@@ZackFreedman Y'know, butt jokes asside, couldnt you turn that into a screwclamp kind of setup? Then you could fit that tush real tight and screw it till it sticks.
At first I was scared when he chloroformed me, but then I was intrigued when he started talking about 3d printer things, and now I'm glad he took me home after knocking me out.
For the bolt sizer you could also add hex cutouts so you can super glue hex nuts into it to see what the exact threading is for that bolt (like a 10-32 vs 10-24)
@@Pegaroo_ you can tell the pitch of SAE as well and whether its fine or course (UNC or UNF for SAE), but at least at my job I often run into issues where we have a mix of sensors or components made in the EU and some made in USA so there's a mix of Metric and SAE bolts, and it can be hard to distinguish if a random bolt or threaded hole is metric / SAE and also if it's a UNC or UNF thread (although I guess I run into that issue more with tapped holes on machines we are retrofitting or don't have cad data or drawings for rather than loose bolts).
I like the idea of the dremel storage tower but it is literally available, filled with dremel tools, and is only slightly more expensive than the raw plastic filament needed to print it.
@@BlondieHappyGuy Is 30 hours considered a lot? Majority of my parts are between 10-20. Biggest ever was 139 (in 5 pieces). Maybe I have my detail set too high.
Zack really spilled an assortment of bolts just for a 5 second clip. When it took him probably 5-10 mins to find and re sort them. That’s dedication right there. Respect ❤
The Prusa adaptation of the TUSH, used on the Prusa Mini, is far superior to the regular TUSH. It is very adjustable without falling over, and if you put non-slip foam pads on the bottom of the Prusa Mini spool holder, it does not slip on most surfaces.
I bought my first 3D printer two years ago. I have spent enough time watching RUclips videos on 3D printing that Noah could have built the Arc twice. I have never ever seen or heard of you. You, sir are the most entertaining maker I have come across on RUclips...HANDS DOWN! Love the humor, love the shooting, and your video editing. I think if you keep producing content of this caliber, you're going to grow to have a huge audience, keep up the great work, you have a GIFT! I'm looking forward to much more content! Bless you, brother!
No offense to this creator but Devin from the channel "Make Anything" is hands down the most entertaining and creative/inspiring maker on youtube. Check him out
Why not add two features to the tush? 1 - grippable feet on the bottom of each tush so these don't slide around. 2 - a socket that allows a thick spoke to plug into the sides that is telescoping. This would perfectly space your tush feet apart to accommodate your spools.
I dunno being woken up to a forced education describes the public school system pretty well these days. Although you gotta bring your own chloroform or else you need to talk to one of the creepy kids.
Jake C Hmm... true I guess. I just didn't notice any actual education going on at the one I was atacking as I didn't learn anything there. I did tons of studying outside in my own time but didn't learn anything from school. I love education, just not schools.
#5 is an umbrella swift, but for fillament. I'm also a knitter, and yarn can come in hanks. You use an umbrella swift (or a grumpy partner) to hold the hank while you wind it into a ball.
I'm a science and robotics teacher from South Africa. Just stumbled onto your channel today and it is amazing. Your channel is awesome, informative and gave me so many ideas for my robotics classes.
RUclips algorithm on point! So glad I stumbled over here. I didn't realize how badly I needed hot nerdy talk delivered with comedic punchlines. Thanks.
Jokes aside, two things that could improve the TUSH; A) make one side of the base taller than the other so it helps guide the filament spool. B) put Lego Technic axle mounts in it, so you can separate them and adjust distances using technic axles
The Prusa Mini comes with a better version of the Tush in the package. It's the same idea but has two adjustable connectors inbetween to hold it together, as well as rubber pads.
That dremmel tool holder is cool, but it could be more manageable to print by making it into connectable smaller modular prints that a user can add to as they get more accessories.
So fun fact, I initially tried to split it into smaller panels, but Fusion 360 is so bad at importing STL’s that I just gave up and wasted half a roll of plastic.
