2:30. Sir. Youre right about that water myth about their talking. Small amout of water will be just blown away or vaporized. Not unless the aerox will be fully subermerged in water though...
Thank you for watching and your comments. The Aerox doesn't make a good submarine. My newest short air ram intake setup. The intake inlet sits up a little higher than the factory intake
@@stevekb1dig sir. Just installed ram air/tube on my aerox. And im still waiting for the mushroom filter. And i also ordered the aluminium bracket. Thank you also for the idea... Hope you have a nice stay here in Philly.😁🇵🇭
Thank you for watching 😊 and your comments. Been living in Pozorrubio over 4 years now. It's awesome 👍😊 I have been to San Francisco and the Bay Area a few times. But, originally from New Hampshire.
@@stevekb1dig uncle Steven if u don't mind me calling, I really appreciate and love your videos. I really wanna do something but of many RUclips reviews, most I don't understand because of language and not like yours. U did it with many hours of R&D cum DIY to make one video also editing some funny part like big foot😂. I appreciate your effort and love you for your spirit, passion and sharing
I actually do not have a telephone number here in the Philippines. It's been awhile since I've had a cellphone Sim. Over 4 years. I was a boss before my retirement. Employee calling me often in the middle of the night. I like it better overall without the phone number now 🤪 sounds a little crazy
@@stevekb1dig Uncle Steven, just mainly to share with you, I purposely took a short(poor quality) video on what I installed yesterday. BRD radiator, inner fan upgrade, Samco hose, radiator cap with temperature readings and the strut bar😊😊😊. Thank you for your videos. ruclips.net/video/VxVz_9exYIs/видео.html
How was your throttle body? They said it will ruin it bec of the dirt that becomes carbon and sunddenly it will stick to TB resulting to poor performance and of course spending money to clean it
Thanks for watching and your comments. The shot answer is my throttle body is just fine. No unusual problems from the ram air intake. Only required normal cleaning. Mixed opinions on the ram air intake and pod air filter. Mostly negative. My response is show me.. they can not 🤠 I have been experimenting with this along with some other performance air intake setups over the past 3 years. Check out my RUclips channel. Basically, all you can do is go uphill hahaha. The factory intake and air filter is over restricted. Suffocating the motor so bad that it sucks oil through the crankcase ventilation tube. Personally, I think just about anything is better then the factory air box setup. Mostly because it doesn't suck in any oil from the engine crankcase. So, oil no longer gathers and clings to the walls of the fuel injection throttle body. Acting like fly paper for microscope dirt particles. The Rad brand performance air filter I am using is as good or better than the factory air filter. Also, in another video upload i currently run a different ram air intake tube. This one point a different direction and the air filter is located up inside the body cowling. This solves a lot of potential problems with water infiltration for the rainy season. But, the water is not a big deal. Anything that gets past the filter easily gets pulled into the engine and burns up... We are taking drops.
I found it in one of the local motorcycle parts places. It's actually pretty common. The shop was here in Urdaneta City, Pangasinan Province, Island of Luzon, Philippines
Thank you for watching and your comments Here in this particular part of the philippines. This item is pretty common in a lot of the motorcycle speed shops. It's a DIY part. Made from a strap of pliable aluminum. And, a couple of anodized bolts. As described in the video.
Hello there, i tried to install the ram alongside with the air filter which looks exactly like yours but i've discovered while riding, the entire ram is vibrating vigourously, would it be safe if i didnt secure it like how you did it? Will it come off midway through?
I ran my ram air intake just by itself. Probably for the first month or so. It didn't come off. But, I had my concerns that it might shake loose at some point. So, I started experimenting with some sort of support bracket. The bracket was a positive. It's really nice. No more visions of my ram air intake bouncing down the road in my rearview mirror 😳 hahaha 🤣
Thanks for watching and your comments 😊 The filter is 48mm size The ram air intake manifold in my video is made to fit the Aerox 155. They have others available for different motorcycles, also.
This is another video from my RUclips channel. I actually took a few measurements of the Rad brand air filter and ram air intake. Could be helpful 😉 ruclips.net/video/1YdRF2phv9g/видео.html
Thank you for watching and your comments It is something I did custom. It's meant as a stress relief for the air ram intake tube. Without it the tube is bouncing around a lot.
2:30. Sir. Youre right about that water myth about their talking.
Small amout of water will be just blown away or vaporized. Not unless the aerox will be fully subermerged in water though...
Thank you for watching and your comments. The Aerox doesn't make a good submarine. My newest short air ram intake setup. The intake inlet sits up a little higher than the factory intake
@@stevekb1dig sir.
Just installed ram air/tube on my aerox. And im still waiting for the mushroom filter. And i also ordered the aluminium bracket. Thank you also for the idea... Hope you have a nice stay here in Philly.😁🇵🇭
I think i just saw you last day idol
I saw you in urdaneta cultural
I recognize your aerox
Awesome 👍😎 next time flag me down
nice setup sir, do you still use your modified koso air filter? hehe do u mind if i buy it? hehe how much will it be
Hi bro watching from California but i ilve in pozorrubio pangasinan
Thank you for watching 😊 and your comments.
