Nice Braptor! Love the painted grill and headlights! Just some advice from a bunch of us braptor owners here in Kcmo, get a true case saver from DRW Performance, those case savers do not do anything! Still let's the chain wad up, and that's what breaks the case. All of us in our group learned the hard way!
That's TM designs skid plate looks like it's made really good I like how anywhere where there is a bolt going through to fasten it they reinforced it seems to be a really good product.👍
Wow you just broke that C-clamb with your hands?😯 Nice video, the raptor is looking good with those new parts! The painted white plastics in the front seem to hold up great!👌
The only bad thing about skid plates is mud and dirt and rocks and leaves gets in between the motor and the skid plates and it’s hard to clean in between it,You need to get some skid plates on the control arms
Howdy I’ve got a few banshee parts you might like, lmk if your interested...? Tm case saver, complete cool head kit, o rings,studs,domes just for starters.
You say "old crappy skid plate" but in reality? A poly rear plate that doesn't permanently bend is probably better than a metal one that can bend into the rear sprocket or disc. They'll keep you protected from impacts to an extent without worrying about the skid bending and getting stuck rubbing things.
Instead of plugging the vent a my way of doing it is taking a plastic shop rite bag put it over the gas tank hole and then screw the cap on over the bag
My grandson and I have 2ea 2022 Yamaha Raptor's 700r SE and are looking everywhere for a case saver that has a sprocket cover. We found the DRW one but don't like the color choice. What other case savers would you recommend?
This one from TM Designs was not bad but realistically, DRW almost always has the best design for protection. UPP sometimes has similar designs to DRW and offers great protection too. You can contact Weston at DRW and tell him I sent you; he may be able to make a case saver for you in a different color. I know he can do black and white but it's possible he can do others.
Raptor is coming along nicely!! keen to buy one for the missus, with the Banshee is there a reason you’re not going to 68mm jugs? And make it a 421cc? Be a waste of a 4mil crank, you’d be better off getting a stock stroke crank with 68mm jugs slot of the power comes from porting/air flow..
Thanks man! As far as the banshee, I've been doing research and reading forums; from what ive read even a smaller bore 4mil build makes amazing power over stock. I'm not planning on an extended swing arm and from what I understand, even the way I plan to build it I will be either spinning or pulling the front end up the majority of the time.
Is it true that if you only replace one sprocket instead of front and back, it will wear out in no time. I’ve heard that you have to buy all new chain and sprockets at one time
I had a chance to buy one of these for 500 but I passed on it because the current owner bought it from someone else and it was completly tore down and he didn't know why.
There is a check valve in your gas cap. If it leaks when you tip it up like that your cap is bad. Man it was painful watching you loosen and tighten the chain. There is a hole in the carrier housing for that exact task.
This is true. Sometimes I try to do things different ways in different videos so people can see more ways to get the job done. Channel locks worked fine this time around.
All I’m saying is the way you take off/put on the master link KILLS me. 😂🤣 but you did show me a different way I guess😂🤣😂 bend it all to hell.. I love the gold chain though I’m gunna get one for mine
Are gonna power coat the raptor frame? Seems like you got some cancer forming on the bottom of the frame and some on the A arms. I planned to power coat my frame on my ktm quad.
Just bought a raptor 660r nerf bars nerf bars did not line up with the footpeg V lie had to drill an extra hole and then my front don't reach needing some help with it I live out in Dawsonville and I'm all good ways away from any small engine repair
Hey mike i just bought a 2007 raptor 700r special edition that seemed to be seized, didnt crank or roll in gear when I first got it home, the bike is extremely clean, its literally spotless, looks like a brand new bike, previous owner told me it has maybe 30 hours, so I removed the cap on the left side cover, and the spark plug, sprayed PB-blaster down the spark plug hole. and turned the engine over a few times with a ratchet, and got it to free up. So i put some new oil in it, a battery and fired right up. It sounds like a brand new bike, I rode it and it doesn't run funny or make weird noises ..really weird. Any suggestions what might of been wrong with it? It still starts right up and runs perfectly fine. Previous owner rode in pismo, possibly hydro-locked?. I'm kinda scared to fully open it up, I been just turning it on every few hours and letting it idle, and riding it slowly. Also forgot to mention he had a brand new 2 brother's exhaust and no airbox lid and didnt have it tuned, he gave me the stock exhuast and airbox lid so I put them back on before tryna ride it again.
Mike have you gotten to ride with the skid plates yet? I put an XFR skid on my 06' Raptor and got interference with the reverse lever and one of the skid plate bolts.
Hi, great videos! I want to ask you, how do you paint your pastics? My bike its staining with every ride, no matter how much I clean it after rides. Specially the engine, and It tooks me 2 hours to clean it good. How do you clean your bike so quickly? Thank you!
