How to Install Rubber Flat Roof Cheap DIY - Waterproofing seal roof leaks - Tips and Tricks
HTML-код
- Опубликовано: 27 июл 2024
- How To install a Cheap Rubber Flat Roof that will last over 30 years. This video is handy when you have a slightly slanted roof, garden shed, car garage, portico, front entrance, and pet house that needs a roof. My wife and I teach you how to install roll roofing in a few easy steps. Links to follow-up videos are below - This is for anyone, male or female, to learn.
With new products on the market for flat roofs, it has become easy for any handyman or homeowner to install a flat roof himself.
Part 2 - How to Install Door Pan and Skylight Flashing - • Cheap Easy Flat Roof I...
Part 3: How to install Post, Vent, Shingle, and Wall flashing - • Cheap Easy Flat Roof I...
To repair leaks on an EPDM Rubber Roof, watch this • Why EPDM Rubber Roofs ...
Watch this video On how to Repair leaks on an EPDM Rubber Roof - • Why EPDM Rubber Roofs ...
Turbo Poly Seal at bergstromm.com/
Applications where Super Silicone Seal is used: • Use this Flat Roof Coa...
Application where Turbo Poly Seal is used: • Anyone can Repair a Me...
Videos on Repairing Metal Roof leaks: • Metal Roof Coating gon...
Repairing Chimney leaks: • Travelled from Pennsyl...
Skylight Leak Repairs: • Skylight leaking due t...
1. Easy cheap, but a quality roof that lasts over 30 years
2. Anyone, young or old, can do it with no experience ( Best if 2 people do it)
3. Tools Under a $100 - Utility knife, trowel, measuring tape, and propane torch ($30)
4. Materials: Peel and Stick Cap Sheet + Base ( Liberty, Mule-Hide) Spray- Primer, Turbo Poly Seal + Fleece
5. Suppliers: ABC Building Supply, Beacon Building Supply, Home Depot(sometimes)
5. Temperature: above 40 degrees ( not critical)
FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post.
Links to Suppliers:
A. Turbo Poly Seal and Fleece - Bergstrom Industries
B. 1. Liberty Peel And Stick - Home Depot
2. TRI-BUILT SA SBS Cap Sheet
3. Mule-Hide - ABC Supply
C. Torch
D. Utility Knife - Home Depot
Easy and cheap Install a Flat Roof with flashing on a door, railing post, wall, shingle roof, and bathroom vent. This detailed video shows everything there is to learn about installing your own flat roof.
Steps on how to install a Peel and Stick Rubber Roof:
The peel-and-stick method for installing a rubber roof involves using pre-adhesive backing on the rubber roofing material, eliminating the need to apply adhesive separately. Here are the general steps for installing a peel-and-stick rubber roof:
Clean the roof surface: Ensure that the roof surface is clean, dry, and free of debris. This will ensure that the rubber roof adhesive adheres appropriately.
Measure the roof: Measure the roof surface to determine the amount of peel-and-stick rubber roofing material you need. It's essential to order enough material to cover the entire roof surface, including any overhangs or edges.
Cut the rubber roofing material: Use a utility knife to cut the rubber roofing material to the appropriate size and shape for your roof. Be sure to leave an extra inch or two of material around the edges for trimming and final adjustments.
Remove the backing: Starting at one corner of the roof, peel off the backing from the rubber roofing material. Be sure to peel off only a tiny section of the backing at a time, and work in small sections to ensure the material is aligned correctly.
Lay the rubber roofing material: Carefully lay it onto the roof surface, ensuring it's centered and straight. Press firmly on the material to ensure it adheres to the roof surface.
Trim and adjust the edges: Use a utility knife to trim any excess material from the roof's edges. Be sure to leave a slight overhang of material around the edges, which you can trim later for a more precise fit.
Repeat for remaining sections: Continue working in small sections, peeling off the backing and laying the rubber roofing material until you've covered the entire roof surface.
Finish the edges: Once the entire roof is covered with rubber roofing material, trim any excess material from the edges and use a sealant to seal the edges and gaps around the roof penetrations, such as vents or chimneys.
With these steps, you can successfully install a peel-and-stick rubber roof. However, if you're not confident in your DIY skills or your roof is particularly complex, it may be best to hire a professional roofing contractor to handle the installation.
