These video were great, some soft keys are a little different than mine and some don't exist at all, but between TOOL GRAPHICS and REGISTER AND ATTACH TOOLS FOR GRAPHICS, I think I got it. Only thing it doesn't show is how do you unregister a tool?
Rarely do you need to remove a tool from the library, but if you do: Make sure the tool is not mounted, then from the TOL DATA tab, arrow over to TOOL DELETE. If it can't be deleted, double check that it isn't hiding on your turret somewhere
Hey, it was nice informatics video, Can you please make a video fro Work and Tool offset setting video for newly installed machine,. As i am not able to do work and tools setting for my okuma geneos
@@pocketcharleywithgosiger I would like to see that as well for a turning center. Detail of registering of tools, attach / detach, offsets, edges, difference between drawing tools and using the tool type select. THANKS
Nikolaj, yes. They call them ADMAC codes, and they allow material definition in the header of the program. On older controls, you could also set tool shape via ADMAC codes
@@pocketcharleywithgosiger Hello: where can I get the OPERATIONAL manual for the OSP-P300S Control IN SPANISH? Thanks (Hola: dónde puedo conseguir el manuel de OPERACIONEL el Control OSP-P300S EN ESPAÑOL? Gracias)
i operate lb2000 and lb3000 exii space turn and no one knows how to use miling in lb3000. im trying to improve to "show off" in my company but is hard to find
Because of this video, you got a subscriber. Thank you
Music to my ears! Happy to help
Thank you so much, god bless you
These video were great, some soft keys are a little different than mine and some don't exist at all, but between TOOL GRAPHICS and REGISTER AND ATTACH TOOLS FOR GRAPHICS, I think I got it. Only thing it doesn't show is how do you unregister a tool?
Rarely do you need to remove a tool from the library, but if you do: Make sure the tool is not mounted, then from the TOL DATA tab, arrow over to TOOL DELETE. If it can't be deleted, double check that it isn't hiding on your turret somewhere
Hey, it was nice informatics video,
Can you please make a video fro Work and Tool offset setting video for newly installed machine,.
As i am not able to do work and tools setting for my okuma geneos
I'm assuming you are meaning for a turning center?
@@pocketcharleywithgosiger I would like to see that as well for a turning center. Detail of registering of tools, attach / detach, offsets, edges, difference between drawing tools and using the tool type select. THANKS
How to make reference tool in okuma lathe in p300?
I wish you guys serviced our area our Okuma reps are trash.
Well THATS not good to hear! Are you referring to service techs or technical advice?
Can you give me the Okuma OSP-P300 manual for milling ? I search it on the Google but I found manual for turning
jesus i need that so much to, im searching for tryinng to make some work miling but i cant find
Is it possible to set stocksize/length at the start of a program?
Nikolaj, yes. They call them ADMAC codes, and they allow material definition in the header of the program. On older controls, you could also set tool shape via ADMAC codes
*Cómo se hace esto pero en el CONTROL OSP-P300S ?????? Gracias*
*How is this done but in the CONTROL OSP-P300S ?????? Thanks*
El control del P300s no tiene un atajo como el que tiene el L. Deberá registrar el gráfico como este video: ruclips.net/video/tp_2tjfxalk/видео.html
@@pocketcharleywithgosiger
Muchas gracias!
Very thanks
@@pocketcharleywithgosiger Hello: where can I get the OPERATIONAL manual for the OSP-P300S Control IN SPANISH? Thanks
(Hola: dónde puedo conseguir el manuel de OPERACIONEL el Control OSP-P300S EN ESPAÑOL? Gracias)
How to go on that window? My Okuma LU45 P300LA machine not appear that window? Thanks
Do you have EasyOp turned on? If you don't, try F8 (DISPLAY CHANGE), then EASYOP ON
i need the simulator okuma osp p300l.. im operator okuma genos L2000
I need simulator too; please danhresume@gmail.com
i operate lb2000 and lb3000 exii space turn and no one knows how to use miling in lb3000. im trying to improve to "show off" in my company but is hard to find
i want this software; anyone know how to get it please
The simulator is called PCNC Master and is only available from your Okuma distributor. Fully functional simulator!