Looking sweet, I should get out my Limited addition blazer back on the road I took the aluminum engine out of it for my rat rod, I bought it in 2016 I’ve only driven 50 feet25’ each way been sitting ever since
I agree the antenna looks much better on the cab and its placement means you can crawl with the cover off while having the antenna in place. Zip tying the wires first will make wrapping them easier plus it makes them look tighter. 👍👍
You can program the new ones with the old card I’ve got two of them the adjustable drag brake on the fly is a boon on trails better than any of the others .Both my fusions lasted about two years ,after that they seem to have problems with knowing what the exact battery level is .they start to stutter like the battery is getting low when you give the throttle a quick stab .but when you check the battery levels they are still above half charged.
Good to see you back and loving the rig! That new H/W 1080 has a cool feature. You can set up 3rd channel on your radio that controls the drag brake. Super nice feature to run from trail to crawl . Looking forward to seeing more vids
The Blazer looks mint.👍🏻 Have you considered building a man made obstacles course?. To test the FTX Outhouse 2😜 I made a obstacle out of 1 90° bracket 90mmLx60mmW and a piece of 50mmLx40mmW angle iron welded, inline, point up 🔺️ on a scrap bit of 6mm plate with some 3mm flat strap welded into a step and covered it in real rust....then some grip tape on the bottom to stop it sliding on the concrete🤬😄 The peak of each is 75mm, 47mm and 25mm retrospectively. So decent test for my 1/10 and 1/24 scales.
You’ve got an awesome selection of square bodies. I just got the discontinued gmc top kick body . Think it’s gonna go on my nitro savage monster truck. That leaves me with a spare square body lexan body to do something with. Guess I’ll be building a crawler this winter too lol 😂
Please get some shock pliers or other non-marring pliers! Makes me cringe when you grab new shiny things with a pair of needle nose. Sorry, I am a little OCD. lol
These are 1/10 scale, huge compared to the FMS. The bodies are so much more detailed and even have full interiors. Leaf springs perform more like a real truck and these being so big and heavy its a different world
Man, that's a good-looking Blazer right there.
Fantastic looking trucks! That wheel/ tire combo on ghe blazer is the best I've ever seen!
Man it looks good jash the other builds they look great
Looking sweet, I should get out my Limited addition blazer back on the road I took the aluminum engine out of it for my rat rod, I bought it in 2016 I’ve only driven 50 feet25’ each way been sitting ever since
Right on I’ll see you next time 🤙🤙😎
Should paint the wheels white and patina👍🏽
Awesome video love that truck 😍
Looks great 👍🏻👍🏻👍🏻👍🏻
That 4Runner needs the fender flares and it would look mint 👌🏽 With the wheel stance. 👍🏽
I agree the antenna looks much better on the cab and its placement means you can crawl with the cover off while having the antenna in place.
Zip tying the wires first will make wrapping them easier plus it makes them look tighter. 👍👍
You can program the new ones with the old card I’ve got two of them the adjustable drag brake on the fly is a boon on trails better than any of the others .Both my fusions lasted about two years ,after that they seem to have problems with knowing what the exact battery level is .they start to stutter like the battery is getting low when you give the throttle a quick stab .but when you check the battery levels they are still above half charged.
Just about to throw a fusion 2,300KV in my Tf2 so glad you covered it here.
Love your content & Hot Rods!
Looking good!
Looks absolutely amazing I’m planning on doing a rc4wd truck next I’ve been debating on the blazer or k/10 now I have some inspiration
Same motor in my Scottsdale.
I like your tires
I'd. Like to see Josh 's version of the lc80.. the Korean styrene would be nice to see.. lol jj. You have American cars whooped.
Good to see you back and loving the rig! That new H/W 1080 has a cool feature. You can set up 3rd channel on your radio that controls the drag brake. Super nice feature to run from trail to crawl . Looking forward to seeing more vids
The Blazer looks mint.👍🏻
Have you considered building a man made obstacles course?.
To test the FTX Outhouse 2😜 I made a obstacle out of 1 90° bracket 90mmLx60mmW and a piece of 50mmLx40mmW angle iron welded, inline, point up 🔺️ on a scrap bit of 6mm plate with some 3mm flat strap welded into a step and covered it in real rust....then some grip tape on the bottom to stop it sliding on the concrete🤬😄
The peak of each is 75mm, 47mm and 25mm retrospectively.
So decent test for my 1/10 and 1/24 scales.
You’ve got an awesome selection of square bodies. I just got the discontinued gmc top kick body . Think it’s gonna go on my nitro savage monster truck. That leaves me with a spare square body lexan body to do something with. Guess I’ll be building a crawler this winter too lol 😂
What kind of paint did he use on the tires? They look perfect! The blazer is awesome
I’m waiting on him to let me know lol.
Cheap servos only go on rigs , you lend out or are selling lol.
A cross thread is just locktite on a budget
Cross threads are better then no threads.
Yep ,natures loctite.
Wow awesome video, and cool rc car 👍👍💯
Please get some shock pliers or other non-marring pliers! Makes me cringe when you grab new shiny things with a pair of needle nose. Sorry, I am a little OCD. lol
He could put some adhesive heat shrink on the pliers for a softer grip.
Haven't seen any Leaf Spring BLAZERS yet, what brand R those? How do they compare with the Coil springs on the FMS K5 BLAZER?🤑👊👍✌️🦼🇺🇸🦅
These are 1/10 scale, huge compared to the FMS. The bodies are so much more detailed and even have full interiors. Leaf springs perform more like a real truck and these being so big and heavy its a different world
They are RC4wd.com brand.