That's insane. I can't imagine having the patience, much less talent required for these builds. I'm sitting all pleased with myself for making my Gorgon brushless, reinforcing the body and adding a store bought wheelie bar yesterday. These are truly built, not bought. I wouldn't be surprised if they mined their own ore and harvested the lumber for them. Great work guys!
@@Oilshock I went with Gorilla tape inside. I didn't do the back good enough tho. I busted a back corner today. Definitely do 2 or 3 layers on the bottom rear.
"What more could you ask for?" Nachos. The answer is always Nachos. These builds are nothing short of spectacular. Just amazing work! Thanks to everyone for sharing their talent.
The tow truck looks authentically used, abused and old. Yet still carries an air of toughness that only the Land Rovers had. Beautiful work on that one Qfrcy.
I’m always amazed at what people are doing with styrene, but Fab1ten’s and RSRC’s metal work really hits me in a warm spot. I love a well machined part or a nicely coped tube joint. Really gets me excited about building trucks!
Ive been watching make it rc lately. The model car stuff is absolutely a throwback to my youth, but every one of these is fantastic level of detail far beyond what used to be done in model cars, let alone rc!
Love the Pathfinder!!! Owned the 1:1 of that 2 door model. Took a lickin and kept on tickin. Nice to see actual hand work/creating being done on may of these.
I wish i had half the talent that these builders have in there pinky finger..... Amazing builds, im honored to just see these builds on your channel 💯 thanks for sharing these rigs, so awesome!! 👍👍
Happy f-n New Year y'all tiny truck guys and gals(?)!! Praise wheel. Fun stuff. And better than a poke in the eye with a sharp stick!! 😂❤ Thanks Matt!!
Great video Matt! and content from SBG is totally the best! ;) I had a real 1/1 series 3 years... multiple decades ago... and I'm thinking that Quintons build is an amazingly scale build 👍
Thank You for sharing this amazing builds. Lots of respect for the skills and ideas. Very impressive. Thank You and please go on in the same way in 2024. All the best, Stefan
Wow, thanks for sharing all those those spectacular scale builds Matt! Hats off and Happy New Year to you and all the scale builders out there doing the work that we can all inspire to do! Thumbs up and best regards! Happy New Year 🎉🍷🧨🍸🎆🍹🎋🍺✨🥂🎊!
It's a form of art for sure.. and that first one was just 🤯 wow. I have some metal working skills (had to make a complete wing section from sheet aluminum in college), and have much respect for that man's skill and patience. You can see the heart and soul put into that one.
Thanks to you and Josh for providing me something to look forward to every week. Nice to have good content in the hobby that consumes my life. Happy new year ,Brother 🎉
Amazing builds and great video recap. Do we get a montage of all your intros throughout the year? Loved when you did that last year. I'm chuffed to see what you do in 2024🎉
Stunning work by everyone. So many good details in each one. It would be impossible to pick out a favorite! I applaud everyone's investment of time into them. Thanks for sharing and Happy New Year!
On the first build (sand scorcher): It reminded me of home. As a student in Kenya many of my classmates apprenticed on the Safari Rally the name that the East African Safari Rally is now called. (Note there is a race for historic vehicles called the East African Safari Rally in honor of the history of the race).
I haven't posted in the guild in a long time, But its always a great place for info help and idea's. There are so many amazing builds i would not want to even try to pick a top build,
Many thanks, amazing builds, very cool you shared these projects with all of us. May I add, reallly enjoyed your Driftmoossile track action on the Gram, good fun and the circuit looked totally appropiate with all the scale kerbs and the related, let's call it, rc drift track infrastructure. Happy New Year, top notch SBG selection and display of modelling skills. Thank you and like added 😊
I truly had ambitions of at least submitting an entry into this year's showcase. Maybe for 2024? Some of these builds are just insane!! Thanks for sharing.
Absolutely amazing builds!!! Every one of these builders is a true artist and craftsman! Thanks for sharing all these incredible works of art Matt!!! Happy New Year everyone!
Awesome builds. For some reason I get "Page could not be loaded" or "Secure Connection Failed" when trying to enter SBG forum. Do not have these with any other page or forum I visit. Happy New Year!
I hate to be that guy but somebody's gotta do it. That's a Series III Land Rover. The plastic grille and fender mounted headlights are the distinguishing features. Although there were some very late Series IIAs with the fender mounted lights, that is rather uncommon and they still had the metal wire grilles.
@@scalebuildersguild The quality of the manufacturers is incredible. I was impressed by the small details and the quality of work on the RCs. Thank you again for sharing this video.