6:08 I've actually printed this Tush before and I use it for my spools, however they keep getting knocked over with the slightest touch and it's really annoying so I designed a bracket that connects them together so they don't tip over and they're always the right width apart.
6:08 I had purchased a big 8kg spool of filament. Not having any ball bearings, I made them myselfes. Luckily I had some 12mm steel balls and have a little practice using OpenSCAD. Now my big spool turns horizontal, as this is the easiest way to do with just one (big) printed ball bearing. Should anyone be interested, the ball bearing is customizable to the needs within limits. If I get requests, I might upload it to thingiverse.
At first I was scared when he chloroformed me, but then I was intrigued when he started talking about 3d printer things, and now I'm glad he took me home after knocking me out.
Man, the script on that Dremel one was incredible! Thanks for all the good ideas! I'm currently printing drawer separators after realizing I can use my printer for actually sensible things.
New to your channel, I feel like this is one of the most underrated channels on RUclips. Also all ten were great but I really like number five for the 3-D printer been there before. Great video!
Aww, shucks. I try to make the best videos I can, and I’m glad you enjoy them. I actually have two of those filament holders, one for large reels and one for small. They’re so useful.
That Altoid boxes are wildly used as Keter class secure containers was one of the lesser known facts, now we know how! Thanks! My next project ASAP. Also the holder.
I love tushies, they're the best! I swear, I could spend all day looking at those tushies work, and I wouldn't get tired! The only problem is that the bigger ones are harder to clean, so I would recommend sticking to a decent sized tush (avoid the small ones, they're too flat to be useful)
The TUSH problem could be solved by having little holes in the bottom of each to glue some strong magnets. Then you could just have a little metal plate on the surface to stick them to. That way you can have a stronger way to secure it without sacrificing the versatility of being able to place them where ever you want
No no no you dont want glue anywhere near a tush. the point of the tush is to have easy access to its use. You always want the oposite of glue around a tush, which is lube. lots of lube so that the tush can always be accomodating for its use. Some good high capacity penetration, I mean fillament pulling.
@@PutsOnSneakers Did you read his comment? "That way you can have a stronger way to secure it without sacrificing the versatility of being able to place them where ever you want."
Automatically trust a dude more if theyre a lefty Also as a lefty I use the Logitech g903, its an ambidextrous wireless mouse with a faster response time than most wired mice (it do be way too much money tho)
By the way, the TUSH has a lot of possible bases that you can print. I use TUSH in my filament containment enclosure with clip in bases to keep everything running properly. Thingiverse has em.
The dremel is great and all but you should look into getting a flex shaft rotary tool. It had way more power and a foot pedal. Yeah its a little bit more cumbersome so it doesn't completely replace a dremel but for those larger projects its amazing.
I woke up not knowing what happened before. I could vaguely remember a guy asking me to smell a rag, don't know what happened after that. Also, for some reason I have one more subscription on RUclips.
I found some TUSH remixes that use fatter tracks for better stability and, best of all, trays in which to put them so they don't go flopping around. Thing #s 3353204 and 4262784, for the curious. Also, thank you for sharing the loose filament spool! Since the day it first arrived I have very much enjoyed my Maker Box subscription, except for the times where I load the little coils onto a spool by hand. I have this filament winding station that has made a truly awful task into merely a laborious and annoying task but I want to try this loose filament spool instead to see if I can print tangle-free and not spend billable hours winding by hand.
yeah this is, by far, the funniest and most interesting "top 10 prints" video I've ever seen. I might actually use some of this stuff!! subscribed! can't wait for more.
That's awesome. After you're done, put pictures up on Thingiverse so the original creators can see that people are making their designs! It always feels good when someone posts a make of my projects.
Even though your VO guy miss-pronounced it I want to thank you and congratulate you for properly pronouncing “solder” as (SODD-er). Hardly anyone pronounces it correctly on here but you did! Thank you!
