G’day Kev. Thanks so much for reviewing my VIPAZ solid tyres, I’m honored mate. Glad they held up as well as expected and looks like you guys had a blast. 😎👊🏼👍🏼💪🏼
2:54 Lidl packing lots are the best for rc cars. They are usually huge and they have good asphalt. Make sure to go when it's not busy otherwise you will have a hard time trying to keep your rc vehicle safe.
My other half watches all 'her programs' on a 42" screen . I have no other option , after working nightshift , or at any other time , to view RUclips on anything but my phone whilst trying to 'wind down' . Cheers Mate .
Thats what ive been saying.. someone has to make a 1 piece rim & tire thats fully rubber or like longboard wheel material. Theyd have grip, but would also be durable. As well as absorbing shock & bumps far better. They also wouldnt deform like the hollow thin plastic rims he's been using imo
I've run these Vipaz tyres. I've had amazing longevity, at 18 packs one wheel on the first set failed. The 2nd set has 19 or 20 and, while getting thin, are still holding up. The tyres do seem to make the drifting more fluid to me.
Funny, I dealt with Mitch from M2C Racing over10 years ago now, with rear toe blocks for my Losi Ten-T. He sent me a raw, unfinished set to test on my truggy. I'm so glad to see He's still going so strong, and making so many cool parts for so many different cars!
oh dayum! great timing, i just pulled my old wheels and tires out of the trash, i burned them down to the foams!!! grabbing these for some sideways fun, those toyo tires for the Felony were very expensive!
Kevin I just have to tell you how much I love and appreciate your channel and content. I haven't had an RC car since I was a teenager when I had my Tamiya Frog. I have been watching you for a few years now and had planned on getting back into the hobby but my life has been a landslide of disappointments and heartbreak over the last 2 years. I'm not sure when I will be able to afford to start back up with the hobby at this point. It's very possible that I may lose my home and have to file for bankruptcy. Due to physical and mental health issues, I've been unable to work for over a year now. My fiance set up another life with another man in another state and left me abruptly. Your videos bring me a great deal of pleasure, and you are an inspiration. Thank you SO much for doing what you do. It's people like you that make this world a place worth living in Cheers, mate, from California, USA.
Thank you for reviewing the tires.. I have been following this guy for a while that developed them. To see them used like this makes it a lot easier to make my decision on buying the car again and the tires... The stock ones just don't last long enough
He put in his time on these developing showing all the videos. Different versions... I give the man credit for creating a good product for something that we all love... Now if you can make them for the little hyper go truck it'll be amazing as well... And now he's going to get requests for racing tires
hes been at it for years i know. im sure at a request be possibility for you if asked. iv just been searching through comments for past hour (goin years back) as i know i stated in a few places to speedrunners this is what they need. now kevs got some i have no doubt hes gonna get that 250mph if not more 🦾 just need a tread pattern or heat gun to generate grip.
I wonder if a solid rubber tire would work on speed runs. Maybe a rubber thats been treated, so its stronger/harger on the inside. And softer on the outside. So it has grip to get going, then the strength to not be ripped off? I just dont know how theyd get about treating circular rubber to have those properties
1:20 - I had a metal superglue tube pop and spray glue all over my face when I was 12, it completely glued both of my eyes shut for 9 hours+ till the doctors could numb them and rip them apart. Safe to say I’ve never used superglue since…
I built a drifter from the traxxas 4tec 2.0 thing was a beast w/ 3s lipo.... but apparently, to properly run my car, you can't use parking lot asphalt. you need to either use a specific type of flooring, or just more a tar-over... bc the tar evens out the asphalt better. also avoid cracks and "burnouts". but it turns out if you want to drive the RC car on track you are out of luck, as most tracks only allow 2wd, brushed motor setups and some w/ specific tire requirements. so now I have a drifting 4tec 2.0 and no where to run it proper.
Kev has cost me just over 15k this year in RC stuff. I used to be HEAVY into it, got out of it, watched my first Kevin video this year then watched every single one. Ive bought everything he loves and some he kina likes. Cant wait to see if you get the Promoto as well! I love ya Kev, my wallet hates you though! LOL
I would really be very interested to see these tires mounted on an RWD chassis. Pls kev remove front drive shaft for more smoke. Great work like always.
