Would be cool to see you make a split-pin crankshaft and accompanying camshafts to turn it into a proper boxer engine, so it won't shake itself to death from the crazy rocking couple caused by the shared crankpins
@@allenl9031 Yeah not quite the same there, 'flat' is referring to crankshaft setup for horizontally opposed engines, flat engines use shared crank pins for opposed pairs like a V engine, Boxer refers to those being 180 degrees apart so the pistons move opposite to each other and cancel out more of the vibrations making it smoother, both setups are still flat plane.
9:58 I think it's because that belt is stretching out and the slack is getting pulled into the fan. You can see it stretching the first time it runs during revs.
but you don't really see it getting pulled into the fan, I suppose its just because of the high rpm. the pulley ratio is rather big so that fan is spinning like twice the speed of the engine
i was just thinking about setting up a somewhat bright nightlight in the bedroom, h7 seems like a good idea but i didnt know how to power it without some awful power adapter. this seems to be the perfect solution, the wife's going to love it!
I believe the reason the fan broke is bc if you look @6:18 you can see that as you rev the engine the fan belt starts expanding quite a lot, I'm sure the belt came off the pulley and got sucked into the fan and caught between the fan blade & shroud. I miss this kind of content, while I like seeing these different engines being run its nice to see them do some work rather than just a static run test. Hoping for more videos like this in the future! 👍👍
Still wouldn't sound quite right unfortunately, Subaru and VW are specifically boxer 4's. Boxers are flat, but not all flat are boxers. Boxers have the opposing pistons synchronised to reach TDC/BDC at same time as each other whereas you can see on this crankshaft the piston on the left reaches TDC at the same time as the piston on the right reaching BDC
You mean that vomit inducing sound that makes me that accepts that people have different tastes in car culture than me and respects that fucking hates with a passion
It won‘t rumble, it‘s a flat 4, not a boxer. Flat 4 is basically a 180 degree V, two pistons share a crankshaft pin. Boxers have a pin for each piston, which means the movement is different.
@@Phrewthat literally has nothing to do with the rumble sound caused by the unequal length of the exhaust header. The Shelby gt350 is a flat plane v8, but it doesn't sound like a flat plane v8 because they use unequal length headers.
This is what i missed, doing something with these engine builds! I love watching your modifying and/or use of these engines in something other than a static display. Looking forward to "something larger is coming!"
Rather than metal rings, probably would've made this work with teflon ones. It rides better, seals better, doesn't wear as much and there's never enough heat in such an engine to touch the teflon. Back in the day, it was my favorite method to make a very long term flying (endurance race) RC. Also, they keep using flat pistons, but just like the real deal, shaped heads have better ignition, heat distribution and compression.
This thing is just the ultimate cuteness! I'd love to see you hook it up to a car or rc truck and see how competitive it is. Flat 4 and 6 engines are such runners...
@@albinklein7680 The boxer engine is a flat engine, belonging to the type of internal combustion engine. The engine pistons are arranged horizontally and symmetrically on each side of a central rotating crankshaft. When operating, they move continuously and in opposite directions, transfer force to the crankshaft, helping the crankshaft to move. It’s called “boxer” because the way the pistons move is like a boxer throwing punches. You have just learned something today.
Good call on trying to find out power output, you can always improve it in the future, with big resistor for exemple and trying to find out the efficiency of the system On the Toyan FS-L400, same number of cylinder, fuel and displacement, they give the power output of 3.05hp, so 2200 watts... yeah, right...
Yep. Watching in .25 speed @ 4:00-:03, the cams both move with "left" cam moving the most. The timing marks should be more precisely located and indicated so all builders can get valve timing right the first time.
the opposing pistons always move to another or away from another. the crankshaft would look a lot different. this here is the same as a V engine, only not at 60° or so, but at 180°@@DavidGragg82
4:37 could probably make a quick and dirty C shaped cradle that goes in that gap and hugs the crank case, affixed in place with the existing leg bolt(s). From it, simple flat legs could come out that later could be engine mounts (for example). You could use the rubber isolators used for radios, test equipment (you can find them online with "vibration isolator electronics").