You referring to the wheelchair? Those are often used by low budget filmmakers in place of a dolly. Lock the front wheels and it will roll smooth and straight.
Great video, really enjoyed that, preferred your voice over the computer voice though. Subbed, nice to see a small 3D printing channel growing, keep the videos coming.
i have only just found this channel and your rhetoric on the dremmel tool holder had me in tears (of laughter, not sad ones). I love the delivery of your quick fire commentary. looking forward to plunging in to your back catalogue for more techie or nerdy goodness
@@GodzillaGoesGaga I printed mine in PLA, didn't see too much deformation upon cooling. The sizer works really well, and there are no issue trying to figure out the screw sizes. With that, all of my screw sizes are at least 2mm apart.
@@DargoDog Cool. Thanks for the info. Good to know. I've had tolerance issues when making threads so there definitely is some deviations from spec. It might be related to the volumetric size and on smaller dimensions is less significant ?
Some of these will be very useful for me, thank you! I have a few lithium cells just laying around, so I'll definitely be putting them in an Altoids tin. I'm gonna have to give some thought to reorganizing my workspace after seeing that Altoids shelf!
It took me a rewatch but I remembered exactly that "What are you" scene for the screw jigs. Glad to see someone else is a fan of CR, specifically that episode where he covered the Ghostbusters RPG.
seems like the tush would benefit from being a little plumper on the bottom side
This guy gets it
Perhaps a wider base ?
@@ZackFreedman 11q111q
i have some tush analogue thats connected to each other by some rollers (will fit narrow or wide roll)
@@ZackFreedman Y'know, butt jokes asside, couldnt you turn that into a screwclamp kind of setup? Then you could fit that tush real tight and screw it till it sticks.
this guy always looks like he's about to tell me my power level.
Holy shit bro my sides
ITS OVER 9,000!!!!
Your Midi-chlorian count is off the charts!
This made me laugh out loud in the real world
At least 7
At first I was scared when he chloroformed me, but then I was intrigued when he started talking about 3d printer things, and now I'm glad he took me home after knocking me out.
Tush okay?
Lol, this comment is amazing
My legs don't look like that.
There's a bit about systemic racism in Dave that I was reminded of.
For the bolt sizer you could also add hex cutouts so you can super glue hex nuts into it to see what the exact threading is for that bolt (like a 10-32 vs 10-24)
are you done yet?
@@mrk8212 huh???
That's clever, great idea
or just use metric, it will either be a coarse or fine pitch for a given diameter and you'll be able to tell the difference just by looking at it 😜
@@Pegaroo_ you can tell the pitch of SAE as well and whether its fine or course (UNC or UNF for SAE), but at least at my job I often run into issues where we have a mix of sensors or components made in the EU and some made in USA so there's a mix of Metric and SAE bolts, and it can be hard to distinguish if a random bolt or threaded hole is metric / SAE and also if it's a UNC or UNF thread (although I guess I run into that issue more with tapped holes on machines we are retrofitting or don't have cad data or drawings for rather than loose bolts).
Ayy RUclips recommend is getting better :), finally a new RUclipsr who is relevant to my interests, and has amazing comedic taste.
Aww, you're too kind. I'm just a dude trying to build cool stuff but making videos instead.
Brother you are telling me! This guy is great!
accurate
True this video poped on my feed
Same here
I like the idea of the dremel storage tower but it is literally available, filled with dremel tools, and is only slightly more expensive than the raw plastic filament needed to print it.
@@BlondieHappyGuy Is 30 hours considered a lot? Majority of my parts are between 10-20. Biggest ever was 139 (in 5 pieces). Maybe I have my detail set too high.
For about 15 bucks at walmart and 15 minutes there and back you can get all the dremel parts in a kit
@@justaguydoingguythings2762 walmart one definitely isnt that good
That Altoids eject button gave me Mac classic flashbacks, of getting hit square in the Adam's apple by an ejected floppy.
The big kind or the small kind?
