Bro....watching you refurb the suspension was the best part for me. Refurbing those shocks was cool as sh#t! Awesome bike man! Love a smoker more than anything!
End result is killer can't deny that!... seen lots of things I would have done differently, and since the tear down went that far I feel there were a few corners cut. Most not noticable to the average person. But to each their own, and like I said, still a killer end result!
I like to share a tip, When you are taking your axle out of your rear wheel you should use the nut to hit against the the axle not just hit it straight on to the axle end with a hammer.
Not trying to take anything away from the incredible achievement of rebuilding this bike, but you could seriously benefit from an impact screwdriver. Those carb screws made me cringe, because I have been there, and I gotta give you props for your vice grip/Phillips head tag team twist! An impact screwdriver is one of those tools you look at in your box 1000 times for every 1 use, but you will thank the stars it’s there when you need it. Love the build, keep it up dude!
I just found you guys and binge watched every Tips and every friday fails...BUT WHY! video, in like a months time. you guys have great content and tons of useful information for everyone.. I would be proud to rock that bike... Bc The MX Factory is a rad! Keep it up..
HD MOTO Foundation typåttetsyttttttyrtttritrttttsryesttyiyyetttisytstyetrstttrttyyettytitytyriiiturtutroyytyetuytruttrtsyettiiyyststyiyrystritrsueysriryiyrttttstsyiyyyeysrytrtysssttytttytttttiryeyityretittityrrsriiyyreyrysrsryeiyetrystyiyttrtsttrrrisyyesrysiytyeiiisriieieiiiuyiiyiuyiuiiiyyeyyeyiiyiyiyryiyiyiysiisioiyiyiiyiyyyiiyiiyytyyiyyiyeisstuytuyyuyiyyytyiytstrrtysyeipsstuyyyseytyiyyrtyuippupu
Damn beautiful process! And the soundtrack was spot on too! Knowing the ins and outs of your machine and those kind of skills of stripping it down to frame and rebuilding it is GOLD!
you know whats more impressive to see rebuild of the 80's 90s 2 stroke basket case most of the 2000 already have the good stuff and easy to find the parts and bolt on just saying
How long did this rebuild take? Side note: I wish RUclips would implement a spot that lists every song played in each video. There were some dope ass songs played throughout this video.
Maybe the engine bottom end gives no trouble on these bikes, but I would like to have had the crank journals, bearings, rod examined. Yeah, more labor cost, but to have it stripped down this far and not do it seems like a shortcut.
I know this is probably a stupid question, but so far I haven't payed a lot of attention to this giveaway. Can it be won by someone from Europe(who lives in Europe)?
How did they just swap out the airbox and side plates like that? You'd think you would need a whole new subframe. Anyone know the name of the company that does them?
I'd for sure enter a few times to win this bike if I was in the US. Decent chances looking at the stats - get your ticket in people - this is too cool to miss!
Can somebody help me. I have a scooter a suzuki street magic. It is over 17 years old. And i just cant get the mud removed from the paint. Any suggestings to how i can get it removed without damaging the paint:) thanks
How do you learn to do this sort of thing? Like knowing every single component of the bike and being able to strip and rebuild it? Seriously where do you learn?
Can you make a video about what the best way to ride through a berm is? every corner is a berm where I ride and all i can find on your channel is ruts and flat ground :/ pls help bc i go to your channel for everything
For someone that is starting off with dirt bikes and works on their own bike. These videos are awesome. You guys turned the YZ into one badass bike.
Agree Whit you 🙂
What a sweet build! I can’t wait to see who is lucky enough to take this bike home!
Cool to see the whole rebuild in a time lapse. I’m in the middle of the same project with my ‘04 ✊
This is very inspiring! I have a 2003. It's very sentimental to me and worth the rebuild. It still runs great! Thanks Mx Factory!
I like that trick you did with those needle nose vise grips, when taking the tighter carb screws. Im gonna apply that.
High Octane Addiction right? I would have never thought of that!
👎
👍
Just get a impact driver, it works great
JIS screw driver works too
Love your education! Don’t fret the trolls that don’t understand the giveaway! Keep it up MX Factory!
Best dirt bike channel i ever watch. Much love 👍👍👍
I'd dare say it's better than the ones rolling off the factory.
Luke Calum Lyonwrath this guys a hack... he didn’t even clean the bearings before putting them back in!
@@mareksumguy1887 olpll
Didn't hone the cylinder either...
