Ebay has 3D printed pods made to fill mags of EVERY type & count. They work really really well & you can wait alot longer to load your mags if you know its instant. I was able to fill 6 zeta mags with in 2 mins were as it took 7 to do them manually only once a electric mag loader is full dose it save time... because the cap comes off you can fill the 3D printed ones as fast as a pod.
I'm getting a T-15 today alongside a Tippmann TiPX today so this will REALLY help me out! I'm not new to paintball but these tips will be great! Thanks TooTall! :) Edit: I just got my T15 in the mail yesterday (WOW that was fast!) and it is AMAZING! I can't wait to use it! :D Edit 2: I fing love this marker!! It has treated me so well, and I adore using it! :D
New owner here so thanks because I was gonna leave all my mags loaded in storage with regular .68 rounds.. now I'm having an issue I don't understand this is not just my first t15 but also my first paintball marker... instructions don't seem as good for beginners... how do I uncock it how do I know my tank is actually working? When I shoot it stays in the barrel and doesn't actually shoot. If I tip the marker down ball falls right off.. any ideas what I might be doing wrong??
The bt4 has the same detent problem only you can't solve it by removing the barrel. You can however just flip the detent before everytime you play, and it should be fine.
Hopping u see this but we got basically 3 new t15s and we keep getting flips on the 1st strikes on all 3 guns. 1 the barrel keeps sliding forward and I have no idea on how to fix that. And 1 other 1 keeps leaking air out the back randomly. Help please
What about adjusting velocity? I have followed all the tips you gave; however, I keep chopping paintballs, regularly... I have missed several games cuz of this issue. Please, advise!
The valve pin scares me when the bolt is forward.. I've replaced that thing 3 times. Idk why my t15 leaks from there... and I've rebuild the whole thing.
I had similar problems when i got a t15pdw fullauto. Played with it 4 times in 6 months and every game it would leak i would rebuild it would be fine for about 100 balls then leak again. So i sold it.
I really don't understand why these markers don't just use the same type of springs you find in a real firearm (maybe someone has an actual answer I'm unaware of). In almost every fire arm component that has a spring, including the mag, the issue isn't keeping the spring under tension, but the constant use of the spring that causes it to lose its strength. People have all types of myths about springs, but back in the early 2000's, we found 120 twenty round M16 mags that had been kept loaded since 1965. I believe this was 2003, so we ended up with mags that had been kept fully loaded for 38 years and they worked flawlessly. The only failures we had were some of the primers on the 5.56 rounds, but other than that, no misfeeds or failures from the mags themselves.
I was trying to find some stuff like the sight and flashlight you had in your video from last year showing what you had on your marker. Any chance you have any comparable solar sights?
So I was just finishing watching one of your videos and wanted to start playing with my markers and when I put my mag in the marker I heard the little spring cycle sound and cried a lil lmao
The drive spring loses strength from continuous compression and decompression. Leaving the gun cocked will be fine. This will help save detents if you do leave the barrel in the gun. Not a big deal on this gun, but definitely on others.
Whats the symptoms of a bad drive spring. I was always too lazy to take my barrel out and always left the gun cocked to save the detents. Last time I played I was having odd burping issues regardless of my recock adjustment.
Tank doesn’t have enough pressure going through the regulator but also don’t cock your gun to store it just take the barrel out it will make your gun last a lot longer
Any idea why I’m getting double feeds and chops? I seen someone add 1/8” to the bolt sleeve that engages the mag to feed the spring to fix this; has anyone else done that? What sucks: The charge before filling sucks because you loose air! The barrel twist to mag or hopper sucks because it has play in the barrel. My barrel detents were flat out of the box. The barrel indexing groove was oversized and created wobble. The ball bearing indexing screw with pin was bent. The ball detents sat sideways due to barrel machining. For the price it should have a FULL AUTO kit like the Milsig m17. The CQB PDW sucks because the set screw hole is oversized and it falls straight out. The mags feel cheap, the should’ve used the same plastic as the TMC. Sometimes I have second thoughts 💭 Then other times I feel like fixing the issues by redesigning them.
