Bill 2023 😀 Unbelievable, your video was for my 2011 Aquos 70” was outstanding. I followed your simple steps and low and behold the TV came back to life. Not exactly sure what I was doing so was very concerned the first time the TV stayed dead. But the second time it came back to life. For some reason, it did not want to respond to the remote. I did it a third time and the TV responded to the remote and I got it in sync with the other items. . Thanks so much. You saved me a service call and the price of a new bigger TV. (not sure if that turned out like I wanted. Now I don’t have the excuse to get a new TV!)
Worked for my 60 inch. After weeks of looking at the boards for physical damage, and looking at dozens of solution videos, this is the one that just saved me from having to buy a new tv. Thank you very much, sir.
Bought my 60" from a pawn shop. They didn't know the code so they thought TV was trash. I bought it for $100. Your video did the trick! Awesome! Thank you!!!
Thanks for keeping this video available. I needed to reset my Sharp that I bought in 2012. Fortunately, your video was available to walk me thru the steps. Much appreciated!
OMG you are amazing!! My TV was my deceased mom's and I wanted it fixed soooo bad. Your instructions were absolutely amazing. Step by step and picture by picture. I can't thank you enough. You should be charging a nominal fee for the information for those of us who have success. The jubilation in my household was priceless!! Just one quick note, once I got the screen where you select factory initialization, my tv wouldn't stay on so I had less than two seconds to enter the arrow down, arrow right and then enter. Had to be quick! Also, I didn't get the glowing green screen confirming the reset but rather a glowing green "k" followed by the TV set up screen and only then did the screen stop from going black. It's so amazing to think this TV was headed for the trash and quite frankly it's not very old nor was it used very much. My dad bought a new tv for where this one sat so again THANK YOU THANK YOU THANK YOU!!
I had to call Xfinity/Comcast today for a billing issue and while on that call, she said she could lower my bill that had just gone up by $25!! I said yes (to only a $10 reduction) but supposedly to a higher speed internet which is all I have through Comcast. She said there would be an automatic boot and then all would be ok. NOPE!!! My TV turned itself off after a couple of minutes and the damn osb light started flashing alternately with the power light. After a super amount of time wasted googling fixes for this (factory reset) I finally, fortunately came across your video, followed your precise instructions and VOILA!!!! I'm back in business. Someone commented below that you should charge for this - even something nominal because this video has 806,019 views and rave reviews!!! Thank you thank you thank you!!!! Have a blessed 2022!!
Omg you’re my hero !!!! Just did this as a last resort after I was thinking my expensive tv was toast. THIS FIXED IT!!!!! thank you thank you thank you !!!! I owe you a drink next time you’re in Nashville !!!!!’
Thanks...worked like a charm.....wife wanted to go buy a new flat screen...she was extremely surprised when she walked in and saw I had it working again!
This worked great, I've been trying to reset it for a year now because I bought it used and did not have the password.... This worked first try! Thank you soooo much!
I appreciate this info - had 70" Sharp Aquos for 5.5 years, no problem - today this blinking light scenario started - nothing in the manual - your method worked great - Thanks!
Halfway through your vid unfortunately my tv decided it doesn't understand the internet or how to connect to it so I'm here now Man your a life saver this tv is so much faster unfortunately Hulu is still broken but I gotta say since I bought it from my cousin who was across seas and bought it new it's a really nice tv I'll probably get a fire stick eventually
Netflix wasn't working on my t.v., so i called their help number and they said the t.v. needed a factory reset...of course it is a Saturday and the help office is closed at Sharp...i went on you tube and found your video and it worked first try! Thanks so much!
I have the Sharp Aquus LC-60C62U. The TV just kind of got stuck between channels. It showed what channel it was on but the screen was gray and there was no sound. It wouldn't respond to the manual buttons on the TV, or to the remote.These reset instructions worked perfectly, thank you so much.
Lost the audio on my Aquos and couldn't figure out why or how to fix it, thought I would try the factory reset. Only had to complete the first step, input, volume, unplug, then plug in, magically I had audio. Thank you.
Help My name is Israel out of Springfield Ma thank you so much I fanaly got my Tv up and functioning back up again I really thought that it was gone but thanks to god I find your video on RUclips thanks one’s again God bless you
Back in 2007, HD was still kind of new and this was my first HD TV purchased, I hate to admit, at 32", it was $1000! Great TV, I still use it, though it's been downgraded to the bedroom now as my smaller TV. SUPER great on-board sound, especially compared to many other TV's on the market. I've had years of enjoyment out of it, and Sharp is a brand that I'd consider buying again. I've owned 3 Sharp TV's, enjoyed them all. Your reset procedure (which I haven't had to do) reminds me very much of the Android reset on phones. Holding certain buttons and powering on at the same time. I always enjoy your videos!
