I have Marklin HO since 1959. I paid to have all my locos converted to digital - whole new world (but a little expensive!), with new C track, but digital operation is way better.
Just picked up a used Marklin ICE digital starter set, my first Marklin train. I really appreciate your video as it gave me some great info on Marklin trains.
Hi Nendra, model train is a Great hobby I can highly recommend it. However, do look around to see what brand and type of trains you would like to have. I can recommend Märklin but there are also others around. Welcome to the hobby and have fun! Enjoy ;-) Bo
@@ModelTrainFun Yes, it's relatively popular here, HO is the favorite scale but there are also people in N and Z scale. Thank you again for the English videos ! :)
Hi Evandra, I am glad you like the channel. One thing to note is that if your grandpa's Märklin is older, then it is most likely analogue. My tutorials are for the newer digital Märklin, so you might have to also look around for other channels. Have fun and enjoy your trains ;-)
I just ordered a digital start set (no locomotive or rolling stock) its just the mobile station, track, etc. And I ordered the Orange edition BR 52. so now I have to set up the entire thing. I run legacy and TMCC with my o scale trains, and DCS with my ho scale trains, but Marklin.....this is a whole new ball park! looks like I'll be teaching my son how to set up new consists and Marklin locomotives when we get more later on down the road.
Hi - sounds like a great start with Märklin digital - I hope you have fun with it. I have not seen the BR52 orange edition before. Looks like an interesting locomotive. As far as I can see it is a delta version, so an older/cheaper version of the the Märklin digital. Unfortunately, it means it will have less functions and no sound. It is made by Märklin in 1996 as a special MHI model. Looks awesome! Hope you and your son will have fun with Märklin. Enjoy ;-)
I also checked history and particulars of this T12 locomotive. Very interesting and long service. I think , for begining of 20 - century this was art of engineering and also operators and mechanics must be strong and well trained to operate this kind machinery. I am marine engineer , have expierence with steam boilers. Some times boilers are danger.
Hi Arturs, yes this is a very popular locomotive and I believe it also was produce in large numbers. Indeed steam boilers are dangerous and there have been cases throughout time with exploded locomotive boilers. If you join a club restoring locomotives perhaps you could play with a locomotive boiler? Enjoy ;-)
Looks great. I also have a Marklin starter set with the same locomotive but with only two traincars (one was a oiltank thingy and the other a flat car). It did come with a switch tho, wich is very good. It also came with a remote instead of a controller, wich allowed 4 trains to run on a layout.
Sounds like a nice little setup. I believe the remote is a very simple controller that only allows you to use 4 pre-configured addresses. I have never tried it - how well does it work? Enjoy ;-)
@@ModelTrainFun I couldnt really test the remote since i only have a single train in my collection right now (im still a beginner and just starting to get into modeltrains), the one included in the starterset, so i cant tell you what its like to run multiple locomotives with the remote. It worked good with the single loco tho. I hope i'll be able to test it out after a i get a second loco.
@@shaggygabe728 As a hint I suspect that if you get a new locomotive it has to be programmed to one of the 4 addresses supported by the controller (check the maual). Unfortunately I do not believe you can program addresses with the controller. So if you buy a new locomotive ask the shop to set the address for you (make sure it is not the address of the locomotive you already have - check manual). Note: If it is a locomotive with a dip switch you can change it yourself - however, the modern locomotive decoders usually do not have this. Enjoy and have fun with trains ;-)
@ShaggyGabe I think I saw a notification about locomotive or track being dirty? However, I cannot see the comment on this video? I would recommend the following videos from @MarklinofSweden ruclips.net/video/0olM5Zq1zlY/видео.html and ruclips.net/video/41Cts-OvNHs/видео.html
Very helpful thank you. I have just bought a sound equipped three rail locomotive (by mistake) so rather than return it to Germany, I thought I'd experiment with 3 rail.
Hi, glad you liked the video. Indeed the 3 rail Märklin does not run on 2 rail. It can be converted to a 2 rail, but it is often not easy. Have fun with trains! Enjoy ;-) Bo
I really like your presentations. They are very honest and real. You are doing a great job. May I offer a little correction with your English? "Track" (singular) is used more often than "Tracks" (plural) in English. I don't know how it compares to Gleis/Gleise auf Deutsch . You buy "track" from Märklin, not "tracks". In the box are pieces of "track" (singular). You put together pieces of "track" (singular). We say "pieces of track" rather than "tracks". The road across the rails is a "track crossing", again, singular. However, a completed set of rails, like two lines running down the set, or in the country, would then be referred to as "Tracks" ("Hans is on the other side of the tracks." meaning there is more than one rail line, you are on side, and Hans is on the other. For model RR, you buy pieces of track, put the track together, screw the track down, etc., etc. all using the singular. That said, if I German were 1/4 as good as your English, I would be thrilled. I hope my unsolicited advice is not taken rudely. This will make your presentations even better. Keep up the great work!!
Thanks - glad you enjoyed it. Got it - track not tracks. Unfortunately you will find this mistake in many of my videos - will try to remember this in future videos. Enjoy and have fun!
Hi Ray, agreed that it would be nice with sound on this model. Often manufactors but cheaper versions in the starter sete to make them affordable. However, you can also find this locomotive from Märklin with sound and you can find bigger starter sets that have locomotive with sounds as well. Enjoy ;-) Bo
Hello, I’m new to Märklin C-Track HO DCC. The controller in my setup is green but everything else is the same. I did buy an extension set that included DCC switching, but I am having a lot of trouble getting to grips with the instructions on the controller on registration of a point motor to the controller. I don’t understand when I press ‘shift+spanner points’ buttons that the display shows two sets of numbers i.e. 1/2 or 2/3 etc, nor can I workout am I to press the buttons on the left hand side buttons or right hand side buttons. If you have a video already done would you please advise on where to find it. I don’t have the ‘3 rail system’ just the 2 rail C-Track. Yours truly, ross
Hi Ross, The MS2 with the green button is the same as the MS2 with the red button - just a different color. Everything else is the same with the exception that the green is by default set to DCC (instead of MM) for locomotives and accessories. When you are talking about 2-rail C-track I assume that you mean the Trix C-track? Using the MS2 and the Trix C-track you can benefit from many of the videos on this channel if you keep in mind you are using 2-rail instead of 3-rail e.g. same turnout decoders, turnout mechanisms and same way to operate the MS2. For the MS2 you can use MFX for modern Trix locomotives and will have to use DCC for locomotives of other brands. When you click on the Turnout button you will see "Keyboard 1: 1/2". This indicates you see two accessory addresses at the same time: address 1 to the left and address 2 to the right. You can have a turnout on each address or e.g. a 4-way signal that covers two addresses. Check out here to see how it works: ruclips.net/video/SaOI8KMl3vM/видео.html Tip: check out the following playlists on this channel to see more useful videos: - Märklin Beginner: ruclips.net/p/PLYAhs-Pox3sG31NwCfqIuk6IvI19q2czn - Mobile Station 2 (MS2): ruclips.net/p/PLYAhs-Pox3sFts7dGFLb77e16yIodgG59 Hope this helps. Welcome to the channel. Enjoy ;-)
As far as I know it is not easy to add sound and smoke. To add this you would need a new decoder and I am unsure if a smoke unit fits inside the locomotive. Enjoy ;-)
Hello from Germany. Great video. It´s really very good how you explain the märklin system. Have fun with it. You have my "like" and "Abo". And a "Yipieh!" too 🙆♂
Hi, great info and thanks for the input! The turtle mode indeed makes it easier to maneuver. As you mention it gives direct control of the acceleration/braking. Enjoy ;-) Bo
Currently, I live in a hotel - so I prefer a temporary layout. I have however an intension of making at least the skeleton for a layout. To be honest I have never had space for a permanent layout, but always dreamed about having one... one day. I briefly showed the 3D view of the track diagram I intend to make on the table (one day) in the 1010 subscribers video. ...one day... Enjoy ;-)
The controller can also work as a DCC controller (even the locomotive can, but not on regular track/2-rail). The track and locomotive are 3-rail and are not compatible with 2-rail. You can find the same digital starter set as 2-rail/DCC with the same controller with Trix. Check out Trix 21528: www.trix.de/en/products/details/article/21528 Enjoy ;-)
To get started with the Central Station you need a CS3 and a power supply. You can re-use track, accessories, locomotives and freight car. The MS2 can be plugged into the CS3 as an extra controller. The power supply from most starter set can be used for when you want to connect a L88. The only item you cannot re-use is the connector box. You can see how to get started with the CS3 in this video: ruclips.net/video/wANbrR0fdJk/видео.html Enjoy ;-)
LOL - agreed. I have trains from multiple countries (and era's) as well. Some like everything strictly fitting together and others (like me) just like any train ;-) Happy modelling!