That was God's way of telling you to get a real computer 😉
@@Warhawk76 back then, a Mac WAS a real computer, then they started degenerating into new-age hipster garbage.
Zack really spilled an assortment of bolts just for a 5 second clip. When it took him probably 5-10 mins to find and re sort them. That’s dedication right there. Respect ❤
'unless you're in a wheelchair' my god haha
As a wheelchair user, that was hilarious to me.
Came here to say the same thing, literally laughed out loud to that
The Prusa adaptation of the TUSH, used on the Prusa Mini, is far superior to the regular TUSH. It is very adjustable without falling over, and if you put non-slip foam pads on the bottom of the Prusa Mini spool holder, it does not slip on most surfaces.
I'm watching this but I don''t even have a 3D printer
That's okay, everyone should have goals.
well then, save up 150€ and get a cheap chinese one
@@mawi4112 yes like creality
It is worth it seriously there is something for everyone
Same
I bought my first 3D printer two years ago. I have spent enough time watching RUclips videos on 3D printing that Noah could have built the Arc twice. I have never ever seen or heard of you. You, sir are the most entertaining maker I have come across on RUclips...HANDS DOWN! Love the humor, love the shooting, and your video editing. I think if you keep producing content of this caliber, you're going to grow to have a huge audience, keep up the great work, you have a GIFT! I'm looking forward to much more content! Bless you, brother!
Well said. I totally agree. Which incidentally saves me the time to write praise like this myself. More time for printing, yay!
No offense to this creator but Devin from the channel "Make Anything" is hands down the most entertaining and creative/inspiring maker on youtube. Check him out
Me: hears him say "Keter"
Also me: a fellow intellectual, I see.
█████ ███ ████ ███
Relatable
@@ZackFreedman [REDACTED]
Scp 173 has breached containment
@@ZackFreedman btw it's pronounced key-terr
2:02 "Unless you are in a wheelchair"
That was a good one and caught me off guard, thank you for the laugh! (And maybe useful prints)
"Just spread your tush to the appropriate width, get your spool up in there and start extruding" 😆😆😆
Why not add two features to the tush? 1 - grippable feet on the bottom of each tush so these don't slide around. 2 - a socket that allows a thick spoke to plug into the sides that is telescoping. This would perfectly space your tush feet apart to accommodate your spools.
I freakin' love your description of the Dremel Bit Storage print!
"the sheer girth of my maker c*ck"
That got the subscribe from me
I've never been chloroformed and woken up to a forced education before.
I prefer it to high school quite frankly.
I dunno being woken up to a forced education describes the public school system pretty well these days. Although you gotta bring your own chloroform or else you need to talk to one of the creepy kids.
Jake C Hmm... true I guess. I just didn't notice any actual education going on at the one I was atacking as I didn't learn anything there. I did tons of studying outside in my own time but didn't learn anything from school.
I love education, just not schools.
I mean, at least this is entertaining instead of just mind numbing.
I literally gasped and sat back in my chair when you dropped those screws. Most painful thing I've ever witnessed
#5 is an umbrella swift, but for fillament. I'm also a knitter, and yarn can come in hanks. You use an umbrella swift (or a grumpy partner) to hold the hank while you wind it into a ball.
Bonus points if your husband’s name is Hank.
That Dremel storage bin ROCKS!
Two things it needs.. A hinged dust cover, and a holder for the dremel itself! :)
I'm a science and robotics teacher from South Africa. Just stumbled onto your channel today and it is amazing. Your channel is awesome, informative and gave me so many ideas for my robotics classes.
RUclips algorithm on point! So glad I stumbled over here.
I didn't realize how badly I needed hot nerdy talk delivered with comedic punchlines. Thanks.
Everyone of this amazes me. But those that don’t require screws, glue or any kind of fixations have a special place in my heart.
Jokes aside, two things that could improve the TUSH; A) make one side of the base taller than the other so it helps guide the filament spool. B) put Lego Technic axle mounts in it, so you can separate them and adjust distances using technic axles
0:50 - This part is horrifying to watch. Forget stringing, this dude has spaghetti noodles on his prints.
