The previous roofing job messed up the corner; you guys did a good job fixing that. And I'm sure the owner must appreciate the extra attention to detail on the threshhold. Hope you get to see your mom! Nas and Allie are a great team/couple!
Hello great job , i have a few questions, can you do this over an existing granulated cap sheet with a low sloping roof?if yes, or would you need to place down asphalt first over the cap sheet so it will stick or do you nail down the base and then put on the granulated roof?
Seems like a practical approach , nothing fancy , his wife and him work well together…whistles n bows are not for everyone …. I believe the work is logical I doubt they will run into too many problems with this build… frugal budgeting whats not to love
I think many of your subscribers would enjoy watching you explain to us when to choose between turbo poly seal and super silicone. I think you could make a very interesting video on this topic explaining the pros and cons of each and perhaps even how Bergstrom compares to other similar flashings. BTW, can super silicone be painted like the poly seal?@@FlatRoofDoctor
Instead of using a torch, what can I use so that the cap sheet will attach securely to each other when they overlap? Is the hand-held hot air again as effective as a torch to melt the sticky membrane?
you call me and we can talk about it. This was a plan in the the past. The training would have included, Torch Down, marketing, estimation, Hiring the right person. Choosing the right job. If we can get 5 people together to want to train then it is worth it.
Here is a link to Home Depots site for the Liberty Cap sheet www.homedepot.com/p/GAF-Liberty-3-ft-x-34-ft-100-sq-ft-SBS-Self-Adhering-Cap-Sheet-Roll-for-Low-Slope-Roofing-in-White-3732920/100031926 Here is a link to Liberty Base sheet builderswarehouse.com/gaf-liberty-sbs-self-adhering-base-ply-modified-bitumen-membrane-2sq.html?gclid=Cj0KCQjw-pyqBhDmARIsAKd9XIODPIeM43Qbarh6KOfTa9Od7X5DZCXBSnNeEkzmylszQR9kJCG9Ay0aAvTdEALw_wcB
@@FlatRoofDoctor That is Polyglass self-adhered roofing. You're supposed to remove the existing roofing. From the current published specs for Polyglass self-adhered SBS roofing: "When re-roofing, *remove all prior roofing materials* down to a clean debris-free substrate and properly close off all abandoned roof penetrations." From the text of the Polyglass 20-year warranty: "The original installation of the roofing membrane must be in accordance with Polyglass current published specifications." That roof could never be warranteed for 25 years.
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!
Yes. The Roof Doctor is knowledgeable and does great videos on roof repair. However, these may all be "Infomercials' for his Turbo Poly Seal. He owns the company that makes it.
I would not have been paid if there was a leak. I billed them 2 months later. BTW, I have been doing roofing for over 40 years. Everyone have there own tricks and methods. Just because I do it a different way than you, doesn't mean it is wrong. Make some videos and show your method. That might be helpful.
I have never left a comment or review on anything until today. I have viewed a few of your tutorials you have about how to do roofing. You are not a professional competent roofer at all. You cannot torch properly and have almost zero knowledge on basic flat roof systems There are so many steps you miss and do not know about that I can’t list them all The customers you do roofs for are not getting any professional workmanship You need to stop roofing on your own and go get hired at a reputable roofing company so you can learn how terrible you are at roofing. I sincerely hope you take this advice as your future customers deserve a roof done correctly Good luck
I’ve been roofing for 43 years and your work is different the way you do things there it’s all scruffy and dirty and you don’t keep things uniform I would sack a roofer if he did work like that I can’t believe people say you do a nice job I’m not slagging you of just the way you do it
Dude these roofs pull away shrimp mk up ,seems pop nails stick out .rubber roofs are so flawed , in a very short time this building will be condemned ,
There are no words for how poor this is. This is the reason flat roofing has a bad reputation among most people. Do this to your shed, not your home or anything you wish to stay dry and leak-free.
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!
Great wife. She earned her trip to go see mom.
Great video
I think the wife deserves 75% of what the job paid.
She was a beast at carrying those rolls up.
What a gem of a wife! Respect from Gaza!
My best wishes to you in the US and your mom in Mexico, from nordwestern germany and thanks for your clips!
Thank you too! thanks for the comment from germany, thats awsome
I love her personality and hard work. Take her to see her mom. 2thumbs up!