Been living in Pozorrubio over 4 years now. It's awesome 👍😊
I have been to San Francisco and the Bay Area a few times. But, originally from New Hampshire.
Good review
Thanks for watching 😊 and your comments
Nice work mate
Thanks for watching and your comments ☺️ keeps me busy and off the street at night
@@stevekb1dig uncle Steven if u don't mind me calling, I really appreciate and love your videos. I really wanna do something but of many RUclips reviews, most I don't understand because of language and not like yours. U did it with many hours of R&D cum DIY to make one video also editing some funny part like big foot😂.
I appreciate your effort and love you for your spirit, passion and sharing
I actually do not have a telephone number here in the Philippines. It's been awhile since I've had a cellphone Sim. Over 4 years. I was a boss before my retirement. Employee calling me often in the middle of the night. I like it better overall without the phone number now 🤪 sounds a little crazy
@@stevekb1dig was also a boss, ermmm prefer my current life😂
@@stevekb1dig Uncle Steven, just mainly to share with you, I purposely took a short(poor quality) video on what I installed yesterday. BRD radiator, inner fan upgrade, Samco hose, radiator cap with temperature readings and the strut bar😊😊😊. Thank you for your videos.
ruclips.net/video/VxVz_9exYIs/видео.html
How was your throttle body? They said it will ruin it bec of the dirt that becomes carbon and sunddenly it will stick to TB resulting to poor performance and of course spending money to clean it
Thanks for watching and your comments.
The shot answer is my throttle body is just fine. No unusual problems from the ram air intake. Only required normal cleaning.
Mixed opinions on the ram air intake and pod air filter. Mostly negative. My response is show me.. they can not 🤠
I have been experimenting with this along with some other performance air intake setups over the past 3 years. Check out my RUclips channel. Basically, all you can do is go uphill hahaha. The factory intake and air filter is over restricted. Suffocating the motor so bad that it sucks oil through the crankcase ventilation tube.
Personally, I think just about anything is better then the factory air box setup. Mostly because it doesn't suck in any oil from the engine crankcase. So, oil no longer gathers and clings to the walls of the fuel injection throttle body. Acting like fly paper for microscope dirt particles.
The Rad brand performance air filter I am using is as good or better than the factory air filter.
Also, in another video upload i currently run a different ram air intake tube. This one point a different direction and the air filter is located up inside the body cowling. This solves a lot of potential problems with water infiltration for the rainy season. But, the water is not a big deal. Anything that gets past the filter easily gets pulled into the engine and burns up... We are taking drops.
Hello sir can you tell me where stote you buy the red metal hold your air filter pipe
I found it in one of the local motorcycle parts places. It's actually pretty common. The shop was here in Urdaneta City, Pangasinan Province, Island of Luzon, Philippines
Thanks for watching and your comments 😊
Where did u get the bracket for ram air?
Thank you for watching and your comments
Here in this particular part of the philippines. This item is pretty common in a lot of the motorcycle speed shops. It's a DIY part. Made from a strap of pliable aluminum. And, a couple of anodized bolts. As described in the video.
Hello there, i tried to install the ram alongside with the air filter which looks exactly like yours but i've discovered while riding, the entire ram is vibrating vigourously, would it be safe if i didnt secure it like how you did it? Will it come off midway through?
I ran my ram air intake just by itself. Probably for the first month or so. It didn't come off. But, I had my concerns that it might shake loose at some point. So, I started experimenting with some sort of support bracket.
The bracket was a positive. It's really nice. No more visions of my ram air intake bouncing down the road in my rearview mirror 😳 hahaha 🤣
@@stevekb1dig Nicee!! Will take note on that, thank you so much for the reply 😁
Much better do what he did...
It just a thin aluminium alloy flat bar that you can buy in shoppe for 40-50php. Just to make sure...
Sir, can you directly attach the air filter to the throttle body?
Thank you for watching and your comments
I have seen it in pictures posted on Facebook. Good or bad? Don't know?
from la union
Thanks for watching and your comments 😊
W sometimes go there. Nice rid along the seacoast to San Fernando
Sir may i ask what is the size of the mushroom filter and the ram air tube
Thanks for watching and your comments 😊
The filter is 48mm size
The ram air intake manifold in my video is made to fit the Aerox 155. They have others available for different motorcycles, also.
This is another video from my RUclips channel. I actually took a few measurements of the Rad brand air filter and ram air intake. Could be helpful 😉
ruclips.net/video/1YdRF2phv9g/видео.html
Thank you so much sir it's very helpful and btw im ur new subscriber more power sir
@@aldrinjamesmatias4942 welcome aboard and ride safe 👍👍
What is the name that clamp?
Thank you for watching and your comments
It is something I did custom. It's meant as a stress relief for the air ram intake tube. Without it the tube is bouncing around a lot.
Can try search online for 'exhaust bracket'.. They can be use for this too
@@airilhays I looked around and come up with this. Everything else was the canister filter setup. A lot of money. Doesn't do a lot.