@@tooootall it’s a new barrel they sent me because the OEM was machined too deep causing play in the barrel. Try bending them more, thanks for the advice
3:20 this is incorrect. Its the repeated use of the spring in this instance. This debate has been going on forever. Loading and unloading of magazines wear them out.
Yep, all of these except the detent issue can apply to most basic mechanical guns (even the detent issue technically applies to any basic blowback, wearing out your detents is just generally not easily avoidable unless you're storing the gun with the bolt or the detents removed.)
I’m not sure if Alex made this video because of me. I phoned in last week cause I connected my T-15 DMR to my ninja Tank and was afraid it was going to blow up my house. But Alex came to the rescue and fixed it over the phone
Reverse what you know in Speedball/Recball and apply to MagFed. Harder shell works best in magazines, i.e. Valken Graffiti, because it does not deform under the magazines spring tension and high humidity. If your style is MagFed though, you should know this. Plus, FSR should be the go to for MagFed anyway.
@@mikesheber2205 so you prefer to play with a goofy looking gun that makes it way easier? why don't you travel to mars and fight off aliens by your logic? I don't have issues with speed ballers but I have probs with lame ass people who reject us magfed players. It doesn't have shit to do with playing soldier. I like real guns, and it's the closet I can get to using them in a friendly and competitive environment. Pretty simple.
Routine maintenance! If your maker stays on the ready which is obvious for home defense, you should change O-rings, springs etc. etc. every other month or so... because odds are you will probably never have to use it...Stay safe my friend
You talk about the spring but frankly how is that correct. I leave my real firearm mags loaded. A spring is made to be compressed and so on. Where is the evidence of the spring issue.
Real steel mags have different springs, the springs on paintball mags are significantly weaker, I've left one of my mags wound up and had to rebuild it.
Springs don't lose tension from being compressed. They lose tension from the number of cycles it has been compressed. If your springs are malfunctioning from being compressed for a long period of time, its from some other cause.
not sure where you're getting your info but a spring that is compressed over a long period of time absolutely becomes weaker. feel free to google it, plenty of info on the subject.
@@tooootall www.europeansprings.com/springs/technical-information-springs/spring-durability/ provides a good reading on the subject. Can a spring lose tension from being compressed for a long period of times, potentially. As long as a lot of other parameters are met such as high heat, compression beyond its elastic limit, and extreme lengths of time (years). Then once it loses a trivial amount of tension. Will the difference be enough to make a difference, almost always no. I own several Tiberius mags and have taken a break for a few years, they all work just fine. This also holds true for firearm magazines too. Now your part about detents, which are technically springs, is completely true. It has happened to be a few times from neglect on my part.
Depends on your needs, a MG100 is a mechanical magfed speedball marker, while the T15 is moreso a AR-15 replica that shoots paintballs. Will tell you a full auto T15 is smile inducing.
Mg 100 is alittle more reliable but not a lot of upgrades but the t15 you have soo many upgrades like a full auto kit and it looks better but it’s mainly up to personal preference also you kinda will get frustrated with your t15 and eventually you’ll know what to do with it
@@matthewcorrea4278 i disagree. if you take care of it there should be no reason to be frustrated with a T15. mine is 5 years old and has seen hundreds of hours of use and still works like a dream.
@@tooootall oh I take care of my t15 no I was saying when parts break it takes forever to receive them they’re always out of stock for parts and the mags are the best mags but I can never get them to feed right. Also when I bought my full auto kit it broke my upper manifold and took me forever to get that part and that’s where the frustration came from just from parts never being in stock
@@matthewcorrea4278 ah i get ya. if you order parts from Defcon we almost always have them in stock. as for the mags not feeding right, have you checked the steel top plate for wiggling? thats usually the issue and i have a vid on how to fix that.
Lol....don't keep it cocked, loaded, or with the barrel in. Well shoot. That kinda makes it a useless home defense weapon if you have to hand feed your mags, screw the barrel in and then cock it.....all before the bad guy gets you.
Carlos, I never understand why I should take the bolt out and store it separately. Everybody said:"Oh, that is good, you have to." Never heard that argument for other magfed markers. Do you?