Chapters:
0:00 Flat Roof install Part 1
1:34 Requirement
1:56 Materials needed
3:48 Installing the Base
9:00 Disaster Struck
12:20 Installing a Drip edge
16:46 Installing the Cap Sheet
29:38 Securing Flashing on wall
#flatroof #flatroofinstall #selfstick #rollroofing 
Хобби
You guys are angels on earth. So kind hearted ...
Thanks
Agree 👊🏾so much respect for this guy.
You sir remind me of my dad. Doesn’t do things the conventional way, but gets the job done! Great video!
I wish I could hug you. You and your wife are amazing, amazing ppl. Thank you❤
This is incredibly educational, so generous of you to pass on your many years of experience to DIY owners. Thanks 🙏
Welcome
@@FlatRoofDoctorhack a lot a flat just cause you don’t know how to install EPDM don’t trash it very unprofessional to trash the most common commercial roofing product installed in the USA come to Wisconsin we’ll train ya apprentice Roof walker
Thank you very much Mr. Flat Roof Doctor. I have a 3' x 21' 2-ply peel and stick that needs to be re-done. No contractors are interested so I am having to learn from your videos.
Wow - really great video :) You have a really dedicated assistant too :)) I'm 74 and have to replace my leaky flat roof this summer [650sf+], so I am studying all your videos as much as possible ! Thank you for being such great teachers!
-D
this 2 part videos series alone summer up the whole roof insulation detailing in the same mock up! outstanding work !
I’m not gonna lie the rain made this video even better I love how you show us what happens if you pay attention to the details thank you so much doctor!!!
thank you ! watching this video after following your instructions in the previous videos. I finished my flat roof with my wife thanks to you both.
Glad I could help!
Best RUclips Chanel on Earth 🙂
Thank you
thanks friend
How pleasant and fun to see you again, a big hug❤
My wife and I were super busy and then we decided to build this mock-up roof to make videos. Thanks for your encouragement. Take Care
I may give it a try ! But with knee pads ! Thanks for your inspiration
Your wife has great camera work. Thank you for all the great knowledge!
Our pleasure!
I’m a brand new, 1st time homeowner, and I need to repair a covered & windowed sunroom with aging room :) This is great info!
welcome. BTW, the Peel and Stick would be the best and easiest for that application
Thank you for doing this, is very difficult as a woman to learn things, and you show this very well, thank you
True expert and excellent teacher,and lucky man scored with a great wife
Thank you guys! Huge fan of the channel! Thank you for spotting wisdoms to us young roofers
It’s what I needed to know to do my flat roof. Thank you.
Right from the start i could tell this was going to be one of those videos. Success in life is about your knowledge skills and abilities and this added to those. Thank you
I'm about to do a flat roof on my patio. your videos are exactly what I'm looking for. many thanks for sharing.
You are the best roofer adviser on the earth, you should be my best friend Sory I am in Peterborough UK. Last week I did my flat roof but still I didn't know who to do guetter "gab" and edges
do not understand the "guetter "gab" part. Text me privately 203 858 0080 and I mu=ight be able to help you. Send pics to that number
You should always let cap sheet overhang 1/4 past drip edge because it will shrink
WOW.
Perfect. Thank you
thank you BOTH for this great video ! amazing
This is an amazing video. Thank you for doing this!
That 's a lot of work & materials for teaching, much thanks 💯!!
You guys are so great. I am not a roofer but sooo love your videos, absolutely enjoy them, your sons too. My favorite youtube channel
Awesome! Thank you!
Love 😊the video now I can du my roof job well done thanks great team work take care ❤️😻🙏
Thank you very much!
thank you for the info on how to do my first. roof , kick ass videos A 10+
Gracias por compartir
Thanks for info
Wow u really have a gift fm God
This is perfect you thought of everything.
I was just starting to tap and ask you where did you get that torch and then TAA DAA
Gracias
You are incredible!!!!!
thanks
Yes, I agree . You'll are beautiful people
Mujer trabajadora, no cualquiera carga eso, pero debe cuidarse.
Isn't it better to install the rolls from the bottom of the roof first and then work your way up? This way rain will not flow into the sheet below. I also heard these self-adhesive roll roofing can peel. I've not seen any roll roofing has 30-year warranty.
This is so helpful- thank you! Should you cover up all of the Turbo poly seal with the silver stuff or does it matter?
had it not rain, would you still use torch for the BASE sheet? By the way, I love all your videos! lots of information for us non-roof pros. Thank you for what you do!
Thanks for sharing so much knowledge. They've helped and inspired me to tackle repairing my flat roof.