cool engine kit! it sounds better than every Porsche I currently own. I could spend small fortunes for “better” exhaust notes, but I never do. I’m a huge fan of 6 cylinder boxers for their performance, but my 2.0L 4 cyl VW/Porsche sounds best at higher RPMs 3.2L swapped ‘75 911S Coupé ‘01 3.4L 996 Cabriolet ‘75 2.0L 914-4 Targa
@@bigpig187 thanks, BigPig…you sent me to school (online), where I learned from looking at crank/stroke/firing diagrams of Flat vs. Boxer engines; and I’ve been flying 4 & 6 cylinder Continental & Lycoming engines for over 25 years. I assumed all flat engines were “horizontally-opposed ‘boxer’ engines,” and were all similar. I thought my 2.0L 914 engine was a Flat-4, since it was more VW than Porsche; and I’ve always believed VWs to be flat-4s. so, as a 45yr old in 2023, I now see that those mid-‘70s VWs were boxers, after that reply piqued me brain. *Thank You* I’m sincere & not some sarcastic YT comment section jerk now, I wanna look into which U.S. market autos feature(d) Flat-4s as opposed to Boxer-4s…like a Fiero. WTH was that guy running? thanks again, Dude.
@@corporalclegg914 Wow that's the best reply i had in years ! Usually when i bring this up peoples just tell me "duh it's the same why are you confusing peoples ?" even when i explain that a boxer is suposed to have opposed pistons at bottom dead center at the same time. I think most planes are flat-4 (and 6) because the crankshaft is simpler and thus more reliable, at the cost of a less balanced engine. Porsche did make a flat engine but the only one i can think of is the 917's flat-12. Being in EU i'm not sure wich US cars are flat 4 and it's not so easy to find out even when you know what to look for. I was thinking about the Corvair but nope, it's a boxer. I'm happy i could help you learn something (even with 20 years less^^) and clarify this common misconception !
It's like Christmas, Birthday, Easter, Thanksgiving, Halloween together.. Can't wait until you upload a new video 🤪🤪🤪 Greetings from the Swiss Alps 🤪🤣🤘
Sadly it’s a flat four (like a flat V essentially) not a boxer 4 like a subaru due to the shared crank connection. You would have noticed that opposing pistons reach TDC/BDC at the same time respectively so you’d get pistons 1&3, 2&4 firing in sync rather than in an order like a subaru
Круто !!! Мне нравятся оппозитные моторы !!! Есть в них что-то такое.... Думал опять какая-нибудь пневматическая игрушка, но оказалось что нет. Нормальный мотор !
Relly has good footage and an excellent "dyno setup" Well I sort of talked about that idea 9 months ago, in a coment I made, a bit tricky but very nice. I'm an electrician and we use dry resistant or a dry generator coupled like that set up for engine-generator tests and it's good to test temperature and horsepower/ consumption. Just need to make a conversion on the load/ Jules/power output/ time. You have charts conversions online. Very nice 👌
I have suggestion/request. I think that building a ship with a real miniature engine would be a very interesting idea. It might not be possible due to some reasons. It might be out of your area of expertise, not the right parts available, project would take too long or wouldn’t be an interesting build but I thought it might be worth sharing.
I was trying to figure out whether this was a VW style boxer, or the "modern" Subaru boxer style. After seeing the overhead cams, I'm thinking the model designers decided to take a bit of both and build a Frankenstein engine of the two. It's "technically" an air-cooled Subaru, but I could be wrong.
Ypu should build a Race car of your own choice, with one of your engines.. maybe a v12 👍 And to top it off, make a Hybrid system to the car.. would be so amazing 💪 keep up the good work man 💪👍
That is so crazy... those piston rings tho... does the gap close up? they seamed to have an awefully big gap in them... So amazing how it is a REAL ICE and has a lot of the exact same componants, just shrunk down!!! I get so amazing watching these and would love to own a bunch of these myelf, but this would be a hobby that got out of control and my wife would kill me for spending that kind of money on a small engine, LOL.
that engine will not cool properly as much of the heat of combustion is contained in the cylinder heads, there is very little cooling fin area on the heads and the fan shroud directs air only to the cylinders themselves. I guess I can't speak for the operating temperature of these little multi cylinder engines but all my airplane nitro engines run cooling fins on the heads, and every single air cooled small gasoline engine I have in my collection has air flow through the cylinder heads.
This is so close to being perfect. I think it should be OHV not SOHC and have a proper oiling and ignition system so it could have a better chance to sound like a old VW Beetle. Other wise very fun video.