She spend 20 days with her mom and just returned last week
The previous roofing job messed up the corner; you guys did a good job fixing that. And I'm sure the owner must appreciate the extra attention to detail on the threshhold. Hope you get to see your mom! Nas and Allie are a great team/couple!
Thanks 👍 The EPDM is known for shrinking. That is what happens in corners and on the side walls
You guys are the best. I am really learning a lot from you. I love watching you work together. Thumbs up for Alie.👍👍
Awesome! Thank you! Allie is going to Mexico soon
Send her to Mexico!! Great job, very clean.
Deal! Thanks my son
I hope you had a good visit with your mom!
This guy is a good roofer. God bless him and his wife.
Happy wife a happy life, she deserve to see her Mom from Brisbane Australia
Great work
Very nice plans and demo and explanations and communication between you and spouse. Thanks
Awesome, I am doing this type of roof myself but I'm going to add a pitch, might as well. Thank you for sharing, best roofing job video!
It is getting cold up there so it is time to go see your mother. Have a great trip.
Thank you, I will
Hello great job , i have a few questions,
can you do this over an existing granulated cap sheet with a low sloping roof?if yes,
or would you need to place down asphalt first over the cap sheet so it will stick or do you nail down the base and then put on the granulated roof?
Amazing! Beautiful people.
Thank you very much
Vaya que mujer tan trabajadora ❤
Gracias
Is the hand-held hot air gun as effective as the torch to melt the sticky membrane?
You guys work great together both of you need a trip to Mexico.
Maybe one day! Yeeeeeh
Great job!
I sent this video to Polyglass and they were completely mortified hahahaha
👍🏼Great job. Your video helped me a lot. Enjoy your trip to Mexico. 🥰🍍🏝
Glad it was helpful!
Leaving tomorrow morning November 8. Thanks for all your support
I saw some guys in another video appling this directly to plywood without the base membrane. How long do you think that will last?
it will last just as long. It is a good product.
😂😂😂 you are amazing guys well done, very nice job and I hope you will get to visit your mother with your husband 😊
She spend 20 days with her mom and just returned last week
shes great!
can this be installed over an existing low sloped flat roof ?
Any roofer with a modicum of professionalism knows what the weather will be.
Nice job you two. You deserve a trip yo see your Mom. Thanks for all the informative videos. They are much appreciated.
Our pleasure! She is excited to go
What is the best DIY material to install over flat concrete roof?
You guys are awesome!!!👍
Wonderful job 🙏😇
Seems like a practical approach , nothing fancy , his wife and him work well together…whistles n bows are not for everyone …. I believe the work is logical I doubt they will run into too many problems with this build… frugal budgeting whats not to love
I love her!
Nice job 👏 👍
How do I decide which to use: turbo poly seal or super silicone seal. Is there a way for me to know which is best for which applications?
most of the time I use Turbo Poly Seal. Super Silicone I use on skylights and EPDM Rubber Roofs
I think many of your subscribers would enjoy watching you explain to us when to choose between turbo poly seal and super silicone. I think you could make a very interesting video on this topic explaining the pros and cons of each and perhaps even how Bergstrom compares to other similar flashings. BTW, can super silicone be painted like the poly seal?@@FlatRoofDoctor
Instead of using a torch, what can I use so that the cap sheet will attach securely to each other when they overlap? Is the hand-held hot air again as effective as a torch to melt the sticky membrane?
Manufacturer actually says not to use a torch, but to use a hot air welder. This guy giving out bad info in every video
However, you only need a welder when it's granule over granule. If it's granule over fast lap then no extra steps are necessary
I love it.
What a great video! Thanks for sharing all of your knowledge
My pleasure! We thank you for commenting and watching
Very nice job
Great job do u doo training for people would like to learn torch down
you call me and we can talk about it. This was a plan in the the past. The training would have included, Torch Down, marketing, estimation, Hiring the right person. Choosing the right job. If we can get 5 people together to want to train then it is worth it.
Good honest job👌 SALUDOS🙏🏻🙏🏻
so sweet ....!!!!!!
Can you tell me how much all of the supplies and materials cost?
