FIRST WATER TEST OF WIFE'S TWIN TURBO LS-POWERED JET BOAT!
HTML-код
- Опубликовано: 5 сен 2024
- Do me a favor and check out my friend's youtube channels for even more content about this incredible Eliminator Daytona jet boat. Without Kevin Smith and Pete Harrell, Newbern and I wouldn't have gotten wifey's boat done and water-tested in time for our family vacation.
/ @ksrperformancefabrica...
/ @realgoodatdoinstuff900
Here's the details on the boat:
21ft long Eliminator Daytona
Dominator Jet Drive by American Turbine and blueprinted by Big League Racing
427ci LSX by Texas Speed
PRC heads
Frankenstein intake manifold
Motion Raceworks throttlebody
Stainless Headers Inc exhaust manifolds
Nelson Racing Engines Mirror Image 72mm turbochargers
Holley Dominator EFI system with Smart Coils, Exhaust Gas Temperature Probes
RIFE data-acquisition sensors
AEM digital dash
Earl's Performance Plumbing hoses and fittings
Motion Raceworks ignition coil relocation brackets, alternator mount and steam line kit
Big League Racing CNC-cut motor plates
Marine Performance Design low-profile jet drive intake
Jeff Bennett-blueprinted keel
Want one of my shirts, hats, hoodies or stickers? go right here:
www.fsmgarage.com
thanks!
-Finnegan
I caught the KSR version Mike
I was so afraid that yellow rag was going to come loose and get sucked into the turbo @24:10
Looked like a few more seconds and it would have came loose at least.
Coming soon on Finnegan`s Garage " The Wife wants more power in her boat and we are installing a Steve Morris LMX. I would have to install a turbo screen. With my luck I would loose my glasses or hat and have it kill the turbo
Correction, installing the engine from game over.. so they can install a SMX into gameover
My hat flew off a few years ago while racing a good friend of mine and got sucked into my turbo. It's 1 hell of a ride when your running about 130 mph and come to almost a dead stop. What really sucked besides having to buy a new turbskie is the water that came rushing in from the back of the boat and swamped the hell out of my new LSX build. Luckily it didn't swamp all my Holly electronics 😱👍😂
@@LymerPnB The 711 in gameover is already a sick Brodix aluminium block and with the cubes it has and the turbos on it, it could easily crank out 3500hp.
The problem with gameover is that the suction hardware on the bottom of the boat where the jet drive ingests water is not yet properly calibrated and at a certain speed the boat is so far out of the water that it can't suck in any more water and hits a speed limit and the engine goes revving to the moon.
If your hat stayed on untill 130 it needed to come off so a helmet might fit.
@@robertlawler1387 well see when you raise your head up slightly over the windshield the wind sorta grabs it and does whatever. Also I dont tell anyone including you on what to do or how to do it because it's YOUR LIFE not mine. So how about you not worrying about mine and trying to persuade me to put a helmet on. I promise you I've been in A LOT WORSE circumstances in my life that required a helmet. So weather I'm going fast in my 1200hp boat or my 3000hp twin turbo race car it's my decision on how much of a dumbass I wanna be. As long as I'm not involving or hurting any other people or things besides me and my own then it's no bodies business but my own. I hope this helps clear things up for you. Now go worry about someone that gives 2 shits about what you think.
When Kevin has board-shorts on, you know shits about to get REAL FAST!
Sick build! 21 daytonas are one of the fastest hulls I know of, the power to weight ratio is really good. That thing is gonna rip once you get it tuned right!
Bet that red and black is as hot as it looks after being in the sun for a little bit.
"BIg Jet boat Dynos you can ride" I love it. Brilliant! That is it exactly.
Heard that too👍
There’s some times an issue with the crank sensor picking up noise from other hunks of metal other than the reluctor wheel.
Others have moved the sensor to the front of the crank on an external wheel to solve it.
Copy that.
dam mike you've built some friendship's with some amazing people over the years.
It seems like he becomes tight with every cool person he meets. He himself has to be coos as a fan
I love Peter's facial expressions, they are priceless!! He is incredible with what he is willing to put up with your shenanigans, obviously a real cool guy from his videos. You guys fit well together
love how compact the turbo system is.
Wow this was weeks ago
Feels like I've seen this movie before.
I love how clean and low profile the instal is. Cool boat indeed 😎
Eliminator did a killer job on the hull and you guys built it to the perfect spec! It looks super stable at high speed! Are you bringing it out to any events soon?
Just bought my first jet boat 20ft 77 Sleekcraft …so we are learning together…thanks Mike and Pete!!!
