I’m printing this plane right now, 120% bigger and it’s coming out lighter with 8% grid infill, and 0.4 wall thickness, still very strong 💪 the original settings are not optimal
The ‘all the parts’ refers to a esc, motor, four servos, and blades, so you don’t have to buy them separately, the rods you will have to buy separately, you will need 2pc of 500 x 1.1mm rods, plus the 10pc 1.2mm rods, and if you are new to rc, you will need a transmitter and some battery! I am coming out will another video that will be little more detailed! I would have posted it, but I want to have it flying a bunch in the video and I haven’t got out to doing that! I also am thinking of selling kits with all the 3d printed parts plus electronics! So stay tuned!
It's cuz that one I never put the pins in the wing, I have learned the hard way and now I designed some, new video with this model flying is coming out tonight or Monday!
No, but I really want to, every time I try to run fusion 360, my computer shuts down, I have an HP Spectre X360, which it supposed to be a nice computer, but it shuts down, so whatever.
@@RobertGRitz Hey Robert question for you on the canopy, I see that there are spots to insert magnets to hold the canopy in place. On the Fuse I only see a spot at the rear side in the fuse to hold the canopy in place how did you get it to hold in the front end?
Started printing it a couple days ago! Can't wait to put it together!
Sweet! Post the make on printables! What infill and wall thickness did you do?
I’m printing this plane right now, 120% bigger and it’s coming out lighter with 8% grid infill, and 0.4 wall thickness, still very strong 💪 the original settings are not optimal
OK cool. I’ll have to try that! I’m printing another one in lw pls! See how it does. thanks for the advice if it works out good I’ll change it!
How does control work? I've never done any of this but it looks great. The 'all the parts' listing also doesn't seem to include the rods?
The ‘all the parts’ refers to a esc, motor, four servos, and blades, so you don’t have to buy them separately, the rods you will have to buy separately, you will need 2pc of 500 x 1.1mm rods, plus the 10pc 1.2mm rods, and if you are new to rc, you will need a transmitter and some battery! I am coming out will another video that will be little more detailed! I would have posted it, but I want to have it flying a bunch in the video and I haven’t got out to doing that! I also am thinking of selling kits with all the 3d printed parts plus electronics! So stay tuned!
Should I use PLAaero/lightweightPLA or just regular PLA?
I used regular this is exactly what I used:a.co/d/4JipknZ
I am printing another one in gray also!
It looks like much of the strength comes from rods so I would go for it just maybe add a little bit of reinforcement here and there
@@morkshanmedia3998 Yes, I will be posting another video with that!
Nice.....fly?
Yeah, I printed 4 of these models and the one I recorded flying didn’t have wing reinforcements, so it fell off after the video ends! lol!🤣
Hey what battery are you using? I have a 3s 2200Mah will that work?
That’s exactly what I’m using! perfect 👍
@@RobertGRitz oh wow perfect but does it even fly, no offence diddent look like it flys?
It's cuz that one I never put the pins in the wing, I have learned the hard way and now I designed some, new video with this model flying is coming out tonight or Monday!
And where can I find the control?
What do you mean by "control" if you are wondering about the controller I use, I use a flysky fs i6! Feal free to ask if you have any more questions!
That's right 'controller'
my english not good
flysky fsi6 I believe
How long did it take you to print all the parts at once? I have the same printer (Ender 3 V3 SE). Thank You
Just one night! I would recommend 0.6 walls and lightning infill 10%
I’m going to update the g- code right now in printables
did you design this yourself?
No, but I really want to, every time I try to run fusion 360, my computer shuts down, I have an HP Spectre X360, which it supposed to be a nice computer, but it shuts down, so whatever.
@@RobertGRitz if you didnt design it why are you linking the stls to your printables account?
Because it’s a remix, if you look on the printable model, you’ll see the original one
@@RobertGRitz Hey Robert question for you on the canopy, I see that there are spots to insert magnets to hold the canopy in place. On the Fuse I only see a spot at the rear side in the fuse to hold the canopy in place how did you get it to hold in the front end?
I had to cut holes to get the magnets in there