I spent 6 hours trying to remove a pin from a Denso 2 pin connector. After watching numerous useless videos, I finally came across yours and I had the connector out in 30 seconds. Thanks for the cutaway view and the effort you took to show us the inside latch clipping the connector in place.
That’s fantastic! I’m glad that it helped you out! Some connectors can be pretty tricky, even if you have the right tools to do them! Good luck on your project!
Over the past two days I've watched about 20 videos 20 times each about getting pins out of the wire connector going to my speed sensor. Countless hours wasted and countless unsavory words exchanged. After this video I got it out the first try you just saved me $45 dollars thank you so much.
Very helpful, I had to de-pin the park-neutral safety switch connector on my honda after a rodent chewed thru the wires. Soldered new wires to pinned wires, plugged back in, started right up
Haha! Thank you. I really appreciate it. If you like this maybe you would like my other wiring videos too? This is my personal favorite! ruclips.net/video/Yz9kqxWkoHI/видео.html
I've watched and rewatched your wiring a car videos. They are so amazing. How ever, only 1 video I watched had the dummy light, and none included those tiny dash lights in the gauge cluster or warning lights. Any chance you could maybe do a video for these? I'm gonna rewire my whole car this month ( 1975 mopar ) and it would help me finish out the rest you haven't covered. Keep the great videos coming.
@Ratty Muscle Car any chance your in Florida? LoL I got a project that I need help with. Due to recent surgeries, I'm limited on my ability to complete her.. 72 Camaro
Also, I'm converting oem head & tails to LED's... Any info or suggestions of anything I may need to add on after I rewire entire car with modern Painless Wiring ATC style fuse block? I got the kit with extra slots for add ons too
@@mobileautorepairs2169 - I am waaaay up here in Massachusetts where the weather is cold and the cars are rusty. Sadly that’s a bit too long of a commute for me to work on your car. ;)
@@mobileautorepairs2169 - you’ll want an LED flasher, but other than that, it should be all the normal wiring most likely. I’ve used the LED flashers from Amazon that are like $8, and they do the job. You just have to make sure they aren’t wired backwards. They only work one way. www.amazon.com/shop/rattymusclecar/list/3LN3FHYBGH
Sadly I think it is different for every car maker, so this information is not in any single place. Maybe I’ll work on building out this information though.
Hey, I've been watching some of your videos. I recently installed LEDs on my bike, and got an LED relay for them. It works, but if I don't take out the blinker pilot light, all four signals start blinking no matter which direction I push the switch. Could you make a video explaining why that is?
That’s because the blinker light on the handlebars is connected to both the L and the R directionals. So when either side is turned on, it passes the power from one side to the other. Normally the switches in steering columns of cars manage that, but if you’re doing something custom, you may need some diodes to make it work. Honestly, I’ve never tried though. So I’m not entirely sure.
Hi, you have a lot of good videos for wiering 👍😀. I planing to wiering my old Datsun and will follow yours. But have you this in paper? When I finish look a video I already forgot what you have done 🙄😁😁
Subscribe To This RUclips Channel: ruclips.net/user/4g63mightymax
See My Wiring Playlist: ruclips.net/p/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh
RUclips is the best cheat code in history. I believe I am officially an ASE certified RUclips mechanic without question.
I’m happy to help you earn that prestigious certification! Thanks for watching!
For real lol! RUclips University!
I spent 6 hours trying to remove a pin from a Denso 2 pin connector. After watching numerous useless videos, I finally came across yours and I had the connector out in 30 seconds.
Thanks for the cutaway view and the effort you took to show us the inside latch clipping the connector in place.
That’s fantastic! I’m glad that it helped you out! Some connectors can be pretty tricky, even if you have the right tools to do them! Good luck on your project!
Same here...well 45min.....lol. guessing I got lucky?!! Haha
Over the past two days I've watched about 20 videos 20 times each about getting pins out of the wire connector going to my speed sensor. Countless hours wasted and countless unsavory words exchanged. After this video I got it out the first try you just saved me $45 dollars thank you so much.
🎉 That’s awesome! Congrats on your success. Come straight to me this next time, and save yourself the stress! 😂
Doing a cutaway of a PLASTIC connector, and still showing the moving clip. Stellar!
Thanks! I’m glad you liked it!
This is by far the best instructional video I've ever seen. The inside view changed everything for me lol
Heck yes! I’m glad that it helped you out! Be sure to tell your friends to subscribe too! lol
Exactly what I said! Incredibly helpful video to see the inner workings of what you're trying to accomplish rather than just "push in and up."
Wow, that was super! You demystified the depinning process with basic tools. You're a lifesaver. Now i won't havee to destroy a pigtail.
Haha! That’s the goal! Thanks for watching and good luck with your project!
The cutaway view was super helpful. I won't be able to see it but I know what to feel for
Yes! I’m glad that you found it helpful. Thank you for watching!
the cut up Part earned you my Subscription @!!!!you went one more Step than the Competition!!!
That’s my hope! Just total domination of the wiring knowledge sharing on RUclips! :D
Best explanation 👌......i froze watching all this videos and after this video i FINALLY GOT IT APART!!!!
Heck yes! Congrats!
@@WiringRescue my wifes hair thing worked great for removing the pins to solder the wires back on!!! Thanks for the tip!!!
