This is very helpful, thanks so much for sharing. Did you add all of the final paint finishes before or after you attached the hinge arms to the pies and panels? I realize it may require some additional sanding on the pies in order for the hinge mechanisms to clear properly, so I'm currently debating the order of operations. I'm at the point where all of my dome pieces are ready for the final coat of paint and clear coat. My instinct is to perform a dry fitting and glue the arms/servo mounts in place where they should be, then detach the hinge arms from the servo mounts and add the final coats of paint to the pies and panels. Curious how you approached this.
No I got the mounts from Amazon nuoshen 100 PCS Cable Tie Mounts,Self Adhesive Cable Tie Base Holders Zip Tie Mounting Base with 100 PCS Cable Tie www.amazon.co.uk/dp/B0834LZST2/ref=cm_sw_r_cp_api_i_DPSBGZA3EY95F06D60RC?_encoding=UTF8&psc=1
Thanks :)
This is very helpful, thanks so much for sharing. Did you add all of the final paint finishes before or after you attached the hinge arms to the pies and panels? I realize it may require some additional sanding on the pies in order for the hinge mechanisms to clear properly, so I'm currently debating the order of operations. I'm at the point where all of my dome pieces are ready for the final coat of paint and clear coat. My instinct is to perform a dry fitting and glue the arms/servo mounts in place where they should be, then detach the hinge arms from the servo mounts and add the final coats of paint to the pies and panels. Curious how you approached this.
Hi sorry for the delay on this, I dry fitted first then painted then added clear coat and then put back together
Cool! Nice show of the real estate. Thanks for the links. Where did you get the ziptie mounts? Thingiverse?
No I got the mounts from Amazon nuoshen 100 PCS Cable Tie Mounts,Self Adhesive Cable Tie Base Holders Zip Tie Mounting Base with 100 PCS Cable Tie www.amazon.co.uk/dp/B0834LZST2/ref=cm_sw_r_cp_api_i_DPSBGZA3EY95F06D60RC?_encoding=UTF8&psc=1
@@norwichdroids Ah! Thanks for that. I wasn't looking forward to trying to print 100+ of the silly things.
Great video! Can you post a link to those servo pivots you got in the description? Might be helpful.
Hi the dome servos hinges I used were these www.thingiverse.com/thing:2797760
@@norwichdroids you mentioned something you got on amazon?
@@BigPeteCosplay yes it was the servo pushrods sourcing map 10pcs Adjustable... www.amazon.co.uk/dp/B08M9QVGY5?ref=ppx_pop_mob_ap_share
Hi where did you find those servo holders for holo light
Hi I got them from thingverse I will get the link for you
www.thingiverse.com/thing:2805674
@@norwichdroids thanks so much
@@timopaso6444 no problem let me know if you need anything else