Это видео недоступно.
Сожалеем об этом.
Make Your Craftsman Hydrostatic Lawn Mower Go Faster!
HTML-код
- Опубликовано: 23 апр 2016
- In "Taryl VS. Mobile Mower Ron" another informative and funny how-to video, Taryl shows you how to get a little more speed out of your Craftsman hydrostatic lawn mower if it has lost it's speed. Before and After the fix, Taryl is called out by a non-local mobile fix-it guy for giving lessons on the internet. See how Taryl deals with this pesky puke here! Be sure to watch after the fix for the full conclusion to the story. And there's your dinner!!
Please Subscribe to the channel and Thumbs Up our videos and be sure to 'Like' Us on Facebook for all the latest news and updates!
You can pick up all your TARYL APPAREL here: www.tarylfixesall.bigcartel.com
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!
LIKE us on FACEBOOK! / tarylfixesall
We're on INSTAGRAM too! @tarylfixesall
#speed #fast #lawnmower #smallenginerepair #faster #tarylfixesall #grassratsgarage #howto #diy #troubleshooting #mobilemowerron #race #racing #racingmower #speedracer
I learned so much from taryls videos. Knowledge is supposed to be shared and that is just what these guys do. Thank you taryls I continue to get better with every video you make
Love your, well show doesnt feal like just a video. I have completely rebuilt a riding lawn mower recently, new engine,belts, wiring harness, battery,safty switches, lights etc and its your show that helpped me get through it. Thank you Taryl
You guys are incredible. So well done like all of your other videos. So well explained every time, filming is excellent. Thank you very much. AWSOME
Thanks for the vid. Adjusted the bolts on the pedal, ground down the frame for more travel and it worked like a charm. She runs like new.
I love when he takes a drink and throws it!! I love Taryl!!
You make it look so easy, you probably generate more money for repair shops from guys who watch your vids and attempt a DIY, but they have no business around anything more complicated than a screwdriver.
Nice fix Mr Dacktill. When I went to high school I should have taken small engine repair, but no,no I took Integral Calculus which I use everyday- NOT Your vids are great, you can't beat a good laugh and learning something too. Doug L
Intergral Calculus!!! Wooo Hooo!!! I bet that would come in handy working a real job!!! NOOOOOTTTT
I had an integral injury once when I sat on a cactalus . I learned something there, look before you set down ! !
Haha they don't make pop cans like they used to. Fantastic vid guys , best way to start my day a good laugh and learn something. Thanks 👍👍
A great laugh and I learned a few things, how can my day get better!!! Thanks Taryl
Putting the fun back into fixin'..Good stuff.
+ZIGgassedUP Thanks! We try to make this stuff interesting and fun. Glad you enjoyed.
HAHAHA you're gonna be "mobile" in a few minutes.
I however TRUELY appreciate taryl and the rest of the grass rats crew for taking the time to help others. Taryls vids helped me out quite a bit.
What a mow-ron! lol! Another great video my friend. :)
you guys crack me up very funny..but very good info on lawn mowers..thanks
This is absolutely hilarious! Great job!
Forget the mower, I wanna see how fast you can gnaw an ear of corn!
🤣
So damn Funny 🤣👍😂
Haha that's gold!
Maybe that die drinder can help your teef.
🤭
fabulous video Taryl :-) "Look at all the gaskets in here!" gold pure gold!
patthesoundguy; cracked up my g/f cause I go through the the junk mail looking for "gasket material."
Your videos are the best and so helpful. Thank you
lol lol...
Taryl alot of hydro Tuf Torque transmission failing especially on hilly land. They do sell rebuild parts for them I found. Also adding a drain plug to service them would be awesome .I have a JD LT 180 fried one less than 300 hrs. Maybe do a show . Thank you.
hey teryl I love your videos your funny and I found your videos very helpful
Always Good Video. I always hep people out too much at my shop. But i like to make people in trouble, feel good. People stress out, when there mower or toys break. I have had other people tell me i show people too much information on how to fix it. I know they will come back for Parts etc for life. Just by being nice to them, when a problem happens .
Taryl.............dude you are awesome.......I love to watch these while drinking! Keep the comedy coming........only thing better is the Ballad of Ricky Bobby! Where can I get a Taryl T-shirt?
Taryl your videos are only brilliant .Top man at your job 👏👏👏👏I watch in Ireland
you rock dude, love your videos.
is that a bumper boat in the background @ 3:40? I think I see something I want in every one of your videos! Keep up the great work!