Thats the tyres you should go for with carbon rims in your 250mph. Use additive for more grip or make them in a softer shore. Solid rubber with carbon or alu rims. Use Loctite 405
Loc-tite makes CA glue applicators that work great for glueing tires either at the bead like on the X-MAXX or full surface to surface. They have a stainless needle tip in three different sized for thin, medium or thick glue. (Crazy glue, CA/cyanoacrylate etc) you can reall get the needle in between the tire and wheel.
Issue is after a few mms are worn ur truck pretty much will be scrapping the ground badly. They might last a bit longer but if you think because they are hard rubber they have to go trough the whole thing before you replace think again. Around 93mm Of tire diameter its pretty much done. I would still go grp or silver hoons specially when they are on sale
Kev, let me 3D print you some tires for your infraction. I’m thinking it can go two ways, they may blow to pieces or maybe it will hold up. 🤷🏻♂️ it’s worth a shot if you wanna try it!
this reminds me of the glory days of starting to drift my HPI sprint 2 flux brushless 20 years ago... except ours were PVC plumbing pipe press fittes to the rims with footage pressure XD No smoke though but you could drift forever on a set and make 4 sets of tires for 2 $ XD
hey kev im hoping to make a rc mazda 787b some time in the future how do you start off by building one of your rc cars like the speed world record cars you have
Hey Kev! I'm gonna buy myself an XRT soon, please could you try something for me? I wanna know if the X-Maxx shocks and springs will fit the XRT and give it more ground clearance.
Hello Kevin I wanted to reach out to you to say thank you for providing your honest opinion it was your video were u sent the fireteam of the suicide jump I remember how nervous I was to spend that much on a rc as I'm disabled on a tight budget but you are the reason I decided to take the leap I love it and anytime I am looking for info I go to your site first love from delta colorado USA 😊😊
Solid rubber tires for speed run cars? Softer compound and some longitutinal thread for heat dissipation. I mean like F1 tires were in beginning of 2000s.
Hi Kelvin, I have a Xinlehong 9125 and I want to upgrade it to brushless and I want to use two motors, my question is how to connect two motor cables to one esc, can or should I use two esc?
Kevin, have you ever seen the Movie American Pie? The guy accidentally super-glued his hand to a VHS naughty tape and his hand to his sausage because he thought it was hand lotion. 😂😂 It's a hilarious movie about American kids graduating high school and partying in the 1990s. You must watch it.
G’day Kev. Thanks so much for reviewing my VIPAZ solid tyres, I’m honored mate. Glad they held up as well as expected and looks like you guys had a blast. 😎👊🏼👍🏼💪🏼
Great product mate :) Thanks
@@KevinTalbotTV should put them tyres on the speed sausage
@@KevinTalbotTV awesome thing you did...great video
@@KevinTalbotTVwell deserved review. Congrats.
they will balloon too @@letogrew9640
Yeah I need to get myself a set of those!!! They look awesome!
ayy wassup! big fan of ur vids!
2:54 Lidl packing lots are the best for rc cars. They are usually huge and they have good asphalt. Make sure to go when it's not busy otherwise you will have a hard time trying to keep your rc vehicle safe.
My wife was tired of me monopolizing the TV and watching Kevin all the time. I came home last week and she gave me a 36” TV for my shop…YES!!
Boom!
@@KevinTalbotTVlet's goo!
Does she have a sister?
weird question, why u asking that@@Ivebeenhad
My other half watches all 'her programs' on a 42" screen . I have no other option , after working nightshift , or at any other time , to view RUclips on anything but my phone whilst trying to 'wind down' . Cheers Mate .
*_A PROPERLY BALANCED WITH TINY WEIGHTS, SOLID-RUBBER-TIRE is exactly what is needed for the "Project 250mph Car"!!!_*
yeah
250mph on tires that don't grip worth a damn. uhh.. no...