Wouldn't it be great if the manufacturer actually supplied the right parts and to a decent build standard so that everything fitted and worked as intended without breaking or requiring a bunch of work-arounds. It seems to be a recurring theme with these kinds of engine kits. I love the videos though. You have amazing skills.
I Honestly been waiting for a boxer style miniature engine to be released, now my wife gonna yell at me in a few weeks 😂 (Please make an unequal length EJ header and maybe a catback exhaust, make it sound more like a Subaru boxer that would be epic)
You were getting 90 watts of electricity, but the test setup was probably only around 50% efficient, with diodes dropping volts and so forth. You were probably getting a lot more, and I would think this engine should make a few HP, not?
I just ran mine through a 3rd tank. This engine is amazing when the carbs are set right! Beautiful engine too! Though yer two cam dots faced down and it still ran. Mine were faced straight up. And it ran. This is weird.
Would be cool to see you make a split-pin crankshaft and accompanying camshafts to turn it into a proper boxer engine, so it won't shake itself to death from the crazy rocking couple caused by the shared crankpins
Flat engines are designed like that tho, thats what makes it a flat engine and not a boxer
@@gundamned4879 Flat plane crank, like the Corvette Z06, which sounds awesome.
nop not the same thing@@allenl9031
Well, the engine is tiny it could be a 1 can thumper and still rev to 30,000
@@allenl9031 Yeah not quite the same there, 'flat' is referring to crankshaft setup for horizontally opposed engines, flat engines use shared crank pins for opposed pairs like a V engine, Boxer refers to those being 180 degrees apart so the pistons move opposite to each other and cancel out more of the vibrations making it smoother, both setups are still flat plane.
That cooling fan looks so cool. Reminds me of an air cooled 911 engine.
love the load testing as well demonstrates its really weight carrying capacity
9:58 I think it's because that belt is stretching out and the slack is getting pulled into the fan. You can see it stretching the first time it runs during revs.
but you don't really see it getting pulled into the fan, I suppose its just because of the high rpm. the pulley ratio is rather big so that fan is spinning like twice the speed of the engine
i was just thinking about setting up a somewhat bright nightlight in the bedroom, h7 seems like a good idea but i didnt know how to power it without some awful power adapter.
this seems to be the perfect solution, the wife's going to love it!
I believe the reason the fan broke is bc if you look @6:18 you can see that as you rev the engine the fan belt starts expanding quite a lot, I'm sure the belt came off the pulley and got sucked into the fan and caught between the fan blade & shroud.
I miss this kind of content, while I like seeing these different engines being run its nice to see them do some work rather than just a static run test. Hoping for more videos like this in the future! 👍👍
This has to be one of my favorite toyan models! I own the first FS-S100A and it still runs amazing after almost 3 years.
Can we expect a set of UEL headers to get that signature rumble sound ?
Still wouldn't sound quite right unfortunately, Subaru and VW are specifically boxer 4's. Boxers are flat, but not all flat are boxers.
Boxers have the opposing pistons synchronised to reach TDC/BDC at same time as each other whereas you can see on this crankshaft the piston on the left reaches TDC at the same time as the piston on the right reaching BDC
You mean that vomit inducing sound that makes me that accepts that people have different tastes in car culture than me and respects that fucking hates with a passion
It won‘t rumble, it‘s a flat 4, not a boxer.
Flat 4 is basically a 180 degree V, two pistons share a crankshaft pin. Boxers have a pin for each piston, which means the movement is different.
@@Phrew It will. even an inline 4 will rumble with UEL headers.
@@Phrewthat literally has nothing to do with the rumble sound caused by the unequal length of the exhaust header. The Shelby gt350 is a flat plane v8, but it doesn't sound like a flat plane v8 because they use unequal length headers.
This is what i missed, doing something with these engine builds! I love watching your modifying and/or use of these engines in something other than a static display. Looking forward to "something larger is coming!"
Ikr theyre so cute especially the overhead camshaft was so small!!
Rather than metal rings, probably would've made this work with teflon ones. It rides better, seals better, doesn't wear as much and there's never enough heat in such an engine to touch the teflon. Back in the day, it was my favorite method to make a very long term flying (endurance race) RC. Also, they keep using flat pistons, but just like the real deal, shaped heads have better ignition, heat distribution and compression.