Marek Sumguy has
Marek Sumguy has.
you're the man! BEST REBUILD VID IVE EVER SEEN.
I freaking love rebuilding bikes almost as much as riding
isnt it hard it looks very hard wtf
Beautiful work. Whoever wins will have a show worthy bike. Look forward to seeing the winner and future projects.
Like the build on the smoker…love the 2 stroke bikes
Bro....watching you refurb the suspension was the best part for me. Refurbing those shocks was cool as sh#t! Awesome bike man! Love a smoker more than anything!
End result is killer can't deny that!... seen lots of things I would have done differently, and since the tear down went that far I feel there were a few corners cut. Most not noticable to the average person. But to each their own, and like I said, still a killer end result!
It is always a pleasure to watch a build.
Now THIS is a rebuild that can be done by a normal citizen. Great video. Already subscribed to the channel.
I like to share a tip, When you are taking your axle out of your rear wheel you should use the nut to hit against the the axle not just hit it straight on to the axle end with a hammer.
Not trying to take anything away from the incredible achievement of rebuilding this bike, but you could seriously benefit from an impact screwdriver. Those carb screws made me cringe, because I have been there, and I gotta give you props for your vice grip/Phillips head tag team twist! An impact screwdriver is one of those tools you look at in your box 1000 times for every 1 use, but you will thank the stars it’s there when you need it.
Love the build, keep it up dude!
If anybody wants to skip to the part where he puts stuff back on its a min after 15:28
I just found you guys and binge watched every Tips and every friday fails...BUT WHY! video, in like a months time. you guys have great content and tons of useful information for everyone.. I would be proud to rock that bike... Bc The MX Factory is a rad! Keep it up..
I'm going to look really good on this bike. Braaaap!
Dude...that’s Crazy...Well Done!
Great video, and flowing soundtrack.
That was one of the best ones I’ve seen …well done buddy …😎🍻
That bike was already in really good shape it was just dirty
looks better then before now? lol
HD MOTO Foundation typåttetsyttttttyrtttritrttttsryesttyiyyetttisytstyetrstttrttyyettytitytyriiiturtutroyytyetuytruttrtsyettiiyyststyiyrystritrsueysriryiyrttttstsyiyyyeysrytrtysssttytttytttttiryeyityretittityrrsriiyyreyrysrsryeiyetrystyiyttrtsttrrrisyyesrysiytyeiiisriieieiiiuyiiyiuyiuiiiyyeyyeyiiyiyiyryiyiyiysiisioiyiyiiyiyyyiiyiiyytyyiyyiyeisstuytuyyuyiyyytyiytstrrtysyeipsstuyyyseytyiyyrtyuippupu
KJELL TRAKTOR svensk??
@@Eliasverkstad ja
@@kjelltraktor6398 okkilolpliio
There are so many tools you used that I need lol
Same lol
Damn beautiful process! And the soundtrack was spot on too!
Knowing the ins and outs of your machine and those kind of skills of stripping it down to frame and rebuilding it is GOLD!
I did same thing to a 2012 I picked up cheap. Even polished the frame as well..I get plenty of comments of how good it looks and goes
How much did you spend?
Wow looks amazing 👍💪can’t wait for those enduro videos 🔥🔥
Josh Britton Thank you!
Why do I feel high anxiety watching this breakdown? lol
These vids are so satisfying
dude you doing a massive job very nice to look at your work
grüße aus Deutschland 🇩🇪
you know whats more impressive to see rebuild of the 80's 90s 2 stroke basket case most of the 2000 already have the good stuff and easy to find the parts and bolt on just saying
About to get my boy his first bike 3yrs old 😁 would love to get this bad boy for me lol Amazing build guys 🙌 keep it up
I’m thinking about selling my wr450f and getting a older two stroke and rebuilding it,love these videos
When do you stop accepting entries for the bike because it looked like Friday was the last day?
How long did this rebuild take?
Side note: I wish RUclips would implement a spot that lists every song played in each video. There were some dope ass songs played throughout this video.
WHAT A LOVELY BUILD HOPE TO WIN THIS BIKE 💕🤣✌
Old but gold
best rebuild in the world
Thanks for letting me be apart of the giveaway!!! Money well spent!!
I love the suspension part of this video the most.
yz 125 best dirt bike
Ah the good old days of Friday Fails and wheelie tips.
epic rebuild. Great video! God Bless.
It looks pretty cool for a yamaha
MxKonnor7 Thank you!