Hi David, I like Märklin and the accessories - everything fits together. However, do remember that Märklin is a special 3-rail system and it can be hard to find rolling stock that is not European (with focus on Germany, Austria and Switzerland). Enjoy ;-) Bo
I ordered the set shown. The track will be different from what I am use to (Bachmann EZ Track). But I look forward to having some respectability sized equipment at a better price point than MOST American counter parts.
@@ModelTrainFun An update, I'd be lying if I said anything other than I love them. The tracks operate better than EZ-track, and the cars a so small I can fit them in my hand. Perfect for what I want to do. I got a 4ft x 8ft (1.2m x 2.4m) table I was gonna use for modeling one of the many North American Roads I liked as a kid that I can now use for these trains. I plan on ordering the C1-C5 track extensions, 3 more freight cars, 2 or 3 coaches, AND another engine over time before I build my layout proper. I was gonna do something agricultural themed with my American trains years ago, now I think I will do something mountainous, in the late-summer early fall shortly after the end of WW2 on both theaters (1946-50). Geographically, I have no idea as to where exactly, except for two key ideas, a junction village, and in the Western Block. That's all that I need to really have fun, a basic idea; a foundation in which to tell a story, unlike the geographically locked basement empires here in the US...no fun, no humor, and to fragile.
@@BattleshipOrionI am glad you like it and hope you will have lots of fun making a layout. I like the mountains and making a spaghetti layout with trains entering/leaving tunnels in many levels. However, this is also challenging to make so everything looks natural and works reliably. Perhaps one thing to remember is that Märklin do not make many US models and the US model manufactors do not produce locomotives for Märklin 3-rail. However, there is also a 2-rail Trix version. Enjoy your trains ;-) Bo
Hi Kaptajn, There are several sets you can use for extension. Some sets have trains and tracks while others only have tracks. The starter set should also have included some brochures with ideas. For C-track extension packs you have the Märklin 24902-5. You can get inspiration in the C-track expansion plans brochure: www.maerklin.de/fileadmin/media/service/faq/Brosch%C3%BCre_C-Gleis_Gleispl%C3%A4ne_Erg%C3%A4nzungspackungen.pdf On this channel check out Märklin Beginner playlist: ruclips.net/p/PLYAhs-Pox3sG31NwCfqIuk6IvI19q2czn Episode 2 more tracks and trains: ruclips.net/video/IR6udIoRJso/видео.html ...and the video on the Märklin track geometry (Episode 3): ruclips.net/video/RhrK0ylf9eg/видео.html Have fun with trains! Enjoy ;-)
The frogs are powered. However, this is less important on a 3-rail system like Märklin. On 2-rail systems the challenge is that you need both rails. On Märklin where you have the 3rd center rail you just need one of the rails... Enjoy ;-)
@@ModelTrainFun Thank U very much for the answer! :) Your vids have convinced me that the Marklin system is quite easy to build up and of high quality. I must build a Marklin layout! :) Good luck!
I have a question, i have some vintage marklin trains, including a set that i found out was 2975, and bunch of other railroads and locomotives, can you please tell me, if you know, which year this set was produced, and what it may cost today?
I have no idea - I don't know much about vintage Märklin. Try one of the Märklin groups on Facebook. They might be able to help you. A vintage Märklin group: facebook.com/groups/923744951425309/ that might help. Best of luck and enjoy the vintage Märklin ;-)
Hi Kuno, I am using a NOCH Grass Mat - specifically "Summer Meadow" (00012). You can find it here: www.noch.com/en/grasmatte-sommerwiese-200-x-100-cm.html Enjoy ;-)
Hi - welcome to the channel. Check out the Marklin store locator www.maerklin.de/en/service/store-locator. I see one store in India. Otherwise consider ordering from either USA or Germany. German store will probably have lower prices. The ones I usually look for in Germany are: - www.haertle.de - www.modellbahnshop-lippe.com - www.modellbahn-kramm.com The last two looks like they also ships to India. But look around - many stores to choose from. You are not the first from India to ask, so please let us know if you have success. Always good to share experiences with fellow model railroaders. Enjoy ;-)
Hi David, I like Märklin and it is a great product! There is a full range of accessoires where everything works well together. Do remember however, that this is a 3-rail system where most other brands makes 2-rail. This means that locomotive running on the Märklin tracks must have an extra slider underneath. I like that but it means that e.g. American locomotives are rare - many German and European. Märklin is one of the most selling in Europe. Hope this helps! Enjoy ;-) Bo
Hi John, yes - the Trix MS2 is the same as the Märklin one. Only difference is a Green button and it comes by default set for DCC. You can see what MS2 items are compatible and what fits together in this video: ruclips.net/video/6hX2JxWqQeM/видео.html Enjoy ;-)
Hi Arturs, To me I enjoy having multiple trains. So I would buy tracks so I can make a 2-track main line (double) loop. This means buying some 24230 curves and more matching straight track (same amount as you already have in the starter set. Furthermore, I would make a cross over between the two tracks. You can do this in two ways. Buy two of the same curved turnout (either 24671 or 24672). Or buy two of the same normal turnout (either 24611 or 24612). You can also consider having a siding using one each of normal turnout with two 24224 curves and a few straight. Finally, get one more locomotive and some cars. Perhaps a passenger train? Hope this helps! Enjoy ;-)
@Christian XI - I accidentially deleted your comment on this video. It started with "Christian XI replied: "Model Train Fun Thanks for taking your time to answer my question. I will check out the videos. I've had the set for less than a week so I'm a little surprised that maintenance of the loco (and" - sorry If your locomotive truly is lees than a week old, then it sounds suspecious. If the track and locomotive is brand new, then you shold consider contacting the Märklin dealer where you purchased it. If it is used it is another matter as you do not know how long it has been used previously. Either way I would consider giving it a good clean.
Hi Milton, Sorry for the late answer. Did you figure out how to make it work? Otherwise, a couple of hints: You can try to delete the locomotive from the MS2 and re-register. If this does not work. Try with the locomotive alone on the track and use the "Find" under locomotives. If this does not work - often unfortunately a reset of the MS2 might be needed. Did this help? Enjoy ;-) Bo
I have a question, hope you can help. I have quite a few train engines (high speed models, (steam) locomotives, etc.), that belonged to my dad and grandfather. They've passed away a few years ago, but because of all the fond memories, I just couldn't part with them. So I've recently decided to restart the hobby. However, some models are over 30 or 20 yrs old. Would they all work with this set, or is some adjustment required?
