How to build 8x faster item sorters WITHOUT clogging! ✨ Minecraft Tutorial | Tileable | Minecarts

Поделиться
HTML-код
  • Опубликовано: 21 янв 2025

Комментарии • 751

  • @TheBlackBeltPanda
    @TheBlackBeltPanda  3 года назад +53

    Hope this tutorial comes in handy! If you've made any improvements, or have any questions, feel free to post them here in the comments!
    Also, if you haven't seen it, yet, be sure to check out my Redstone Bathroom! ruclips.net/video/60Dge2rEx1U/видео.html

    • @originaljimmy0119
      @originaljimmy0119 2 года назад +1

      Please help no matter how I place the decor rails and the activator rails they connect to each other and I have to skip a block and can't put them side by aide

    • @jonathonsissom6655
      @jonathonsissom6655 2 года назад

      @@originaljimmy0119 build it turning the whole build 90 degrees to the right or left. I believe by default the rails are laid down north and south so if you have your build facing east and west then it will be a pain to try and get the activator rails to not reconnect

    • @originaljimmy0119
      @originaljimmy0119 2 года назад

      @@jonathonsissom6655 have already tried this it doesn't matter they still connect and lay flat it is still a great system just can't build it side to side

    • @jonathonsissom6655
      @jonathonsissom6655 2 года назад +1

      @@originaljimmy0119 just make sure the front of your chest is facing either north or south and you should be good. the way that top activator rail should be running is east and west

    • @originaljimmy0119
      @originaljimmy0119 2 года назад

      @@jonathonsissom6655 have tried that it still doesn't fit side by side

  • @ferociousbus2562
    @ferociousbus2562 2 года назад +163

    I have spent roughly 8 hours trying to design something like this, and I finally found the missing component, inclined hopper minecarts! Thank you so much!

  • @Ph3nomen0N
    @Ph3nomen0N 2 года назад +81

    Man, the way you explain the problems at the beginning with the different builds is PERFECTION!! Well done

  • @rafaelrc29
    @rafaelrc29 Год назад +24

    A minor improvement to solve item speed on ice issue:
    If you put a bottom slab instead of the trap door, the items kinda "stack" as they hit each other (if the same type) while hitting the slab, until they float high enough to pass above it. As slabs are not a full block, items still slide on it if there is an ice below.
    You just saved my server from the lag of my mobtrap, thanks!

  • @troybarrios2814
    @troybarrios2814 2 года назад +30

    Built this in my bedrock realm and was able to use the single wide design but was required to space each one by one block because of the Cardinal direction default rail snap mechanic can be done but only in one direction, corners become quite challenging to fix. Also note that anywhere you place a vertical hopper you can instead use a hopper minecart to give you an overflow buffer for your system

  • @cobracao1327
    @cobracao1327 2 года назад +18

    How does this not have more views! I've been trying to figure out how to fix the overflow problem with the standard design for a while now! This looks perfect, can't wait to try it. What kills me on the base design, if you try the water delivery and one of the sorting hoppers gets full it can flush all the surrounding hoppers because of the redstone signal. This will be a huge fix to a massive mining project I have.

    • @Onefishygal
      @Onefishygal Год назад +4

      If a hopper getting full is flushing other hoppers then I think you've built it wrong. the maximum amount of items that can be in the hopper should be 68, 68 items gives off the same signal strength as 46 items so it should be impossible to have a hopper flush adjacent hoppers unless you have extra items in your filters.

    • @scarletwolf_tb
      @scarletwolf_tb 7 месяцев назад

      Ya the way to avoid accidentally flushing surrounding hoppers, put in 44 |1| 1| 1 |1 (me forgetting how many slots r in a hopper good gracious).

  • @Shatzie.
    @Shatzie. 3 года назад +14

    Thanks a lot for this design, was exactly what I needed for my gold farm where single hopper speed was simply too slow and the system got clogged in like 5 minutes with rotten flesh/gold swords. I used the 2-wide design and added extra storage with double hopper speed. I also didn't tilt the hopper minecarts on detector rail, because my design needed it to pick up items from both sides of the item stream - this didn't cause any issues and the hopper minecart below still sucked the items into the storage chests. As I built this in the nether I used sn ice path with sticky piston and slime block to push the items to the sorters while using two droppers spitting out the items in front of the piston. When doing this design make sure to prepare enough space, I had several issues I had to overcome because of lack of space and was too lazy to rebuild everything on platform few blocks below.
    Will definitely upgrade some of my sorting systems with this whenever I need extra speed.

    • @rolandtoth7398
      @rolandtoth7398 2 года назад

      But how do you get the items in th dropper without them clogging?

    • @Shatzie.
      @Shatzie. 2 года назад +1

      @@rolandtoth7398 I had droppers from each kill chamber connected to piston push system. Single hopper speed was enough for single kill chamber

    • @rolandtoth7398
      @rolandtoth7398 2 года назад

      @@Shatzie. what farm did you use this?

    • @Shatzie.
      @Shatzie. 2 года назад +1

      @@rolandtoth7398 Ilmango's gold farm, Piglin bartering farm and Ianxofour's stacking raid farm.