@@mindwreckRCThats’s true!🤣
Thats what ive been saying.. someone has to make a 1 piece rim & tire thats fully rubber or like longboard wheel material. Theyd have grip, but would also be durable. As well as absorbing shock & bumps far better. They also wouldnt deform like the hollow thin plastic rims he's been using imo
Yknmj❤🎉
I've run these Vipaz tyres. I've had amazing longevity, at 18 packs one wheel on the first set failed. The 2nd set has 19 or 20 and, while getting thin, are still holding up. The tyres do seem to make the drifting more fluid to me.
Funny, I dealt with Mitch from M2C Racing over10 years ago now, with rear toe blocks for my Losi Ten-T. He sent me a raw, unfinished set to test on my truggy. I'm so glad to see He's still going so strong, and making so many cool parts for so many different cars!
when’s the race against the lambo
Probably one more year😂😂
I wanna see that
When he moves to the Isle of Man
When’s kev Gunnar crush the rover with game over 😅 can he destroy something with true sentiment value
Already been done on another channel.
oh dayum! great timing, i just pulled my old wheels and tires out of the trash, i burned them down to the foams!!! grabbing these for some sideways fun, those toyo tires for the Felony were very expensive!
You know there's probably a picture of Kev's face... in the office of most tire companies... with Darts in it.😝
Haha
@@KevinTalbotTVkev can you review on electric hsp rc cars please
Kevin I just have to tell you how much I love and appreciate your channel and content. I haven't had an RC car since I was a teenager when I had my Tamiya Frog. I have been watching you for a few years now and had planned on getting back into the hobby but my life has been a landslide of disappointments and heartbreak over the last 2 years. I'm not sure when I will be able to afford to start back up with the hobby at this point. It's very possible that I may lose my home and have to file for bankruptcy. Due to physical and mental health issues, I've been unable to work for over a year now. My fiance set up another life with another man in another state and left me abruptly. Your videos bring me a great deal of pleasure, and you are an inspiration. Thank you SO much for doing what you do. It's people like you that make this world a place worth living in
Cheers, mate, from California, USA.
keep on keepin' on dude! things get better
Thank you for reviewing the tires.. I have been following this guy for a while that developed them. To see them used like this makes it a lot easier to make my decision on buying the car again and the tires... The stock ones just don't last long enough
is that the chap from Australia?
He put in his time on these developing showing all the videos. Different versions... I give the man credit for creating a good product for something that we all love... Now if you can make them for the little hyper go truck it'll be amazing as well... And now he's going to get requests for racing tires
hes been at it for years i know. im sure at a request be possibility for you if asked. iv just been searching through comments for past hour (goin years back) as i know i stated in a few places to speedrunners this is what they need. now kevs got some i have no doubt hes gonna get that 250mph if not more 🦾 just need a tread pattern or heat gun to generate grip.
Its kinda crazy we are all witnessing Mitchell growing up seeing him from time to time on channel :D
I wonder if a solid rubber tire would work on speed runs. Maybe a rubber thats been treated, so its stronger/harger on the inside. And softer on the outside. So it has grip to get going, then the strength to not be ripped off?
I just dont know how theyd get about treating circular rubber to have those properties
Yeah Kev the brand new arrma infraction is unmolested
Need to run that 250mph car daily.
7:33 I love that wasted thing you do I’ve been watching every upload for over a year and it gets me every time😂😂
"It's a rally car"
(Does a massive wheelie)
Stiven is an real Rc destroyer champion. He is so good at that. You could use him for your durability tests
Steven and Mitchell are hilarious 😂 love those guys
Thanks bud
Great to see Kev using WestOzRC tires. G'day Dave 🥰
1:20 - I had a metal superglue tube pop and spray glue all over my face when I was 12, it completely glued both of my eyes shut for 9 hours+ till the doctors could numb them and rip them apart. Safe to say I’ve never used superglue since…
The pink smoke was like a gender reveal😂
I built a drifter from the traxxas 4tec 2.0 thing was a beast w/ 3s lipo.... but apparently, to properly run my car, you can't use parking lot asphalt. you need to either use a specific type of flooring, or just more a tar-over... bc the tar evens out the asphalt better. also avoid cracks and "burnouts". but it turns out if you want to drive the RC car on track you are out of luck, as most tracks only allow 2wd, brushed motor setups and some w/ specific tire requirements. so now I have a drifting 4tec 2.0 and no where to run it proper.