Thanx! Great episode. Now we are ready for more car stuff.. #1 Caddy, #2 Blasphemi, #3 Race truck and then the Ramp truck if that one is not strict Roadkill stuff 🤔
Blasphemi is back home. so is the ramp truck. will be working on both here real soon. As soon as the engine for the Caddy arrives we'll be back on that project.
@@FinnegansGarage I'm definitely looking forward to seeing some progress on the caddy, it is going to be such a cool thing to see that land yacht flying down a track 🤟
I always had the old ball valve setup on the engine feed line to try and set the flow. Usually after a couple good header burns I’d get the temperature where I wanted it lol
Gate valve works better my friend👍🏼
Gate valve that feed line from the bowl to engine. A bit more precise. Just does not look "cool"....
Kevin's "chooooobody" @12:45... Nope, it's not a cleetus McFarland video! 😂😂😂
Absolutely love that hull design. You can rip in those in almost any conditions... Well, choppier than most jet boats would like. Just smooooothe!
So nice of you to get all the bugs worked out of the wife's boat for you. She will have fun when you have both boats running, you can enjoy the lake together.
Well we SAW Your Wife driving the boat soooo we know its a ton of fun!
Awesome to see how she got there with Kev and Petes help :-)
Man I love jet boats
Congrats Mike, that's a Chip Foose quality looking job. The engine is amazing!
Hi from Botswana I love the videos
Your group is kool. The brain, the welder, the tuner, and the support team. Happy hot rodding on the water.
When Kevin went Alfalfa around 12 minutes 😂
12:05 Kevin has an Alfalfa thing going on. 🤣🤣🤣
Happy 4th ya Guys
A Pleasure to meet ya
I agree Kevin
That is a beautiful hull
Glad things are working out well with it Mike
That's a great family Hotrod
Enjoy vacation
Honestly I think the most important part of this build, isn't the epic looking hull, it isn't the sweet Texas speed twin turbo power plant.
It's the fact that Mrs. Finnegan approves!! 🔥🔥🔥
Couldn't agree more!
@@FinnegansGarage he
I think what you’re experiencing when you let of the throttle and the boat delays to slow down is that the air has packed into the tunnels and you are riding on the “cushion” of air and when you let off the throttle it takes a moment for the boat to settle back into the water
Dam it finally hit clicked! All these years Newbern always reminded me of someone and I just realized it was Silent Bob. You guys are like Jay and Silent Bob!
Alright, you talked me into it. I'm getting an old Eliminator, LSX with twin turbos and see how bad I can mess it up!
Always awesome seeing what these legends are capable of! 🙌
“This is it..the day has finally come! The Christmas Wreath is coming off the door!” well, no. OK, maybe next year.
You need a water deflector for the rear, quite a bit of water splashes over.
16:10 I love that Laptop Guy is toughing it out in the airflow while the other two duck and run for cover!
In a safety critical application like a jet boat, you should 1 MILLION PERCENT have turbo guards.
one hat, one pair of sunglasses etc. and you're getting a water enema.
100⁰
@@fukemallgarage 100 degrees?
He already addressed that possibility in a previous video.
Yes, you've never had a 100 degree enema? I guess you've lived a sheltered life.🤔
He has Kevlar jocks ,no enema
Really inspiring to watch Finn. Keep it up!
Glad you enjoyed it!
The boat is cool, but I want to see more of that Datsun wagon in the background!
Fin happy Wife, happy life. Got two of the best tuners around. Awesome content 👍☺️ Aussie Fan 🤘🇦🇺🆒
Beautiful boat and workmanship, I still think u should call it "Game On", the sister to Game Over.
I appreciate the how the boat became that color excerpt. I want to paint my Mastercraft red but haven't figured out how yet! The pickle-fork jet boat rocks! Looks killer.
Just scuff it real good and shoot some epoxy primer on it. Once you decide to go with a multi stage paint, everything is pretty much the same as painting a car
Mrs Finnegan has got some cool sh1t throughout the years. I didn't see any jackets on that boat, lol, faith in your work. Great stuff guys, stay cool
Two smart guys right there.
Pretty awesome. Boats are so temperamental & I can't imagine how much that increases with a project like this.
25:45,
watching his explanation and mannerisms closely looks exactly like Newbern explaining something... brothers? lol
watch closely at 26:05
I know, I was really thrown off by Pete sounding like Dave.
I worked at Marlin Boats in lamination in 1987 and 88 so I know how fiber glass is done. Nice boat
The boat turned out bad ass have fun this weekend with it hope she digs it I’m sure she will
Reminds me of the 70's Keep it up brings back a lot memory's
I am old don't have a telegram app
Super cool boat. Great to see Kevin from KSR on your channel
Put a hitch ball on the front of the side-by-side. Much easier to manuever down narrow difficult boat ramps
what a clean set up bro.