  • @jimmer411
    @jimmer411 16 дней назад +1

    I learned more in this video than i have from any other RUclipsr. Chest centering streams, hopper minecarts being used as item filters and trap doors to keep items from being yeeted is invaluable info

  • @danielwood9220
    @danielwood9220 2 года назад +6

    Currently building this farm in 19.3 and man this system is sweet. It also saved my ass. I was building Eyecraft's farm and I cant tell you how many issues i had: whether it's severe lag or the system simply breaking and me having to go in and fix it every time. This sorter can handles so much volume, don't have to worry about messups any more! this design was also very easy to fix over my old storage build that was barely working. Also added 4 chests below for extra space
    Thank you so much for the straight forward and easy tutorial!

    • @danielwood9220
      @danielwood9220 2 года назад

      Quick question: is there a way to sort items that aren’t in bulk? Or do I have to put in 64 of every item I want to be sorted

  • @lukidon8715
    @lukidon8715 3 года назад +77

    I used to play on your server, I started watching you when I was 9, and I'm almost 17 now, lol. I still have pictures of my old Island from Pandacraft. Hope you're doing well.

  • @av2678
    @av2678 2 года назад +6

    Dgmw but i never thought i would watch an 18 min video just for a sorter system. Really nice video and good explanation.

  • @chicabomb5933
    @chicabomb5933 2 года назад +11

    amazing design! quick tip for my OCD bros, use 3 glass pane/iron bars to align the minecart perfectly centered

  • @vbolet
    @vbolet 6 месяцев назад +2

    Thank you for including explanations for how the mechanics of the system work. A lot of other videos just show you how to build something - you taught me how it worked along the way and I really appreciate that!

  • @deskmat9874
    @deskmat9874 8 месяцев назад +4

    Thank you so much for this, i dont think i've ever learned so much from just 1 minecraft video before

  • @KZArchive94
    @KZArchive94 Год назад +5

    Ingenious! This is great, man! I'll have to use this the next time my buddies want a sorter. I always build the machines haha

  • @johnroberts2681
    @johnroberts2681 3 года назад +7

    Cracking idea. Never knew mine cart hoppers were so much faster.

    • @TheBlackBeltPanda
      @TheBlackBeltPanda  3 года назад +3

      They sure are; it's very impressive watching them drain an entire double chest in just a couple minutes lol

  • @AaronGerry28
    @AaronGerry28 2 года назад +8

    Thank you! works perfectly on my gold farm on 1.18.1.
    oh a little thing to keep in mind, remember that in the minecart below there are activating rails, not powered rails... I lost half an hour with this problem because the filler blocks were absorbed instantly hahaha

    • @twtvabalke
      @twtvabalke 2 года назад +2

      haha I had this issue too! Did you build many slices next to each other? Any issue with the bottom hopper minecarts popping off the rail onto the powered rail on the slab behind it?

    • @immu149
      @immu149 2 года назад

      what did you use to transport the items?

    • @AaronGerry28
      @AaronGerry28 2 года назад

      @@immu149 I connected the hoppers of the gold farm to two droppers that turned on when they detected an item and the items fell into an ice transport system that lined them up so that they passed over the top of the item sorter.

    • @immu149
      @immu149 2 года назад

      @@AaronGerry28 u used string to detect?

    • @AaronGerry28
      @AaronGerry28 2 года назад

      @@immu149 Not for droppers, I put a detector in the hopper before the dropper that sends a signal to turn on a fast clock that makes the dropper drop everything inside it.
      When the items fall, they do go through a string but that is already to turn on the ice transport system

  • @areksoo
    @areksoo 3 года назад +7

    Thanks for the design. I used it when remaking my flower farm (due to flower pattern change in 1.18) to separate out the seeds and flowers. I didn't use droppers, so it was a big clump of items hitting the sorters at once. While I still made the water cycle, the amount of times it cycled was far less.

    • @ZenMasterSloth
      @ZenMasterSloth 3 года назад

      @areksoo so I'm curious. How did you prevent the items from overflowing, or should I ask, how did you collect and distribute your items into the sorter from the flower farm. I'm working on a flower farm that cycles on and off and has a flying machine that pushes all the items into a ice stream each time the farm cycles off and I find that even if I only run it for like 10-12 seconds at a time there are still too many items too fast and it overflows the sorter.

    • @stoneworld5962
      @stoneworld5962 Год назад

      @@ZenMasterSloth one year later but who knows, maybe it helps someone else ? Adding more sorters allowed for the overflowing items solve the problem. Since the flower farm also produces shrooms, you can use the shroom sorters for the yellow flowers and seeds instead - just replace the items in the sorters, no rebuild or adding, this way. at the end I made a bonemeal farm with minecart hopper distributing to 5 composters, it helps refeed the machine.

  • @goon_324
    @goon_324 2 года назад +25

    For anyone wondering this does work on bedrock, the only downside is that you can't place them side by side because of the how the rails connect, so you'll have to space them out by at least 1 block

    • @dilloncox1299
      @dilloncox1299 2 года назад +1

      How do I do it?