@@tonyross4365 hey Tony. Look up bill C-21. I recommend looking it up with “air soft” to get the specification I was talking about. Government announced it about a week ago.
Please do more for the t15
Good thing you made this video, because given these comments, people really don’t understand,
Ebay has 3D printed pods made to fill mags of EVERY type & count. They work really really well & you can wait alot longer to load your mags if you know its instant. I was able to fill 6 zeta mags with in 2 mins were as it took 7 to do them manually only once a electric mag loader is full dose it save time... because the cap comes off you can fill the 3D printed ones as fast as a pod.
Make one send it to me price?
Love the t-shirt. Where can I get one?
He wont answer iam waiting since two years for my stuff
lol
Just bought a T15 and didn't know any of this, so thank you!
I'm getting a T-15 today alongside a Tippmann TiPX today so this will REALLY help me out! I'm not new to paintball but these tips will be great! Thanks TooTall! :)
Edit: I just got my T15 in the mail yesterday (WOW that was fast!) and it is AMAZING! I can't wait to use it! :D
Edit 2: I fing love this marker!! It has treated me so well, and I adore using it! :D
New owner here so thanks because I was gonna leave all my mags loaded in storage with regular .68 rounds.. now I'm having an issue I don't understand this is not just my first t15 but also my first paintball marker... instructions don't seem as good for beginners... how do I uncock it how do I know my tank is actually working? When I shoot it stays in the barrel and doesn't actually shoot. If I tip the marker down ball falls right off.. any ideas what I might be doing wrong??
The bt4 has the same detent problem only you can't solve it by removing the barrel. You can however just flip the detent before everytime you play, and it should be fine.
Wish I could get parts for the Airsoft version in 🏴 Scotland. First strike ignore customers emails
Thanks for the information! Keep up the great work dude! 🤟
Yea it was good info
I've spent my whole life trying not to dimple my balls. Good tips.
Hopping u see this but we got basically 3 new t15s and we keep getting flips on the 1st strikes on all 3 guns. 1 the barrel keeps sliding forward and I have no idea on how to fix that. And 1 other 1 keeps leaking air out the back randomly. Help please
Can you do one for the tmc?
You have helped my buddy and I very much with our new T15's thank you good sir.
I have adored my T-15 ever since I got it. :)
What about adjusting velocity?
I have followed all the tips you gave; however, I keep chopping paintballs, regularly... I have missed several games cuz of this issue.
Please, advise!
Your air tank might be too low of a pressure the marker needs to be at least 860 for newer gen t15
The valve pin scares me when the bolt is forward.. I've replaced that thing 3 times. Idk why my t15 leaks from there... and I've rebuild the whole thing.
I had similar problems when i got a t15pdw fullauto. Played with it 4 times in 6 months and every game it would leak i would rebuild it would be fine for about 100 balls then leak again. So i sold it.
well, those advices work for all markers
If you take the spring out of the rear you can leave the barrel in.
I really don't understand why these markers don't just use the same type of springs you find in a real firearm (maybe someone has an actual answer I'm unaware of).
In almost every fire arm component that has a spring, including the mag, the issue isn't keeping the spring under tension, but the constant use of the spring that causes it to lose its strength.
People have all types of myths about springs, but back in the early 2000's, we found 120 twenty round M16 mags that had been kept loaded since 1965.
I believe this was 2003, so we ended up with mags that had been kept fully loaded for 38 years and they worked flawlessly. The only failures we had were some of the primers on the 5.56 rounds, but other than that, no misfeeds or failures from the mags themselves.
Does removing the barrel and putting them everytime not destroy the thread on them?
I was trying to find some stuff like the sight and flashlight you had in your video from last year showing what you had on your marker. Any chance you have any comparable solar sights?
So I was just finishing watching one of your videos and wanted to start playing with my markers and when I put my mag in the marker I heard the little spring cycle sound and cried a lil lmao
As a general rule of thumb, it it good practice to store mag-fed markers with the barrel off, or is this specific to the T15?