Hello Sir, thanks for your videos.I have a sharp aquos 70" for 4 yrs and I have no image and the inverted V is blinking 3 /1 times . Please advise if I should try the master reset that you describe in this video.Thanks
Hello bro.I have LC-40LE830U model...1 quick flash and 1 slow flash. Unfortunatly the hard reset procedure (input + ch dwn buttons, or input+vol dwn (of another video)) didn´t work. Is there any other way for this model? Thank you so much in advanced
omg, thanks for this, my volume on the remote just stopped working 3 days ago.I have a 60" that's 3-4 years old-led Aquos.. I called Sharp and was waiting 20 minutes out of 3 times I called. Finally after a rep got all my info the call dropped and couldn't connect for an hour again...so im gonna watch you and try to save $67.50 for a new remote.
Thank you so much for your time and insight and awesome instructions! But this didn't work for me, but I think it's related to the fact that there is an odorless, brown oil colored liquid slowly seeping through bottom center of the frame. There's no possible way anything could have been poured or spilled into it... so I'm assuming its finally kicked the bucket. But I'm still very pleased because it was an awesome tv!
But I will definitely subscribe and kept this linked bc unfortunately I'll be buying another in a few days, exactly like this one and I will need all of your useful tips and info. Thank you so much!
Hi, To press those two buttons at same time is very difficult and to plug TV. AT last I did, however, my screen is all gold red and yellow. The box that appears on the left, I cannot read anything... there is but so light and the box is black.
Sir thank you so so much, this really was very useful for me, it works really works, now my tv sharp is working, I really feel happy thank you again from Perú.
Hi! I have a sharp aquos tv lc-70le740e and the left side from panel ia black. ( left - front view). This hard reset will resolv my problem? Thx so much!
I've done this before and it worked. What do you do if ups follow all of the steps and when you plug it back in (after the second to last step), it just continues blinking and does not turn back on to reset?
What if there isn't the buttons on your TV. Only have a power button have 32" model LC32LE653U. Do you have any info on how to factory reset this model. Im able to turn the TV on but I have to look through a jumpy screen to change channels and what not. Issue is jumpy screen
OMG 😱 THANK YOU SO MUCH You deserved a trophy 🏆 Your video was quick and fast (Str8 to the point) Like seriously: THANK YOU SO MUCH 😊 I’ll definitely give you an upvote/like your video. God bless you !
Hi there. I have a 46" Aquos (LC-46E77UN) which the other night made a flash and then the screen went black, with both the power and the PCS green lights blinking alternatively. I tried the procedure you suggested to factory reset the TV, but nothing happened (ie, the TV turned on when I plugged it in, keeping Input and Vol- pressed, just showing a blank screen and the blinking green lights). Does it mean that the unit is toast? Thanks for answering. F
I have a LC60E69U. Last night my brother pushed a wrong button on his universal remote and changed the input. He couldn't find the regular tv remote so he went to the side of the tv and started trying to change it from there. He hit the menu button and it froze the tv in that mode. Nothing I do will change it. I followed your instructions above for a hard reset but the blue box will not come up so I can't go on. I am furious figuring I have a huge repair bill coming because of him. Do you have any suggestions for me before I have to put out the money?
You and I spoke my email a month ago...did factory reset trick on my deceased moms TV and it has been fine since. Unfortunately, last night the screen went black and it shit off and the green light started flashing again. It coined back up if you turn it off and on but but only for a while.. Any suggestions? Your help is greatly appreciated. Joanne
+Joanne Baptie There may truly be something wrong with the electronics inside. The reset can't resolve a hardware issue, but can help a minor software problem. You may need to have a repair shop check it out and see if it's worth fixing.
I have a Sharp Aquos with no remote. I have a universal remote but when I press enter at the Industry init part it doesn't respond. Is there a way to press enter from the controls on the tv?