    • @Random_user_8472
      @Random_user_8472 2 года назад +2

      @@dilloncox1299 Place a block, skip the next, then place another block.

    • @jaimefdez7
      @jaimefdez7 2 года назад +3

      You can actually make it, but you have to orient it in the corrent way. I mean, you have to test it in some orientation and if it is not working just rotate the system by 90º and it should be fine

    • @shitpostmania6061
      @shitpostmania6061 Год назад

      You can actually do it by placing a two rails in the direction you want and then do same pattern. Then remove the rail connecting them.

    • @johnpfeilsticker5870
      @johnpfeilsticker5870 3 месяца назад +1

      So I just built a row of these (one wide version) in bedrock, tiled, but I ran into a massive problem.
      The minecarts down below are pulling from their neighbors. Specifically I built the individual filters with chests facing west and tiling north-south. Now each tile/filter dumps the filter items from the tile to the south every time it activates. Seems like a minecart bug or something but I'm really sad because I spent ages messing with the rails to make it tile.
      Instructions in the video didn't quite work for rail placement in bedrock, but with enough fiddling I was able to build it one wide and tiled. This bug tho...

  • @lukerumsey7093
    @lukerumsey7093 10 месяцев назад +1

    OMG!! you are a life saver!! i have a system in the end which because auto concrete factories didnt work in 1.20.1 (turning concrete from sand duper into concrete automatically) i had to auto sort the concrete from sand i was duping and then put it into a manual concrete converter and with 2 of the 36k duper farms running it immediately backed up completely! the storage system i had didnt back up too badly cause it was designed for bulk items but because of where i buil the concrete farm i only had about 4 blocks and a single circular hopper didnt work. thank you so much!!!

  • @Aaaaaaaaaaaaaaapj
    @Aaaaaaaaaaaaaaapj 10 месяцев назад +1

    this is so helpful for my absolutely ridicilously overpowered raid farm in my hardcore world, thank you

  • @lukejbonner
    @lukejbonner 5 месяцев назад +3

    Awesome video, man! Super helpful. Been referring back to it lots! You made a comment that you can use a regular rail, but I tried it and it curves into a corner rail, so I think Activator Rails are still best for the middle level.

  • @AntOfThy
    @AntOfThy 2 года назад +4

    Thank you this is a very handly sorter for bulk storage systems...
    However... There is one small fault, which is a problem for ANY water stream feed sorter (not just yours). If there is a whole stack of items (64 items) then no single
    sorter will pick up the whole stack!
    You will need at least 2 sorters to pick up
    a whole stack. But at least your sorters reset fast enough that you don't need 3 or more sorters to handle such a load!

  • @ewwicorn1173
    @ewwicorn1173 2 года назад +1

    Thank you too much, it was the best desicion for some minecraft servers to avoid bug and lags of hoppers, your design based on minecarts with hoppers solved my problem. Thank you too much again)

  • @diegoteclas
    @diegoteclas Год назад

    Dude. you just broken the Mojang game limits! i thought the only way was making many lines of traditional sorters. but here i´ve learned something new

  • @rubics996
    @rubics996 21 день назад +1

    this design is incredible. works flawlessly, using it for Ilmango's overworld mob farm.

  • @akaFengg
    @akaFengg 3 года назад +2

    It's great to see you back!

  • @indoorjetpacks
    @indoorjetpacks Год назад +2

    brilliant. was looking for a way to improve my gold farm to not have nearly as many sorters just to fill shulkers and this looks like it'd do it, and i can see myself using it in other farms too, if not my actual sorting system. definitely subscribing based on this :D

  • @PlasmaHH
    @PlasmaHH 3 года назад +7

    You can stack down in a similar way more minecarts to buffer, or if you have enough hoppers reposition things so that two hoppers pull and feed through a chain. with bedrock you need to make sure that you don't accidentally put things on a chunk border since minecarts and chunk loading/unload in that version is very buggy.

  • @MistRazor
    @MistRazor Месяц назад +2

    Just linked this tutorial in my latest redstone video. Great job!

  • @kaitlynalexander1408
    @kaitlynalexander1408 7 месяцев назад

    Thank you so much man i spent ages with normal sorters just clogging up then dumping out the filter items and breaking but this one hasnt done that you saved me from crashing the server again lol

  • @MichaelOwenNZ
    @MichaelOwenNZ Год назад

    Great video, thanks. This works beautifully in Java 1.19.3.
    In case anyone else has this issue, I did have a small issue with alignment of my item flow. Items were running on a slight diagonal and not being picked up by the first module. You need to make sure your items are coming in from the dropper line fast enough to actually hit the chest to be aligned properly.

  • @LNZT
    @LNZT 4 месяца назад +2

    Amazing tutorial, one thing I would’ve liked though is a tutorial on the water transport, I know it’s not hard but yk, a little thing for those who don’t know😅

  • @SuperPiet7
    @SuperPiet7 Месяц назад +2

    This video is so good. Thank you very much

  • @scientific_guy
    @scientific_guy 17 дней назад +1

    This is AMAZING! Awesome job!!!