Yes, I know it's a Series III. I misspoke.
Such an honour to have my Land Rover Tow truck in this video! Thanks so much Matt, I can’t wait to see what next year brings us all! 😍
Happy New Year my friend!
Your truck ist awesome...IT was great to See it live on SherpaDays this year.... Happy new year!
@@prinznapp2018 thank you so much! 🤩
Amazing build, your Craftsmanship and talent are on another level 💯
Recovery vehicles are so awesome. I really want to build a Matt's Off-road Recovery Wrecker. Amazing work!
That's insane. I can't imagine having the patience, much less talent required for these builds. I'm sitting all pleased with myself for making my Gorgon brushless, reinforcing the body and adding a store bought wheelie bar yesterday. These are truly built, not bought. I wouldn't be surprised if they mined their own ore and harvested the lumber for them. Great work guys!
If you haven't already maybe consider a tamiya kit
how did you reinforce the body? I got one for christmas but the body is pretty weak. thats probably the only downside besides the battery.
@@Oilshock I went with Gorilla tape inside. I didn't do the back good enough tho. I busted a back corner today. Definitely do 2 or 3 layers on the bottom rear.
Kevin Talbot just put a tape net and resin to glue it. Strong and lightweight. He did it on a high speed car if I remember@@boduke9428
I look forward to this episode every year. Thank you for introducing me to such amazingly talented craftsman. It's such an inspiration.
Agreed! Thanks for watching!
The Land Rover is awesome. I built a 1/24 post apocalyptic crawler course on my channel turned out pretty cool
Cool!
"What more could you ask for?"
Nachos. The answer is always Nachos.
These builds are nothing short of spectacular. Just amazing work! Thanks to everyone for sharing their talent.
The answer is always nachos... 😂 Thanks for watching and Happy New Year!
The tow truck looks authentically used, abused and old. Yet still carries an air of toughness that only the Land Rovers had. Beautiful work on that one Qfrcy.
Agreed!
Matt, don't sell yourself short man. You did create a steam powered RC. Like button energized.
I took that tip of the CA on the top of the antenna for a build u have. so awesome
That Comanche is absolutely insane 🤯
SBG forum is very inspiring
Agreed! A lot of great inspiration and it's very informational!
Mind blowing talent in this hobby! Awesome works of art! Good job everyone!
Agreed! Thanks for watching!
I’m always amazed at what people are doing with styrene, but Fab1ten’s and RSRC’s metal work really hits me in a warm spot. I love a well machined part or a nicely coped tube joint. Really gets me excited about building trucks!
Glad you liked the video! Happy New Year!
Those twin traction beams on the rsrc future build are beautiful, hope to see those again!
Definitely some impressive builds. Thanks Matt for putting this video together, as well as maintaining the SBC forum.
Glad you enjoyed it!
Ive been watching make it rc lately. The model car stuff is absolutely a throwback to my youth, but every one of these is fantastic level of detail far beyond what used to be done in model cars, let alone rc!
Awesome idea , a Toronto travel run.
More Canadian content of any amount is welcomed .
Great job , great year , great projects by all, thanks Matt .
Happy New Year and stay tuned for the Toronto run. I just hope the weather holds!
Love the Pathfinder!!! Owned the 1:1 of that 2 door model. Took a lickin and kept on tickin. Nice to see actual hand work/creating being done on may of these.
There are so many fantastic builds on the forum and these you have chosen are so over the top. Kudos to all
Agreed! Lots of inspiration on there!
One of the best SBG episodes every year! Phenomenal work all, gives the rest of us inspiration, thank you!
Couldn't agree more! Thanks for watching and glad you enjoyed it!
I wish i had half the talent that these builders have in there pinky finger..... Amazing builds, im honored to just see these builds on your channel 💯 thanks for sharing these rigs, so awesome!! 👍👍
There are definitely some incredible builds! Thanks for watching!
You got me, I joined the SBG forum! Just loved this episode! Great job!!! ❤
Welcome to the forum and thanks for watching!
This is my favorite episode every year
Glad you like it!
Happy f-n New Year y'all tiny truck guys and gals(?)!! Praise wheel. Fun stuff. And better than a poke in the eye with a sharp stick!! 😂❤ Thanks Matt!!
Happy new year!!
Best of luck in 2024 and Happy New Year from Denmark
Happy New Year to you!
Happy new year Matt!
I'm following the SBG forum and RUclips channel for years and it's just incredible to see my own Volvo in the best builds video.
Happy New Year to you too! You deserve it!