You should really be using a legit master link rivet style for the riding and terrain that you ride in. Just my 2¢. Otherwise the quads coming along real nice bro
Pro tip, Those chain lock are much easier to remove and put on by sliding them on and off. Nice quad bro
I just got a 2006 raptor 700 because of your videos.
I am always learning new things from you! Love it!
Oh man, this is an old one! Glad you enjoyed it!
Nice Braptor! Love the painted grill and headlights!
Just some advice from a bunch of us braptor owners here in Kcmo, get a true case saver from DRW Performance, those case savers do not do anything! Still let's the chain wad up, and that's what breaks the case. All of us in our group learned the hard way!
Hey man, thank you for the compliment! I was not aware of the DRW case saver. You live and learn I guess! Thank you for the heads up!
Great video! Informative with clear instructions 👍
The Raptor looks sick
@HAMDAN ALMAZROUEI omf xD
All u need now is some lower control arm skid plates. Looks great
Yes. 👍 Raptors are tops! Get em while u can. Yamaha may stop makin em.
I love your videos Mike you give me inspiration for my 2012 raptor love the colors keep up the good work,...👍
Great video Michael good to see u back on here
So When we hiting the trials lol
Love the touch of blue
That's TM designs skid plate looks like it's made really good I like how anywhere where there is a bolt going through to fasten it they reinforced it seems to be a really good product.👍
top notch content and explanations
Thank you!
Wow you just broke that C-clamb with your hands?😯 Nice video, the raptor is looking good with those new parts! The painted white plastics in the front seem to hold up great!👌
The only bad thing about skid plates is mud and dirt and rocks and leaves gets in between the motor and the skid plates and it’s hard to clean in between it,You need to get some skid plates on the control arms
Lets go so happy about the 4 mil man been asking you and finally your doing it keep the great work man its gona be a blast !!!
Nice work. Will be interested to see the Banshee build. In the middle of mine to since I cooked the top end!
Thanks Mike, very inspirational your constant is and your knowledge, thank you
Man ur vids are great. Thanks for sharing. Bike is looking sick
Awesome Mike 《☆》Happy to hear some Banshee news. Enjoying Raptor content as well ☻
Cool to know you like Raptors to
Howdy I’ve got a few banshee parts you might like, lmk if your interested...?
Tm case saver, complete cool head kit, o rings,studs,domes just for starters.
in the Rear axle hub you have a hole 27:17 minute you put a long rod there, stick out the wheel and turn the wheel and the chain pulls
Nice bike !!
Great vids.i have both myself 700 & banshee.
Awesome👍
Thank you man!
Great video keep up the good work man💯
Nice Job 🔥
Ken O’Connor racing is where u need to go
You say "old crappy skid plate" but in reality? A poly rear plate that doesn't permanently bend is probably better than a metal one that can bend into the rear sprocket or disc. They'll keep you protected from impacts to an extent without worrying about the skid bending and getting stuck rubbing things.
Its a good feeling coming back from riding, and you're quad is covered from front to back with some nasty shit lol.
Thanks!
Thank you so much for the super chat man!
Damn boy you strong
Very nice 👍🏎🙏📸
Instead of plugging the vent a my way of doing it is taking a plastic shop rite bag put it over the gas tank hole and then screw the cap on over the bag
My grandson and I have 2ea 2022 Yamaha Raptor's 700r SE and are looking everywhere for a case saver that has a sprocket cover. We found the DRW one but don't like the color choice. What other case savers would you recommend?
This one from TM Designs was not bad but realistically, DRW almost always has the best design for protection. UPP sometimes has similar designs to DRW and offers great protection too. You can contact Weston at DRW and tell him I sent you; he may be able to make a case saver for you in a different color. I know he can do black and white but it's possible he can do others.
We went with the 2 piece Tusk and Nice
Best quad you EVER had along w/ KFX 450R & Banshee!!! Forget them 250Rs lol 😆.
A great channel***
hey i wonder where a can buy the bracket that hold my reverse cuz its broken like most of the raptor
Awsome video bro
How has the chain been? it looked so sticky I would think it would really hold dirty and junk
Any issue with water, dirt, etc sitting in the skid plates and rusting out the frame ?
Great vid as always! Probably been asked already but what is the car under the cover?
I cant find any skid plates , case savers anything for my 2021 Raptor 700R will 2015-2020 fit on my 2021?
Raptor is coming along nicely!! keen to buy one for the missus, with the Banshee is there a reason you’re not going to 68mm jugs? And make it a 421cc? Be a waste of a 4mil crank, you’d be better off getting a stock stroke crank with 68mm jugs slot of the power comes from porting/air flow..
Thanks man! As far as the banshee, I've been doing research and reading forums; from what ive read even a smaller bore 4mil build makes amazing power over stock. I'm not planning on an extended swing arm and from what I understand, even the way I plan to build it I will be either spinning or pulling the front end up the majority of the time.
