How to properly install a storm flat roof following all Florida/Miami Dade HVHZ codes!
HTML-код
- Опубликовано: 4 мар 2021
- Paradise Exteriors Uses the Highest quality Flat Installation Products and Process
- Florida code prevents from ponding on a flat roof
- Isoboard System (2 inches of positive slope)
- Replacing plywood (5/8th)
- Ringshank nails
- High end tin tags
- 30 Pound flet
- Fiberglass mat
- 3 Different nail patterns
- Drip edge (3 Inch)
1918 Corporate Dr,
Boynton Beach, FL
9741 International Cr N,
Saint Petersburg, FL
Call us at:
1 - 866 - 478 - 6891
Facebook: / paradiseexte...
Linkedin: / para...
Twitter: paradiseext?lang=...
Instagram: / paradiseext . 
Хобби
Remember to cut the corners over laps in 45 degrees
This was extremely helpful.
Excellent video thank you for sharing.
Why did you not stagger the ISO
The base works a slip sheet to allow movement for expansion an contraction of the roof.
No wood nailer? Metal under the base? No trowel? No target sheet over lead pipe collar?
yeah i didnt understand priming and putting mastic on the drip edge only to put the base sheet on top. i would think base, drip edge, primer, mastic and then cap sheet on top of that.
of course if the cap sheet shrinks from the edge it wont leak under the drip edge the way they did it.
so you put a liftime pipe collar on a 10 year roof
I called you're company after seeing this video cause I thought the Iso Board would be a good additional to the flat roof portion of my home but was told you guys are no longer doing the Iso Boards anymore? Can you guys provide any information as to why you are no longer using these and are there any alternatives to creating some sort of slope on a flat roof?
how do you address the ventilation problem on the flat roof?
Few mistakes I noticed. You did not roll your base sheet and it did not adhere properly. Isoboard is specd to go right on plywood. You should always stagger your nails on drip edge
What’s the name of that pink foam adhesive you are using with the insulation boards?
Very helpful details. Where can one get those foams
You can’t get them anymore because the liberal communists who told us that covid is the end of the world, shut down the supply chain. This company has basically been put out of business
Whats with the dress shoes on the roof? 😂😂😂
No weighted roller to roll iso board down smh not done right
U should alway weigh down the insulation to get proper
target for the lead? got a little messy, overall good job
This is very helpful. What is the minimum thickness of plywood per Florida codes? Is 7/16 OSB ok to use in Florida Code? Or should it be 5/8 with Florida Code? Thank you, very much!
5/8 most of the times
Depends how far apart the rafters are if they’re 16 on center you can do 3/8th I believe if it’s 24 it’s gotta be half inch plus is what I was told but check the Florida building code
For flat roofs by code you should use cdx plywood.Not osb
@@josephtorres383 TY. The roofer had to come and remove the OSB, in the end, and do the flat roof again. It was not up to code in Broward County.
I would use 4x4 edge metal for a flat roof. Edge metal should be nailed in a staggered w pattern.
Im no roofer but I think the black tar oozing out of the edges and joints of the finished white layer looks like crap. Every 747 that flies over can see that lol.
Do CONCRETE roof and you will not have any hurracanes problems but you will not have a job also
Unless building was built with solid concrete roof. You can't use concrete shingle or panels on a flat roof.
@@jacobhairguru215 that is exactly what im saying ...concrete roof...
@@ismelescarpio8149 as a Master roofer who graduated the 4 year trade school to become a Journeyman Roofer/Waterproofer since 1981 i can say without a doubt your " concrete roof " post makes zero sense ,this building wasnt designed to withstand the weight of a concrete system or even a light weight gypsum system ,its residential construction built to a price point ,to put a concrete roof system where you advise would mean tearing the entire porch down & rebuilding the structure with steel ,the modified BUR system installed here over top a fully tapered ISO insulation system is the absolutely correct industry standard roof system for this structure ,the system installed will easily beat the I-90 factory mutual required wind uplift spec so the roof can be fully insured up to 90 mph sustained winds and rain ,the only fault i can find with this installation is the crew wearing clothing for the beach instead of proper boots,long pants & long sleeve shirts ,using a trowel to spread the mastic would do a much better job than the wooden panel but thats a non issue .
@@michaelledford4751 well as a cuban that grow up with hurricanes every year i can tell you that my house in cuba was built in 1967 concrete blocks structure and concrete roof and i wind stand category 5 hurricanes for years...and the house is still there with little maintenance ...this house with the roof system that you mention will never stand a category 5 but yes you have to demolish the whole house to build a concrete roof...
I am a roofer and you guys did a wrong installation
For drip edge installation need a “6” strip of plywood 1/2, and the smooth peel and stick first, low side of the valley has to be attach with screws and bull in the need, white peel and stick has to be relaxing por 30 minutes minimum and the perimeter of tin caps are wrong to idk how pass inspection
That guy taking measurements on an open roof with exposed insulation will cut on fire in 5 seconds got to be a little more careful with those careless guys .. just saying
This was a Hack job .I'd be pissed if I was the home owner
The most garbage install I've seen in a while...