Power of the Okuma Control Full Webinar - Game-Changing Technologies Presented by Hartwig
HTML-код
- Опубликовано: 8 сен 2024
- Today we are discussing the Power of the Okuma Control and why it's a game-changer for your shop! Join Okuma America's Brad Klippstein and Wade Anderson as well as Hartwig Application Engineer Ricky Hochecker as they discuss OSP development history, its Windows-based open architecture design and many of the features that it has!
Join us for a rebroadcast of "Power of the Okuma Control". This webinar was broadcast on 8/20/2020.
George from Qualfab, bought my first Okuma in 1986. I just ordered my 9th Okuma. I knew the control was for me when I programed a parabolic curve on my first lathe with about 5 lines of code to rough and finish the curve in 1986.
That's amazing! I wish I had known about the Okuma control options 20 years ago.
I'm late to the party, and have learned so much from this video. Ironically, I've been considering DMG MORI and other popular brands for a new mill/turn, yet never knew anything about Okuma. The control is the heart of the machine. There are millions of people who do not know anything about the Okuma advantages.
I’ve operated primarily mori’s most of my short career, just now getting introduced to fadals and okumas. Definitely different, Mazaks are a little different too, Haas has its own thing. I like Mori but it’s probably bc that’s what I grew up on
Thank you for doing this it assist me make the right choices on CNC machines.
Regards LeRoy
Thanks for watching! Let us know if you have any questions
@@HartwigInc what did you guys substitute IGF for?
@@fredrezfield1629 Sodick
Regarding load limit per tool, is that available on the OSP300M control for M560v's?
Cómo se habilita el Bit 39 en un OKUMA MULTUS B400II?
Where can I go to learn how to operate a okuma controlled machine
So good
*DO YOU HAVE THE OPERATION MANUAL FOR THE OSP-P300S CONTROL IN SPANISH? THANK YOU*
e-mail us at info@hartwiginc.com!
Hola Emiliano, te dieron alguna respuesta del tema del manual. yo tambien trabajo con okuma en el laburo y los manuales del control osp no estan por ningun lado!
how to control rapid without single block control please clear my doubt
shoot us an e-mail at info@hartwiginc.com
There are three rotating knobs. Leftmost will allow you to adjust rapids from 0% to 100%. I like to test new tasks with single block and 5-30% rapids. When all looks good i drop single block and eventually adjust rapids to around 75-100%.
Hi there, i need your support to help me upgrade my okuma simulturn 300 from win XP to Win 10. Can you help
im looking for the software so i can test out programs for errors and crashed before they go out to machine. can you help me get ahold of that software?
hey Matthew shoot us an e-mail to info@hartwiginc.com
Anyone have a good helical program
I would like some help to learn CNC programming GRINDER OKUMA PLEASE
please e-mail info@hartwiginc.com and we can put you into contact with someone who can help!
большие файлы окума не корректирует. Бывает, что файлы не читает, ругаясь на недостаток буфера памяти...
в-общем не лучшее решение...
День добрый. Подскажи пожалуйста если в курсе. Графическая симуляция на Okuma OSP7000L Есть ли она И как перейти в режим симуляции. Мануала на русском нет. Переводим потихоньку.
нужно в автомате нажать кнопки, как в видео:
ruclips.net/video/Yy6wB7KmODE/видео.html
и затем выбрать на экране 3d рисование или как-то так и нажимаете зеленую кнопку NC Start
@@pozalujstapodpishus3062 Спасибо попробую.
Are the apps available for purchasers of used P series machines also or just those one owner buyers?
Apps should be available to whomever is currently using the machine