I thought it was a personal hovercraft at first viewing.
recently had a similar probably with my dlt 2000. it would intermittently not move and moan very loudly. the unit only has 485 hours (pretty low considering it’s 16 years old) and the original drive belt (from crank to hydro) had never been changed. so i changed it (tried without removing the deck, was able to get the belt off but hard time getting back on, so just remove the deck to save yourself the time). the brake and forward/reverse pedals now feel tighter and tractor moves without the crazy loud moans.
OMG Never have I seen the free mower skit...hilarious...lol
This is good info.. Thanks again dude!
Your the BEST!!! Love the Hillbilly back ground shred!!!
Oh this brought back memories... when I was young some punks locked me in a dumpster and caught it on fire. The fun we had back in the days, lol.
Exactly, they do slow down over time. The thing is it is slow like the thinning of my hair...you don't notice it at first. You might not even notice that it is happening. Those two things tend to creep up on you and you never see them coming.
You ever clean your shower drain 🤔 look at hair brushes 🤔 you obviously have a good wife 😉
I'm learning that there is an incredible number of variations in the hydro static drive controls, even just on Crapsman tractors. This is the third video I've seen on adjusting them and each is different and none are like mine! Good luck!
The principal is the same for all, Increase the control rod throw at the hydrostatic transmission control lever.
hey u are the man !!! i watch your RUclips videos all the time and learn a lot of things about fixing mowers cuz I love working on a motors I have a Jacobsen 36-inch crew chief commercial walk-behind mower I would like to know if you would know about what kind of oil or gear oil I could put in my drive trans box
Call the manufacturer. They will tell you what to put in.
Hey Taryl, I put a intek v twin 25hp on a exmark laser ct. How would wire that since the exmark doesn't have the plug? Thanks
Good laughs and tips too!
having a similar issue with my dlt 2000. you push the forward or reverse pedals and it will intermittently moan very loudly and not move. belt seems to have a lot of slack in it so gonna start with that.
Taryl, you are the man!
Great vid so fixed my cub cadet thankyou
On my cub cadet LT1050 I replace what parts tree calls the “arm control” that is mounted on the transmission and is included in the transmission parts diagram, PART HG-51119. The slot that the shifter from the transmission fit in was worn so when you pressed down on the pedal either forward or reverse it wasn’t actually pushing the shifter coming out of the transmission far enough. I did a temporary fix by putting some small cable ties in the slot.
I have a 2004 LT2000 Craftsman with hydrogear trans that won't go in reverse. Where do you make the adjustment? I installed a new belt. It goes forward fine. Thank you for your input, I have saved a lot of money by taking your advice.
Thank you,I have a workshop I fix lawn mower and other industrial machine but one of it is give me had time.
It a lawn mower,is leaking oil from the air filter,have check the head casket,the breeder,over fill oil and water in the oil,non of it is the problem.
What will u think is the problem
I like the video and it worked well for my craftsman. fixed it up right. I would like to know what hood you swapped on to the DLT 2000 ?Is that a metal hood from another model that will work better than the crappy plastic hood ?
that was funny as hellll you had my rolling on the floor leafing OMG you put him rate where he needs to be in the trash.
Any videos on a john deere gt275 for faster speed? And great videos
How do u have that hook up others how u run your gas to the cab.and how did u hook the reverse panel to the
Nice work a neat fix . Poor Ron off to the Tip. This Grass rats Garage are the mustard .
The guys are on it , and the advice they give is top draw.
Great videos guys, i work on abunch of mower engines , if im stumped on something i find one of your many videos to help me thru my issues, i love it when you say " its not the space shuddle its a lawn mower engine" its great ,alot people tend to overthink problems your right its just a lawn mower engine, keep up the good work
Is it normal for the trans to feel hot to the touch after mowing alot ? It's working great .
Hey Taryl, I have that same crapsman mower with a 54" deck. It was slowing down just like you said, and if I rest my left ankle on the back side of the clutch it would speed up, but I didn't have to do any of that grinding. The clutch linkage had grass on it way up underneath where you couldn't hardly see it that I guess was stopping the belt from being as tight as it should be. Once I found where the grass was hiding and removed it, away she went!
Love your videos, but you convinced me in another video not to do no small engine repair for other people. If I did, all these guys would be bringing me their riding mowers. Ain't no way I am gonna reach down and loosen some guy's belt and jerk his deck off, he can just do that all himself like I do!!!
every time I get through mowing I get out the blower and blow off everything
Taryl , is there any adjustments that can be made on the actual transmission? I use my lawn tractor for winter snow thrower. I had no reverse, purchased new transmission. Reverse improved a little. Changed belt, and no improvement to reverse. Drives forward without any issues.
do hydrostatic trans hold up good?