Mine is a Aquos 70in I bought in December 2008 for Christmas. It's started doing the code flashing almost 8yrs from the date I bought it. I tried the factory reset procedure and was able to reset it, unplugged and waited 30sec and plugged it back in. unfortunately it didn't turn back on just started flashing again. So I went through the procedure again and this time I did as NumuzicTunes did after unplugging for 30sec (hold power button on TV) when I plugged it back in and this time it turn on and I went through the setup successfully and it turns off & on as it should.. However when unplugged it reverts back to error mode. I'll have to reset every time it loses power. So as long as it doesn't lose power it'll function properly with the TV buttons and the Remote.
I followed resetting factory settings instructions for a 70" Sharp Aquos LRD/LCD. I still have a darker shade on half of the TV. Its a perfect line that separates the darker side from the lighter side. Any suggestions would nor appreciated 👍🏼
I got a 70 inch aquos from my neighbor who was moving. I’m having trouble connecting my iOS RUclips to the tv. Also I don’t have the 4 digit code it asks for on the controls screen, and I don’t have a way to contact my old neighbors. Any suggestions would be greatly appreciated.
Hi my tv is a sharp it’s kind of new, when trying to tune my sky box into it using the coaxial cable ,there is no menu for analog tuning,on other tvs the sky box could be tuned in this way but on this sharp it only shows digital tuning. Any help would be appreciated
My TV stopped turning on and I did a plug-in with channel down and volume down and it turned on. But when it did small white rectangular visula artifacts started showing up on the screen over the image. Can you suggest a fix for this?
LC-70LE847U mine is blinking 1 time quick 3 times slow was hoping that would have done it but nope , any ideas ? would really like to get it working again
I am searching on my computer for a fix, but, my tv is in another room. How can I possibly print all your instructions from the RUclips? My model exactly.
my aquos tv has a different setup in the buttons. it doesn't have an input button but instead it has a devices button. I tried using that but it doesn't work. I'm thinking it's a different button combination. Any help would be greatly appreciated.
Hi... after I hold down the input and volume down buttons and plug the TV back in, light goes solid for a few seconds and then starts blinking again. Do you have a fix for that?
Bill 2023 😀 Unbelievable, your video was for my 2011 Aquos 70” was outstanding. I followed your simple steps and low and behold the TV came back to life. Not exactly sure what I was doing so was very concerned the first time the TV stayed dead. But the second time it came back to life. For some reason, it did not want to respond to the remote. I did it a third time and the TV responded to the remote and I got it in sync with the other items. . Thanks so much. You saved me a service call and the price of a new bigger TV. (not sure if that turned out like I wanted. Now I don’t have the excuse to get a new TV!)
Worked for my 60 inch. After weeks of looking at the boards for physical damage, and looking at dozens of solution videos, this is the one that just saved me from having to buy a new tv. Thank you very much, sir.
briznutz1 I unplugged held input and volume down. The tv flips on and of then the power light starts blinking again.
Bought my 60" from a pawn shop. They didn't know the code so they thought TV was trash. I bought it for $100. Your video did the trick! Awesome! Thank you!!!
Thanks for keeping this video available. I needed to reset my Sharp that I bought in 2012. Fortunately, your video was available to walk me thru the steps. Much appreciated!
OMG you are amazing!! My TV was my deceased mom's and I wanted it fixed soooo bad. Your instructions were absolutely amazing. Step by step and picture by picture. I can't thank you enough. You should be charging a nominal fee for the information for those of us who have success. The jubilation in my household was priceless!! Just one quick note, once I got the screen where you select factory initialization, my tv wouldn't stay on so I had less than two seconds to enter the arrow down, arrow right and then enter. Had to be quick! Also, I didn't get the glowing green screen confirming the reset but rather a glowing green "k" followed by the TV set up screen and only then did the screen stop from going black. It's so amazing to think this TV was headed for the trash and quite frankly it's not very old nor was it used very much. My dad bought a new tv for where this one sat so again THANK YOU THANK YOU THANK YOU!!
+Joanne Baptie Cool, awesome to here and appreciate you sharing your reset procedure with your TV set. You have a wonderful day!!
I had to call Xfinity/Comcast today for a billing issue and while on that call, she said she could lower my bill that had just gone up by $25!! I said yes (to only a $10 reduction) but supposedly to a higher speed internet which is all I have through Comcast. She said there would be an automatic boot and then all would be ok. NOPE!!! My TV turned itself off after a couple of minutes and the damn osb light started flashing alternately with the power light. After a super amount of time wasted googling fixes for this (factory reset) I finally, fortunately came across your video, followed your precise instructions and VOILA!!!! I'm back in business. Someone commented below that you should charge for this - even something nominal because this video has 806,019 views and rave reviews!!! Thank you thank you thank you!!!! Have a blessed 2022!!
