the VHT Night Shades can be installed properly and look amazing. I've don't it to my last 3 vehicles and got compliments all the time and it never faded or flaked.
@@MWARIS1 wet sand the lense w/2000 grit, make sure there no imperfections left on it. Spray light, even coats on it (depending how dark you would like to go). Now, once it dries its going to look matt and faded. to get a high polish i used Meguiars polishing compound, then hand wax. Turned out beautiful on my girlfriends car.
The reason that Jettas taillights look so bad is because the dude probably just sprayed the VHT on and then called it quits. I've tinted taillights with VHT and I've made them look amazing. My car has them tinted. It's not very hard. 1. Wet sand the taillights with 2000 grit. 2. Clean them off very well. 3. Apply 2 coats of VHT. 4. Apply 1 coat of clear coat. Gives it a dark, ALMOST vinyl look to it. All in all, get yourself some wrap. You'll save your taillights and it will look much better.
I did mine with red night shade on my old car. Cleaned them with alcohol, applied 3-4 light coats, 2-3 thicker coats (depending on what color / darkness you wanted), then did 4-6 coats of clear coat. They turned out awesome and still 2 years later (I know the new owner of the car) are holding up well and look oem. The Jetta looks like they sprayed 1-2 thick layers of night shades and called it a day.. looked like shit.
to make nightshade look like film, you have to polish it or wetsand and polish it. when you just spray it on there it ends up looking like plastidip. in this case it's installer error.
VHT nite shade looks great when you do it right. Seems like the owner put too many layers or didn't let the previous layer dry causing the unfinished matte look.
Be cautious with older lens. I tried removing the tent from my tail lights with brake cleaner. It removed tint no problem but made my tail light cracked really bad.
For anyone seeing this now, after cleaning it with the brake cleaner, clean it with alcohol to remove all residue, and go back over it with the RED VHT, looks great, and gets rid of the cracking and white film
A few drops of lacquer thinner on a rag. Wipes right off. As soon as its clean spray and wipe liberally with denatured alcohol. Perfect removal everytime. I suggest masking before using either product near the rubber trim or the paint
I used the VHT to do the taillights on my car and it came out pretty good but also I tried it on my head ligths and made them super dark so I'm going to try the break cleaner thanks for the video.
Same here! Just did it today. Rears looked great but headlamps super dark... What did you do to remove the vht. And what did you do to tint them again. Thanks
Yes brake parts cleaner works great but be carefull where ure spraying it because it also removes your tag sticker decal very fast as well. PS listen to me and my mishap lol
holy shit that dude who used the VHT night shade did absolutely no prep work. he thought it would work as is. you have to wet sand in between coats and finish it up by polishing it. I did it to my frs and spray can applications require a lot of work compared to proper spray gun applications. Don't knock VHT cause the dude used it wrong. you can clearly see his coats were uneven and heavy.
weird question but when youre tinting tail lights would it be better to take the tail lights out to tint them or keep them in? thinking about tinting the ones on my 97 jettas and its not too hard to take them out
I know this is a late reply but do you have any tips to take off VHT Nightshade overspray from the car itself? i got some on the outside of the taillights on the car.
i wanna buy your products but shipping is so expensive to australia no matter what i buy your website charges me $40us even if i order a sticker i want to get the wrx tail light wraps and other things can't you charge by product or weight
Bigjoe 6618 not many uploads yet but we're working on tons of content for the new channel - subscribe here ruclips.net/channel/UCh1rNf-JYMDjOqMT1EgJb_A
Best way to spray on vht is Clean the taillights Spray 3 coats of vht wait till it drys Sand it with 1000 grit Spray it again with vht Clear coat it Sand it with 2000 Clear coat again Polish it with some compound Looks clean no Peel and has a mirror finish none of that dull bs
FUTURE TIP: Nightshade, with some nail polish remover or acetone will take it off in seconds just like he said tho mask off as much as you can avoid your paint. hopefully save I time
Love the vids keep on going! Names: Premium Tips, Premium Wrap IT, Premium Wrap At Home, PASchool... Would be awesome if you showed us more in detail how to wrap the front bumper of an ordinary car (Bmw 3 series etc.)
I'd rather get a black housing so the visibility doesn't get affected at all. I mean I know he said it doesn't, but I've seen em in person and it does on some cars.
@3:38 is where the tutorial starts
Not all heros wear capes
the guy we all love
MVP
I used goof off worked really well and quick.
Does it leave a nice clear lense? I want to do some headlights that I bought. I'm afraid anything I do will ruin the clear lense
@@stevesfatbikeadventures4698 yes it was perfect. If any issue lemon and baking soda helps make it clear again
the VHT Night Shades can be installed properly and look amazing.
I've don't it to my last 3 vehicles and got compliments all the time and it never faded or flaked.
Any tips on how to make final product look glossier ? I've seen like 10 different video and they all look bit weird after few coats
@@MWARIS1 wet sand the lense w/2000 grit, make sure there no imperfections left on it. Spray light, even coats on it (depending how dark you would like to go). Now, once it dries its going to look matt and faded. to get a high polish i used Meguiars polishing compound, then hand wax. Turned out beautiful on my girlfriends car.