  • @ArchaeanDragon
    @ArchaeanDragon Месяц назад +1

    I made a 1-wide tileable version the 2-wide design, but the bottom minecart straddles two hoppers instead of 4, so it at least gets double speed vs single-speed.
    If you build a high-volume farm that uses entity coalescing, just be aware that you can easily overflow even the hopper minecarts., because while it will instantly pick up (most) of a stack, if you have several full stacks going by, you'll need multiple filters of the same item type to be sure they are picked up.

  • @andreibida
    @andreibida 2 года назад +4

    the 2 wide design is very good, but at least in 1.19 the one wide tileable can break when the items move in a loop and multiple stacks of the same sorted item gather; the two hoppers will eventually pull the filler items from the one above

    • @norbucso
      @norbucso 2 года назад

      Just noticed this. Have to rework the whole thing.

    • @chexmax3647
      @chexmax3647 6 месяцев назад

      Did you find a fix for this

    • @andreibida
      @andreibida 6 месяцев назад

      @@chexmax3647 i stopped playing quite a while ago, so i don't really remember. but if memory serves right I don't think I did

  • @oblivionx14x94
    @oblivionx14x94 9 месяцев назад +1

    14:30 Im on the 1.20.72 update on bedrock xbox. However i put the slab activator rail first then the hopper rail as u did by block by block and the rail next to the hopper minecart rail keeps switching side ways on the bottom and its not working right. Does it have to do with the update?

  • @FriedBob
    @FriedBob 2 года назад +4

    For everyone wondering - This WILL work on Bedrock 1.18.10. For the item filtering part, I took a stack of dirt and renamed it. I started off with 11 in each of the 4 slots, but wound up with , 8, 11, 11, 11 at the end. For the item being filtered, it kept 1 crimson plank, and 3 redstone dust - so it seems to vary a little based on the item being filtered.
    A few notes:
    1. The lower minecart with hopper stayed flat for me, but this did not seem to make difference.
    2. I was not able to get a second minecart with hopper placed on the lower block - not sure if this is just my missing the hit block or a limitation of bedrock.

    • @PiyushKumar-oi5sw
      @PiyushKumar-oi5sw 2 года назад

      Does It Work In Latest Version 1.18.30

    • @thegeek7430
      @thegeek7430 2 года назад

      Was looking in the comments for a while trying to find out if it works on bedrock bc I didn't wanna test it myself, thank youuu

    • @FriedBob
      @FriedBob 2 года назад

      @@PiyushKumar-oi5sw I have not confirmed that yet, but I don't see why it wouldn't

  • @GameVirus9833
    @GameVirus9833 2 года назад +2

    Just used this design of item filter on my gold farm on bedrock edition, getting upwards of 70,000 nuggets an hour and this item sorter works perfectly, thank you

    • @TheLemonOrchard
      @TheLemonOrchard 2 года назад

      How'd you do it in the nether without water?

    • @GameVirus9833
      @GameVirus9833 2 года назад

      @@TheLemonOrchard In bedrock you can have portal ticking farms that create lots of piglins. I made a portal ticking farm in the overworld.

    • @TheLemonOrchard
      @TheLemonOrchard 2 года назад

      @@GameVirus9833 welp, I still need to figure out how to do this in the nether so I'll just keep searching for a solution

    • @Jeeesh69
      @Jeeesh69 Год назад

      @@TheLemonOrchard have items transport in to overworld then into this system, less work

  • @AnjoSoy
    @AnjoSoy 2 года назад +1

    Hi,
    Thanks for the video. I started a item sorter one our server and maked that old one, with only hopper and we were missing a lot of items/speed. I've followed every step on a 'lab' world and then maked on the survival. It worked perfect!
    Again, thanks! =D

  • @gemini3178
    @gemini3178 6 месяцев назад +2

    awesome design that I'm using on my skyblock world, substitute the walls with end rods that doesn't combined like walls... plus light 😊

  • @6torthor
    @6torthor 2 года назад +1

    never have subbed faster in my life, this is genius

  • @johnpfeilsticker5870
    @johnpfeilsticker5870 3 месяца назад +1

    @BlackBeltPanda
    I'm not sure if anyone else has had this issue, but have you ever heard of a problem where the lower minecart pulls from the upper that is not directly above? I'm having this issue where the lower carts are pulling from the upper cart to their south. It's not in every slice, which is weird, but in four out of the twenty one that I tiled it's happening and I cannot seem to fix it.

  • @ronanosborne2206
    @ronanosborne2206 3 года назад +8

    This sorter doesn't work with 16 stackable items such as buckets and ender pearls. Any way to make it work? Using it for my gold farm and gold trading farm combined. 1.18.1

    • @v0id_d3m0n
      @v0id_d3m0n 2 года назад

      Maybe if u add the extra buffer minecart it would work?