Kev has cost me just over 15k this year in RC stuff. I used to be HEAVY into it, got out of it, watched my first Kevin video this year then watched every single one. Ive bought everything he loves and some he kina likes. Cant wait to see if you get the Promoto as well! I love ya Kev, my wallet hates you though! LOL
I've spend 400 last month, so I'm cheap I guess.
He's a bad influence........divorce coming soon because I'm up to a new car and parts every month or two, $500 every 30/60 days
😭😂😭🤣🤣😭🤣😂😭
I would really be very interested to see these tires mounted on an RWD chassis. Pls kev remove front drive shaft for more smoke. Great work like always.
Love Steve's EB4. Just converted one of mine. Apart from the fire!
Thumbs up on the new rubber?
We need to change the name to RC car upgrades that no one knew about... Until now
Win my RC Car here - raffall.com/343373/enter-raffle-to-win-arrma-infraction-6s-hosted-by-kevin-talbot (everyone can have 1 free ticket)
Ok
yes ok I will
ok
Is this the Lambo? When is Andy the Landy going up for winning? lol jk.
It automatically charges how do you book the free entry?
Your videos always make me smile, watching you having a blast with your mates, this is what life should be like.
Thats the tyres you should go for with carbon rims in your 250mph.
Use additive for more grip or make them in a softer shore.
Solid rubber with carbon or alu rims. Use Loctite 405
8s steve knows the lingo to well. “It could be worse??” 😂
😂
Always fun watching you out with your mates Kev. The Infraction is a pearler of a car. I like mine, really should use it more often though.
Yes please please please please please please please please please please please please please please
Superglue in the eye……😖
mosfets always pink or purple smoke.
What road tires are be best for the infraction? Something grippy and more durable (if possible, haha).
Loc-tite makes CA glue applicators that work great for glueing tires either at the bead like on the X-MAXX or full surface to surface. They have a stainless needle tip in three different sized for thin, medium or thick glue. (Crazy glue, CA/cyanoacrylate etc) you can reall get the needle in between the tire and wheel.
Did some research after smoking a tamiya ESC. The smoke is pink due to iodine burning off I believe from a failed capacitor.
When did Kev become MrBeast ??😂
_Hoonigan School Of Tire Care_
You are tops, Kev! Whenever we think it, you do it. That is what separates you from the rest! Awesome VID!!!!
Issue is after a few mms are worn ur truck pretty much will be scrapping the ground badly. They might last a bit longer but if you think because they are hard rubber they have to go trough the whole thing before you replace think again. Around 93mm Of tire diameter its pretty much done. I would still go grp or silver hoons specially when they are on sale
I want one for my son Marten!!!
5:21 its a girl 😂
Kev “ I only get 1-2 runs out of these tires “
Also Kev “ check out this burnout “🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣love your videos 👍🏻
Kev, what do you like better a Traxxas Maxx or the Traxxas X maxX.
Those solid rubber tires should work well on your 250 project just cut treads in them or scuff em up ahead of time.
You should use motorcycle grip glue to mount those tyres.
Kev, let me 3D print you some tires for your infraction. I’m thinking it can go two ways, they may blow to pieces or maybe it will hold up. 🤷🏻♂️ it’s worth a shot if you wanna try it!
Those infractions look so fun.
105$ for bare rubber rings? No thank you lol
this reminds me of the glory days of starting to drift my HPI sprint 2 flux brushless 20 years ago... except ours were PVC plumbing pipe press fittes to the rims with footage pressure XD No smoke though but you could drift forever on a set and make 4 sets of tires for 2 $ XD
More rubber for longer burnouts!!! I want the giveaway infraction!
Mitch looks like he lost a bunch of weight. Tell him congrats. Everyone looks like they are having a blast
Poor Andy the Lady! It's now the burnout truck!
I'd use an alloy of PLA and PU for the tyres to make the powder that comes off somewhat biodrgradable.
hey kev im hoping to make a rc mazda 787b some time in the future how do you start off by building one of your rc cars like the speed world record cars you have
Love the Infraction. Don't get out enough with mine. Seriously looking at getting me some of those tyres though mate. Good spot!!!
you should try using those solid rubber tires on your speed questing cars, to fix your tires exploding.