@HeyNeonKABOOM! yeah no. It’s not. His print temp is too low or z axis is way off.
The Prusa Mini comes with a better version of the Tush in the package. It's the same idea but has two adjustable connectors inbetween to hold it together, as well as rubber pads.
You should be at least nominated for an Oscar for best screenplay 👏👏👏 sublime 10/10
That dremmel tool holder is cool, but it could be more manageable to print by making it into connectable smaller modular prints that a user can add to as they get more accessories.
So fun fact, I initially tried to split it into smaller panels, but Fusion 360 is so bad at importing STL’s that I just gave up and wasted half a roll of plastic.
The sheer delivery of the dremel bit storage is what sold me entirely.
6:08 I've actually printed this Tush before and I use it for my spools, however they keep getting knocked over with the slightest touch and it's really annoying so I designed a bracket that connects them together so they don't tip over and they're always the right width apart.
I just got my first 3D printer yesterday, and I think I'm more excited about finding this channel now than I am about the printer.
I didn't think I was going to like this, but then I ended up liking this.
About the screw sorting jigs, I suggest sticking a magnet on the underside. It will pick up the screws as well as sort them.
The Prusa Mini's spool holder is basically a TUSH with an adjustable cross-support. Would recommend!
I like adjustable Tuches 🥴
6:08 I had purchased a big 8kg spool of filament. Not having any ball bearings, I made them myselfes. Luckily I had some 12mm steel balls and have a little practice using OpenSCAD. Now my big spool turns horizontal, as this is the easiest way to do with just one (big) printed ball bearing.
Should anyone be interested, the ball bearing is customizable to the needs within limits. If I get requests, I might upload it to thingiverse.
I stumbled across this channel and liked the humor from the start. Then I heard you casually say "keter class" and knew I had to subscribe 😅
At first I was scared when he chloroformed me, but then I was intrigued when he started talking about 3d printer things, and now I'm glad he took me home after knocking me out.
I came to the comment section looking for this comment seeking fellow scp agents
Man, the script on that Dremel one was incredible! Thanks for all the good ideas! I'm currently printing drawer separators after realizing I can use my printer for actually sensible things.
New to your channel, I feel like this is one of the most underrated channels on RUclips. Also all ten were great but I really like number five for the 3-D printer been there before. Great video!
Aww, shucks. I try to make the best videos I can, and I’m glad you enjoy them.
I actually have two of those filament holders, one for large reels and one for small. They’re so useful.
That Altoid boxes are wildly used as Keter class secure containers was one of the lesser known facts, now we know how! Thanks! My next project ASAP. Also the holder.
when he said "Just spread your tush," I did the exact opposite of feel that.
LMAO!
So youre telling me I shouldn't have a giant ziplock bag of miscellaneous batteries just chilling in my desk drawer?
"Keter Class Secure Power Containment". Lol alright I like you.
That's when I knew this was a man of culture.
I love tushies, they're the best! I swear, I could spend all day looking at those tushies work, and I wouldn't get tired! The only problem is that the bigger ones are harder to clean, so I would recommend sticking to a decent sized tush (avoid the small ones, they're too flat to be useful)
The TUSH problem could be solved by having little holes in the bottom of each to glue some strong magnets. Then you could just have a little metal plate on the surface to stick them to. That way you can have a stronger way to secure it without sacrificing the versatility of being able to place them where ever you want
No no no you dont want glue anywhere near a tush. the point of the tush is to have easy access to its use. You always want the oposite of glue around a tush, which is lube. lots of lube so that the tush can always be accomodating for its use. Some good high capacity penetration, I mean fillament pulling.
@@PutsOnSneakers Did you read his comment? "That way you can have a stronger way to secure it without sacrificing the versatility of being able to place them where ever you want."
r/woooosh@@paulreeder5241
One of my favorite things about getting a 3d printer, is finding this channel.