20-30 years old? Are they Marklin locomotives or another brand? There is a good chance they are analogue. Take a look at the boxes of the locomotives. Back then the boxes for analogue Marklin locomotives were typically white and the boxes for digital Marklin locomotives were grey. You can also check if there is printed Marklin Digital, FX or MFX on the boxes. Marklin digital locomotives will work with the mobile station while the analogue will not. Analogue locomotives can be changed to digital - however, this can be a difficult and expensive operation. Many choose to stay with analogue for this reason. Note: modern digital locomotives can run on an analogue layout (although with reduced functionality). If you have a model train shop shop near you try to ask them. Note: as you did not state it - it might not even be Marklin brand locomotives? You can recognize a Marklin locomotive by the slider it has underneath for the "3rd rail".
@@bo666dom I don't recall Jouef making AC trains so be careful because if you put the DC Jouef on the AC track it will burn the motor even if u don't run it! Marklin is 16 Volts AC and Jouef is 12 Volts DC.
Thanks for the nice video! I have one question. I recently bought the Märklin starter set 29074 and I noticed a problem in the operation. When the loco goes in slow speed over some of the curved tracks there is a small hesitation, like it stops and goes again. Do you know any possible cause for this?
Glad you liked the video and welcome to the hobby with your Märklin 29074 :-) Regarding the issue you describe: my best guess is that you need to clean the tracks and/or the locomotive wheels. After a while the tracks and the locomotive gets dirty. In this case the power is not transferred effectively from the tracks to the locomotive. A typical indicator of cleaning needed is that you see the light flicker or very very shortly go out at low speed. When it gets more dirty you cannot drive slow. On very dirty tracks the locomotive just stops. I suggest you start with the tracks. To clean the tracks first try to gently rub the tracks with a piece of cloth. Check if dirt rubs off. I use Märklin smoke fluid to clean the tracks. Consider a cleaning car such as Märklin 46049 to keep tracks clean. You essentially do the same with the locomotive wheels. Start by visually checking the wheels. However, everybody has their own way of cleaning. Ask around, ask your local model train shop and find your preferred method. I hope this helps. Note: if I have not run my trains for a while tracks might be dirty and need cleaning. Often it is enough just to drive the trains... Enjoy :-)
I had the same problem around some curved tracks with my new 29074 set. It only happened with the tender lok BR 74 when running at slow speed but not my Mallet BR 53.
@@arturspipins7385 I believe it i mostly likely track cleaning or wheel cleaning that is required. You could have run the locomotive so much that the slider is damaged or needs replacement. Here you can see how I prepare my layout for running: ruclips.net/video/Yke1Akvh0Ds/видео.html Hope this helps. Enjoy ;-)
Thank you so much for the video. I am a beginner. I have a Fleischmann HO Lufthansa Express locomotive ( 4378) which I bought new about 20 years ago. I only sometimes used it for display. After the Pandemic began, I noticed that under the front part of the locomotive, there is a small round metal button. Can you tell me what track & power supply I would need to get it moving? I bought it in Japan and the store has since closed. As far as I know, the loco has no sound and is not DCC. I am in still in Japan.
Hi Hunter, Sounds like a nice vintage Fleischmann locomotive. Unfortunately, I do not have much experience with analogue locomotives. Did a quick search on the internet. You can find the manual here listed as a DC locomotive: www.fleischmann-ho.nl/downloads/detailoverzichten/electrischelocomotieven/4378-1994.pdf From the manual I do not see the round metal button you are describing... A guess is that it is for switching pickup of power between track and catenary - however, this is a guess from my side. If you have not used it for 20 years, there is a good chance it might need some maintenance before being able to move. As this is a DC locomotive it needs normal 2-rail tracks you can get this from almost any brand that has H0-gauge track (except Märklin). This could be Roco, PIKO Trix, PECO, and so on. My guess is that this was the power supply one would originally buy for it: www.fleischmann.de/fen/products/control/analog-control-devices/6735-msf-controller-transformer.html I might be wrong as I am not familiar with vintage Fleischmann. However, the one shown supports 14 V DC, so an analogue model train transformer that supports 14V DC would be the choice. Again - I could be wrong. A group that I would suggest you could ask is: www.tapatalk.com/groups/germanrailfr/ Also try searching on RUclips for "Fleischmann vintage" or just "Fleischmann". There seem to be quite a few videos with older Fleischmann. They may have better answers than me. ruclips.net/user/results?search_query=fleischmann+vintage Finally, you can do a search for dealers on their website: www.fleischmann.de/fen/dealer I found at least one in Tokyo (you need country and city). However, I suspect almost any H0 model train shop can help you and would have transformer and tracks for H0-scale. Don't know how easy that is to find in Japan... Hope this helps. Enjoy ;-)
@@ModelTrainFun - Thank you so much the detailed answer! It is deeply appreciated. ( I am old fashioned and don't understand a lot of the digital things. ) I also have an HO BR 232 ROCO #52460 "Ludmilla" Locomotive which runs just fine with a standard KATO power pack. I thought the small metal button on the Fleischmann might be for C track. I will check all the links you provided. ( I don't have the paper indicating the parts!) Actually I bought these trains in 1995. Love them!
@@hunterIII-vr4nq As far as I can see the KATO power pack is 12V DC, so you should also be able to run the Fleischmann locomotive with this one. However, best to double check both power pack and locomotive. Enjoy ;-)
Check description above for a link to the Märklin website. You can directly click on the link to the article 29074. The prices on the Märklin website are the recommended prices. You can often find stores that offer them cheaper incl shipping. The link: www.maerklin.de/en/products/details/article/29074 Enjoy ;-)
Thanks so much for your video! I just got this starter set and I'm finding that the engine will stall in certain spots on the track (slow down or even come to a stop). How would you suggest trouble shooting this?
Hi Katie, I suspect that either the track is dirty - or the wheels on the locomotive needs to be cleaned. The locomotive picks up the power from the track and there must be good conductivity in order to pick up the power. There are many advice on RUclips and the internet on how to clean tracks and wheels. You can see here how I do the track cleaning: ruclips.net/video/Yke1Akvh0Ds/видео.html ...video on locomotive maintenance is available here: ruclips.net/video/41Cts-OvNHs/видео.html Hope this helps - otherwise let me know. Enjoy ;-)
@@ModelTrainFun Thanks for your reply and for the links. Our set is brand new out of the box, so I would be surprised if it's caused by dirt. Would you recommend I contact the company?
@@katofish34 Hi Katie, I understand that it only stops at certain points on the track. This to me indicates it is not a constant issue. Did you break in the locomotive? Best practice is to run the locomotive 15-30 mins in each direction in a loop with relatively high speed. If it runs smoothly at decent speed after this and stops at certain spots it typically indicates dirty track/wheels. However, do not hesitate to also contact the shop where you purchased the starter set if it does not run properly. Hope this helps! Enjoy ;-)
@@ModelTrainFun It may be too late for me to start modelling Maerklin. I started modelling when I was 13 (1954) with UK models and started with Digital in the late 1990's. I now have a mobility disability and rely on people like you on you-tube for my enjoyment.