Thank you for the fun! if I had the cash I think this is what I would get into but this is a good way to live vicariously!
Great video 👍👍👍
Pink smoke to match the colour of the chassis
It's crazy that you can get a 205/55/16 tire for just over 30 euros. Rc car tires are proportionately much more expensive.
Would the solid rubber tires not work for the 200mh car? As far as the foam tires coming apart I mean. Wander if the solid’s would hold better…
thanks kev! i love my Vipaz and you will too
Thanks so much for this comment Chris. 😎👊🏼
That's my biggest complaint with the infraction. Definitely giving them a try
Hey Kev! I'm gonna buy myself an XRT soon, please could you try something for me? I wanna know if the X-Maxx shocks and springs will fit the XRT and give it more ground clearance.
Awesome street bash!!! I told you you'd love them!!!! I dont think anybody has more fun than you brother! Thanks for punishing the parts!!!
The richard rawlings of the rc world 🌎 👌
Hello Kevin I wanted to reach out to you to say thank you for providing your honest opinion it was your video were u sent the fireteam of the suicide jump I remember how nervous I was to spend that much on a rc as I'm disabled on a tight budget but you are the reason I decided to take the leap I love it and anytime I am looking for info I go to your site first love from delta colorado USA 😊😊
Solid rubber tires for speed run cars? Softer compound and some longitutinal thread for heat dissipation. I mean like F1 tires were in beginning of 2000s.
Love the upgrade tyres.
Awesome thanks for the info Kevin
Allways a top job.
Love ya work
Is this the same compound or concept you were talking about for the speed runs?
Didn’t even notice the channel had 2.41m subscribers , I remember start watching it when you had like 400k
@kevin you need to get one of those 1/5 rally cars that looks unreal.
That’s smokin! Excellent mod - but much better to be smoking tyres than smoking speed controllers 😂
Hi Kelvin, I have a Xinlehong 9125 and I want to upgrade it to brushless and I want to use two motors, my question is how to connect two motor cables to one esc, can or should I use two esc?
Yes, come on Kevin give us an update on your Isle of Man move
Man those foams looked fun to drive! I wonder if i could get some for a Felony 🤔
i love your videos kevin talbot keep up the good work i want to buy an rc car but i don’t know what one to buy and i don’t have money right now
Hey Kevin, off topic but is that insta 360 go camera you use sometimes worth the 400 dollars it costs. Is it durable?
Feel like a company that actually spent some money making rly good rc tires could make a bit of cash
No roughing. Just use MEK
I don't think most people will drive like that. I've had my ex07 for over a year now and have yet to change the tires. 😂
Can you drift the sausage on the hoons or them new rubber tires
Really nice test for the new tires
Kevin, have you ever seen the Movie American Pie? The guy accidentally super-glued his hand to a VHS naughty tape and his hand to his sausage because he thought it was hand lotion. 😂😂 It's a hilarious movie about American kids graduating high school and partying in the 1990s. You must watch it.
Yeah funny movie!
@@KevinTalbotTV I figured you have, lol. What is a good British comedy that you like?
Put some fans on that ESC and duct it out the body. That shell is a big oven.
I love rc, and my Traxxas broke, and this is my dream rc. I love your videos, and I have been a long time fan. Keep on having fun in what you love.
Well done Kev! This is another great video from you. I love it😀😀
$104 for a bit of rubber tubing sliced into four pieces? I'm in the wrong business!
Love the channel. Monster truck stuff is epic. Same as the RC fun keep on keeping on brotha
Dude thats amazing love your vids and can u do one with a rc helicopter? ❤❤
Find a compound between those rubber n foam tires for your 250mph record rc?
The tire smoke was EPIC!
Would solid rubber be any good for speed runs?
The absolute best tires for hooning
Great upgrade. They r only good for drifting. I love them. Thanks @m2c racing
I like the tires, good job mate!!!
SMOKING. Great vid poor 8s killing his Skyline 😢