..I bought a Snapper 22hp
SPX
Hi Taril,
I congratulate you on your successful videos! I have a problem with my Ride on mower Toro XLS 420T. the pto is in operation at all times, the pto switch is in the off position and the pto only turns off when I turn off the engine, with the engine and pto on I put the pto switch in the on position, the engine turns off by itself, check the voltage of the I switched that it goes to the pto and it didn't have any voltage, it seems that electronicity is not reaching it. Do you have any idea what it could be?
Man you should be on TeeVee !!! Funny and informational show. Thank you Taryl and crew. !!!
cajunski1 do you mean tv?
No he shouldn't because they would quash his ideas and tell him to use theirs
Very entertaining and educational .
Any idea how fix a no start issue on a 1997 520H WheelHorse? Battery has a full charge Checked the ignition switch it was replaced and still no start/crank. Under the battery there are tray a series of relays. I can feel one click. I can start the tractor by jumpering the solenoid on the starter. It’s has an Onan P220G engine. Any help is appreciated
Hey taryl nice little vid as always ! But hey for more speed have you done any vids on say ,skimming head and open ports and re cut valve seats ? For more speed say on a 12 up Biggs and Stratton ? Ant from Wales UK .
just when I thought I have seen it ALL "TARYL" makes something new
Did you purge the transmission before this? Just asking as I have had this issue before and found purging brings the drive speed right up.
That happened at my shop more than once.. It's just then I gotta get out ladder to help em out of the trash bin or call the paramedics.
Taryl, I need info on a forward/reverse linkage rod bracket that is inside the frame under the cup holder that guides the rod and keeps it in line. Help, Help, Help... Thx. Oh and its on a toro wheelhorse, 13/38 thx, its not on the print buts on the mowers, except mine. lol
I wonder if you could do a video on an older craftsman rear drive ride on lawnmower that won’t charge the battery and has to use a booster battery to the starter with key on to get it running. I really appreciate and enjoy your videos .
I tell ya Taryl. I've been posting self help small engine videos for going on 9 years, and I've met with some resistance from those who are only out for the almighty dollar, charging way too much etc. You know the drill there. Keep doing what you do my Friend. We are helping anyone with enough common sense (which end of a screw driver does the job) to save their Benjamins. The guys who feel like we're taking business from them are the weak minded selfish tools only concerned with them selves and driving their BMW's etc. Rock On! Zip~
ZippoVarga TV
Back yard all the way !!!!
Hi Taryl. I changed my belt to the next size smaller belt and it made the tractor faster.
You, are a friggin genis! And I meen that.
Some people like MMR don't want you to "Have your dinner !" .... bur Taryl always serves it with style ; )
Could you do a video on how to fix this problem I have a LT 12.5 craftsman lawn tractor and when I put it in gear the belt just shakes and the tires don’t move is there a solution to that or the rerun broken
So taryl, I love the video but how do you rig a hydrostatic for racing?? Is it even possible and why not?
Tim,
I'm looking to buy one of these, was looking at the craftsman 24hp 54cut, it says 7.5mph top forward speed on the specs. I saw a guy that is running 13mph on a poulon, are these essentially the same tractor? But for a different market? My question is, do you think I could get a craftsman up to 13mph with a deck on it? (Not to mow, but just to get around the property). Most of these are 5.5max speed and this particular model has a 7.5max speed stock. Just curious also if it has been already maxed out and can't get anymore juice out if it to squeeze +5mph.
Thanks!
Great vids by the way, funny as heck!
How do I check transmission if the mower battery is dead?
I pulled the release and it won’t freewheel
Drove a forklift at coca cola bottling plant in 86.
They had new cat lifts, with a visible bolt on the floorboard under the pedal
There was a sr. operator who's lift was WAY... faster than the rest, so i noticed his bolt was gone.
After lunch mine was as well. Lol
We had long runs to the loading dock, and he noticed my first run.
He just smiled and winked at me while putting his finger over his lips telling me to keep quiet about it.
Taryl, Man, I luove your videos. Always a good chuckle and great info. How can I contact you to ask a couple questions that I can't find info on the inner web?
I lost it when you were under the mower!
I have a 06 John Deere 155c. The motor vibrates Pretty bad. The crank isn’t bent. I checked. Took the pto clutch off still the same thing. Took the drive puppy off still the same thing. Do you have ay ideas? Love the videos keep them coming
There's your Dinner!
thanks boys
Good fix and funny a as usua. Hope you can help me out.I just bought a Craftsman Model 917.272263. It is the one with the foot pedals to control forward and reverse same as in this video.I was told it needed a valve job but when I went to pick it up the rear wheel won’t turn. I thought maybe the brake was frozen so I took it apart cleaned it & reassembled it . I was able to move it backwards easy but difficult pushing it forward. The next day it was jammed again. I played around with the brake & it loosened up a little but it is still locked. The bypass rod pulls that out so you can disengage the transmission to freewheel is very loose. I checked it does move the connection on the transmission. Is there any adjustment that can be made that I am missing or am I going to have to pull this tranny apart? I would really appreciate your help. JoeZ
Hey Taryl, this question is a little off topic. My Craftsman riding mower will not freewheel. I pull out the disengage lever on the back of the transmission/trans axle, but I cannot push my mower. Why won't my mower disengage? Thank you.
love my hydro. so easy to mow.