THANK YOU for taking the time and detailed explanation. Never knew what I was poking at inside the connector. Made it much easier.
A picture is worth a thousand words , very nice !
Thanks! I’m glad you enjoyed it!
Very helpful, I had to de-pin the park-neutral safety switch connector on my honda after a rodent chewed thru the wires. Soldered new wires to pinned wires, plugged back in, started right up
Best video to learn how to remove connectors
Thanks! I’m glad that you found it helpful!
You are an EXCELLENT TEACHER!!!!❤
Thank you! I’m glad you think so! Feel free to check out my other videos too if you like this one!
You should make a video to show others how to make instructional videos right to the point cant get any better than this THANKS
Haha! Thank you. I really appreciate it. If you like this maybe you would like my other wiring videos too? This is my personal favorite! ruclips.net/video/Yz9kqxWkoHI/видео.html
I just used a sewing needle instead of hairpin and it worked flawlessly
Excellent 👍
I've watched and rewatched your wiring a car videos. They are so amazing. How ever, only 1 video I watched had the dummy light, and none included those tiny dash lights in the gauge cluster or warning lights.
Any chance you could maybe do a video for these? I'm gonna rewire my whole car this month ( 1975 mopar ) and it would help me finish out the rest you haven't covered.
Keep the great videos coming.
Well done, Sir. Well done.
Thank you! I appreciate you taking the time to watch!
Amazing, thank you for sharing these tips. Would be good to have also how to unmount fastons and put new ones
Omg you just saved my day. Thanks!
Great cut-a-way visual … thanks
Glad you liked it!
Snap On Electrical wire removal tool:$40/5 pack
Dollar Tree Bobbi Pin:$1/50 pack
Learning this trick: Priceless!
Haha! Exactly! It also allows you to do this sort of thing at a friends house when your real tools are not available! Thanks for watching!
@Ratty Muscle Car any chance your in Florida? LoL
I got a project that I need help with. Due to recent surgeries, I'm limited on my ability to complete her.. 72 Camaro
Also, I'm converting oem head & tails to LED's...
Any info or suggestions of anything I may need to add on after I rewire entire car with modern Painless Wiring ATC style fuse block?
I got the kit with extra slots for add ons too
@@mobileautorepairs2169 - I am waaaay up here in Massachusetts where the weather is cold and the cars are rusty. Sadly that’s a bit too long of a commute for me to work on your car. ;)
@@mobileautorepairs2169 - you’ll want an LED flasher, but other than that, it should be all the normal wiring most likely. I’ve used the LED flashers from Amazon that are like $8, and they do the job. You just have to make sure they aren’t wired backwards. They only work one way. www.amazon.com/shop/rattymusclecar/list/3LN3FHYBGH
Thanks for such a detailed video. Use your method, I take out the pin without wires.👍
Another phenomenal video, appreciate the content
Afternoon, is there a tell all diagram for connectors and pins or is it hand down from one person to the next.
Sadly I think it is different for every car maker, so this information is not in any single place. Maybe I’ll work on building out this information though.
Great effort 😂 and many thanks for sharing sir ❤
Thanks for watching!
Hey, I've been watching some of your videos. I recently installed LEDs on my bike, and got an LED relay for them. It works, but if I don't take out the blinker pilot light, all four signals start blinking no matter which direction I push the switch. Could you make a video explaining why that is?
That’s because the blinker light on the handlebars is connected to both the L and the R directionals. So when either side is turned on, it passes the power from one side to the other. Normally the switches in steering columns of cars manage that, but if you’re doing something custom, you may need some diodes to make it work. Honestly, I’ve never tried though. So I’m not entirely sure.
Very helpful video and very good idea.
Glad you think so! Thanks for watching!
Do you have a video on using led bulbs? I'm having an issue using the led bulbs seem to feed power back
I do have a variety of videos about LED lights. Check out this playlist, toward the bottom ruclips.net/p/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh
Hi, you have a lot of good videos for wiering 👍😀. I planing to wiering my old Datsun and will follow yours. But have you this in paper? When I finish look a video I already forgot what you have done 🙄😁😁
LIFE SAVER❤
Saving lives, 1 wire at a time! :D Thanks for watching!
You rock man!
Thanks you rock too!
Great video 👍
Thank you!
Great trick
Glad you found it helpful!
Nice 👍
ThNK YOU
Thank you
You're welcome
Can you show how to de pin a motorbike CDI/ control module
Unfortunately I don’t have one available to make a video on, so I’m probably not much help for you. Sorry about that.
"Hair Clip"? . . . Bobby Pin . . . and I believe the Brits call it a kirby grip.
I’m a bald guy, so I dunno what the heck it’s called. Lol. Thanks for watching!
Robert pin…. Bobby pins are for girls. Girls don’t de-pin connectors.
What happens if you break the clip🤦♂️ inside do you have a part number for that clip 🫣
I sure don’t, but wirecare is known to be a reputable company that probably has them. Here is a link www.wirecare.com/
I don't see it on there ☹️
You could also try:
www.waytekwire.com
Make a video how to wire up ford door lock
❤
👍😎👍
Fucking amazing
Thank you!
Thank you, but this is just one style of connector. There are 199 other styles of connectors
G
🎉
omg
I know right?!
Fantastic! Thank you.