Thanks for sharing these inspiring builds. Wow! In awe of the talent! Happy New Year 😊
Happy new year!
Great picks, soo much attention ta detail, dat engine on da Sand scorcher was on another level, da exhaust was amazing 👏 👍 👌 😀
Glad you enjoyed it!
Wishing Matt and all his viewers a Happy New Year. 🎆🙋♂️🎆
Happy New Year to you! 🎉
Fantastic builds. ❤
And Happy New Year to everyone.
Happy new year to you too!
Awesome video Matt happy new year hope to see you on trail in 2024 ✌🏼
Happy New Year to you too!
Great video Matt! and content from SBG is totally the best! ;)
I had a real 1/1 series 3 years... multiple decades ago... and I'm thinking that Quintons build is an amazingly scale build 👍
Thanks for watching! I was blown away again this year by the quality of the work.
Man that scorcher! Then the HM Volvo & nod to headquake👊. Respect, he is amazing. Awesome builds, the whole lot of them.
Thank you!
In awe! I know I’m a RTR guy. I couldn’t even imagine where to start!! Awesome builds
Get you a kit. They're fun. Like a puzzle or Lego set used to be as a kid.
You can do it!
Holy crap that green scorcher was crazy. Im impressed by that guys fabrication skills
Agreed! Thanks for watching!
Thank You for sharing this amazing builds. Lots of respect for the skills and ideas. Very impressive.
Thank You and please go on in the same way in 2024.
All the best,
Stefan
Hi Stefan, thanks for watching and Happy New Year!
Some incredible builds, always crazy to see what some people are capable of these days
Agreed!
I look forward to this video every year. Thanks for taking the time to share these inspiring builds.
Thanks for watching and Happy New Year!
Super high end builds. That talent went into them.
Agreed!
Wow, thanks for sharing all those those spectacular scale builds Matt! Hats off and Happy New Year to you and all the scale builders out there doing the work that we can all inspire to do! Thumbs up and best regards! Happy New Year 🎉🍷🧨🍸🎆🍹🎋🍺✨🥂🎊!
Happy New Year to you too and thanks for watching!
It's a form of art for sure.. and that first one was just 🤯 wow. I have some metal working skills (had to make a complete wing section from sheet aluminum in college), and have much respect for that man's skill and patience. You can see the heart and soul put into that one.
Agreed! Thanks for watching!
Oh wow. I have not seen this other Sand scorcher style buggy yet. Amazing
Thanks to you and Josh for providing me something to look forward to every week. Nice to have good content in the hobby that consumes my life. Happy new year ,Brother 🎉
Thanks for watching and Happy New Year!
Some fantastic builds!
Happy new year to ya Matt ! Love all the content here and your keeping me hanging on to this hobby even when the work schedule says otherwise
Happy New Year and thanks for watching!
Great inspiration to see all these builds. But how do you choose which build to work on?
Such amazing talent! The attention to detail blows me away. 👊😎👍
I’m always blown away by the builds the forum members create! You should share yours there too. Just watched your latest, awesome stuff!
Amazing builds and great video recap. Do we get a montage of all your intros throughout the year? Loved when you did that last year. I'm chuffed to see what you do in 2024🎉
I forgot about that one! Thanks for the reminder!
The QFRCY Land Rover looks real. Possibly the nicest model of anything I've ever seen!
It's pretty amazing!
RSRC build is amazing!! That is some incredible detail and small scale machining!!
Agreed!
Guessing that they probably had the cnc machines first for big projects,,and then got into RC. All these rigs are awesome.
They're very impressive!
Stunning work by everyone. So many good details in each one. It would be impossible to pick out a favorite! I applaud everyone's investment of time into them. Thanks for sharing and Happy New Year!
Thanks for watching and Happy New Year!
On the first build (sand scorcher): It reminded me of home. As a student in Kenya many of my classmates apprenticed on the Safari Rally the name that the East African Safari Rally is now called. (Note there is a race for historic vehicles called the East African Safari Rally in honor of the history of the race).
It's a really nice truck. It's very scale.
That tow truck is absolutely astounding
Agreed!
So nice to read this! Thank you so much! 🙏🏻
Good morning everyone !
Good afternoon!
Really great builds with great details. Happy New Year Everyone! 🎉
Happy New Year to you too!
I haven't posted in the guild in a long time, But its always a great place for info help and idea's. There are so many amazing builds i would not want to even try to pick a top build,
It was definitely difficult to pick the top!
Lots of nice builds and lots of hard work by those folks, awesome!