    • @FloofWolfe
      @FloofWolfe 4 месяца назад +2

      ilmango has a minecart sorter that he fixed to handle 16x stackables. It's not very tileable but you could stick 1 onto the end of a water steam easily enough

    • @jaewanplayzofficial
      @jaewanplayzofficial 19 дней назад

      Hey this uses signal strength 3 filters. Use 11 items instead of 45 items.

    • @jaewanplayzofficial
      @jaewanplayzofficial 19 дней назад

      (At least according to an old forum post)

  • @angelorhd7950
    @angelorhd7950 2 года назад +1

    Bro this video is exactly what i need, thanks for this great video

  • @It-b-Blair
    @It-b-Blair 9 месяцев назад

    Omg! That’s epic! I wish I found this before I spent 2 days building and troubleshooting my current double farm…. Maybe I’ll do this upgrade next week when I’m less burnt out with it.
    A note about the wall width, if the asymmetry bothers you, you can place torches all along the wall so each section has that pylon bulge. This will also slightly decrease lag because the engine won’t be working on shifting light levels as items are processed in each section 😸🤘

  • @MR0MACIEK0MR
    @MR0MACIEK0MR 9 месяцев назад

    with single ones, it is better to keep a distance, because the signal of one mc-hopper (signal over 3) interferes with neighboring mc-hoppers. Very good material :)

  • @DocXorli
    @DocXorli 6 месяцев назад +1

    I am seeing this in 2024 when I thought all hope was lost, but trying to stack 2 layers of different item chest with this one was a pain without having to use a million hoppers, but i figured it out, thanks

  • @xziden8787
    @xziden8787 5 месяцев назад +40

    For once someone who actually EXPLAINS redstone, instead of just building and saying " the redstone is super easy ".

    • @kmJYOTI-lm5tt
      @kmJYOTI-lm5tt 3 месяца назад +1

      There are ton of tutorials on every single redstone contraption possible most builds are pieced together from them
      You not knowing what redstone do is your fault don't mindlessly build anything

  • @Acadewolf
    @Acadewolf Год назад +2

    Works in Bedrock 1.20. I did the single wide one, but no matter how I oriented or placed the rails I couldn't get the lowest one to stop snapping to the next one on the hopper (yes I tried the tips at the end of the video). I just left a gap between them and it works marvellously for my guardian farm

  • @titounours3785
    @titounours3785 5 месяцев назад +1

    I built it in 1.21 but the first minecart litteraly eat all the items and filters . The activator rail doesn't block the middle minecart. any idea to fix this ?

    • @titounours3785
      @titounours3785 5 месяцев назад

      nevermind I puted a powered rail instead of an activator rail

  • @kaydendeblieck6068
    @kaydendeblieck6068 Год назад +4

    You are able to double the output speed of the 1 wide tileable the same way you do with the other but on 2 hoppers instead of 4

  • @felku7380
    @felku7380 5 месяцев назад +1

    i have golem farm on server with 70 spawners. this minecarts lose all items, including renamed grass. what can i do, i build this 1:1

  • @TheeSlickShady_Dave_K
    @TheeSlickShady_Dave_K 2 года назад +1

    I absolutely loved the tips and tricks at the end
    And how to build it

  • @ArnoldSolanki
    @ArnoldSolanki 10 месяцев назад +1

    Can someone explain to me why we need that middle rail that need to be perpendicular to the inclined rails? The rail just snapped to the inclined ones no matter what I do so I'm hoping to find some alternative.

    • @Киноварь
      @Киноварь 9 месяцев назад +1

      It has to do with Minecraft picking which rail connects to which based on cardinal directions.
      Basically if you rotate the setup 90 degrees it'll work.

  • @zdmnl4628
    @zdmnl4628 Год назад

    thanks bro you saved me i just built a wood farm but the items were too fast for the regular hopper system, i built the 2-wide its great

  • @canadianavenger
    @canadianavenger 2 года назад +11

    Nice tutorial, with great explanation. You can double the hopper speed on the one-wide version exactly as you do on the 2 wide version (just tested in 1.19)
    Placement can be a bit tricky, but it works. Place blocks on either side of the hoppers so when you push the cart it doesn't shift sideways, and use an iron fence over the hopper without the rail, and push the cart into it. remove the iron fence and temporary blocks after. Using the gravity blocks on the one side that already has a cart placed works perfectly. The rest goes exactly as your tutorial shows.

  • @OpenBagTwo
    @OpenBagTwo 2 дня назад +1

    Oh my God, I *finally found you!* I watched this video roughly three years ago, and it formed the basis of my "Loch Ness Chest Monster."
    Been trying on and off for months to find this video again, just so I could give a holler and a thanks, so: hey, thanks!
    Been three years / 9000 Minecraft days, and I've never had a slice overflow once.

  • @Sovietfoxx
    @Sovietfoxx 6 месяцев назад +1

    This is really useful, thank you! Take my subscription

  • @alexislarrode1652
    @alexislarrode1652 3 года назад +2

    Very good video, the explanations are perfect. Thank you a lot !

  • @kevint3522
    @kevint3522 Год назад

    Exactly what I was looking for. I'll build it and test it. Thanks.