@@TheMxFactory could you see if you could make a video on how to make ruts and jumps, that would be helpful in my opinion
THING LOOKS SOLID. GREAT WORK
Sooooo sick forreal. Such a gorgeous rebuild.
That's super nice miss my old yz250
Awesome build one hell of a mechanic
What a dope transformation 🙌🏼
Awesome build. Can I ask where you got the tool to compress the rear spring to remove it?
Great video, what would be cheaper? to just buy a new bike or just do a full rebuild of a $1500 bike?
Maybe the engine bottom end gives no trouble on these bikes, but I would like to have had the crank journals, bearings, rod examined. Yeah, more labor cost, but to have it stripped down this far and not do it seems like a shortcut.
Instrumentals on point bro. 15:35 turn up
I don't have a dirtbike and I've been wanting one
These blue rims are so fckin nice i got a 2018 yz 125 and it s the best decision i ever had. The bike is nice to ride and looks just beautifull
Hope I win this bike I really need a bigger bike for the track and I’ve always wanted a yz125
Tune in on the 7th to find out the winner!
Mike Rosa i hope u win it i have a ktm 150 and a yz85
Amazing build!
Came out awesome!
Cyrus Gooding thank you!!
I know this is probably a stupid question, but so far I haven't payed a lot of attention to this giveaway. Can it be won by someone from Europe(who lives in Europe)?
Andrej Enduro if you’re not in town you just have to pay for shipping
What a relaxing thing to see👍🏼
This reminds me I need to go put new coolant in my kx100
This soundtrack real nice!
Wow are you sure the piston is put in right? Thought the arrow was supposed to be facing forward
i know the purpose of the 4 holes in the piston, but are they stock,or did the previous owner/mechanic drill these?
seeing your bike makes me want to rebuild my 1994 rm125
Oh my lord i think i have watched every rebuild video on youtube lol
solid build man, I love it!
Alternative title: "John Cena rebuild dirt bike forks"
omg it does look like him.. jaja
Just entered the giveaway! Fingers are crossed🤘🏻
Hi there! Very good video. I ask you, is the crankshaft of a yz 125 98 the same as a 2001?
How did they just swap out the airbox and side plates like that? You'd think you would need a whole new subframe. Anyone know the name of the company that does them?
So satisfying
Great job and very nice of you to give that away I wish I would have won
I want this so bad I hope I win!! 🤘🏻 good luck everyone!!
The 7th can’t come quick enough!
Amazing job! Awesome video. Thank you very much for sharing such a great quality video. Congrats!
Bike looks greats guys just goes to show that you don’t need a brand new 2020 to have a nice running/looking bike
I have a question... what will you ride without a racing boots?
Did you use the same sub frame for the new air Box
Hi! what is the brush on the drill? thank you 😁
Awesome video!
Amazing job men !
Thanks !
How long did it take to fully strip the bike?
Great work and video
I'd for sure enter a few times to win this bike if I was in the US. Decent chances looking at the stats - get your ticket in people - this is too cool to miss!
Great rebuild! Loved the video!
How do you win the bike? And which country do you need to be in?.Is it open to everyone? Thanks.
It is a really nice looking bike.
where can you find used bikes like this other than craigslist and marketplace
good to see an actual realistic bike build instead of someone dumping $10k into rebuilding a bike.
indeed
My only criticism is that he could have cleaned things way better.
mips if I went to all that effort to strip it down I would have spent a few more hours on the cleaning as well
How much was spent on this rebuild?
@@rztrzt +p
Can somebody help me. I have a scooter a suzuki street magic. It is over 17 years old. And i just cant get the mud removed from the paint. Any suggestings to how i can get it removed without damaging the paint:) thanks
How do you learn to do this sort of thing? Like knowing every single component of the bike and being able to strip and rebuild it? Seriously where do you learn?
Buy a service manual for your bike and dig in.
Where are you located? I would love to have you rebuilt my 01 yz125
djchino Texas
Can you make a video about what the best way to ride through a berm is? every corner is a berm where I ride and all i can find on your channel is ruts and flat ground :/ pls help bc i go to your channel for everything
BEAUTIFUL WORK!!!
Great build but that washer goes above the adjuster but on the steering stem
Hello, good video, I would like to know where to get a tank and other accessories for that motorcycle. I'm from Peru.
Good skills,was like meditation watch the rebuild 👌👍
What we were going for! Namaste 🙏🏼
@@TheMxFactory back at yah,keep up the good work.loving the vids👌👍
I wish I had a bike like that