Hi Bill, I agree there is much to learn if you are a beginner from model train scales, to variants, different systems, different electronics, and how they fit together. This is indeed a 3-rail system. Enjoy ;-) Bo
Hey man, really nice video! I have a question, can i install a smoke generator on this locomotive(7226 or 72270)? The "smoke generator contact" feature isn't mentioned anywhere on the website i want to buy the set from, but i was hoping i could add that function through the mobile station(if that's how it works)
Hi Charis, Unfortunately you cannot add the smoke generator to this locomotive. To be able to add a smoke generator the locomotive must be designed for it. AFAIK - even if you get the more expensive BR 74 version with sound independent of this set there is no smoke contact. I see two options: 1. ask your favorite dealer if they have a Märklin starter set with smoke - some exist, but I believe they are expensive. 2. Buy an extra locomotive prepared for smoke. An example could be BR 24 (Märklin 36244) which already has smoke generator/unit installed. Enjoy ;-)
@@ModelTrainFun I just went with the closed loop type. I do have 2 cars with NEM sockets one of which I will put a fleischmann/hornby coupler on the end so that I can connect old Fleischmann and Jouef rolling stock. I also chose DC because here in America its most common. I will try to get a Marklin (or trix) start set in the future and an extension pack because i always wanted a Marklin/Trix set.
DId anyone else had problems with this starterset? Like my train was stuttering allot even after cleaning all my tracks multiple times as well as the train.
Hi Schmidey, Mine works great. Remember to clean both track and power pick up on locomotive (wheels and slider). Stuttering can also be because it has not been driven for a while. Try a couple of rounds at high speed and/or oil the locomotive. Track cleaning? see here: ruclips.net/video/Yke1Akvh0Ds/видео.html Locomotive maintenance? see here: ruclips.net/video/41Cts-OvNHs/видео.html Let me know if this helps! Enjoy ;-) Bo
@@ModelTrainFun Hey, thanks for your large reply. I already switched the power pick up part and cleaned the train and tracks multiple times, kinda running out of ideas. It's also not a big track so it shouldn't be an energy problem. I can't even get the train through the loop on highspeed, there are too many places where it just stops. Right now I am saving money to get another train, to see if the train is the problem or the tracks or both you know, but will prob take a few months. I will respond back to you once I got oine :)
@@schmidey6252 Also consider bringing your locomotive to your favorite local Märklin to see if it runs on their track. I am also wondering if you accidentally might have damaged the "pins" on the track when you connected them? You can use a voltmeter to measure the track - or a car with light. I have a car with light I use for troubleshooting in my cleaning trains - see here: ruclips.net/video/Yke1Akvh0Ds/видео.html Enjoy ;-) Bo
Das ist ja H0 oder kleiner, d.h. ... nicht maßstabgetreue Gleise, Wagen und Loks sind nicht so Vorbildgetreu, sie fahren, bremsen oder beschleunigen zu schnell, und es gibt unnatürlich viele Gleise.
Hi Stefan, This is H0 scale. I believe the measurements is accurate - Märklin do produce in exact scale for all but the longest models. You can adjust the speed, acceleration and breaking as you see fit. If you are into very accurate prototype look'n'feel, scenery and sound you can also do that if you like. Some models are more accurate that others and other track is available that might be more realistic for you. It's all a question of what you find fun and what you enjoy. I am more into just running the trains. I will never have room for prototypical scenery, accurate distance between stations and so on. If you have the room you can make things as much to scale as you like. All depends on what you enjoy. Hope you have fun with trains. Enjoy ;-)
Lamentablemente no hablo español. Pruebe los subtítulos y elija traducir automáticamente al español. Espero que funcione. Diviértete ;-) Hope my translator did a good job and apologize for any unintended insults :-o Don't forget you can choose to show sub-titles and choose auto translation to another language. Hope this helps ;-)
I have marklin train since 1962 when my father buy for me.
It's the first time I see a video in english in youtube. I'am from Brazil.
Great - welcome to Model Train Fun. Enjoy your Märklin trains ;-)
I have Marklin HO since 1959. I paid to have all my locos converted to digital - whole new world (but a little expensive!), with new C track, but digital operation is way better.
Great presentation! Appreciate that you do it in English so that us non german speaking can understand.
I am glad you like it and trying to do something for non-English Marklin lovers is why I started this channel. Have fun with model trains :-)
Just picked up a used Marklin ICE digital starter set, my first Marklin train. I really appreciate your video as it gave me some great info on Marklin trains.
Excellent - let me know of your experience with the ICE starter set. Enjoy ;-)
I'm hooked to model trains because of this so-called "teaser".
Hi Nendra, model train is a Great hobby I can highly recommend it. However, do look around to see what brand and type of trains you would like to have. I can recommend Märklin but there are also others around. Welcome to the hobby and have fun! Enjoy ;-) Bo
Excellent, thank you for speaking in English, greetings from Portugal !
Thanks for watching and welcome from Portugal! Is model railroading popular in Portugal? Enjoy ;-)
@@ModelTrainFun Yes, it's relatively popular here, HO is the favorite scale but there are also people in N and Z scale. Thank you again for the English videos ! :)
@@joaomonteiro1258 Excellent - enjoy ;-)
thamk you so much my grandpa bought a lot marklin for me when i was kid i dont know how to play it bu thanks god there is you
Hi Evandra, I am glad you like the channel. One thing to note is that if your grandpa's Märklin is older, then it is most likely analogue. My tutorials are for the newer digital Märklin, so you might have to also look around for other channels. Have fun and enjoy your trains ;-)
Yippeee!....
That brought a real smile to my face. Thanks for that.
LOL - model trains must be fun ;-)
En Español
Thank you! You helped me solve a big problem. (Well, not really big, but big for me.)
Hi Ragnar, I am glad I helped and hope you are having fun with model trains! Enjoy ;-) Bo Jensen
Thank you for showing me what Turtle Mode is! I have never known...
Very useful function - enjoy ;-)
I just ordered a digital start set (no locomotive or rolling stock) its just the mobile station, track, etc. And I ordered the Orange edition BR 52. so now I have to set up the entire thing. I run legacy and TMCC with my o scale trains, and DCS with my ho scale trains, but Marklin.....this is a whole new ball park! looks like I'll be teaching my son how to set up new consists and Marklin locomotives when we get more later on down the road.
Hi - sounds like a great start with Märklin digital - I hope you have fun with it. I have not seen the BR52 orange edition before. Looks like an interesting locomotive. As far as I can see it is a delta version, so an older/cheaper version of the the Märklin digital. Unfortunately, it means it will have less functions and no sound. It is made by Märklin in 1996 as a special MHI model. Looks awesome! Hope you and your son will have fun with Märklin. Enjoy ;-)
I also checked history and particulars of this T12 locomotive. Very interesting and long service. I think , for begining of 20 - century this was art of engineering and also operators and mechanics must be strong and well trained to operate this kind machinery. I am marine engineer , have expierence with steam boilers. Some times boilers are danger.
Hi Arturs, yes this is a very popular locomotive and I believe it also was produce in large numbers. Indeed steam boilers are dangerous and there have been cases throughout time with exploded locomotive boilers. If you join a club restoring locomotives perhaps you could play with a locomotive boiler? Enjoy ;-)
Like, like, like, like
Very nice review and intro-film. Thanks!
Glad you liked it! Have fun with trains ;-)
Tnx for a good review. And for doing it in english 😊
My pleasure! Enjoy ;-)
Thank you very much, nice starter set.
Glad you like it - enjoy :-)
Looks great. I also have a Marklin starter set with the same locomotive but with only two traincars (one was a oiltank thingy and the other a flat car). It did come with a switch tho, wich is very good. It also came with a remote instead of a controller, wich allowed 4 trains to run on a layout.
