Hola ya se que ha pasado mucho tiempo pero has logrado realizar el proyecto de la impresora, y si es asi que fuente de cuantos voltios y amperios utilizaste, No sabes cuanto me ayudaria tu respuesta
Hello sir! Thanks for the great project. Is it possible to use the L293d driver here instead of the CNC shield? The difference between them is in driver management software?
bro my servo motor is working means while giving instruction to machine other both motor x and y is working but servo motor is not working bro can u help me replay me soon
Buenos días, muchas gracias por compartir, sería tan amable de ayudarme, quiero reemplazar el servomotor por un electroimán de 5V, pongo un relay pero no me funciona
Hi Bác, em làm theo hướng dẫn của bác chạy khá ok, chỉ duy 1 điều là 2 motor khá nóng sau 1p chạy, phải nói là rất nóng luôn. Bác cho em hỏi đó là bình thường hay cần điều chỉnh gì lại không ạ. Thanks, Bác!
Hey man.. ive built a cnc plotter with the cnc shield v3 and DVR5588 drivers and 2 dvd roms and floppy drive for z axis.. So 3 steppers.. But i cant get it working :( I can connect to UGS with 9600band and move it with the jog controller.. but mostly its superslow or realy not smooth at all... and other moments it is smooth... and when i try to run a g code to plot i get an error message.. Also the steppers get realy hot :/ What could be the problem?
Hey man I can help! First of all it's supposed to be 11500 baud. And for stepper getting too hot...check the voltage reference(just Google it, you'll get it)
When i run the stepper motors seperately it's running.. and when i do it after assembling altogether .. then steppers are not running .. could you please help me out
I have made writing machine and it is running successfully, but when i give words it writes outlines of the word, can you suggest how can i configure to write words without outlines or any other other software to for it.
Is the DVD motors moving front ,back , right,left...if it is moving pls tell me how did u do that....I have done everything as in the video but the motors not rotating...pls help me ...7978864724 pls call me ..
I had audrino now its time to try this😀😀😀 thanks help us alot tonsolve hand writtten assignment if use deep learning and put a camera maybe this can solve complex maths questions as well
Za WaruDIO 🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Can u please say what all things u used from starting
one of the best videos i have watched on explaining how to do it from A to Z. thanks!!
Can u please tell me wht u put on that arduino cnc shield?That green stuff?
Bro can we use a 12v adaptor instead of a battery....
For power source
Hola ya se que ha pasado mucho tiempo pero has logrado realizar el proyecto de la impresora, y si es asi que fuente de cuantos voltios y amperios utilizaste,
No sabes cuanto me ayudaria tu respuesta
Hello sir! Thanks for the great project. Is it possible to use the L293d driver here instead of the CNC shield? The difference between them is in driver management software?
It seems easy, I will try it, thanks for the video
Hi Bro,
What voltage to use for the shield???
the red and blue wires at time 7:47 where did you connect them?
This is the best video for this project
why did use jumper cap in shield v3
What does this cable called?
could you please tell me where from I can thread servo motor which you are using in your video?
bro my servo motor is working means while giving instruction to machine other both motor x and y is working but servo motor is not working
bro can u help me
replay me soon
works great even with the sg90 servo no problem thank you for sharing this beautiful and clear video
Can you please explain me how did you make it?
How much volt did it require?
Where did you get the GRBL code
Please explain me everything🙏🙏🙏🙏🙏
@@_DarkKnight you dont need grbl cod just use program no need. voltage is vorking usb to pc(6v)
Por favor me puedes decir los materiales
Buenos días, muchas gracias por compartir, sería tan amable de ayudarme, quiero reemplazar el servomotor por un electroimán de 5V, pongo un relay pero no me funciona
i tried it is so best and good
What is last blue wire and red wire where you connect that
12 v battery connection
What thread are you using sir
Hi Bác, em làm theo hướng dẫn của bác chạy khá ok, chỉ duy 1 điều là 2 motor khá nóng sau 1p chạy, phải nói là rất nóng luôn. Bác cho em hỏi đó là bình thường hay cần điều chỉnh gì lại không ạ. Thanks, Bác!
plz answer me what is the green small pieces that he uses in cnc
Jumper caps
what are you inserting green in cnc shield in 5:46
This Is Jumper Cap
Jumper cap kis kaam aate he
@@mukulsinghal5926 jumper cap is driver Mai microstepping ke liye kaam aate hai
😯😯😯👏👏👏👏 Brazil creative.
Hey man.. ive built a cnc plotter with the cnc shield v3 and DVR5588 drivers and 2 dvd roms and floppy drive for z axis..
So 3 steppers..
But i cant get it working :(
I can connect to UGS with 9600band and move it with the jog controller.. but mostly its superslow or realy not smooth at all... and other moments it is smooth... and when i try to run a g code to plot i get an error message..
Also the steppers get realy hot :/
What could be the problem?