Lucas Goldman I didn’t use clearcoat or nothing ?
What if u mess up and it runs any ideas on how to fix this? Asking for a friend
mine lasts a while but it does fade after a bit
The reason that Jettas taillights look so bad is because the dude probably just sprayed the VHT on and then called it quits. I've tinted taillights with VHT and I've made them look amazing. My car has them tinted. It's not very hard.
1. Wet sand the taillights with 2000 grit.
2. Clean them off very well.
3. Apply 2 coats of VHT.
4. Apply 1 coat of clear coat.
Gives it a dark, ALMOST vinyl look to it.
All in all, get yourself some wrap. You'll save your taillights and it will look much better.
scottis Why do all that work over just installing a vinyl tint?
Next time, read what I say before you comment bud.
"All in all, get yourself some wrap. You'll save your taillights and it will look much better."
I did mine with red night shade on my old car. Cleaned them with alcohol, applied 3-4 light coats, 2-3 thicker coats (depending on what color / darkness you wanted), then did 4-6 coats of clear coat. They turned out awesome and still 2 years later (I know the new owner of the car) are holding up well and look oem.
The Jetta looks like they sprayed 1-2 thick layers of night shades and called it a day.. looked like shit.
Are you sad?
Nah mate you just can't read.
to make nightshade look like film, you have to polish it or wetsand and polish it. when you just spray it on there it ends up looking like plastidip. in this case it's installer error.
VHT nite shade looks great when you do it right. Seems like the owner put too many layers or didn't let the previous layer dry causing the unfinished matte look.
Be cautious with older lens. I tried removing the tent from my tail lights with brake cleaner. It removed tint no problem but made my tail light cracked really bad.
Same here. My tail light looks ugly and a white film over it
For anyone seeing this now, after cleaning it with the brake cleaner, clean it with alcohol to remove all residue, and go back over it with the RED VHT, looks great, and gets rid of the cracking and white film
A few drops of lacquer thinner on a rag. Wipes right off. As soon as its clean spray and wipe liberally with denatured alcohol. Perfect removal everytime. I suggest masking before using either product near the rubber trim or the paint
I used the VHT to do the taillights on my car and it came out pretty good but also I tried it on my head ligths and made them super dark so I'm going to try the break cleaner thanks for the video.
Same here! Just did it today. Rears looked great but headlamps super dark... What did you do to remove the vht. And what did you do to tint them again. Thanks
Did this work on your headlights? I bought some and want to make them clear, I'm worried about destroying the clear look
tried tinting my taillights but i couldnt get the creases out and using heat on it only made it worse. any tips?
School of wrap
Yes brake parts cleaner works great but be carefull where ure spraying it because it also removes your tag sticker decal very fast as well. PS listen to me and my mishap lol
I'm not sure if mine has the spray paint type tint or the vinyl. Just in case, can you tell me how to get the vinyl off, too?
Any brake cleaner works or that specific can does the job?
Will this work with just a regular spray tint? Just bought a Lexus and they spray tinted the tail lights red I’m assuming it does
Can i know the material you are using for headlight tint? It is oracal?
Hey Daniel how about "Premium University"?
holy shit that dude who used the VHT night shade did absolutely no prep work. he thought it would work as is. you have to wet sand in between coats and finish it up by polishing it. I did it to my frs and spray can applications require a lot of work compared to proper spray gun applications. Don't knock VHT cause the dude used it wrong. you can clearly see his coats were uneven and heavy.
weird question but when youre tinting tail lights would it be better to take the tail lights out to tint them or keep them in? thinking about tinting the ones on my 97 jettas and its not too hard to take them out
Any tips for wrapping interior?
Surprised no packages flew off the back of the truck lol
Literally the only thing I could think about the rest of the video. Wow! Impressive
How do I remove that old tint you just put in the Vw Jetta,
How can you easily take off the second tints you put on?
Any idea on How much does it cost to tint the taillights on a ‘14 camaro 2ss
Wats the name of the product. U used to removed the nightshade
How much would it costs me for u guys to fix led on my tail lights
Tinted my tail lights before with a spray, looked terrible so I used brake cleaner to remove kit but it made my tail lights start to crack
What did u use to remove the paint ?
What did u use to remove the tint spray bud?
Did you also use a clear coat on these before removing?
What color wrap is that @ 3:28 ??
I love the yellow stickers over the oem spoiler holes. SMFH
What about Premium Auto Wrapping or Premium Wrapping ?
Do you have pre cut red out kits for tail lights? I see the black out for the FRS on the site but no all red
Chlorinated or non-chlorinated brake cleaner?
What brand(do you have the link) of wrap did you use?
I know this is a late reply but do you have any tips to take off VHT Nightshade overspray from the car itself? i got some on the outside of the taillights on the car.