Yes they are!
Congratulations for all builder's 🎉🤘👏🏽👏🏽👏🏽
That buggy gives me Motorstorm vibes. 👏👏👏
Amazing scale trucks 👍💪🛻 great jobs from the owners
Agreed!
Headquake is the goat
Agreed!
@@scalebuildersguild but these are pretty awe and they are all better than anything I could do lol
Happy New Year. A stunning program and a fascinating review that ends 2023 - in anticipation of the following programs

Thanks for watching and Happy New Year to you!
Thank you for a awesome 2023!!!
Happy new year!
Many thanks, amazing builds, very cool you shared these projects with all of us. May I add, reallly enjoyed your Driftmoossile track action on the Gram, good fun and the circuit looked totally appropiate with all the scale kerbs and the related, let's call it, rc drift track infrastructure.
Happy New Year, top notch SBG selection and display of modelling skills. Thank you and like added 😊
There are a lot of great builds! Thanks for watching and Happy New Year!
I wish I had the patience and skill to do this type of work. Really amazing.
It's very inspiring, that's for sure!
Have a great New Year’s Eve !
You too!
I truly had ambitions of at least submitting an entry into this year's showcase. Maybe for 2024? Some of these builds are just insane!! Thanks for sharing.
Go for it! Thanks for watching and Happy New Year!
@@scalebuildersguild Happy New Year to you too.
Amazing, that is all 👍
Happy holidays to you and your family Matt and happy new year.
Happy Holidays to you too!
Awesome craftsmanship I could only dream of such things! Great channel great builds great content. Keep up the good work in 24, Happy New Year.
Thanks for watching and Happy New Year to you too!
Absolutely amazing builds!!! Every one of these builders is a true artist and craftsman! Thanks for sharing all these incredible works of art Matt!!! Happy New Year everyone!
Agreed! Thanks for watching and Happy New Year!
@@scalebuildersguild Welcome and thank YOU!
Wow. Amazing skills you all have 🎉
Agreed!
"forums are forever"
Me: *pours one out for scale 4x4*
This actually made me chuckle! 😂
Wow! Awesome builds for sure! Happy New Year
Agreed! Happy New Year!
Amazing builds!! I am defiantly going to join the forum.
Go for it! Thanks for watching!
He spelled "Toyota" correctly for what he was making fyi. Love the channel and I didn't know scale building for Rc's was at this level!
Pretty impressive, right? Thanks for watching!
Scalers new year, for you and Josh! ❤
Happy New Year to you!
Saludos Amigo te deseo un feliz Año nuevo muchas gracias por compartir tus videos , te deseo exitos desde Panama , hasta la proxima feliz dia
Love ya buddy. Hope you have a good new year.
Awesome builds. For some reason I get "Page could not be loaded" or "Secure Connection Failed" when trying to enter SBG forum. Do not have these with any other page or forum I visit. Happy New Year!
Odd, seems to be working for everyone else!
Happy New Year Matt!
Happy new year!
Wow, great trucks 🤩
Hahaha matt,s not good sanding his wood 😅😂😅 sorry buddy I could not resist.. happy New Year..
😂 Happy New Year!
Thats one of a great looking RC 👍
Thank you for this. I just added a 6th item to my list
Top 10 builds of 2023🤔
Very cool!!!!! 🤜🤛
Have you ever looked into the 3dsets kits? They are super detailed and fun to build. I’d love to see what you could do with one.
I hate to be that guy but somebody's gotta do it. That's a Series III Land Rover. The plastic grille and fender mounted headlights are the distinguishing features. Although there were some very late Series IIAs with the fender mounted lights, that is rather uncommon and they still had the metal wire grilles.
Yes, I misspoke. But thanks for clarifying for others.
But can they roast weenies? Lol! Great stuff!
Great video !! 🤩💯💢💥👋
Thank you 🤗
Amazing builds.
Agreed!
Smells good in here 👃 😌
Great job all! I saw several rigs with very scale looking instruments & bezels, but I can't find them anywhere. Anybody know of a source for them?
Love it bro.
9:36 You get amazing coping when you have a milling machine on hand. Ask me how I know. 😁
Is this the official 'Last Day of Lexan"?
Yep! Fingers crossed!
Exelente video❤
Gracias!
@@scalebuildersguild The quality of the manufacturers is incredible. I was impressed by the small details and the quality of work on the RCs. Thank you again for sharing this video.
So what is the name of the forum? 😉
Seriously though, thanks for sharing this video. Love seeing these builds!
Ha! Thanks for watching!