I was just thinking about your audience. Probably us who actually enjoy building things, engines. Cool so see such a tiny thing work.
Looks like the air cooled 911 look. Would be sweet to see a flat 6
Hey if you didnt see it, on the Adam Savage Tested channel, they recently went to a makers fair and were showing some pretty amazing little engines.
That is one of the best sounding engines out of the box !
This guy is going to aquire all possible knowledge of cars and build us the ultimate RC vehicle no DIY person has done before
This thing is just the ultimate cuteness! I'd love to see you hook it up to a car or rc truck and see how competitive it is.
Flat 4 and 6 engines are such runners...
I wasn't expecting this a flat 4 miniature engine. This is interesting.
Love the generator idea. Make it so it can be used to charge a car battery then run an inverter off it so you can run stuff in an emergency
When I saw the title, I was thinking that it would be a subaru type boxer engine, but no, because the crankshaft is different.
Imagine a miniature VW Beetle with this engine, so cool
My first thoughts exactly !
Dune Buggy with visible engine.
it would be awesome if you could also get the "tweet" note out of the exhaust!
It will never be a Beetle because this is not a Boxer engine.
@@albinklein7680 The boxer engine is a flat engine, belonging to the type of internal combustion engine. The engine pistons are arranged horizontally and symmetrically on each side of a central rotating crankshaft. When operating, they move continuously and in opposite directions, transfer force to the crankshaft, helping the crankshaft to move. It’s called “boxer” because the way the pistons move is like a boxer throwing punches. You have just learned something today.
This little jewel would be perfect driving, for example, a Porsche 550 Spyder, the one owned by James Dean. Congratulations, it's beautiful!
Those torque click shots are what i’m really here to see.
Good call on trying to find out power output, you can always improve it in the future, with big resistor for exemple and trying to find out the efficiency of the system
On the Toyan FS-L400, same number of cylinder, fuel and displacement, they give the power output of 3.05hp, so 2200 watts... yeah, right...
It's really the brand that best manufactures its production, offering excellent value for money.
That’s awesome! But the single rotor rotary engine spins at over 30,000 rpm.. imagine a miniature 4 rotor!
Yeah I noticed when you put the timing belt on after tightening it the crank mark was out by one tooth. 3:57 it moves after tightening it
Yep. Watching in .25 speed @ 4:00-:03, the cams both move with "left" cam moving the most. The timing marks should be more precisely located and indicated so all builders can get valve timing right the first time.
Too bad it's not a boxer
How is it not?
@@DavidGragg82cylinders are not opposed. It's a flat 4, not a boxer 4
@@Giuliana-w1f yep telltale sign is that a boxer doesn’t share crank pins
the opposing pistons always move to another or away from another. the crankshaft would look a lot different.
this here is the same as a V engine, only not at 60° or so, but at 180°@@DavidGragg82
Naw man why would you wanna have to deal with a blown head gasket on your model engine 😂
Would be GREAT to install in an Vintage Vw Buggy RC Car!!!
Hmmmmmmmm a nice Porche build with this engine would be stunning O.O
that thing is awesome, I love how the fan is directed to blow right on the block
Now, combine 3 of them and build a Ferrari 312T2 around it!
4:37 could probably make a quick and dirty C shaped cradle that goes in that gap and hugs the crank case, affixed in place with the existing leg bolt(s). From it, simple flat legs could come out that later could be engine mounts (for example).
You could use the rubber isolators used for radios, test equipment (you can find them online with "vibration isolator electronics").
cool engine kit! it sounds better than every Porsche I currently own. I could spend small fortunes for “better” exhaust notes, but I never do. I’m a huge fan of 6 cylinder boxers for their performance, but my 2.0L 4 cyl VW/Porsche sounds best at higher RPMs
3.2L swapped ‘75 911S Coupé
‘01 3.4L 996 Cabriolet
‘75 2.0L 914-4 Targa
The sound is different because it's a flat-4 not a boxer
@@bigpig187 thanks, BigPig…you sent me to school (online), where I learned from looking at crank/stroke/firing diagrams of Flat vs. Boxer engines; and I’ve been flying 4 & 6 cylinder Continental & Lycoming engines for over 25 years. I assumed all flat engines were “horizontally-opposed ‘boxer’ engines,” and were all similar.