I have a question. My old house has many layers of roofing. Where the roof meets the wall, the many layers of roof sheeting are built up so much that they come up the walls directly below the drip edge of the camelback coping.
What is the best approach to lay new roll roofing over the existing? Do i remove the old roofing where it meets the wall under the coping so the new layer attaches to the wall well behind the coping edge or do i install the roll roofing up the wall and over the coping?
Thanks.
Thank you sooo much!!! So can I use this system over shingles? ME and buddy wants to start a business in my area doing this cause roofers here are soooooo high. Sooo many roofs has rubber roofs an tar an chip roof an this will work on both. We have a ABC roof company what brand base an the cover you recommend? Thank you !!!
Can we buy the turbo poly seal from local stores other then direct from Bergstromm? I want to buy some but I want to see if I can find it locally. Thanks for the video's, I have a slight slop roof I need to redo, about 800sq.feet and I'm thinking about using the Liberty peel & stick and the cap sheet.
Where are you? It’s so green and so beautiful? Love your videos. Trying to learn from you 👍🏼
Thanks. Pennsylvania USA. This is one of the best areas in the country to live. But 1/2 of the country looks like this, from the middle towards the east. I used to live in Connecticut, 7 hours away from here and it looked the same. This is really beautiful
Where are u filming or located ? Thx for videos
Mistake is good for us, education
Would you come to Winnipeg MB for few days. We need help with DIY flat roof. I would like to use touch down.
Flat Roof Doctor, can you use copper as a drip edge / flashing? Do you have any advice for places that receive snow?
😂🤣🥰😝🤪😜 i don’t have words for describe you guys 😂
Can you lay it on an existing bitumen roof?
Another question; so no nails is needed just peel and stick?
I enjoy watching your videos on DIY Roofing series. I have a question. Can I use the Self adhesive Plybase and Self adhesive CAP on exsting Felt Flat Roof and Rubber Flat Roof or it is limited to existing Modified Bitumin Flat Roof.
I normally do not care what surface I am going over.
Can you put this on a roof that has the heated felt still on it? it is not leaking, but would like to give it a new covering.
i saw my neighbor roofer put down some kind of asphalt cement before cap sheets and its very liquidly because they use a roller to apply. is that common practice for florida area? btw u forgot to show transition from shingles to flat
What type/brand of cap sheets are you using sir?
No harness for safety? 👀 god bless you guys🙏🏻🙏🏻
The lower edge of roof material at gutter board is supposed to be 3"-4" over and down to cover the gutter board. Better start reading the manual.
yes Sir, I will do so Sir. you welcome
Where you can buy this membrane
I feel confident to do my low slope roof,what is the minimum slope for that product?
I looked for this stuff everywhere online and at the roofing stores they nowhere to be found 😒
I have a roof in CT that looks flat to the eye and is a black 10 ft seams wide material covered with a layer of pea sized rocks. It is completely drained after a rain in about 2 hours, and completely dry after 4-6 hours. What peel and stick product will work on this? Most contractors that have looked at the roof have no clue. I want to strip it down, replace any bad plywood than use a peel and stick application only, (no fumes allowed). Any advice from anyone is much appreciated. Thanks
This is great! I'm going to do my own roof. What's the minimum pitch on the roof? Why can't you make the roof totally flat? Can you do a torch down modified bitumen roof totally flat?
Yes, Torch down on a completely flat roof. On the peel and stick, the seams are not as water tight as on a torch down, therefor if it is completely flat and water is pooling on the seams, it could leak
@@FlatRoofDoctor Oh, okay, thanks. I do want the roof to be as water tight as possible so I guess torch down is the way to go. I'm thinking of using some of that tapered insulation stuff to make the roof drain in the direction of the roof drains I plan to install. I'm seeing those things aren't cheap. Three hundred bucks a pop for cast iron. I guess inflation really is getting out of hand.
None of this material is for torchdown,it is self adhering, when you overlapped the seam 12" you should have heated the top of the overlap sheet and hit it it with the trowel to embed the granules into the hot membrane and it would bond much better,but that product is not really for using a torch so one must be careful with it.
Thank you for showing this movie, but do you do outsiders, I live in Rhode Island, and I need a flat roof, mine is of gravel and I have a leak, my husband has copd he can't do it any suggestions?
Yes we do
Hello I am the owner of a duplex I have a flat roof I would like to know if a liquid membrane work and
last in cold climates I’m living in Montreal, Canada
Do you have to have a contractor's license to purchase from ABC or Beacon?