Sounds like a nice little setup. I believe the remote is a very simple controller that only allows you to use 4 pre-configured addresses. I have never tried it - how well does it work? Enjoy ;-)
@@ModelTrainFun I couldnt really test the remote since i only have a single train in my collection right now (im still a beginner and just starting to get into modeltrains), the one included in the starterset, so i cant tell you what its like to run multiple locomotives with the remote. It worked good with the single loco tho. I hope i'll be able to test it out after a i get a second loco.
@@shaggygabe728 As a hint I suspect that if you get a new locomotive it has to be programmed to one of the 4 addresses supported by the controller (check the maual). Unfortunately I do not believe you can program addresses with the controller. So if you buy a new locomotive ask the shop to set the address for you (make sure it is not the address of the locomotive you already have - check manual). Note: If it is a locomotive with a dip switch you can change it yourself - however, the modern locomotive decoders usually do not have this. Enjoy and have fun with trains ;-)
@ShaggyGabe I think I saw a notification about locomotive or track being dirty? However, I cannot see the comment on this video? I would recommend the following videos from @MarklinofSweden ruclips.net/video/0olM5Zq1zlY/видео.html and ruclips.net/video/41Cts-OvNHs/видео.html
Getting started with Märklin starter set 29074 (Beginner episode 1)(Like, like, like, like)
Hi, Glad you liked it. Enjoy ;-) Bo
Very helpful thank you. I have just bought a sound equipped three rail locomotive (by mistake) so rather than return it to Germany, I thought I'd experiment with 3 rail.
Hi, glad you liked the video. Indeed the 3 rail Märklin does not run on 2 rail. It can be converted to a 2 rail, but it is often not easy. Have fun with trains! Enjoy ;-) Bo
10:17 LOL!!!! FLAMINGO box.... That's VERY Danish my friend...It's called styrofoam.. Love it!!! 🙂
LOL Kaptajn - guilty as charged. Enjoy ;-)
I really like your presentations. They are very honest and real. You are doing a great job.
May I offer a little correction with your English? "Track" (singular) is used more often than "Tracks" (plural) in English. I don't know how it compares to Gleis/Gleise auf Deutsch . You buy "track" from Märklin, not "tracks". In the box are pieces of "track" (singular). You put together pieces of "track" (singular). We say "pieces of track" rather than "tracks".
The road across the rails is a "track crossing", again, singular. However, a completed set of rails, like two lines running down the set, or in the country, would then be referred to as "Tracks" ("Hans is on the other side of the tracks." meaning there is more than one rail line, you are on side, and Hans is on the other. For model RR, you buy pieces of track, put the track together, screw the track down, etc., etc. all using the singular.
That said, if I German were 1/4 as good as your English, I would be thrilled. I hope my unsolicited advice is not taken rudely. This will make your presentations even better. Keep up the great work!!
Thanks - glad you enjoyed it. Got it - track not tracks. Unfortunately you will find this mistake in many of my videos - will try to remember this in future videos. Enjoy and have fun!
Great to see...thanks
Glad you enjoyed - enjoy :-)
Wonderful show!
Glad you liked it - enjoy you model trains ;-)
Too bad no sound on a DCC loco, seems they could have given a few more digital features. Thanks for the video
Hi Ray, agreed that it would be nice with sound on this model. Often manufactors but cheaper versions in the starter sete to make them affordable. However, you can also find this locomotive from Märklin with sound and you can find bigger starter sets that have locomotive with sounds as well. Enjoy ;-) Bo
Easy breezy! Thanks!
You're welcome! Enjoy ;-)
Awesome!
Thank you! have fun with trains ;-)
@@ModelTrainFun :-)
Hello,
I’m new to Märklin C-Track HO DCC. The controller in my setup is green but everything else is the same.
I did buy an extension set that included DCC switching, but I am having a lot of trouble getting to grips
with the instructions on the controller on registration of a point motor to the controller.
I don’t understand when I press ‘shift+spanner points’ buttons that the display shows two sets of numbers
i.e. 1/2 or 2/3 etc, nor can I workout am I to press the buttons on the left hand side buttons or right hand side buttons.
If you have a video already done would you please advise on where to find it.
I don’t have the ‘3 rail system’ just the 2 rail C-Track.
Yours truly,
ross
Hi Ross, The MS2 with the green button is the same as the MS2 with the red button - just a different color. Everything else is the same with the exception that the green is by default set to DCC (instead of MM) for locomotives and accessories. When you are talking about 2-rail C-track I assume that you mean the Trix C-track?
Using the MS2 and the Trix C-track you can benefit from many of the videos on this channel if you keep in mind you are using 2-rail instead of 3-rail e.g. same turnout decoders, turnout mechanisms and same way to operate the MS2. For the MS2 you can use MFX for modern Trix locomotives and will have to use DCC for locomotives of other brands.
When you click on the Turnout button you will see "Keyboard 1: 1/2". This indicates you see two accessory addresses at the same time: address 1 to the left and address 2 to the right. You can have a turnout on each address or e.g. a 4-way signal that covers two addresses. Check out here to see how it works: ruclips.net/video/SaOI8KMl3vM/видео.html
Tip: check out the following playlists on this channel to see more useful videos:
- Märklin Beginner: ruclips.net/p/PLYAhs-Pox3sG31NwCfqIuk6IvI19q2czn
- Mobile Station 2 (MS2): ruclips.net/p/PLYAhs-Pox3sFts7dGFLb77e16yIodgG59
Hope this helps. Welcome to the channel. Enjoy ;-)
Wie fügt man dieser Dampflokomotive Rauch und Geräusche hinzu?
As far as I know it is not easy to add sound and smoke. To add this you would need a new decoder and I am unsure if a smoke unit fits inside the locomotive. Enjoy ;-)
Hello from Germany. Great video. It´s really very good how you explain the märklin system. Have fun with it. You have my "like" and "Abo". And a "Yipieh!" too 🙆♂
Hi Dieter, awesome and glad you liked the video. Welcome and I hope you will find more interesting videos on the channel. Enjoy ;-)
der turtle Mode ist für das Rangieren gedacht. Man kann die Beschleunigkeit genauer steuern.
Hi, great info and thanks for the input! The turtle mode indeed makes it easier to maneuver. As you mention it gives direct control of the acceleration/braking. Enjoy ;-) Bo
Why have you not considered a permanent layout in your apartment? Just a curious thought
Currently, I live in a hotel - so I prefer a temporary layout. I have however an intension of making at least the skeleton for a layout. To be honest I have never had space for a permanent layout, but always dreamed about having one... one day. I briefly showed the 3D view of the track diagram I intend to make on the table (one day) in the 1010 subscribers video. ...one day... Enjoy ;-)
@@ModelTrainFun looking forward to Video #1010
At first need buy train model and after that need build arund house.)))
So you can’t run this train on a regular HO track with a Different DCC controller?
The controller can also work as a DCC controller (even the locomotive can, but not on regular track/2-rail). The track and locomotive are 3-rail and are not compatible with 2-rail. You can find the same digital starter set as 2-rail/DCC with the same controller with Trix. Check out Trix 21528: www.trix.de/en/products/details/article/21528
Enjoy ;-)
@@ModelTrainFun thanks!!!
what is needed to go from this or any other starter set to CS3? A new powerbox?