I thought my 2.0L 914 engine was a Flat-4, since it was more VW than Porsche; and I’ve always believed VWs to be flat-4s.
so, as a 45yr old in 2023, I now see that those mid-‘70s VWs were boxers, after that reply piqued me brain.
*Thank You* I’m sincere & not some sarcastic YT comment section jerk
now, I wanna look into which U.S. market autos feature(d) Flat-4s as opposed to Boxer-4s…like a Fiero. WTH was that guy running?
thanks again, Dude.
@@corporalclegg914 Wow that's the best reply i had in years !
Usually when i bring this up peoples just tell me "duh it's the same why are you confusing peoples ?" even when i explain that a boxer is suposed to have opposed pistons at bottom dead center at the same time.
I think most planes are flat-4 (and 6) because the crankshaft is simpler and thus more reliable, at the cost of a less balanced engine.
Porsche did make a flat engine but the only one i can think of is the 917's flat-12.
Being in EU i'm not sure wich US cars are flat 4 and it's not so easy to find out even when you know what to look for. I was thinking about the Corvair but nope, it's a boxer.
I'm happy i could help you learn something (even with 20 years less^^) and clarify this common misconception !
These companies that make these engines should make a little diesel one that would be cool
Absolutely beautiful piece of engineering.
Today's a better day now, JohnnyQ90 fix, time to build a Subaru WRX Monster with that flat four.
So hype for the coming dyna !
Thanks for the vid.
It's like Christmas, Birthday, Easter, Thanksgiving, Halloween together.. Can't wait until you upload a new video 🤪🤪🤪 Greetings from the Swiss Alps 🤪🤣🤘
Make a normal 4-2-1 collector, this will sound like subaru!
I'm currently rebuilding my Lancia Gamma engine... this looks oddly familiar ^^
The mini motor master back at it
I wish these were more affordable for a non-RUclipsr
The level of detail on these components is staggering ..
You have videos like therapy
Piston rods on boxer engine shouldn't share same rod journals... This would be a 180° V4/Flat V-4.
Wish it was a TRUE Flat 4 = Boxer engine. It is 'just' a 180° V4, sounds like it too. Thanks for sharing!
As an STI owner, I approve.
Sadly it’s a flat four (like a flat V essentially) not a boxer 4 like a subaru due to the shared crank connection. You would have noticed that opposing pistons reach TDC/BDC at the same time respectively so you’d get pistons 1&3, 2&4 firing in sync rather than in an order like a subaru
180˚ V4... I’m still waiting for the miniature NR engine 😊
@@cespa4206 oohh i didnt know that!! thanks for pointing it out!!
@@TumzDK ahhh ok thx, you'd think I'd know the difference lol.
Alright! You are making a dyno!! I love your videos!
Круто !!!
Мне нравятся оппозитные моторы !!!
Есть в них что-то такое....
Думал опять какая-нибудь пневматическая игрушка, но оказалось что нет. Нормальный мотор !
I love these vids so much. Been watchin forever. Thanks for all the awesome content 🤘🏻🤘🏻🤘🏻
Relly has good footage and an excellent "dyno setup" Well I sort of talked about that idea 9 months ago, in a coment I made, a bit tricky but very nice. I'm an electrician and we use dry resistant or a dry generator coupled like that set up for engine-generator tests and it's good to test temperature and horsepower/ consumption. Just need to make a conversion on the load/ Jules/power output/ time. You have charts conversions online. Very nice 👌
OMG ITS PERFECT... for a Impreza build.
Great videos. Would you post a link to the tools you use please? Thanks! Most interested in the cordless screwdriver and torque screwdriver.
I have suggestion/request. I think that building a ship with a real miniature engine would be a very interesting idea. It might not be possible due to some reasons. It might be out of your area of expertise, not the right parts available, project would take too long or wouldn’t be an interesting build but I thought it might be worth sharing.
Rc plane build with this engine? Might need to machine off some material to save weight but if anyone could do it you could!
Would be nice to have smaller ring gaps and a lot less deck height. Toyan have come a long way though
gotta put that in a 1980 aircooled porsche 911 rc model. nice build.
I was trying to figure out whether this was a VW style boxer, or the "modern" Subaru boxer style. After seeing the overhead cams, I'm thinking the model designers decided to take a bit of both and build a Frankenstein engine of the two. It's "technically" an air-cooled Subaru, but I could be wrong.