I have been toying with this TV and passwords for a year. Dude you nailed it. Awesome work. Thank you very much !!!
I have an older Aquos and your video made it simple. In fact, I did it in complete darkness as my wife was sleeping. Thank you.
Buddy Gau I did it it still does not come on .instead the stand by light cuts off until I unplugged for a few seconds...
Je n'avais plus de son sur mon téléviseur Sharp, et en suivant la procédure de reset, Le son est revenue, Merci tellement
Omg you’re my hero !!!! Just did this as a last resort after I was thinking my expensive tv was toast. THIS FIXED IT!!!!! thank you thank you thank you !!!! I owe you a drink next time you’re in Nashville !!!!!’
Glad I could help!
Thanks...worked like a charm.....wife wanted to go buy a new flat screen...she was extremely surprised when she walked in and saw I had it working again!
This worked great, I've been trying to reset it for a year now because I bought it used and did not have the password.... This worked first try! Thank you soooo much!
+Chris Hamburg Glad it worked for you.
I appreciate this info - had 70" Sharp Aquos for 5.5 years, no problem - today this blinking light scenario started - nothing in the manual - your method worked great - Thanks!
Very good to hear. Glad my video helped!
How do I get you tube to work
@@charleshaas3410thats what im trying to find, connection seems to work but youtube still gives me that no conection symbol
Halfway through your vid unfortunately my tv decided it doesn't understand the internet or how to connect to it so I'm here now
Man your a life saver this tv is so much faster unfortunately Hulu is still broken but I gotta say since I bought it from my cousin who was across seas and bought it new it's a really nice tv I'll probably get a fire stick eventually
Netflix wasn't working on my t.v., so i called their help number and they said the t.v. needed a factory reset...of course it is a Saturday and the help office is closed at Sharp...i went on you tube and found your video and it worked first try! Thanks so much!
Thanks for sharing your experience.
@@dial2fasthey it didn’t work for me any other tips
This fixed the loss of audio on my Aquos sharp in less than 5 minutes THANK YOU SO MUCH! Wanted to add I am 67 yr old female NOT a techie
I have the Sharp Aquus LC-60C62U. The TV just kind of got stuck between channels. It showed what channel it was on but the screen was gray and there was no sound. It wouldn't respond to the manual buttons on the TV, or to the remote.These reset instructions worked perfectly, thank you so much.
Lost the audio on my Aquos and couldn't figure out why or how to fix it, thought I would try the factory reset. Only had to complete the first step, input, volume, unplug, then plug in, magically I had audio. Thank you.
Factory reset worked great, I have sound back now thank you for your video.
Help My name is Israel out of Springfield Ma thank you so much I fanaly got my Tv up and functioning back up again I really thought that it was gone but thanks to god I find your video on RUclips thanks one’s again God bless you
You're a life and buck saver. God bless you man.
can i do this without a tv remote?
Awesome instruction video! You just saved my live! ;) Thank you very much! Greetings from Germany
Thank you for your comment!
Back in 2007, HD was still kind of new and this was my first HD TV purchased, I hate to admit, at 32", it was $1000! Great TV, I still use it, though it's been downgraded to the bedroom now as my smaller TV. SUPER great on-board sound, especially compared to many other TV's on the market. I've had years of enjoyment out of it, and Sharp is a brand that I'd consider buying again. I've owned 3 Sharp TV's, enjoyed them all. Your reset procedure (which I haven't had to do) reminds me very much of the Android reset on phones. Holding certain buttons and powering on at the same time.
I always enjoy your videos!
Hello Sir, thanks for your videos.I have a sharp aquos 70" for 4 yrs and I have no image and the inverted V is blinking 3 /1 times . Please advise if I should try the master reset that you describe in this video.Thanks
Thank you. Bought used tv. Now i can set tv up
Hello bro.I have LC-40LE830U model...1 quick flash and 1 slow flash. Unfortunatly the hard reset procedure (input + ch dwn buttons, or input+vol dwn (of another video)) didn´t work.
Is there any other way for this model?
Thank you so much in advanced
omg, thanks for this, my volume on the remote just stopped working 3 days ago.I have a 60" that's 3-4 years old-led Aquos.. I called Sharp and was waiting 20 minutes out of 3 times I called. Finally after a rep got all my info the call dropped and couldn't connect for an hour again...so im gonna watch you and try to save $67.50 for a new remote.
same issue with same size t.v back working like new hell yea
Dude. You are a genius. Seriously. Worked like a charm!