To get started with the Central Station you need a CS3 and a power supply. You can re-use track, accessories, locomotives and freight car. The MS2 can be plugged into the CS3 as an extra controller. The power supply from most starter set can be used for when you want to connect a L88. The only item you cannot re-use is the connector box. You can see how to get started with the CS3 in this video: ruclips.net/video/wANbrR0fdJk/видео.html
Enjoy ;-)
Really nice starter set. I have an American based layout but hey it doesn’t mean I can’t have foreign locomotives from other countries
LOL - agreed. I have trains from multiple countries (and era's) as well. Some like everything strictly fitting together and others (like me) just like any train ;-) Happy modelling!
Came back to see this again as looks better quality than Bachmann. How are track accessories?
Hi David, I like Märklin and the accessories - everything fits together. However, do remember that Märklin is a special 3-rail system and it can be hard to find rolling stock that is not European (with focus on Germany, Austria and Switzerland). Enjoy ;-) Bo
I ordered the set shown. The track will be different from what I am use to (Bachmann EZ Track). But I look forward to having some respectability sized equipment at a better price point than MOST American counter parts.
Hi, Sounds great - I hope you like and have fun with the set! Have fun with the trains. Enjoy ;-) Bo
@@ModelTrainFun An update, I'd be lying if I said anything other than I love them. The tracks operate better than EZ-track, and the cars a so small I can fit them in my hand. Perfect for what I want to do. I got a 4ft x 8ft (1.2m x 2.4m) table I was gonna use for modeling one of the many North American Roads I liked as a kid that I can now use for these trains. I plan on ordering the C1-C5 track extensions, 3 more freight cars, 2 or 3 coaches, AND another engine over time before I build my layout proper. I was gonna do something agricultural themed with my American trains years ago, now I think I will do something mountainous, in the late-summer early fall shortly after the end of WW2 on both theaters (1946-50). Geographically, I have no idea as to where exactly, except for two key ideas, a junction village, and in the Western Block. That's all that I need to really have fun, a basic idea; a foundation in which to tell a story, unlike the geographically locked basement empires here in the US...no fun, no humor, and to fragile.
@@BattleshipOrionI am glad you like it and hope you will have lots of fun making a layout. I like the mountains and making a spaghetti layout with trains entering/leaving tunnels in many levels. However, this is also challenging to make so everything looks natural and works reliably. Perhaps one thing to remember is that Märklin do not make many US models and the US model manufactors do not produce locomotives for Märklin 3-rail. However, there is also a 2-rail Trix version. Enjoy your trains ;-) Bo
If I would like to extend this set. Which set or items should i Get in order to extend it with 2 or 4 turnouts + tracks etc?
Hi Kaptajn,
There are several sets you can use for extension. Some sets have trains and tracks while others only have tracks. The starter set should also have included some brochures with ideas.
For C-track extension packs you have the Märklin 24902-5. You can get inspiration in the C-track expansion plans brochure: www.maerklin.de/fileadmin/media/service/faq/Brosch%C3%BCre_C-Gleis_Gleispl%C3%A4ne_Erg%C3%A4nzungspackungen.pdf
On this channel check out Märklin Beginner playlist: ruclips.net/p/PLYAhs-Pox3sG31NwCfqIuk6IvI19q2czn
Episode 2 more tracks and trains: ruclips.net/video/IR6udIoRJso/видео.html
...and the video on the Märklin track geometry (Episode 3): ruclips.net/video/RhrK0ylf9eg/видео.html
Have fun with trains! Enjoy ;-)
So mäeklin says that the turtle mode is for "rangieren"(german word) so i googled it in in english its called "rank"?
Hi, it is for "switching" or "shunting" - hence when you need more precise control while moving cars around in the yard. Enjoy ;-) Bo
Thanx for the vid! Could you help me a bit? I just wonder if the frogs of the Marklin C Track turnouts are powered. What do you think?
The frogs are powered. However, this is less important on a 3-rail system like Märklin. On 2-rail systems the challenge is that you need both rails. On Märklin where you have the 3rd center rail you just need one of the rails... Enjoy ;-)
@@ModelTrainFun Thank U very much for the answer! :) Your vids have convinced me that the Marklin system is quite easy to build up and of high quality. I must build a Marklin layout! :) Good luck!
Glad you like it - enjoy ;-)
I have a question, i have some vintage marklin trains, including a set that i found out was 2975, and bunch of other railroads and locomotives, can you please tell me, if you know, which year this set was produced, and what it may cost today?
I have no idea - I don't know much about vintage Märklin. Try one of the Märklin groups on Facebook. They might be able to help you. A vintage Märklin group: facebook.com/groups/923744951425309/ that might help. Best of luck and enjoy the vintage Märklin ;-)
Also looked in the Model Railroad Collector Wiki (www.modelrailroadcollector.wiki/en-us/), but did not find 2975 - sorry.
@@ModelTrainFun i will look it up, thanks!
leuke review
Thanks - enjoy the hobby :-)
Been looking for large green mat but can only find small ones. Yours looks to be decent size. Can I ask where you got it from?
Hi Kuno, I am using a NOCH Grass Mat - specifically "Summer Meadow" (00012). You can find it here: www.noch.com/en/grasmatte-sommerwiese-200-x-100-cm.html Enjoy ;-)
Where to purchase this train... I'm from India
Hi - welcome to the channel. Check out the Marklin store locator www.maerklin.de/en/service/store-locator. I see one store in India. Otherwise consider ordering from either USA or Germany. German store will probably have lower prices.
The ones I usually look for in Germany are:
- www.haertle.de
- www.modellbahnshop-lippe.com
- www.modellbahn-kramm.com
The last two looks like they also ships to India. But look around - many stores to choose from.
You are not the first from India to ask, so please let us know if you have success. Always good to share experiences with fellow model railroaders.
Enjoy ;-)
Marklin look great and quality better than most other well known manufactureres......how are accessories in this range?
Hi David,
I like Märklin and it is a great product! There is a full range of accessoires where everything works well together.
Do remember however, that this is a 3-rail system where most other brands makes 2-rail. This means that locomotive running on the Märklin tracks must have an extra slider underneath. I like that but it means that e.g. American locomotives are rare - many German and European. Märklin is one of the most selling in Europe.
Hope this helps! Enjoy ;-) Bo
Hi 👋 does the Trix station 2 work the same as Marklin. Thanks
Hi John, yes - the Trix MS2 is the same as the Märklin one. Only difference is a Green button and it comes by default set for DCC. You can see what MS2 items are compatible and what fits together in this video: ruclips.net/video/6hX2JxWqQeM/видео.html Enjoy ;-)
German Marklin Electric Train Combo Kit Like
Agreed - nice starter set. Enjoy ;-)
Thanks for video! I got exactly same start up model and learned how to use. Were some difficulties. What You suggest to upgraid this train model?
Hi Arturs,
To me I enjoy having multiple trains. So I would buy tracks so I can make a 2-track main line (double) loop. This means buying some 24230 curves and more matching straight track (same amount as you already have in the starter set.
Furthermore, I would make a cross over between the two tracks. You can do this in two ways. Buy two of the same curved turnout (either 24671 or 24672). Or buy two of the same normal turnout (either 24611 or 24612).
You can also consider having a siding using one each of normal turnout with two 24224 curves and a few straight.
Finally, get one more locomotive and some cars. Perhaps a passenger train?
Hope this helps! Enjoy ;-)
@Christian XI - I accidentially deleted your comment on this video. It started with "Christian XI replied: "Model Train Fun Thanks for taking your time to answer my question. I will check out the videos. I've had the set for less than a week so I'm a little surprised that maintenance of the loco (and" - sorry
If your locomotive truly is lees than a week old, then it sounds suspecious. If the track and locomotive is brand new, then you shold consider contacting the Märklin dealer where you purchased it. If it is used it is another matter as you do not know how long it has been used previously.