  • @carlfranzabarquez4359
    @carlfranzabarquez4359 Год назад +2

    I'm really confused why I've never seen (so far) someone who has a configuration of 1-11-11-11-11 (1 is the item to be sorted and the 11's are the renamed items/blocks) in their hopper filter. They would still add up to 45 and the 46th item would trigger the redstone and go to the chest. You just used the least possible item-to-be-sorted in making up the 45 so 63 more can go in without getting past the hopper filter. Ofc, this would not make the system faster but it would avoid clogging and the need to input the excess items in the system over and over again. Please correct me if I'm wrong.

  • @imlaggy8737
    @imlaggy8737 День назад +1

    If anyone is having issues with the sand flickering and not dropping here is the fix!!!!!!!!! ( place the sand in the 2x2 space and let them just stay there and flicker and leave realm (not sure about single player world) and load up another world and then head back and it should have fallen) your welcome. was also done while alone in a realm

  • @christofferskoglund
    @christofferskoglund 5 месяцев назад +2

    Built this to my Witch farm in 1.21 (Java), works perfectly. Had to put the waterstream one block away from the dispenser, otherways you get water bottles instead of empty bottles. Edit: Or use Dropper instead, I leave this comment here if anyone else makes the same mistake :)

  • @Paulie198
    @Paulie198 3 года назад

    Did not realise that the hopper carts could replace hoppers. Nice!!

  • @star.crushed
    @star.crushed 9 месяцев назад +1

    I'm on bedrock and had to use the 2 wide for my guardian farm because the buffer trick doesn't work so my bottom minecart hopper clogs, but it works perfectly! thanks for this!

  • @tylerbeattie8261
    @tylerbeattie8261 Год назад +1

    The minecart in the gravity bloc on the 2 wide won't pull items from the hopper minecart about it even tho the Redstone torch is turning off and unlocking the hopper minecart. Do you have any idea what to do about that

  • @LordOless_aka_Kibeltronics
    @LordOless_aka_Kibeltronics 2 года назад +1

    GG`s That is what i have looking for some time. Awesome upgraded ImpulseSV`s sorting system. And also thank u for simple and clear explanation rest stuff about this system. Old guy like me sometimes can`t get game mechanics clearly and other youtubers sounds like language for those people, who knows everything already lol.

  • @HaecEsneLegas
    @HaecEsneLegas 2 года назад

    This wasn't what I was looking for... but great video and I will certainly be using these designs in the future.

  • @ambertaylor6558
    @ambertaylor6558 3 года назад

    Amazing! Exactly what I needed! Thank you!

  • @TheeSlickShady_Dave_K
    @TheeSlickShady_Dave_K Месяц назад +1

    Great video!

  • @stuartsimmonds9495
    @stuartsimmonds9495 6 месяцев назад +1

    If I put 2 different types of blocks in the dropper the first hopper mine cart filter breaks and sucks everything into it. Bedrock. Not sure what’s happening

    • @stuartsimmonds9495
      @stuartsimmonds9495 6 месяцев назад

      Everything get sucks into the first mine cart hopper regardless of the filter. Everything just empties

    • @stuartsimmonds9495
      @stuartsimmonds9495 6 месяцев назад

      I’m using the 1x1

    • @stuartsimmonds9495
      @stuartsimmonds9495 6 месяцев назад

      I’m also on a realm

  • @TeenageGamer-ge2ep
    @TeenageGamer-ge2ep 5 месяцев назад +3

    Bro my items are not stay in hopper minecart it just flow down all items in cheast

  • @drakesharpe5667
    @drakesharpe5667 Год назад +1

    How exactly would you go about stacking more chests underneath the 2 wide version, while maintaining the speed?

  • @itslance1656
    @itslance1656 3 года назад +1

    The king is back baby!!!!!!!🔥🔥🔥❤️❤️❤️

  • @toasterfamsquad3633
    @toasterfamsquad3633 6 месяцев назад +2

    The two wide one works in bedrock but you have to get the minecart into the sand differently. Place fences on the side you don't need to place rails on later, put the minecart on the other side, push it into the middle, and then use pistons to push the sand over the minecart.

    • @stuartsimmonds9495
      @stuartsimmonds9495 6 месяцев назад

      I’m using the 1x1 version

    • @the_mikeyp
      @the_mikeyp 5 месяцев назад

      Thanks bro

    • @charalampossoteriou103
      @charalampossoteriou103 4 месяца назад

      Bro it wont let me push the sand in without moving the cart from the center of the hoppers

    • @stuartsimmonds9495
      @stuartsimmonds9495 4 месяца назад

      @@charalampossoteriou103 tried that design and it was too much of a headache for me to do it so I opted for the 1x1

    • @toasterfamsquad3633
      @toasterfamsquad3633 4 месяца назад

      @@charalampossoteriou103 try using three fences and pushing the minecart into the corner of those and then pushing a block over the last one with a piston

  • @land23
    @land23 3 месяца назад +2

    after an amount of time the middle minecart will glitch through the slab and teleport up to the opposite facing rail and it breaks the whole thing

    • @jacosbinerd4891
      @jacosbinerd4891 2 месяца назад

      Are you using the experimental features minecart change thingamajig? if so, that could be your issue. If not... then I have no clue what would cause and/or fix that.