Hi, I do have a question how can you do the factory reset if I lost the remote control?
Same here. I have no remote
Will that work on a older Sharp Aquos a buddy of mine just gave me this TV and it's about 15 years old
Will this exact procedure work in the UK?
Thank you so much for your time and insight and awesome instructions! But this didn't work for me, but I think it's related to the fact that there is an odorless, brown oil colored liquid slowly seeping through bottom center of the frame. There's no possible way anything could have been poured or spilled into it... so I'm assuming its finally kicked the bucket. But I'm still very pleased because it was an awesome tv!
But I will definitely subscribe and kept this linked bc unfortunately I'll be buying another in a few days, exactly like this one and I will need all of your useful tips and info. Thank you so much!
Useful, I've done the repairing of my 50 inches, 4k Shart TV LC-50UA6800X. Thanks bro.
Hi, To press those two buttons at same time is very difficult and to plug TV. AT last I did, however, my screen is all gold red and yellow. The box that appears on the left, I cannot read anything... there is but so light and the box is black.
Very great this video was grand big. Help for me.
Thanks a lot!!
Sir thank you so so much, this really was very useful for me, it works really works, now my tv sharp is working, I really feel happy thank you again from Perú.
Hola, tengo un LC-70LE847U que tarda en encender la pantalla, despues de eso anda siempre bien. Que puedo hacer? gracias
Uf this worked wonderfully. Thank u!!
Muchas gracias,tu tutorial me funcionó de maravilla!!
Ok thanks anyways could I possibly ask u point r i the right direction xx
You are the best works great. THANK YOU.
I will take some beers with you in gratitude to help me, thank you so much for share you knowledge. 👍... You are the best dude...
Hi! I have a sharp aquos tv lc-70le740e and the left side from panel ia black. ( left - front view).
This hard reset will resolv my problem?
Thx so much!
if I have a vertical line, do you recommend this reset?
is there a way to do that without a remote
I've done this before and it worked. What do you do if ups follow all of the steps and when you plug it back in (after the second to last step), it just continues blinking and does not turn back on to reset?
*..if YOU follow all...
Yesssssss the issue is solved!
It really worked, Even I didnt thought this will work but it solved the problem. Many thanks many thanks
Hi dial2fast..! Thanks for the video. Where I can find the firmware for the Sharp Aquos LC-55E77UN..? Thanks
Really helped me out here in this video thanks
Great job, thank you
Awesome, worked, thanks for your video!
Thanks you very much
dial2fast thank you👍👍👍😉😉
VERY INFORMATIVE. SAVED ME ONCE
Wonderful! Thank you!
Thank you! I could not figure this out. RUclips sometimes screws up something when casting to the TV. This fixes it. Thanks again!
What if there isn't the buttons on your TV. Only have a power button have 32" model LC32LE653U. Do you have any info on how to factory reset this model. Im able to turn the TV on but I have to look through a jumpy screen to change channels and what not. Issue is jumpy screen
Thank you very much for this video. I was very helpful.
....although my buttons are on the opposite side it worked today. Thanks🎈🎉!
OMG 😱 THANK YOU SO MUCH
You deserved a trophy 🏆
Your video was quick and fast (Str8 to the point)
Like seriously: THANK YOU SO MUCH 😊
I’ll definitely give you an upvote/like your video. God bless you !
Hi there. I have a 46" Aquos (LC-46E77UN) which the other night made a flash and then the screen went black, with both the power and the PCS green lights blinking alternatively. I tried the procedure you suggested to factory reset the TV, but nothing happened (ie, the TV turned on when I plugged it in, keeping Input and Vol- pressed, just showing a blank screen and the blinking green lights). Does it mean that the unit is toast? Thanks for answering. F
+Fabio Nero It seems like the power supply in the TV is toast (just my guess). See how much to repair or put it in the trash.
As you power it on after initializing I have to hold the power button in on the tv until the setup menu shows up.
Does this get rid of the youtube freezing problem or other app not loading?
Hi!!!! Does it work with sharp lc-32le631e model ?