Either way I would consider giving it a good clean.
@virgo3008
Enjoy ;-)
Ich brauche Hilfe. Ich habe eine Märklin 74 854 Digital MFX-Lok, die von der Mobilstation nicht mehr registriert wird. Könnten Sie mir helfen?
Hi Milton, Sorry for the late answer. Did you figure out how to make it work? Otherwise, a couple of hints: You can try to delete the locomotive from the MS2 and re-register. If this does not work. Try with the locomotive alone on the track and use the "Find" under locomotives. If this does not work - often unfortunately a reset of the MS2 might be needed. Did this help? Enjoy ;-) Bo
I have a question, hope you can help. I have quite a few train engines (high speed models, (steam) locomotives, etc.), that belonged to my dad and grandfather. They've passed away a few years ago, but because of all the fond memories, I just couldn't part with them. So I've recently decided to restart the hobby. However, some models are over 30 or 20 yrs old. Would they all work with this set, or is some adjustment required?
20-30 years old? Are they Marklin locomotives or another brand? There is a good chance they are analogue. Take a look at the boxes of the locomotives. Back then the boxes for analogue Marklin locomotives were typically white and the boxes for digital Marklin locomotives were grey. You can also check if there is printed Marklin Digital, FX or MFX on the boxes. Marklin digital locomotives will work with the mobile station while the analogue will not. Analogue locomotives can be changed to digital - however, this can be a difficult and expensive operation. Many choose to stay with analogue for this reason. Note: modern digital locomotives can run on an analogue layout (although with reduced functionality). If you have a model train shop shop near you try to ask them. Note: as you did not state it - it might not even be Marklin brand locomotives? You can recognize a Marklin locomotive by the slider it has underneath for the "3rd rail".
@@ModelTrainFun Thx for the info, will check it out to be sure. :)
All Märklin models. Just the Eurostar model is from Jouef, I think, but it requires wider tracks.
@@bo666dom I don't recall Jouef making AC trains so be careful because if you put the DC Jouef on the AC track it will burn the motor even if u don't run it! Marklin is 16 Volts AC and Jouef is 12 Volts DC.
@@frenchustube Thx for the info. Might be the reason why my dad never used it, as the entire scenery was set up with Märklin tracks.
Thanks for the nice video! I have one question. I recently bought the Märklin starter set 29074 and I noticed a problem in the operation. When the loco goes in slow speed over some of the curved tracks there is a small hesitation, like it stops and goes again. Do you know any possible cause for this?
Glad you liked the video and welcome to the hobby with your Märklin 29074 :-)
Regarding the issue you describe: my best guess is that you need to clean the tracks and/or the locomotive wheels. After a while the tracks and the locomotive gets dirty. In this case the power is not transferred effectively from the tracks to the locomotive. A typical indicator of cleaning needed is that you see the light flicker or very very shortly go out at low speed. When it gets more dirty you cannot drive slow. On very dirty tracks the locomotive just stops. I suggest you start with the tracks. To clean the tracks first try to gently rub the tracks with a piece of cloth. Check if dirt rubs off. I use Märklin smoke fluid to clean the tracks. Consider a cleaning car such as Märklin 46049 to keep tracks clean. You essentially do the same with the locomotive wheels. Start by visually checking the wheels. However, everybody has their own way of cleaning. Ask around, ask your local model train shop and find your preferred method. I hope this helps.
Note: if I have not run my trains for a while tracks might be dirty and need cleaning. Often it is enough just to drive the trains...
Enjoy :-)
I had the same problem around some curved tracks with my new 29074 set. It only happened with the tender lok BR 74 when running at slow speed but not my Mallet BR 53.
@@ModelTrainFun Thanks for suggestion. I also have this problem and think , that is problem with contacts.
@@arturspipins7385 I believe it i mostly likely track cleaning or wheel cleaning that is required. You could have run the locomotive so much that the slider is damaged or needs replacement. Here you can see how I prepare my layout for running: ruclips.net/video/Yke1Akvh0Ds/видео.html Hope this helps. Enjoy ;-)
Thank you so much for the video. I am a beginner. I have a Fleischmann HO Lufthansa Express locomotive ( 4378) which I bought new about 20 years ago. I only sometimes used it for display. After the Pandemic began, I noticed that under the front part of the locomotive, there is a small round metal button. Can you tell me what track & power supply I would need to get it moving? I bought it in Japan and the store has since closed. As far as I know, the loco has no sound and is not DCC. I am in still in Japan.
Hi Hunter,
Sounds like a nice vintage Fleischmann locomotive. Unfortunately, I do not have much experience with analogue locomotives. Did a quick search on the internet.
You can find the manual here listed as a DC locomotive: www.fleischmann-ho.nl/downloads/detailoverzichten/electrischelocomotieven/4378-1994.pdf From the manual I do not see the round metal button you are describing... A guess is that it is for switching pickup of power between track and catenary - however, this is a guess from my side. If you have not used it for 20 years, there is a good chance it might need some maintenance before being able to move.
As this is a DC locomotive it needs normal 2-rail tracks you can get this from almost any brand that has H0-gauge track (except Märklin). This could be Roco, PIKO Trix, PECO, and so on. My guess is that this was the power supply one would originally buy for it: www.fleischmann.de/fen/products/control/analog-control-devices/6735-msf-controller-transformer.html I might be wrong as I am not familiar with vintage Fleischmann. However, the one shown supports 14 V DC, so an analogue model train transformer that supports 14V DC would be the choice. Again - I could be wrong.
A group that I would suggest you could ask is: www.tapatalk.com/groups/germanrailfr/
Also try searching on RUclips for "Fleischmann vintage" or just "Fleischmann". There seem to be quite a few videos with older Fleischmann. They may have better answers than me. ruclips.net/user/results?search_query=fleischmann+vintage
Finally, you can do a search for dealers on their website: www.fleischmann.de/fen/dealer I found at least one in Tokyo (you need country and city). However, I suspect almost any H0 model train shop can help you and would have transformer and tracks for H0-scale. Don't know how easy that is to find in Japan...
Hope this helps. Enjoy ;-)
@@ModelTrainFun - Thank you so much the detailed answer! It is deeply appreciated. ( I am old fashioned and don't understand a lot of the digital things. ) I also have an HO BR 232 ROCO #52460 "Ludmilla" Locomotive which runs just fine with a standard KATO power pack. I thought the small metal button on the Fleischmann might be for C track.
I will check all the links you provided. ( I don't have the paper indicating the parts!) Actually I bought these trains in 1995. Love them!
@@hunterIII-vr4nq As far as I can see the KATO power pack is 12V DC, so you should also be able to run the Fleischmann locomotive with this one. However, best to double check both power pack and locomotive. Enjoy ;-)
Доброго дня, скажіть будь ласка де цей паровоз можна купити і яка ціна. Дякую
Hi, It is this one and you can see the price on the website as well. Enjoy ;-) Bo www.maerklin.de/en/products/details/article/29074
May i know how much it costs i would like to know the set looks realy nice
Check description above for a link to the Märklin website. You can directly click on the link to the article 29074. The prices on the Märklin website are the recommended prices. You can often find stores that offer them cheaper incl shipping. The link: www.maerklin.de/en/products/details/article/29074
Enjoy ;-)
@@ModelTrainFun thank you
How much you buy that?