TMC doesn't mind being stored with barrel on, it depends on the ball detent
The drive spring loses strength from continuous compression and decompression. Leaving the gun cocked will be fine. This will help save detents if you do leave the barrel in the gun. Not a big deal on this gun, but definitely on others.
Trust me, that is not true at all. I have had tons of people bring in T15s that dont work anymore cuz they left it cocked over the winter.
Whats the symptoms of a bad drive spring. I was always too lazy to take my barrel out and always left the gun cocked to save the detents. Last time I played I was having odd burping issues regardless of my recock adjustment.
Tank doesn’t have enough pressure going through the regulator but also don’t cock your gun to store it just take the barrel out it will make your gun last a lot longer
How would I fix the detent issue with a Tippmann Stormer, since the detent is around the bolt when it’s decocked?
Are you able to remove the detent from the marker partially like with the t15 or M17?
If you have a "trident" shaped detent just flip it each time before you play, and it should be fine.
my only thought about t15 is: sad that they discontinued t4.1
I just take the bolt right out when I store it, put some gun oil on the bolt and put it in a zip lock bag
I do the same, and I also keep the manifold in the ziplock, so the orings are not squashed
@@andresbeltran1314 great idea! I never thought of that!!
Any idea why I’m getting double feeds and chops? I seen someone add 1/8” to the bolt sleeve that engages the mag to feed the spring to fix this; has anyone else done that?
What sucks:
The charge before filling sucks because you loose air!
The barrel twist to mag or hopper sucks because it has play in the barrel.
My barrel detents were flat out of the box.
The barrel indexing groove was oversized and created wobble.
The ball bearing indexing screw with pin was bent.
The ball detents sat sideways due to barrel machining.
For the price it should have a FULL AUTO kit like the Milsig m17.
The CQB PDW sucks because the set screw hole is oversized and it falls straight out.
The mags feel cheap, the should’ve used the same plastic as the TMC.
Sometimes I have second thoughts 💭
Then other times I feel like fixing the issues by redesigning them.
Double feeds is because your detents need to be bent back into shape.
@@tooootall it’s a new barrel they sent me because the OEM was machined too deep causing play in the barrel. Try bending them more, thanks for the advice
Does it suck on the power tube ?
Need help have not made thru a Mag get on my T15
do these rules apply to the M17 A2 also???
One question, where do I find a T15? been looking at many sites, they seem pretty scarce.
I just now bought mine on Amazon no problem
3:20 this is incorrect. Its the repeated use of the spring in this instance. This debate has been going on forever. Loading and unloading of magazines wear them out.
It doesn't matter if you let the barrel attached, as long as you take the bolt out. / 3:47
Most of what he said does not only apply to the T15, but almost every other magfed marker
Yep, all of these except the detent issue can apply to most basic mechanical guns (even the detent issue technically applies to any basic blowback, wearing out your detents is just generally not easily avoidable unless you're storing the gun with the bolt or the detents removed.)
I’m not sure if Alex made this video because of me. I phoned in last week cause I connected my T-15 DMR to my ninja Tank and was afraid it was going to blow up my house. But Alex came to the rescue and fixed it over the phone
lol not just you, its a super common thing.
@@tooootall for sure when it’s our first time using a paintball device and you have little to no instructions.
Thanks man big help
Thanks
👍
I just take the bolt and drive spring out and keep them in a zip lock bag
Thanks bruv
The higher quality paint the more brittle and softer the shell of the ball....you should know this.
Reverse what you know in Speedball/Recball and apply to MagFed. Harder shell works best in magazines, i.e. Valken Graffiti, because it does not deform under the magazines spring tension and high humidity. If your style is MagFed though, you should know this. Plus, FSR should be the go to for MagFed anyway.
@@gudmagz5924 I don't play magfed. If I wanted to play soldier, I would've gone in the infantry.
@@mikesheber2205 so you prefer to play with a goofy looking gun that makes it way easier? why don't you travel to mars and fight off aliens by your logic? I don't have issues with speed ballers but I have probs with lame ass people who reject us magfed players. It doesn't have shit to do with playing soldier. I like real guns, and it's the closet I can get to using them in a friendly and competitive environment. Pretty simple.
