Mine started doing this last week while i was burning brush piles and cutting trees down to a more easily burnable length. It was lightly raining, so i thoght that may have something to do with it, but it sounds like this may be it. Thanks very much for this video. Also, I like your shop. I see the logs for columns, and our place is all pine and cedar, and the neighbor has a portable saw mill. I think I just decided to scrap the idea of a metal shop building (retired Ironworker here) and go "natural". Thanks again! Lee Butcher
MANY thanks!! I’m only used to working on Huskvarna and other Swedish brands and the Stihl had me baffled as it wouldn’t run after I’d gone through the carb like normal. Took a break, watched some RUclips vids and then found yours. Went back to the shop and bam! This was it. Saw runs great now, my uncle will be happy
Pete get yourself a set of those surgical forceps ..... You can get an assortment of 10 in different sizes and straight and cropped for about 12 bucks. Money well spent for making jobs like that a lot easier. Instead of just poking about with wires and screw drivers, you van get in there and get hold of things like those little fuel hoses and escaped little ups etc.
Hello. Please tell me for me, why does my stihl ms 260 throw a lot of gasoline through the round screen in front, the top of the carburetor and drowns immediately after starting the chainsaw? New cylinder kit, new carburetor, new impulse hose. Can you help me please?
are the 260s supposed to 4 stroke on wide open throttle with no load? i just picked one up and the high is at the upper limit... wondering if i need to take the limiter off thnx
It is running strong the only thing that happened was the flywheel dog screws came loose and destroyed my recoil. Easy fix but in hindsight I would have removed the screws and put Loctite on them. It’s not so much of Saws problem Then an assembly problem. the chainsaw was assembled and they didn’t put Loctite on the screws. Still would recommend the saw it’s absolutely my go to saw. have a good one man
Message from over in the limousin in france, your help is much appreciated this side of the water too.Thanks very much, you nailed the problem.
Mine started doing this last week while i was burning brush piles and cutting trees down to a more easily burnable length. It was lightly raining, so i thoght that may have something to do with it, but it sounds like this may be it. Thanks very much for this video. Also, I like your shop. I see the logs for columns, and our place is all pine and cedar, and the neighbor has a portable saw mill. I think I just decided to scrap the idea of a metal shop building (retired Ironworker here) and go "natural". Thanks again! Lee Butcher
Didn’t even know I had a pulse line! 😅 Just checked and it’s connected! Thank you, sir! Will be subscribing!
That’s exactly how my MS260 Pro running now. Glad I ran into your video.
I had indeed exact the same issue, just right now.
Thanks to your information video, Icould solve it. Many thanks!
That was an easy fix. Helps when you know what to look for. Later Pete
MANY thanks!! I’m only used to working on Huskvarna and other Swedish brands and the Stihl had me baffled as it wouldn’t run after I’d gone through the carb like normal. Took a break, watched some RUclips vids and then found yours. Went back to the shop and bam! This was it. Saw runs great now, my uncle will be happy
I’m glad it helped. Thanks for watching.
Pete get yourself a set of those surgical forceps ..... You can get an assortment of 10 in different sizes and straight and cropped for about 12 bucks. Money well spent for making jobs like that a lot easier. Instead of just poking about with wires and screw drivers, you van get in there and get hold of things like those little fuel hoses and escaped little ups etc.
Hello. Please tell me for me, why does my stihl ms 260 throw a lot of gasoline through the round screen in front, the top of the carburetor and drowns immediately after starting the chainsaw? New cylinder kit, new carburetor, new impulse hose. Can you help me please?
thank you bro
are the 260s supposed to 4 stroke on wide open throttle with no load? i just picked one up and the high is at the upper limit... wondering if i need to take the limiter off thnx
I connected the pulse line but it still dies after I start it any help would be great
Can you please explin me what is that washer for on 1:12 ? I have one 026 with straight washer and one 026 with bent washer.
It’s just to hold the bushing in place I reckon
How does that come off?
It seems to happen when they pull on the saw when they get it stuck. Thanks for watching man
How’s the husqvarna clone saw holding up
It is running strong the only thing that happened was the flywheel dog screws came loose and destroyed my recoil. Easy fix but in hindsight I would have removed the screws and put Loctite on them. It’s not so much of Saws problem Then an assembly problem. the chainsaw was assembled and they didn’t put Loctite on the screws. Still would recommend the saw it’s absolutely my go to saw. have a good one man
Message from over in the limousin in france, your help is much appreciated this side of the water too.Thanks very much, you nailed the problem.