You can find the standard prices on Märklin website www.maerklin.de/en/products/details/article/29074 Enjoy ;-)
Thank you
Thanks so much for your video! I just got this starter set and I'm finding that the engine will stall in certain spots on the track (slow down or even come to a stop). How would you suggest trouble shooting this?
Hi Katie,
I suspect that either the track is dirty - or the wheels on the locomotive needs to be cleaned. The locomotive picks up the power from the track and there must be good conductivity in order to pick up the power.
There are many advice on RUclips and the internet on how to clean tracks and wheels. You can see here how I do the track cleaning: ruclips.net/video/Yke1Akvh0Ds/видео.html
...video on locomotive maintenance is available here: ruclips.net/video/41Cts-OvNHs/видео.html
Hope this helps - otherwise let me know.
Enjoy ;-)
@@ModelTrainFun Thanks for your reply and for the links. Our set is brand new out of the box, so I would be surprised if it's caused by dirt. Would you recommend I contact the company?
@@katofish34 Hi Katie, I understand that it only stops at certain points on the track. This to me indicates it is not a constant issue. Did you break in the locomotive? Best practice is to run the locomotive 15-30 mins in each direction in a loop with relatively high speed. If it runs smoothly at decent speed after this and stops at certain spots it typically indicates dirty track/wheels. However, do not hesitate to also contact the shop where you purchased the starter set if it does not run properly.
Hope this helps! Enjoy ;-)
This is very helpful. I did not break it in! I really appreciate the advice 🙂.
@@katofish34 break in should not be necessary but it does help 😜
You have converted me to Maerklin.
I hope you have fun with Märklin - actually with any model train - they are all fun. Enjoy ;-)
@@ModelTrainFun It may be too late for me to start modelling Maerklin. I started modelling when I was 13 (1954) with UK models and started with Digital in the late 1990's. I now have a mobility disability and rely on people like you on you-tube for my enjoyment.
Japanese brand also tomix and kato ,Germany maybe marklin
Hi Mau Wah, Never heard about Tomix, but like Kato and Märklin. Enjoy ;-) Bo
one thing to show is that is a 3 rail loco, someone not knowing marklin, might not know about OO or Ho 3 rail
Hi Bill, I agree there is much to learn if you are a beginner from model train scales, to variants, different systems, different electronics, and how they fit together. This is indeed a 3-rail system. Enjoy ;-) Bo
@@ModelTrainFun although o-scale 3 rail is where the real nightmare is
sad thing is amazon page is not showing the 3 rail shoe
No sound though?
No sound, but you can find the class 74 by itself with sound. Enjoy ;-)
Hey man, really nice video! I have a question, can i install a smoke generator on this locomotive(7226 or 72270)? The "smoke generator contact" feature isn't mentioned anywhere on the website i want to buy the set from, but i was hoping i could add that function through the mobile station(if that's how it works)
Hi Charis,
Unfortunately you cannot add the smoke generator to this locomotive. To be able to add a smoke generator the locomotive must be designed for it. AFAIK - even if you get the more expensive BR 74 version with sound independent of this set there is no smoke contact.
I see two options: 1. ask your favorite dealer if they have a Märklin starter set with smoke - some exist, but I believe they are expensive. 2. Buy an extra locomotive prepared for smoke. An example could be BR 24 (Märklin 36244) which already has smoke generator/unit installed.
Enjoy ;-)
Wow, thanks for the detailed explanation! I'm a total beginner so your help means a lot. Thanks!
@@charis.s I hope you will have fun with model trains. Enjoy ;-)
Wäre schön wenn es auf Deutsch wäre mit Englischen UT
Leider spreche ich nicht Deutsch ser gut . Sie können deutsche untertitel wählen. Viel Spaß mit Modelleisenbahnen ;-)
When Getting into European Models I notice there are way too many style of couplers.
Yes - but I find that manufactors deliver with compatible couplers (Relex). Enjoy :-)
@@ModelTrainFun I just went with the closed loop type. I do have 2 cars with NEM sockets one of which I will put a fleischmann/hornby coupler on the end so that I can connect old Fleischmann and Jouef rolling stock.
I also chose DC because here in America its most common. I will try to get a Marklin (or trix) start set in the future and an extension pack because i always wanted a Marklin/Trix set.
Vintage Fleischmann and Jouef - nice! As for Marklin/Trix - I can highly recommend it. Enjoy and have fun with your trains :-)
DId anyone else had problems with this starterset? Like my train was stuttering allot even after cleaning all my tracks multiple times as well as the train.
Hi Schmidey,
Mine works great. Remember to clean both track and power pick up on locomotive (wheels and slider). Stuttering can also be because it has not been driven for a while. Try a couple of rounds at high speed and/or oil the locomotive.
Track cleaning? see here: ruclips.net/video/Yke1Akvh0Ds/видео.html
Locomotive maintenance? see here: ruclips.net/video/41Cts-OvNHs/видео.html
Let me know if this helps! Enjoy ;-) Bo
@@ModelTrainFun Hey, thanks for your large reply. I already switched the power pick up part and cleaned the train and tracks multiple times, kinda running out of ideas. It's also not a big track so it shouldn't be an energy problem. I can't even get the train through the loop on highspeed, there are too many places where it just stops. Right now I am saving money to get another train, to see if the train is the problem or the tracks or both you know, but will prob take a few months. I will respond back to you once I got oine :)
@@schmidey6252 Also consider bringing your locomotive to your favorite local Märklin to see if it runs on their track. I am also wondering if you accidentally might have damaged the "pins" on the track when you connected them? You can use a voltmeter to measure the track - or a car with light. I have a car with light I use for troubleshooting in my cleaning trains - see here: ruclips.net/video/Yke1Akvh0Ds/видео.html Enjoy ;-) Bo
Извинете знаете ли? Дали може да си поръчам Fenfa Intel Express
Hi Yanislav, I am not familiar with Fenfa Intel Express - sorry. Perhaps try Ebay? Enjoy ;-) Bo
Das ist ja H0 oder kleiner, d.h. ...
nicht maßstabgetreue Gleise,
Wagen und Loks sind nicht so Vorbildgetreu,
sie fahren, bremsen oder beschleunigen zu schnell,
und es gibt unnatürlich viele Gleise.
Hi Stefan,
This is H0 scale. I believe the measurements is accurate - Märklin do produce in exact scale for all but the longest models. You can adjust the speed, acceleration and breaking as you see fit. If you are into very accurate prototype look'n'feel, scenery and sound you can also do that if you like. Some models are more accurate that others and other track is available that might be more realistic for you. It's all a question of what you find fun and what you enjoy.
I am more into just running the trains. I will never have room for prototypical scenery, accurate distance between stations and so on. If you have the room you can make things as much to scale as you like. All depends on what you enjoy.
Hope you have fun with trains. Enjoy ;-)
En Español.
Lamentablemente no hablo español. Pruebe los subtítulos y elija traducir automáticamente al español. Espero que funcione. Diviértete ;-)
Hope my translator did a good job and apologize for any unintended insults :-o Don't forget you can choose to show sub-titles and choose auto translation to another language. Hope this helps ;-)
Marklin Ho facebook.com/groups/marklinhospoor/
Normally I would not allow just a link, but this seems to be to a Facebook group just created. Please tell us more about it 😜
Note to other viewers: there are many groups on Facebook on Märklin and H0 related topics - take a look and see what’s interesting. Enjoy 😜
@@ModelTrainFun yes its a new group
rip off..............................
Sorry you didn't like it. Enjoy your model trains ;-)