You are the coolest super nerd I have seen in a long time !! Deserving of a 3d printed trophy 🏆 👏 good luck on your channel. Very well composed
Dude, your sense of humor is something else. "Oh, you are awake..." I lost it really hard.
The voice: "Number 3 the Tush"
The screen: "NuMBeR 4"
2:40 Can confirm.. My wife ran away with my 18650s... How am i gonna power my flashlight now?
Automatically trust a dude more if theyre a lefty
Also as a lefty I use the Logitech g903, its an ambidextrous wireless mouse with a faster response time than most wired mice (it do be way too much money tho)
By the way, the TUSH has a lot of possible bases that you can print. I use TUSH in my filament containment enclosure with clip in bases to keep everything running properly. Thingiverse has em.
I really like the USB holder and the Altoids tin rack. Thanks for including the thingiverse links!
The line about the girth of your maker **** earned my subscription. Make sure anyone who judged you for writing it knows that it paid off :)
I love the dremel bit holder. Makes me think I can wear out a 3D printer just organizing all of my tools
The dremel is great and all but you should look into getting a flex shaft rotary tool. It had way more power and a foot pedal. Yeah its a little bit more cumbersome so it doesn't completely replace a dremel but for those larger projects its amazing.
I actually have the flex adapter for the Dremel, but I really should get another pedal. I built my old one into a project and just never replaced it 😐
"Hello hardware hackers!" **Smashes subscribe button**
No wonder the subscribe button is looking a bit battered!
Why is this informative and actually funny I thought youtube only allowed one of the two in videos
I woke up not knowing what happened before. I could vaguely remember a guy asking me to smell a rag, don't know what happened after that. Also, for some reason I have one more subscription on RUclips.
Watching this is like experiencing an acid trip without actually doing acid. 10/10 would watch again.
@6:11 there’s a joke in that whole segment, but I’m not gonna be the one to say it...
THATS WHAT SHE SAID
For the last year I couldn't remember why I bought bearings.... it was the spool roller! Thank you!!!
I think you are the most eloquent youtuber I've ever seen 😂
Most eloquently crazy.
I found some TUSH remixes that use fatter tracks for better stability and, best of all, trays in which to put them so they don't go flopping around. Thing #s 3353204 and 4262784, for the curious.
Also, thank you for sharing the loose filament spool! Since the day it first arrived I have very much enjoyed my Maker Box subscription, except for the times where I load the little coils onto a spool by hand. I have this filament winding station that has made a truly awful task into merely a laborious and annoying task but I want to try this loose filament spool instead to see if I can print tangle-free and not spend billable hours winding by hand.
yeah this is, by far, the funniest and most interesting "top 10 prints" video I've ever seen. I might actually use some of this stuff!! subscribed! can't wait for more.
Your right the number one pick is the best and a must have!!!!
FYI: "USB cable holder by Philipp Kolb" has been removed
Oh no! I’ll see what I can do.
I fixed the link! I forgot to paste the last number of the item ID. It should work now! Thanks for the heads up!
The alliteration alone makes this video worth watching... "colossus of collets collates...."
Nice work.
The first and second ones are going to be printed tonight, awesome video overall. Can’t wait to see what other videos you’ve made 😁
That's awesome. After you're done, put pictures up on Thingiverse so the original creators can see that people are making their designs! It always feels good when someone posts a make of my projects.
@@ZackFreedman New 3d Printer = New Thingiverse Account...Posting to commence shortly!
It seems very useful. I got it~~I will print it the same with my company's printer!
這個看起來很有用，我學會了！我這就用公司的3D打印機試試！
So this is where geekdom finally ends up? Impressive video on things I didn’t even know I needed. Time to wake up the printer. 👍🏻
Why even HAVE a 3D printer if you're not gonna clutter your room up with quasi-useful gizmos?
New favorite channel for sure
Ah perfect, I needed something to load up my printers with today!