  • @Flandre-Scarlet
    @Flandre-Scarlet 9 месяцев назад

    10:29 When items reach that certain level that causes the top hopper to not release any more items and the bottom hopper will lock, wouldn't that mean that a certain number of the desired item never make it through to the end?

  • @klackygears
    @klackygears 2 года назад

    This was a huge help! Thanks!

  • @chasebentle3246
    @chasebentle3246 2 года назад +1

    I have built this in bedrock, but the only problem with it now is that when items go through the hopper minecart, it sends a redstone signal that connects to all the other atosrters, which then emptys the hopper minecart, breaking the system. This makes i so that the autosorter is not tileable, does anyone know a fix to this besides breaking everything and seperating the item sorters

    • @TheBlackBeltPanda
      @TheBlackBeltPanda  2 года назад

      Double-check you've used the right components (activator rails vs detector rails, repeaters vs comparators, etc.)

    • @chasebentle3246
      @chasebentle3246 2 года назад +2

      @@TheBlackBeltPanda Thanks, i fixed it.

    • @xbaguetteboy
      @xbaguetteboy 2 года назад

      @@chasebentle3246 How did you fix it? I'm having the same problem

    • @chasebentle3246
      @chasebentle3246 2 года назад

      @@xbaguetteboy I change the way I placed the rails, and i then found out that the redstone would send signals which would mess up the other sorters so i just spaced each autosorter out and instead made 2 rows of doublechests for each item.

  • @nikruss7483
    @nikruss7483 2 месяца назад +1

    This system is amazing however whenever building the the single tile sorter and placing the double minecarts while facing south, will cause them to teleport up to the perpendicular activator rail in a matter of five minutes! Has anybody found a fix to this?

  • @colegoldstein6432
    @colegoldstein6432 3 года назад +3

    I have an issue with the "filler" blocks being sucked into the system. I am using stone blocks that are named in an anvil to "filler". Any solutions?

    • @Ben-bj1ny
      @Ben-bj1ny 3 года назад +1

      This is due to the item sorter being used. As the minecart hoppper picks up more and more blocks, this will be reflected in the signal strength of the comparator. As such, having too many items will cause the comparator to output a redstone signal strength higher than 2, causing the surrounding item sorter slices to turn on too. This is why your filler blocks are being sucked into the sorting system itself. Preventing this is called overflow protection and can be done by alternating the design of the item sorter. By constructing two different sorters next to each other, it prevents any overlap of redstone signals and thus will prevent any redstone signal from intefering with each other if there are too many items in the minecart hopper. A simple hybrid sorter can be found on the minecraft wiki tutorials page under hybrid design.

    • @elliotd9121
      @elliotd9121 2 года назад

      @@Ben-bj1ny so is this design still usable with some slight modifications? Even if the sorter is only 1 time wide, sorter blocks will get sucked through with any number between 41 and 59 blocks are inside the Minecraft at a given time?

    • @topaz3470
      @topaz3470 2 года назад +2

      Might be a little late, but check the type of rail you used. I myself, made the mistake of using Powered Rails instead of Activator Rails, and the thing that you described happened to me.

  • @DudeFromSchool
    @DudeFromSchool Год назад +1

    on 1.19.4 server and sometimes the filtered item (ex: spruce logs) gets replaced by random items going through the system, i double and triple checked and not a single piece was missed. any fix to this? EDIT: im sourcing the items straight to the system in the water stream instead of a dropper clock(ive tried both and 1 or more of the filters always seem to break)

  • @ch4rl3e85
    @ch4rl3e85 3 года назад +2

    when placing the 1 wide sorters next to eachother the mine cart rails keep on connecting on the hoppers instead of being at an incline does anyone know why this may be? im on survival if that makes a difference

    • @dirtnap_downunder
      @dirtnap_downunder 3 года назад

      Same here :( what version are you playing on?

    • @Shaners1701
      @Shaners1701 Год назад

      I've got the same problem now on 1.20. When placing Activator Rails on hoppers running east to west, they switch to connect to the hopper line sideways instead of staying at an incline to the next level up. Anyone find a solution?

  • @ajc1476
    @ajc1476 2 года назад +1

    Help! The lower hopper minecart doesn´t connect to the one inside the gravity blocks, no matter how I place it, if the lower HM is in the block laying flat it DOES connect, how can I fix it? Im on the latest Bedrock edition if that helps

    • @BlooFuzz94
      @BlooFuzz94 2 года назад

      Having the same problem, myself right now… Double checked placement of the “covered” mine cart hoper, too.

    • @BlooFuzz94
      @BlooFuzz94 2 года назад

      Ah.
      Well. Triple checking them, and I guess the placement is alright now. Ha…
      Just keep nudging them around until it works…! You can still cover them after you know they deposit into hoppers, and thus into whatever chests at the bottom.

