I am using EMS to design and simulate AFPMG. I have a question regarding coils in schematics. Do we have to put resistors on the side where there is the dot on the coil or we can put them on any side. The reason why I am asking this question is because I get current 180 degrees shifted from voltage, but in my calculations they should be shifted a lot less. Thanks for help and congratulations on great software.
Hello, Please have a look on the following webinar: ruclips.net/video/xAUV4kMRgb4/видео.html&ab_channel=EMWorksInc. It contains more details about EMS circuit coupling. If you have other questions, please email us at: support@emworks.com/ majdi@emworks.com. we will be happy to help you. Thanks
These designs are mine I've perfected them years ago but I've invented a totally different one not even known to any of you? It's not being talked about because I've not been benefited for what your already using of mine.
You can't perfect a design for a machine topology that has an infinite number of potential applications. Each application needs a design that is optimised for the application. The axial flux motor was invented by William Sturgeon in 1823. His earliest design was an axial flux motor; radial designs came later. So the topology you claim to have invented was actually invented by a Brit many years before you were born. With the level of knowledge of electrical machine design that we had by the end of 19th century, no Patent Office would accept an axial flux generator as novel or non-obvious in the 20th Century.
@@tlangdon12 Yes there were prior Designs but I still proved them all totally self destructive and will never be worth using as they destroy their magnets after a short time making them crap to the unsuspecting victims who purchased them
It's called the Attraction Generator I've already put a patent pend years ago but it never was enjoyed till it was stolen by everyone you don't have what I've learned so you will fail as my motor self charging generator will not be offered to anyone till I am compensated for it
That generator Is my design have a motor design that's super fast high power no heat design also returns it's used power to the source charges the batteries instead of consumption try that after stealing my designs
@@Eng_Simoes I invented perfected it you probably don't even use the right Coil design I am so far past you I've tested hundreds of designs multiple Units Wired every way possible your talking to the master of that technology you don't even come close to my knowledge or other designs that don't have resistance and cause AC affect in it's coils cooling instead of heating I am the Master of all designs and my price is way over your check book
@@Eng_Simoes I put the first Patent Pending on it many years ago and was on the News showing it and gave a proven Generator to Tesla many years ago I pack evidence what you got?
@@Eng_Simoes For first of all your Cores are way to short your coils are wrong or you could mine spins easier when Loaded down and is 640% over Unity and?
![[Webinar Recording] - Effects of Magnet Segmentation on Permanent Magnet Motor Performance](http://i.ytimg.com/vi/JSsf2_WFEoE/mqdefault.jpg)
![[Webinar Recording] - Effects of Magnet Segmentation on Permanent Magnet Motor Performance](/img/tr.png)
Good job!
This is very interesting, do you have any clients in south africa? Maybe I could use a seat of their product.
I am using EMS to design and simulate AFPMG. I have a question regarding coils in schematics. Do we have to put resistors on the side where there is the dot on the coil or we can put them on any side. The reason why I am asking this question is because I get current 180 degrees shifted from voltage, but in my calculations they should be shifted a lot less.
Thanks for help and congratulations on great software.
Can i get ur mail id. I need this software
from where i can get 3d model of axial flux generator?
Hi, how do u do circuit in EMS?? Can u show a full tutorial on this current video? I seem many step had been skipped T_T
Hello,
Please have a look on the following webinar: ruclips.net/video/xAUV4kMRgb4/видео.html&ab_channel=EMWorksInc.
It contains more details about EMS circuit coupling.
If you have other questions, please email us at: support@emworks.com/ majdi@emworks.com. we will be happy to help you.
Thanks
how to get the result voltage this simulation? Thanks
Hi,
I could not find the tutorial
Hi Demas, do you still need help in this? please let me know. Thanks
These designs are mine I've perfected them years ago but I've invented a totally different one not even known to any of you? It's not being talked about because I've not been benefited for what your already using of mine.
You can't perfect a design for a machine topology that has an infinite number of potential applications. Each application needs a design that is optimised for the application. The axial flux motor was invented by William Sturgeon in 1823. His earliest design was an axial flux motor; radial designs came later. So the topology you claim to have invented was actually invented by a Brit many years before you were born. With the level of knowledge of electrical machine design that we had by the end of 19th century, no Patent Office would accept an axial flux generator as novel or non-obvious in the 20th Century.
@@tlangdon12 Yes there were prior Designs but I still proved them all totally self destructive and will never be worth using as they destroy their magnets after a short time making them crap to the unsuspecting victims who purchased them
@@tlangdon12 Heat is always a problem as well hot as melting iron so you can't keep them from melting down as they are the same as an induction oven
It's called the Attraction Generator I've already put a patent pend years ago but it never was enjoyed till it was stolen by everyone you don't have what I've learned so you will fail as my motor self charging generator will not be offered to anyone till I am compensated for it
how to buy your software?
Hello Mr. Ravi,
please contact us via our website. www.emworks.com/contact
After receiving your request our representative will contact you. Thanks
Unless you know how my Coils are made you will never have my Results
That generator Is my design have a motor design that's super fast high power no heat design also returns it's used power to the source charges the batteries instead of consumption try that after stealing my designs
I'm assuming you're not a trained electrical engineer. This is a very basic design well understood by any undergrad in the field
@@Eng_Simoes I invented perfected it you probably don't even use the right Coil design I am so far past you I've tested hundreds of designs multiple Units Wired every way possible your talking to the master of that technology you don't even come close to my knowledge or other designs that don't have resistance and cause AC affect in it's coils cooling instead of heating I am the Master of all designs and my price is way over your check book
@@Eng_Simoes I put the first Patent Pending on it many years ago and was on the News showing it and gave a proven Generator to Tesla many years ago I pack evidence what you got?
@@Eng_Simoes For first of all your Cores are way to short your coils are wrong or you could mine spins easier when Loaded down and is 640% over Unity and?