Sweet...the wifey should be happy 😊 😃 lol . It's coming along nicely 👌
Mike as Hannibal from the A Team, chomping a big cigar, chin in the air, “I love it when a plan comes together !”
Cruising 75, my jet only goes 60 on a good day! That’s a nice float!
Lol!! Same!!!
You guys need more HP and pump work!
@@aztommy1687 More HP just went in. Gained 600RPM, +120 HP. Just need to dial in the handling. Pretty squirrelly when you get out of it now.
Happy Fourth of July you RUclipsrs Finnegan rocks KRS rocks LOVE WATCHING YOUR CHANNELS GODSPEED
"Mount Rushmore of RUclips", I laughed so hard I got a little chubby.
"my wfes " LOL Awesome vid!
I wish I could have Pete tune my c10. he had that boat running sweet!!!
That thing’s a ripper! You’re such a good husband. Hope your wife enjoys it.
You need a boost controller on this!! Such a beautiful boat!!! nice!
What was the hose that was loose it was to the right of the turbo looking at the engine cam.
you need to enter that fishing tournament with the wife's boat😅
Bad ass boat. Would love to see a V drive build though. Jets are cool and all but it’ll never be as fast as a v drive with the same build. Having reverse is a pro though
I had to bite my lip on that comment made in the video as well hahahaha. V-DRIVE FLATTIES 4 EVER BABY!
V-drive boats are badass, and a ton more straight forward to get set up, though I've seen a few of the higher horsepower ones detonate the v-drive and those aren't exactly cheap to replace, too bad that pickup they had with the v-drive got stolen
Thanks!
You bet!
Yes!!!
GOOD JOB guys !!!
Pete is the man...🤘🤘🤘
I have yet to see an LS in a dragboat. Gotta be soon.
That is a damn good looking boat!
Pete and Newbern sound exactly alike lol.
I was waiting for that yellow rag to fly off and go to the turbo
Me too!
Kevin is the man with the plan
Lots of smart peeps in the boat. Happy Fourth of July 2022.
Ls power for the win....I have to put LS in boat for my next project for WhipGetters!!
I could have sworn I saw co2 bottle on the boat. But I like the wastegate design with the screw on retaining ring, I always hated trying to hold it with alot of pressure and thread bolts in.
I think the C02 is to control his jet bucket ( reverse forward control)
Dang that’s hardcore try running some variable geometry turbos like a exhaust break to help with a quicker decel?🧐
A pickle fork is my favorite hull for a jet boat!👍🇨🇱
after double stack on springs on test ride all i could see was yellow rag going into turbo (game over) lol
My dad also built my mom a hot rod. Now he has two hot rods 🙃
That one run all I saw was a microfiber coming loose into the path of an exposed turbo inlet, thankfully there was a handy ziptie around before that went catastrophic
--I saw the same rag, behind the fuel fill i believe, just flirting with flying towards that intake......whoa
Lol!!!! The faster you go, the younger you look! My wife made that joke about me riding a motorcycle without a helmet on.
Boats cool but what about the wagon in the background?
You should do a calibration with puddins fab shop. He’s been redoing a badass mini u-haul trucks, he’s currently putting a box on a Datsun on custom air suspension. I think that would be a fun calibration.
FREEKIN awesome 👍
Been waiting for this.
Better than I imagined half way through.
Thanks Guys!!!💥🇺🇲
Kevin is the man
Summer has officially started now... the boat is on the water! Great seeing Kevin and Pete on FSM! One question, does Dave go out in a chase boat just in case?
Long time coming , but vacations take precedence. Very interesting video. I hope to see more soon. Many thanks. ps; Boat looks stunning .
I could have sworn I'd seen this video already? Am I tripping or what, Mike? lol
Pete and Kevin both already dropped their videos about this. i'm late to my own party. lol
Can we kick the "wife's boat" thing. We're all onto it.. pretty sure she is too ;)
Kidding aside, that's one sweet boat. Nice work!!!
Can't wait for the Steve morrison motor just whole different ballgame then Texas speed motor
I love the sticker on his laptop!
No air cleaners on the intake side of the turbos?
Cool build still curious what happened to all the above transom exhaust laws.
Cool boat! Can you use Co2 to control the gates and blow off valve like drag racers do?
It's interesting that an adjustable water pressure regulator wasn't part of the build.
You ain't kiddin.
Enjoyed that, thanks for posting.
I didn't see it in the video, did he say where they are going on vacation? I saw a new red jet boat in our lake yesterday on a very large lake in Michigan.
Ha that's so Homer Simpson, "Honey, I bought you a speed boat, it's yours"
Happy wifey hopefully.
Why no mac valve? I can 3psi to 30.