    • @ajc1476
      @ajc1476 2 года назад +1

      @@BlooFuzz94 yes, i wventually got it to work like that too, thanks

  • @just_joey
    @just_joey 7 месяцев назад +1

    can you make a tutorial for one with multiple chests in an area? where you can store in many different chests

  • @bbacher95
    @bbacher95 6 месяцев назад +1

    This is great. Thanks!

  • @ljjebi
    @ljjebi 2 года назад +1

    I found this accidentally and found out you were actually blackbeltpanda. Wasn't expecting to find you again 10 years later.
    I actually found a comment of mine from 10 years ago lol

  • @ZaraStocher
    @ZaraStocher 2 года назад +5

    This is an awesome design! The only issue I have with this is that the stacked minecarts create a noise that becomes pretty loud with a lot of those sorters next to each other... oh and I just noticed, that the minecarts pop up onto the middle rail after a few minutes all at once.
    I tested it a bit and it looks like putting them directly next to each other is the issue here... cuz with one block between them, the sound doesn't exist and the carts don't pop out either. I'm on 1.18 (Java) if that makes a difference

    • @yeldardeerttoille
      @yeldardeerttoille 2 года назад +1

      I have the same issue, but for some reason only on one of the 2 ive made

    • @roberducky7481
      @roberducky7481 2 года назад

      you may or may not have found a solution but this is the one i used. When placing the minecarts side by side on the first layer, build an inclined rail with a one block drop onto the rail that its meant to be on. For some reason with minecraft physics, this causes them not to make noise when side by side. While YOU cant hear it, the game still does, and because of this, the game still counts it as a sound. So if you build enough of these sorters, your sound will start glitching out due to the sound limit being at its cap. A fix for this is to install a mod that increases the sound cap. If you are too lazy to do the inclined rail thing then you can install a mod that makes them quieter and i think theres an option with mod menu to disable their sound all together.

    • @nickricca3505
      @nickricca3505 Год назад +1

      @@yeldardeerttoille same here, I built a hallway, the right side is fine but the left side pops off

    • @Ajads2
      @Ajads2 Год назад

      I have the same problem, but i found a solution, switch Off and On the general audio and the noise is gone

  • @SuperBaccaPlayz
    @SuperBaccaPlayz 5 месяцев назад +1

    Damnn I was all ready to fix the item sorting of my groups xp farms on my server but the server doesn't let us push minecarts.

  • @iLLSniper
    @iLLSniper 2 года назад +7

    Biggest issue on bedrock is rails not snapping to where you want them, fix: make the line of activator rails first, then place the other activator rail on hopper and detector rail above, this will put the rails where they need to go

  • @NubZ508
    @NubZ508 16 дней назад

    What can i do to fix the item filter from breaking i am using the 2 wide sorter for my gold farm and the problem looks to be its draining everything including the blocks that arent supposed to i have only 1 hopper minecarte in each one so i dont get whats the problem

  • @Dragonlady80
    @Dragonlady80 3 года назад +1

    I love to have these in my world, I'm just not use to using redstone. After all these years I'm still more of a builder then the redstone side of the game.

    • @TheBlackBeltPanda
      @TheBlackBeltPanda  3 года назад +1

      They are handy, indeed. =)
      And nothing wrong with preferring building! Do what you enjoy =)

  • @felipemiguel9907
    @felipemiguel9907 2 года назад +4

    On bedrock i don't know if this works. But I tried making a distribution system to evenly split the loot into 4 parts, each to an small, independent storage with items sorting. It's really expensive, but works fine

  • @ilonachan
    @ilonachan 2 года назад

    Brilliant design, gonna keep it in mind for future item sorting times. It's not gonna help me for my specific use case, because I need the EXACT number of a filtered item, but for regular storage applications there's no real issue with this design.

  • @dobymobile8188
    @dobymobile8188 5 месяцев назад +1

    for some reason the faster redstone clock doesn’t work for me?

  • @Cxmp-S
    @Cxmp-S 2 года назад +3

    Im curious how lag differs from say the classic sorting method to this one. This big helps the raid and gold farm situation but what about for an actual chest room. Anyone use this large scale and could provide insight?

    • @lemonke5341
      @lemonke5341 2 года назад

      prob will crash your game

    • @roberducky7481
      @roberducky7481 2 года назад

      I used it for my bulk storage area (storage area for blocks and items i have WAY too many of). I had alot of problems with the carts making sound, which i fixed, the sound cap being at max causing choppy sound, which I fixed and redesigning my ocean monument to fit it. But all in all, its works pretty well and i also added a column of chests at the end of the circuit to pick up any unsorted/ unsortable items

  • @davidtaylor6124
    @davidtaylor6124 2 года назад

    Excellent tutorial!

  • @chexmax3647
    @chexmax3647 6 месяцев назад

    Can you change the chest with a different block to align the items in the water line?

    • @TheBlackBeltPanda
      @TheBlackBeltPanda  6 месяцев назад

      There are several ways to align items; you can find a lot of tutorials on water transport systems here on YT. =)