Here is a link to Home Depots site for the Liberty Cap sheet www.homedepot.com/p/GAF-Liberty-3-ft-x-34-ft-100-sq-ft-SBS-Self-Adhering-Cap-Sheet-Roll-for-Low-Slope-Roofing-in-White-3732920/100031926
Here is a link to Liberty Base sheet builderswarehouse.com/gaf-liberty-sbs-self-adhering-base-ply-modified-bitumen-membrane-2sq.html?gclid=Cj0KCQjw-pyqBhDmARIsAKd9XIODPIeM43Qbarh6KOfTa9Od7X5DZCXBSnNeEkzmylszQR9kJCG9Ay0aAvTdEALw_wcB
Just search on Google for Peel and Stick Cap sheet and Peel and Stick Base sheet. There are many brands to choose from
Thanks for info
You know he's the CEO of Turbo Poly Seal. Lol.
This type of roofing would never meet building regulation standards in Britain.
I have no clue what other countries do
Dude, it doesn’t mean building regulations over here in America. This guy is a complete scam.😂
Just making it harder for the next guy who gets hired to do it correctly.
not for the next 25 years.
@@FlatRoofDoctor That is Polyglass self-adhered roofing. You're supposed to remove the existing roofing. From the current published specs for Polyglass self-adhered SBS roofing: "When re-roofing, *remove all prior roofing materials* down to a clean debris-free substrate and properly close off all abandoned roof penetrations." From the text of the Polyglass 20-year warranty: "The original installation of the roofing membrane must be in accordance with Polyglass current published specifications." That roof could never be warranteed for 25 years.
@@LoonypapaNot if you put turbo poly sealer on it
the boards are wet an rotten you can't felt over that an ,,do you not use primer
Life es muy Bueno
May Allah bless you
Super hack job
Thanks
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!
She is a great wife ... take her to Mexico for vacation 👍
yes goooooo🤩
👍👍👍
Thanks
Yes. The Roof Doctor is knowledgeable and does great videos on roof repair. However, these may all be "Infomercials' for his Turbo Poly Seal. He owns the company that makes it.
CAUTION: The Flat Roof Doctor owns the company that makes Turbo Poly Seal.
I admire the motivation of homeowners doing some roofing. There’s no way there’s not a leak after a rain like that.
I would not have been paid if there was a leak. I billed them 2 months later. BTW, I have been doing roofing for over 40 years. Everyone have there own tricks and methods. Just because I do it a different way than you, doesn't mean it is wrong. Make some videos and show your method. That might be helpful.
Bro, how did you land HER?!?!?
You realize you married above your level?😁
That's a mess
Wrong. Amigos. U do need a roofing contractor. And licensed. And insurance.. they are experts on this. ....and mush have guaranteed...
I have never left a comment or review on anything until today.
I have viewed a few of your tutorials you have about how to do roofing.
You are not a professional competent roofer at all.
You cannot torch properly and have almost zero knowledge on basic flat roof systems
There are so many steps you miss and do not know about that I can’t list them all
The customers you do roofs for are not getting any professional workmanship
You need to stop roofing on your own and go get hired at a reputable roofing company so you can learn how terrible you are at roofing.
I sincerely hope you take this advice as your future customers deserve a roof done correctly
Good luck
I’ve been roofing for 43 years and your work is different the way you do things there it’s all scruffy and dirty and you don’t keep things uniform I would sack a roofer if he did work like that I can’t believe people say you do a nice job I’m not slagging you of just the way you do it
Dude these roofs pull away shrimp mk up ,seems pop nails stick out .rubber roofs are so flawed , in a very short time this building will be condemned ,
There are no words for how poor this is. This is the reason flat roofing has a bad reputation among most people. Do this to your shed, not your home or anything you wish to stay dry and leak-free.
Slap on some Turbo Poly Seal and you'll be fine
Spot on mate.
I can think of one word. This install is a joke.😂😂
I don't know I have watched this guy a lot a am a roofer his work is good.
I got 8 minutes in and gave up watching.
He has the price of his turbo Poly Seal insanely high. Rip -Off city.
the roof is only as good as the roofer and what I see you do is scruffy work
Prime example of a hack job. Time for him to retire.
❤very good. información
Thanks
I’m wondering where in the states you are doing this type of work? Do you ever consider wind up lift? You are applying peel and stick cap sheet on torch membrane base? So many things point out. Unbelievable!