What method / materials do you recommend for a completely flat roof (no slope)?
Torch Down
are you available for consultation? If so how can I reach you.
Hi Doctor
I am from Canada. If you not mind I would like to come visit you in this winter time. Is my pleasure to meet you in person. Hopefully I can learn some techniques from you. I can pay for the tuition.
Let me know
Thanks you
sure anytime
If you are self employed, then there is a lot I can teach you in few days. Not just roofing, but marketing, invoicing, website building and video making, no charge
what is better SBS or APP cap sheet
I prefer APP but I hear that SBS has come a long way and is just as good
Such a nice guy. But I lost count of everything done wrong in this vid.
I would look elsewhere for flat roof tutorials.
Good luck everybody.
Se ve deliciosa la pizza y como se está
Do y’all have family or know anyone in South Texas who would fix my roof??
How many mm for plywood u use for that?
12/18mm ?
1/2" Plywood
Where do you get the Karnak 66?
abc /beacon building products
So you say it will last for 30 years. How many years do you guarantee it for as the best manufacturer guarantee is 15 years and installed their was not your way? Just asking for a friend.
What about the 4 x 4 post didn’t show how to do that
there are 3 videos. I think that is in Part 3 video
@@FlatRoofDoctor Hello your son help me. He instructed me on a flat roof I had to do for my son I love you guys thank you you are really helping the public
I don't know.
This dude still won’t stagger the seams lol
To small to stagger seams on this tiny little roof
Say that to and inspector see what he tells you or the product manufacturer. Unless there are no standards for torching or peel and stick in the USA. I'll teach you something right now please heat your trowel before passing it on the cap that's the number one reason you always make a mess and you job looks like shit. People give you money to have a new roof and it should look good to not like the way you leave it looking. It looks like it was installed 25 years ago.
Maybe you a hake but get the job done everything i watch look good to be i think you need a small drop cloth or small pic of cardboard Maybe cut the box up bring it on the roof good 👍 job put your dirt tools on it
❤👍👍👍👏👏👏💪💪💪🙏🙏
Is your Wife Italian ?. Don, CA. 4-14-2024.
You can't make mistakes but you haven't done anything right. You don't need asphalt primer anything that has baked in paint is the same as being primered and asphalt primer if you were doing touch down witch your not this is peel and stick. You need elastico stick primer or blue skin primer not just on the metal but on the whole roof. First on all the plywood and again on the base sheet before putting down the cap sheet. And you have to stager you base from you cap not just 3 inch overlap. You need half the roll you're first peace of base should have been an 18 inch peace then the rest would be full sheets. The lap of the base should be in the center of your cap sheet. The base should have been cut an inch and a half back from the metal and the cap flush with the metal. Good thing you have been doing this for over 30 years gives me lots of work to redo all those rookie mistakes.
Too many things wrong to mention….38 years in true commercial roofing: Hot Tar BUR. TPO. PVC. EPDM (Rubber) Torch Down. Many styles of Metal roofing.
Did you notice how he told you guys everything he did wrong and you still say he great first the plywood needs glue and the base sheet would never come up or water go under it base always needs glue on the opposite side or it's like maskin tape it sticks and it piles off as a 36 year roofer I wouldn't let this guy do my pigpen
First tell me what material and where to buy, until then all is meaningless.
Yes yes yes Lowe's IS A WASTE OF TIME
agree
I would rather do a roof then cook.... get the heck out of here
First sign that he isnt an experienced roofer... he is his age and still up there all chipper saying how easy it is.. 2nd sign, he doesnt make odd noises when moving around.. please sir, advertise for fabric softener or something but do not dimean the work of us who actually live the life..
absolutely clueless no wonder roofing gets a bad name,
catastrophe, that's not how roofs should be done
I really enjoyed watching your videos!!! Please tell me where I can get a ladder lift because I check Amazon and couple others stores, couldn’t find. Thank you so much! Happy 2024.
hi Flat Roof Doctor, what is the name of store you use to order material ?? I need to order material to cover up flat roof total of 3,000 sq. ft. following your instructions from video, need the karnak for concrete edge, the 66 mode bit the 32 grade drooped edge metal 3x3 in. need the turbo poly seal for flashing the fleece, the base rolls and the top surface rolls , and if you think that I need more things for my project let me know , I am willing to follow your instructions and I promise I would not fail, I have trouble with this leaking of my roof since 2005 and I think I can do it according to your Videos, Thanks so Much in Advance