare the fenders out further
You’re absolutely right! That’s my mistake I should of thought of that before I started cutting
Wow, cool body
Thanks! 👍😉
I"ve never seen such a great video in my life I wish you prosperity.!!!
형제 친하게 지내봅시다.
😎😎😎
Thanks! 😉
Might be able to use a heat gun to warm up the plastic so you can mold the remaining wheel arch up and away rather than cut more out? Arrma certainly makes dang good looking bodies, don't blame you at all for wanting to keep it pristine!
Now it’s already cut though so I’m not sure if there is enough material to bend outward? They do make good looking bodies! 👍
Top
I absolutely loove the Infraction body. It looks soo cool. BTW, isn't it soo annoying when these small issues turn up. Totally ruins the expeeience. The body should have been a bit wider. The chiron is a se*y car.
Yeah I wouldn’t think it would be that difficult to get the measurements correct beforehand. It is a good looking car though!
Verdade
Do u think they have any for a 4tec 2.0?
No clue
🎉
Need cut fenders off truck body mout themon other for wide body kit bud
Not sure what you mean? I definitely botched it though. I should have used a heat gun to pull the fenders outward
@@RCKnockout cut the fenders off truck body and attach them to your new one to make a wide body kit like a liberty walk car kit
@@RCKnockout just a suggestion would be pritty easy and look amazeing and functional at high speed just a thought
@@mychalpstanton9188 I gotcha. I want keep the Infraction body intact though but thanks for the suggestion!
Get a proline body lift mount raise the car for perfect fit.
Are those made for the infraction?
The body looks really nice , but before you cut all the arches you could have used a hair dryer or heat gun to warm up the arches then flair them out and as it cools it should hold the shape. Elongate the body mount holes just a tad to get it to sit in the middle.
I didn’t think of that. It’s too late now lol 😂
I’ve thought about elongating the body holes but I’m not sure whether or not I want to do that.
Bed liner?
No. Garbage can material
please center it. it looks off
Personally i dont like it i have a skyline one and a c8 corvette for my felony
To all their own
Looks nice but a lot black,too much black!!!They will be a nice if they have and onother colous also, too broken this black thing and of course and stickers!!!
They have different colors. I didn’t really like the other colors though. I’m not sure if they have a sticker kit for this. It would be nice
Looks pants
?
@@RCKnockout the body looks pants
@@domesticcardetailing8295 I don’t understand what you mean by “pants”
That body is a fail man…
What website did you buy this body from ?
EBay