Even though your VO guy miss-pronounced it I want to thank you and congratulate you for properly pronouncing “solder” as (SODD-er). Hardly anyone pronounces it correctly on here but you did! Thank you!
Dude, You are rocketing towards the top! Keep up the good production of video!
Great description of the Monolithic Dremel tool holder!
Mechanical keyboard, likes wired mice, great humour, hardware hacking - instant subscribe!
Wow, you went to Target and survived the COVID apocalypse! Nice job!
Love the video, liked and subbed!
Like a shining stairway to heaven.. excellent!!!
2:02 Dude! I just spilt my coffee over my keyboard! :D
You referring to the wheelchair? Those are often used by low budget filmmakers in place of a dolly. Lock the front wheels and it will roll smooth and straight.
New to the world of 3d... Seems like the right channel!
I hope you enjoy! I try to make videos for experienced Makers, but I hope I can inspire you with some great project ideas.
@@ZackFreedman Absolutely fellow Zack! :P So many things to try out there.
Great video, really enjoyed that, preferred your voice over the computer voice though. Subbed, nice to see a small 3D printing channel growing, keep the videos coming.
That sounds like a robot voice, but it's actually Thomas the Train Heckler: ruclips.net/video/iTj0lcVSIVU/видео.html
i have only just found this channel and your rhetoric on the dremmel tool holder had me in tears (of laughter, not sad ones). I love the delivery of your quick fire commentary. looking forward to plunging in to your back catalogue for more techie or nerdy goodness
For RC hobbyist like me, that metric screw sizer saves a lot of annoyance and confusion.
Yeah, I went straight for that screw sizer myself.
Only problem is you need to calibrate the holes because PLA changes size on cooling!
@@GodzillaGoesGaga I printed mine in PLA, didn't see too much deformation upon cooling. The sizer works really well, and there are no issue trying to figure out the screw sizes. With that, all of my screw sizes are at least 2mm apart.
@@DargoDog Cool. Thanks for the info. Good to know. I've had tolerance issues when making threads so there definitely is some deviations from spec. It might be related to the volumetric size and on smaller dimensions is less significant ?
I badly needs the last one to organize my tools
Loved this! You have really good humor and the intro really surprised me. Reminds me a bit of the modern rouges (that is a huge compliment ;))
Thanks a lot! Glad you enjoyed the video.
it must be a joy asking you for directions, most animated person I've seen on the tube
Some of these will be very useful for me, thank you! I have a few lithium cells just laying around, so I'll definitely be putting them in an Altoids tin. I'm gonna have to give some thought to reorganizing my workspace after seeing that Altoids shelf!
Your reminder to subscribe actually got me to do so. Just saying so in case you ever feel like that call to action doesn't work. It does. 🙂
In the dremel part you had that "InfernoPlus - Hackerspace version" vibe
Engaging, startling, informative, witty, mad-cap, ... and then there's the video. :)
Wireless mice dont have lag anymore. As long as you’re buying a gaming grade mouse and not a cheap mouse
I just bought a G502 wireless after having a normal one for 2 years and I love that thing!
@AquaMortem Ima get a Wireless Model O
When he listed out why those batteries are terrifying I thought he was going to end with "so lets add some shrapnel!"
That was the slimmest tush I've ever seen.
So it would seem...
It took me a rewatch but I remembered exactly that "What are you" scene for the screw jigs.
Glad to see someone else is a fan of CR, specifically that episode where he covered the Ghostbusters RPG.
Watching video - “oh this is neat, maybe I’ll suscribe” scp reference - SMASH
You should read the subtitles, all the cussing is [REDACTED]
_Agreed._
_- O5-█_
It will never be as good as a gimbal, unless you are in a wheelchair - subscribed.
this guy is hilarious. Love it.
I don't have a printer nor I will but it's super entertaining to watch these videos... A few minutes to print- nineteen hours 🤣🤣🤣🤣
These are all really great projects. I have no doubt I would print them all if only I had a 3D printer.
200 bucks and you can have a good creality ender 3
Bro your prints are perfect