These guys do only trailers. And have a record of quality. The wiring is easily accessed and maintained. This is our second trailer from them and haven’t had one issue yet. And we sometimes put our fridge in the trailer. The cover is a truxido cover which locks as it closes and can hold up to 400 pounds of additional cargo. We like that we can have access on 3 sides.
Yup! Whatever the propane water heater temperature is set too the accessory plug is will output that! So yes. Hot water shower from the accessory plug!!!!
We are running the Rugged Bound Penthouse XL and yes we chose to drill through the platform to mount the tent. Better mount and super strong. We used half inch carriage bolts!!!
It doesn't get any better than stout aluminum frame that has been huckbolted. Love this trailer, with the exception of the roll top tonneau cover, rather have an enclosed box and 19" bed height isn't big enough to put my small 45 liter cooler in it and close it. I'm really scheming to build my own, if only huckbolt guns weren't $2500.
@@OverlandPioneers Oh, I thought the tray was their basket style not the platform style. What do they put on it if you don’t get the pioneer tray? Thanks!
Ok. Thanks for engaging. Clearly not bare bones. And try and build it for that including labor. Engineering. Tools. Testing. Aluminum. Electronics. Overhead. Profit.
It’s actually very organized. The ratsnest of wires your seeing in the bottom of the box is the 20!!! Feet of wire that comes off the Noco sure power controller. Wish it wasn’t so long.
Dang that’s a sick trailer! It has all the things my trailer is missing. I love the kitchen and spare tire carrier.
Yes please! 💯
And that studio is 🔥🔥🔥
@muddyruttzz I like the fact the XVenture Trailer comes with a Dexter Axle. Stout axle, plenty of clearance and parts are available everywhere.
Another quality video from Overland Pioneers and Jeremiah.
Nicely done video. I like the improvements to the trailer.
I think I want a trailer now. 😳
I’m so getting a x-3 one day!
Worth every penny! Buy once cry once!
@@OverlandPioneers absolutely! Can you give us an idea of what a trailer, configured just how you show, would cost?
Wish I could buy one of these in Australia.
If you have a RTT, how do you level it on a slope? Best to decouple from truck?
Either using maxtrax or similar board or yes unhook. And use the tongue to level
Great video!
Trailer looks the part but the electrics are quite messy, no fridge and the tonneau cover is a put off.
These guys do only trailers. And have a record of quality. The wiring is easily accessed and maintained. This is our second trailer from them and haven’t had one issue yet. And we sometimes put our fridge in the trailer. The cover is a truxido cover which locks as it closes and can hold up to 400 pounds of additional cargo. We like that we can have access on 3 sides.
I at first was hesitant with the roll top but it really is handy!
@@OverlandPioneers great feedback, thanks!
So you can connect a shower to the other side with the extra water connection?
Yup! Whatever the propane water heater temperature is set too the accessory plug is will output that! So yes. Hot water shower from the accessory plug!!!!
@@OverlandPioneers Nice! So really just need to connect a handheld sprayer with an on/off switch right?
@@appalachianventure3920 it comes with a shower head with a on off!
@@OverlandPioneers Thanks! Love what you guys do! I hope I see y’all out there on the trail one day.
Such a sick looking trailer 👌🏽
Really loved it!!!
With the almost 110” wheelbase of the 4Runner, which do you think would perform better? The XV2 or XV3?
Completely personal preference. They are both relatively light weigh. The big difference is cargo area and on the xv2 the telescoping top
What kind of RTT are you guys running? Did you have to drill into the platform to mount it?
We are running the Rugged Bound Penthouse XL and yes we chose to drill through the platform to mount the tent. Better mount and super strong. We used half inch carriage bolts!!!
It doesn't get any better than stout aluminum frame that has been huckbolted. Love this trailer, with the exception of the roll top tonneau cover, rather have an enclosed box and 19" bed height isn't big enough to put my small 45 liter cooler in it and close it. I'm really scheming to build my own, if only huckbolt guns weren't $2500.
I would be all over this if the price wasn't obnoxiously more than double what it should be.
Design one. Buy all the tools and materials. Build it for what you think it’s worth and let me know how that turns out.
Does this trailer have the rhino pioneer tray? I’m pretty sure it doesn’t.
It does.
@@OverlandPioneers Oh, I thought the tray was their basket style not the platform style. What do they put on it if you don’t get the pioneer tray? Thanks!
@@Appalachianventure simple cross bars if you don’t get the pioneers platform.
@@OverlandPioneers Cool, of course you guys went with the PIONEER tray! What was I thinking?
Wow...sharp...um...i'll take 1 please...lol
Price?
Price is very throughout the years you need to reach out to them outfit it the way you want to to get the quote?
$17 large for a bare bones solid axle trailer??!!!! I don't think so.
Ok. Thanks for engaging. Clearly not bare bones. And try and build it for that including labor. Engineering. Tools. Testing. Aluminum. Electronics. Overhead. Profit.
Price seems ok. Not a cheap buy but what you get seems fair
I feel the wiring could be a lot better..
It’s actually very organized. The ratsnest of wires your seeing in the bottom of the box is the 20!!! Feet of wire that comes off the Noco sure power controller. Wish it wasn’t so long.