@@mikesheber2205 Seriously?? What kind of a comment is this?? XD
Springs lose life by being cycled and NOT by being left under tension.
what mag pouch do you recommend for the FS T15?
But what if your T15 is your home defense? I have six children and I chose to go non lethal to keep them safe.
Routine maintenance! If your maker stays on the ready which is obvious for home defense, you should change O-rings, springs etc. etc. every other month or so... because odds are you will probably never have to use it...Stay safe my friend
You talk about the spring but frankly how is that correct. I leave my real firearm mags loaded. A spring is made to be compressed and so on. Where is the evidence of the spring issue.
Real steel mags have different springs, the springs on paintball mags are significantly weaker, I've left one of my mags wound up and had to rebuild it.
Springs don't lose tension from being compressed. They lose tension from the number of cycles it has been compressed. If your springs are malfunctioning from being compressed for a long period of time, its from some other cause.
not sure where you're getting your info but a spring that is compressed over a long period of time absolutely becomes weaker. feel free to google it, plenty of info on the subject.
@@tooootall www.europeansprings.com/springs/technical-information-springs/spring-durability/ provides a good reading on the subject. Can a spring lose tension from being compressed for a long period of times, potentially. As long as a lot of other parameters are met such as high heat, compression beyond its elastic limit, and extreme lengths of time (years). Then once it loses a trivial amount of tension. Will the difference be enough to make a difference, almost always no. I own several Tiberius mags and have taken a break for a few years, they all work just fine. This also holds true for firearm magazines too. Now your part about detents, which are technically springs, is completely true. It has happened to be a few times from neglect on my part.
@@tooootall I'm with TooTall on this one.
Don't take it to school or walk around in public with it (especially mag fed).
T15? Or mfg 100?
Depends on your needs, a MG100 is a mechanical magfed speedball marker, while the T15 is moreso a AR-15 replica that shoots paintballs. Will tell you a full auto T15 is smile inducing.
Mg 100 is alittle more reliable but not a lot of upgrades but the t15 you have soo many upgrades like a full auto kit and it looks better but it’s mainly up to personal preference also you kinda will get frustrated with your t15 and eventually you’ll know what to do with it
@@matthewcorrea4278 i disagree. if you take care of it there should be no reason to be frustrated with a T15. mine is 5 years old and has seen hundreds of hours of use and still works like a dream.
@@tooootall oh I take care of my t15 no I was saying when parts break it takes forever to receive them they’re always out of stock for parts and the mags are the best mags but I can never get them to feed right. Also when I bought my full auto kit it broke my upper manifold and took me forever to get that part and that’s where the frustration came from just from parts never being in stock
@@matthewcorrea4278 ah i get ya. if you order parts from Defcon we almost always have them in stock. as for the mags not feeding right, have you checked the steel top plate for wiggling? thats usually the issue and i have a vid on how to fix that.
2:29 Definitely don't want to dimple my balls.
Lol....don't keep it cocked, loaded, or with the barrel in.
Well shoot. That kinda makes it a useless home defense weapon if you have to hand feed your mags, screw the barrel in and then cock it.....all before the bad guy gets you.
Ouch! I certainly wouldn’t want to dimple my balls!! 😳
I just remove the bolt itself after cleaning it I'll leave it in a zip lock with lube.
Carlos, I never understand why I should take the bolt out and store it separately.
Everybody said:"Oh, that is good, you have to."
Never heard that argument for other magfed markers. Do you?
Woohooo
Don’t shoot youself in the foot
Gov will ban these soon.... rip my brand new T15
In which country are you talking about?
@@tonyross4365 hey Tony. Look up bill C-21. I recommend looking it up with “air soft” to get the specification I was talking about. Government announced it about a week ago.
@@tonyross4365 Canada
@1:52, why, in general, magfed is poo. Really only good for shooting FSR.
say that to my TMC. Haven't had one single issue and I play with speedballers almost every damn weekend.
No? My T-15 has performed admirably ever since I got it. This isn't good logic.
69 views... nice
Sounds like junk