Awesome is the best
Is it true that if you only replace one sprocket instead of front and back, it will wear out in no time. I’ve heard that you have to buy all new chain and sprockets at one time
Keith Pruett might as well, thats what i do
You should for best wear. But dont have to...
I had a chance to buy one of these for 500 but I passed on it because the current owner bought it from someone else and it was completly tore down and he didn't know why.
You need to paint the frame it’s really really rusted
Can you install the factory cover over the top of the new case saver?
Michael what bars and risers do you have on the Yamaha Raptor 700?
They were from ebay - ruclips.net/video/kI30Nza95wg/видео.html
There is a check valve in your gas cap. If it leaks when you tip it up like that your cap is bad. Man it was painful watching you loosen and tighten the chain. There is a hole in the carrier housing for that exact task.
This is true. Sometimes I try to do things different ways in different videos so people can see more ways to get the job done. Channel locks worked fine this time around.
All I’m saying is the way you take off/put on the master link KILLS me. 😂🤣 but you did show me a different way I guess😂🤣😂 bend it all to hell.. I love the gold chain though I’m gunna get one for mine
How is the xfr skid plate doing for you?
How do you make the raptor 700 tall, I just added elkas 3 it’s the same
Are gonna power coat the raptor frame? Seems like you got some cancer forming on the bottom of the frame and some on the A arms. I planned to power coat my frame on my ktm quad.
Just bought a raptor 660r nerf bars nerf bars did not line up with the footpeg V lie had to drill an extra hole and then my front don't reach needing some help with it I live out in Dawsonville and I'm all good ways away from any small engine repair
Hey Michael what rebuilt kit did you get for your raptor I’m looking to buy one for mine I have a 2008 and from what website ?
Hey mike i just bought a 2007 raptor 700r special edition that seemed to be seized, didnt crank or roll in gear when I first got it home, the bike is extremely clean, its literally spotless, looks like a brand new bike, previous owner told me it has maybe 30 hours, so I removed the cap on the left side cover, and the spark plug, sprayed PB-blaster down the spark plug hole. and turned the engine over a few times with a ratchet, and got it to free up. So i put some new oil in it, a battery and fired right up. It sounds like a brand new bike, I rode it and it doesn't run funny or make weird noises ..really weird. Any suggestions what might of been wrong with it? It still starts right up and runs perfectly fine. Previous owner rode in pismo, possibly hydro-locked?. I'm kinda scared to fully open it up, I been just turning it on every few hours and letting it idle, and riding it slowly. Also forgot to mention he had a brand new 2 brother's exhaust and no airbox lid and didnt have it tuned, he gave me the stock exhuast and airbox lid so I put them back on before tryna ride it again.
Hey bro how’s the hot rod crank shaft doing? Thank you for the good videos and good content!!! 👍🏼
Would that case saver fit on a 15t sprocket? And if not what do u recommend?
My raptor stalls when you press the throttle the tps checked out fine any hints?
Mike have you gotten to ride with the skid plates yet? I put an XFR skid on my 06' Raptor and got interference with the reverse lever and one of the skid plate bolts.
Put some nerf bars on it too !!!
What was that tool used to loosen/move the sprocket carrier forward?
I have an ome piston that's hits the crank and I don't know what to do
What is that bumper on raptor
Hi, great videos! I want to ask you, how do you paint your pastics? My bike its staining with every ride, no matter how much I clean it after rides. Specially the engine, and It tooks me 2 hours to clean it good. How do you clean your bike so quickly? Thank you!
Will you rebuild the banshee?
Yes, it's happening soon.
You should really be using a legit master link rivet style for the riding and terrain that you ride in. Just my 2¢. Otherwise the quads coming along real nice bro
and what wrench did you use to adjust chain
Monkey wrench
What tires are those?
what tires are they
Where did you get those risers at?
What year of raptor is this?
Okay but i really recommend getting a chain cutter bro.
Thats just unnecessary work.
21:38 LOL
Please do a Yamaha YFZ450 next!
Take care of your bikes
That quad is not dirty you should see my raptor lol
What do you use to record?
Promotoo where are you at?😉
Mxrider2stroke Braaap ayyy
cool quad! love ur vids, but thats not the right way to put on a master link
Before I do that, I’m going to find something EVEN HEAVIER to DEADLIFT!!
27:02 that is not how to instal a master link. You have to slide it on inline with the chain. Can’t really explain it well here.
Another know it all put up a video about it if you are so much better !!!
24:20 😂🤣🤦♂️
I cant with that
First off, get rid of that HMF and put a set of Barker’s Duals
What’s in the big bok😂🥵
19:15
I’ve got the same pressure washer lmao
clean rust on the frame :/
Dont you have to clean a new chain with gasoline?
That's what she said lol
19:15
Scraptor*****
I absolutely love our Raptors. Check it out! ruclips.net/video/fhBIek3bRZ0/видео.html
The frame's rusted to shit...
Jjj