How do I convert the shaft or my riding mower? My older engine explode. It was a Briggs and Stratton 22hp 725cc and I swapped with another Briggs and Stratton engine newer and has 2 horse power more and the crack shaft of the newer engine is a bit smaller. The driving pulley and the too clutch won't fit properly? What I can do to solve this?
That part were u grounded it make slot . Can that part come out ? then i can run a endmill to it . GREAT JOB! I KEEP WATCHING YOUR VIDEO . Mine as you go up slightest incline goes slow then level off pick up speed . You think its belt or fluid? You know your tractors .
You "Can" get the hydro fluid out of the transaxle if you take the transaxle out. Then we put synthetic 20/50 motor oil in them or a Cub Cadet hydro fluid and they speed up and good for another 5 -10 yrs. of 7 month mowing seasons here in North Central FL.
Before you do this it would be worthwhile to get under and check if there is any slop in the rod/actuation. I have someone press the gas pedal fully down then try and see if I can push the levering plate on the hydro any more than it already has. If it doesn't budge, then this is all you're gonna get. Same for reverse.
Hey can you do a video on a Murray select zero turn. I own one and I'm having trouble out of the left side isn't working right. Would greatly appreciate it .
WOW i got to say very funny stuff i like your videos very much ,Awsome sence of humor ,& an you know your engines an mowers too ,i am getting the pro series craftsman 42in with 20hp kohler with smart tech ,for half Acre lawn ,but i also have a big driveway an plan to use it for snow blowing ,a few things sold me the sale price 1549.00 for a 2100.00 mower an the 46 in was consumers #2 years in row best lawn tractor,an the welded frame an tougher deck ,over anything its class ,what do you think of the pro series thank you ps thinking of doing an in depth video of the 42in pro series not much on them yet in depth like whats under the hood of them
Taryl, when are you going to do a moving pictoral on the transmissions (crapsman type) that are hard to shift/not going into gear easily? Is there a fix?
You are the guy I go to for "The Fix", keep it up!!!
Coo good fix, thanks
will this work with the smaller ones as well?
Hey mr. Taryl we gotta go bear hunting soon, season is coming up! Im all ready, just got my gun licence last week and my first legal long gun. I saw whole bunch of 'how to' vids on RUclips and i know im ready...
5:51 when he throws the can and it makes a shattering sound 😂
Ikr! Hilarious!
Great video Mr taryldacty
I'm having an issue with my slt 1054 mower. It only now's when I'm making hard right turns...what can cause this?
Thank you
I watched your vide on how to fix a bent deck. I got as far as you need a BFH and knew all I need to know thanks. Great video I wasn't in the mood to laugh considering I was fixing my new JD with thirty hours on it. But I got her cutting grass again thanks! I can laugh now... Damn stumps🤑
Nope Trump is run by Commies....Putin by name!
@@williamjackson5942 Got take your soy enema nancy! Happy 4th of July billy boy. TRUMP2020 🇺🇸🇺🇸🇺🇸🇺🇸
Thanks for the help!! Mine starting to have hard time moving on just littile hill. Even when cold or hot. Thxs for tip. I will check out. Just gave u 5 star on utube. Let u know.
good tips Taryl
I love this
0:33 that "car" doesn't look much bigger than the mower LoL
I have a john deer LX277 hydraulic transmission that started going real slow in reverse. Pully on top of transmission seem to be working.
I have a challenge for you. I have a YT-4000 Craftsman lawn tractor. The transmission was loose on it and was sent out for repairs. When it came back it goes faster in reverse than forward. (used for mowing a cemetery). I can't see a why it does this other than shortening up the road to the transmission a bit. Any ideas?? I tried it up against a rock and it spun so i assume the belt is okay.
thanks Taryl ...
I have a lawn mower that keeps braking the compression relief valve on the camshaft what is causing it to do that
Maybe the governor has been stretched causing the engine to keep blowing up?.
My MTD riding mower loses it speed sometimes - I'm going to replace the front drive belt hoping that will give the mower more power - also, I replaced the rear drive belt.
Hey Taryl could you probably help me with a Craftsman LT2000 that has a side shift. I want it to go faster than it does now but I don't know what to do. It goes around 6 miles an hour right now I want it to go at least 10 if possible. Thanks Man I love your videos