Try using a little bit of isopropyl alcohol, I would also recommend buying a clay bar kit and waxing the area after it’s been wiped down with alcohol
@@PremiumAutoStyling Thanks i’ll trynit
try it*
I want to do this on my gen2 tsx but it has a knarly curve on it. Any tips
i wanna buy your products but shipping is so expensive to australia no matter what i buy your website charges me $40us even if i order a sticker i want to get the wrx tail light wraps and other things can't you charge by product or weight
The night shade was applied wrong. I did it to a 2015 Jeep Grand Cherokee and it looks great
What is the name of that paint remover
i have try and it's doesn't work rubbed like crazy jetta 2009
Premium Wrap University? And call it P triple u for short?
I have a heavy cloudiness. None of this is working. I'm pissed
PremiumKnowledge - Also what Application tape do you use?
Premium.Wrap.Creations ?
What percent tint film is that ?
Is the second channel up yet? If so what's the name?
Bigjoe 6618 not many uploads yet but we're working on tons of content for the new channel - subscribe here
ruclips.net/channel/UCh1rNf-JYMDjOqMT1EgJb_A
How would I remove vht from car paint, I accidentally got some on the paint and can’t figure out how to remove it. I really need help
Did you figure it out,barely got the same problem
Juan_A999 I haven’t yet, still working on it. If you found a way please, anything helps
How Much Tint Percent Was That?
how much light do you lose wrapping headlights with tint.
Lothurin alot! I tented my challenger. looks amazing but at night...Damn
What year of that jetta
You should name the new channel. Wrap school by Premium.
New roll wrap is going on Anthony's or Mitche"s car
Love how it says how to remove tints then they just do random shit fro most of the vid that has nun to do with that
wrap class?
yall should try making a un-wrapping video cheers
Best way to spray on vht is
Clean the taillights
Spray 3 coats of vht wait till it drys
Sand it with 1000 grit
Spray it again with vht
Clear coat it
Sand it with 2000
Clear coat again
Polish it with some compound
Looks clean no Peel and has a mirror finish none of that dull bs
FUTURE TIP: Nightshade, with some nail polish remover or acetone will take it off in seconds just like he said tho mask off as much as you can avoid your paint. hopefully save I time
Thought this video was on removing tint
If I had enough money I would ship my car over to you guys to be worked on.
FirefoxPL that's so awesome for you to say that! We actually have multiple cars getting shipped in for work this summer ✌🏼. Thanks for the support.
You should try for your second channel "Premium Tour"
Premium Auto Schooling
Premium Tutorials
......
Freemium Auto Styling
cuz the tips are free
Tint for honda civic coupe 2016
School of Premium wraps
premium school of wrapping?
i would like to se a Agera R - Koenigsegg In your shop some day :)
lmao that bottle of henny just chilling on the shelf
What happen to el jefe???
I tried the "No I'm Kidding!" discount code and its not working.
Sand , nightshade , sand , ckearcoat , sand , polish . Smooth as glass and looks way way better than vinyl film .
How about Premium Knowledge for the channel name?
Brake cleaner only works for some lights. it can eat the plastic on certain manufactured lights
Love the videos guys, keep dishing them out!
Learning to Wrap Premium Style
Would you guys reduce the price if we come from Northern California and want to get my vehicle wrapped in your shop?
oZerqa yea they can do it for free...considering ur already paying for gas🤔
Michael Palacios the wrap for free really? Or is that an exaggeration
Premium wrap squad
Bro I love all the videos. You guys are awesome. Keep doing what you're doing!
A 10 minute video for something that should be explained in under 3
This hella helped me! Thank you for your video, this was really informative.
bet that wrap going on Mitch's 370
Love the vids keep on going! Names: Premium Tips, Premium Wrap IT, Premium Wrap At Home, PASchool... Would be awesome if you showed us more in detail how to wrap the front bumper of an ordinary car (Bmw 3 series etc.)
In British Columbia Canada. The cops pulled me over and have given me 15 days to get the night shade off my taillights. Choked
Just casually having a bottle of Hennessy in the office lmao!!!
I'd rather get a black housing so the visibility doesn't get affected at all. I mean I know he said it doesn't, but I've seen em in person and it does on some cars.
Simplified Premium or Simply Premium. Idk something that shows how to make a wrap job easier.
That days come closer and closer lol
You guys should have a Netflix Series.
Premium Wrap Class. Or just Premium Class 👍🏽👍🏽👍🏽
Wrapology?
The wraps going on Anthony's car !!
Samuel Lopez I think Mitch's car
Idk if anyone noticed but he keeper saying "uhhm" Soo many damn times lmao
Notification squad🔥🙋🏾♂️
Ultra premium (new channel)
The music is way louder than the actual speech. I keep having to turn my volume up and down. Please work on this.
every other vid I've seen says brake cleaner ends up fucking the plastic up in the long run, it will turn white and foggy.
premium tutorials
simple and dope!
This whole time i was watching your videos and i wasnt even subbed . But i am now hahaha
Should have kept the taillights red. In my opinion it looks better on the darker colour cars. Also that wrap out the box, my guess is the frs
How to un-rice your car, then reapply more rice.