Hey man I can help!
First of all it's supposed to be 11500 baud.
And for stepper getting too hot...check the voltage reference(just Google it, you'll get it)
Which type of white board you have used???
Can I pls know what items u used and where to buy them
Sir there are heating ishu with the stepper motors any thing we can doooo???
Great work
sari cheeje DVD writer mein se Milegi kya
What is that in green color. In duration 5:40
Looks awesome 👌👏
Can we use normal jumper wire
Where did you connected the blue and red wires from aurnido shield
bro what is the green thing you attached to the CNC shield????
Quick response please..
What is that small green you put in
At minute 7:38 how much voltage did you use?
12
Which battery is used in cnc shield
Is it a dvd player of a car or tv
Where did you get details for the long primer? Did you buy it somewhere?
Can I operate it from mobile?
gefällt mir gut; schöne Idee; werde es nachbauen
Excellent
What is the name of second background music?
Nice work, but isn't it a little bit loose?
Pls tell me I have to make for my Science exhibition "WHICH THREAD U USED" Sewing one or Nylon pls tell sir
brother total kitna kharac ho saktahe
What are these green caps which u put on the arduino cnc?
Does it comes with this
Green caps are as a jumper for mini cnc projects, sometime it comes with cnc shield v3 and sometime not.
How much power we should give to shield
Nên giải thích các loại mạch và cục đen đen (ko biết ic hay transistor)
anyone here who tried this successfully ?
Does it only works with windows 10 computer ???
Can we use sg90 servo motor pls tell
What is that thing which u used first,which you cutted
I installed everything and updated the firmware but i do not get the settings shown at 8:47
Great video congratulations
Assalam o alikum bro. Grate job ....
Bro files can't download, please update download link.
Total budget??
When i run the stepper motors seperately it's running.. and when i do it after assembling altogether .. then steppers are not running .. could you please help me out
same problems with me...steppers are not running
pls help
My motors are running but they are heating at very high temp any suggestions??
@@adityashinde9036 how come your motors are working ?? Why not mine
Thank you! Unreserved file download, your channel deserves our support.
What is the name of the green coloured connector you are using ??
No code is required for arduino????
Without code you can't instruct a microcontroller.
I have a torq bl9180 servo. Groans, but does not turn. What to do? All settings as you have.
I have made writing machine and it is running successfully, but when i give words it writes outlines of the word, can you suggest how can i configure to write words without outlines or any other other software to for it.
Is the DVD motors moving front ,back , right,left...if it is moving pls tell me how did u do that....I have done everything as in the video but the motors not rotating...pls help me ...7978864724 pls call me ..
@@amzadkhan8244 did you uploaded firmware software in it.
Can you please give me the names of the pieces please!!!!!
What is the small green pieces at link is not in description
Jumper
Can I use Arduino uno?
Does it need 2 dvd writer
I like it 😙
where you putted that big red and blue wire you just insert them in 12-36v
please tell me my project incomplete tell me please
Will it work with com8
GOOD 👍👍👍👍
Sir kon si file download karni hai
How much energy it need plz tell fast
What are you using for writing machine like gold and silver rod
very good ....thank's
What was the green small thing
Nice !
Ya sub electrical complaint ka Milenge
Bro could you please display name of the materials you use..............
What is the name for the small pin you use
Bhai ye aapne expansion board me green se colour ka kya lagaya he
what is the name of that electronic component which you are using on the Arduino motor shield (green colour and red coloured) ???
Circuit jumper
Im gunna attempt to make this, ill post again when done, any tips?
dont give up like a did for 2 years mine will be complete tomorow
What is aduino program app..?
Bhai kaun sa jumper wire use hoga
Batao Bahai log
Hw to check if the motors are working. What if they are not???
Creative Chanel...
Super
It will guaranteed work or not
😃 😃 😃
N
i
C
😊😊😊
Sir aap agar apni videos mai materials used likho ge toh acha hoga
I had audrino now its time to try this😀😀😀 thanks help us alot tonsolve hand writtten assignment if use deep learning and put a camera maybe this can solve complex maths questions as well
It's nice project
kya aap channel creative dekhte ho
Nice video. My pen servo motor is not getting any signal for up and down pen at +Z. Solution plz.
What is the voltage given to cnc shield
Great video man 😆. but doing homework yourself is kinda easier lol 😂
Not when you have a massive load of them to do
Alguém importante If you have the brain to build this and program it then doing piles of homework shouldn't be "harder" it just takes a lot of time
Za WaruDIO 🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
Tried ❤️ worked, thank you 🙏👍
What is tge name if the small component that you added to ardiono cnc shild v3 plese replay what that component reply fast
A4988 motor driver with self adhensive heatsink
What is that White board structure you using called?...
it's sunboard
Aap konsi kide matlab konkonsi chip's uos karte ho unka nam Kay he
How much volt is supplied to CNC Shield