Thank you man for this awesome history about out sports. Will be waiting for for. Thanks once more
9:58
Something “hit the fan” whilst showing off 😂
Mini subaru RC car possibly???? Subarus are my favorite and I'd love to see tiny little UEL headers.
The company needs to build a 1900cc E85 version thats fits into a VW beetle
You have a great life Mr Q
Now imagine making a scale size sand rail with this in it.
i rely miss seeing you mod RC cars
That crank makes it a 180° v4
Ypu should build a Race car of your own choice, with one of your engines.. maybe a v12 👍 And to top it off, make a Hybrid system to the car.. would be so amazing 💪 keep up the good work man 💪👍
That is so crazy... those piston rings tho... does the gap close up? they seamed to have an awefully big gap in them... So amazing how it is a REAL ICE and has a lot of the exact same componants, just shrunk down!!! I get so amazing watching these and would love to own a bunch of these myelf, but this would be a hobby that got out of control and my wife would kill me for spending that kind of money on a small engine, LOL.
Hey, I have been wondering all these videos, what torque screwdriver are you using?
thats a 180° v-engine. while being a "flat engine" its not what most people expect. its not a boxer
😮😮😮 I know what I want for Christmas
Bro make flat 4 into flat 6😊
looks more like a boxer engine, very very cool!
Assembly time? Looks so cool!!
Κάθε ένας κινητήρας και πιο όμορφος....!
man, I could power my Steamdeck with this thing!
What were the engine temps like with the fan cooled engine?
Be careful the EPA might go after you for your emissions.
please for the love of god make a Porsche model to stick this into!!!!!!
that engine will not cool properly as much of the heat of combustion is contained in the cylinder heads, there is very little cooling fin area on the heads and the fan shroud directs air only to the cylinders themselves. I guess I can't speak for the operating temperature of these little multi cylinder engines but all my airplane nitro engines run cooling fins on the heads, and every single air cooled small gasoline engine I have in my collection has air flow through the cylinder heads.
We need some cam adjustment so its firing a tad bit more early so it rumbles on idle
This is so close to being perfect. I think it should be OHV not SOHC and have a proper oiling and ignition system so it could have a better chance to sound like a old VW Beetle. Other wise very fun video.
Wouldn't it be great if the manufacturer actually supplied the right parts and to a decent build standard so that everything fitted and worked as intended without breaking or requiring a bunch of work-arounds. It seems to be a recurring theme with these kinds of engine kits.
I love the videos though. You have amazing skills.
745.7 watts per horsepower puts this lil guy at a staggering 1/8th of a horsepower.
need an 1/4 80s porsche and a light platform to make it a rocket
I Honestly been waiting for a boxer style miniature engine to be released, now my wife gonna yell at me in a few weeks 😂
(Please make an unequal length EJ header and maybe a catback exhaust, make it sound more like a Subaru boxer that would be epic)
It’s not a boxer motor. It’s a flat 4.
This Chanel is amazing
You can find the hp if you messure the watt output of the generator but don't forget the power loses
If this goes in a car body, needs to be a subi. I know its not a boxer but still a flat 4
What brand of torque wrenches do you use ? thanks
Now 2 of these together for a Flat 8
You were getting 90 watts of electricity, but the test setup was probably only around 50% efficient, with diodes dropping volts and so forth. You were probably getting a lot more, and I would think this engine should make a few HP, not?
I just ran mine through a 3rd tank. This engine is amazing when the carbs are set right! Beautiful engine too! Though yer two cam dots faced down and it still ran. Mine were faced straight up. And it ran. This is weird.
It will almost always run because it needs no spark timing due to the glow plugs.
@@albinklein7680 yeah I know. Not my only nitro engine I've had. Mainly focused on valve timing. As those do need to open at a set time
Do you have turbo Diesel engine
Every time I watch these, I think, “and how can I frame that into a R/C boat”?
i had it hard all the time please explain : why don't you put some cream on them head pad first before mounting every head?
I hope there’s a flat 8 made at least in the miniatures.
Thanks Johnny 👍🏻👍🏻👌🏻
Hello! What’s your usual setting for your torque screwdriver?
Nice Boxxer Engine.🤩