Thank you for your help. I appreciate it so much!!😊❤
I have a LC60E69U. Last night my brother pushed a wrong button on his universal remote and changed the input. He couldn't find the regular tv remote so he went to the side of the tv and started trying to change it from there. He hit the menu button and it froze the tv in that mode. Nothing I do will change it. I followed your instructions above for a hard reset but the blue box will not come up so I can't go on. I am furious figuring I have a huge repair bill coming because of him. Do you have any suggestions for me before I have to put out the money?
You and I spoke my email a month ago...did factory reset trick on my deceased moms TV and it has been fine since. Unfortunately, last night the screen went black and it shit off and the green light started flashing again. It coined back up if you turn it off and on but but only for a while.. Any suggestions? Your help is greatly appreciated.
Joanne
+Joanne Baptie There may truly be something wrong with the electronics inside. The reset can't resolve a hardware issue, but can help a minor software problem. You may need to have a repair shop check it out and see if it's worth fixing.
I have a Sharp Aquos with no remote. I have a universal remote but when I press enter at the Industry init part it doesn't respond. Is there a way to press enter from the controls on the tv?
Figure it out?
Boom!! It worked, thank you very much.
Worked great thank you
Thank you so much! you saved me a fortune!
Mine is a Aquos 70in I bought in December 2008 for Christmas. It's started doing the code flashing almost 8yrs from the date I bought it. I tried the factory reset procedure and was able to reset it, unplugged and waited 30sec and plugged it back in. unfortunately it didn't turn back on just started flashing again.
So I went through the procedure again and this time I did as NumuzicTunes did after unplugging for 30sec (hold power button on TV) when I plugged it back in and this time it turn on and I went through the setup successfully and it turns off & on as it should..
However when unplugged it reverts back to error mode. I'll have to reset every time it loses power. So as long as it doesn't lose power it'll function properly with the TV buttons and the Remote.
raul garcia this worked for me also - had to do the extra step of holding the power button before plugging it back in for the last time. Thanks!
I tried this too. Still doesn't turn on.
Works great,thanks
It works , thank you for your help
I followed resetting factory settings instructions for a 70" Sharp Aquos LRD/LCD. I still have a darker shade on half of the TV. Its a perfect line that separates the darker side from the lighter side. Any suggestions would nor appreciated 👍🏼
I had this problem thier is a led inside the TV out or a wire loose
Thx a lot finally find the way
Thank you, works great!
Ty!🎉
Have a question. Does it work if my tv has a power and opc light blinking at the same time?
+Tasileta Ioane-Teo Sorry but I am not sure.
I have a Aquos Quattron and it has red lines on one side, will this work for me??
You are absolutely amazing! Thank you!
I got a 70 inch aquos from my neighbor who was moving. I’m having trouble connecting my iOS RUclips to the tv. Also I don’t have the 4 digit code it asks for on the controls screen, and I don’t have a way to contact my old neighbors. Any suggestions would be greatly appreciated.
Worked perfect, thank-you
Very good to hear. Thanks for sharing!
Hi my tv is a sharp it’s kind of new, when trying to tune my sky box into it using the coaxial cable ,there is no menu for analog tuning,on other tvs the sky box could be tuned in this way but on this sharp it only shows digital tuning. Any help would be appreciated
question please help. my tv screen flipped totally upsided down. will this factory reset help fix the problem?
My TV stopped turning on and I did a plug-in with channel down and volume down and it turned on. But when it did small white rectangular visula artifacts started showing up on the screen over the image. Can you suggest a fix for this?
do you have or know a picture setting for a sharp LC-32le451u I've had no luck in finding one for gaming and TV cable
My sharp tv is zoomed in, will resetting it fix this or would that only be fixable with the remote?
OH EMJEEE!!! you are so awesome!!! thank you!!! thank you Thank you !!!!
Any way to do this without having the remote?
LC-70LE847U mine is blinking 1 time quick 3 times slow was hoping that would have done it but nope , any ideas ? would really like to get it working again
How to you hit enter with out a remote? I see lots of people asking but no answers at all
Did you ever figure this out?
I am searching on my computer for a fix, but, my tv is in another room. How can I possibly print all your instructions from the RUclips? My model exactly.
Thanks
You’re awesome, thank you
I followed all your instructions but at the end the red light still blinking. Is there any options
my aquos tv has a different setup in the buttons. it doesn't have an input button but instead it has a devices button. I tried using that but it doesn't work. I'm thinking it's a different button combination. Any help would be greatly appreciated.
Hi... after I hold down the input and volume down buttons and plug the TV back in, light goes solid for a few seconds and then starts blinking again. Do you have a fix for that?
Thank you so mucu