@@dz9459 Yes but I was thinking more like using this with some sort of compartment to carry people you know? Like instead of horses, we could use this. I know it sounds silly :(
Knowing me, I’d forget a part near the beginning. Have to disassemble. Put the missing part in. Reassemble only to find I’ve lost something and now I just have a $1k paperweight.
@@TheWinjin For sure. I'm just bad at getting ahead of myself and moving too quickly thinking I've done everything right without consulting the instructions...and bobs your uncle, I've a missing part that was supposed to go on early...lol
Toyan has been doing this awhile and gets big $ for this stuff. Blows my mind but they r all build on nitro fuel r/c style theory. Id like to see(& have few times) and actual 1 off custom mini engine built to run on gasoline or diesel. That would be cool. Maybe i duno 5times size of this. Like soze of a briggs 1cyl 5hp engine but a v8/v10
They are nicely made but this particular engine has a major design flaw; only two crankshaft bearings. They are infamous for snapping crankshafts, some owners have gone through multiple cranks.
this is just so sick to me. kinda gives me the same feeling as when i find a cool hotwheel. seeing all the tiny pistons and the tiny camshaft is just so cool to me. awesome vid thanks
Wow this is incredible! I have seen metal engine model kits but they are only for display, this one actually works like the real thing. I am amazed! Thank you for building it up!
JohnnyQ90 has several videos of working mini engines by Toyan. He plays around with them, and tries to hop them up by making homemade parts. He has some interesting videos in case your interested.
I wish Toyan had more gasoline options. It seems almost every one of their kits runs on nitro, and I want one that runs on gas cause nitro is very expensive
@@jodierpbinson6246 You must be getting really crappy stuff then. My sidewinder and cool power stays good over the winter and well into the next summer. It’s still alright around 1 year later.
Theoretically speaking I suppose it's possible most vehicles have a part called an alternator which supplies the battery with power and is usually hooked up to the serpentine belt in the front
This particular model is only for ornamental function, it's crank will break if used under load , and they are seemingly not interested in fixing the defect .
As a diesel glow plug type engine the power generated by the engine is usually less than impressive. Cool factor aside. Add one manual transmission with manual clutch to compensate for lack of power and added realism now we triple the cool factor.
This is a great video! Really helped me visualize what’s going on in the engine. Would you consider putting a quick note of the part names in the video as you put them on the engine for future builds? I know it’s quite a bit more work but it would be greatly appreciated for us non-mechanically Inclined individuals 👌🏾🙏🏾. Love the video!!!!
Hahaha. I literally just made basically the same comment and decided to read some others afterwards and ours is almost word for word. Even told my roommate that I’m sure I’m not the only one that thinks this lol.
@@DIY-Garage That's great ! I didn't think to turn them on unfortunately, maybe a little note at the start of the video telling people that it's available would be nice ! Great, great work nonetheless, really enjoyable and instructive :)
It's probably a silly idea But would be awesome to see you to hook one of them up with a little alternator or what ever would be needed to use as a small generator?🙂 Be Interesting to see how much charge you could get of one!
I'm amazed how accurate this is to a real engine. I've seen some miniature engines that have to make big design changes due to them being such a small size.
2 concerns: The piston lube will wear out very shortly and I see no easy way to open it up and reapply. Same for the crank shaft bearing, that blob of lube cannot survive it long term and will eventually dry out
Your concerns are correct, but this engine was made as a fun project or display piece. It was never meant to drive anything like an RC car or boat so you won't actually run it a lot. The drive shaft has no output to a clutch or gearbox. You could perhaps modify it to run something but it wouldn't be a good idea since the parts are not continuously lubricated as it runs.
oh it seems i'm wrong. RC engines just doesn't seem to have oil lubrication like full sized engines. I guess you'll just have to take them apart once in a while to lube the parts
@@fab9207 even with oil in the fuel its still a 4 stroke that's only going to lube the upper engine, if it were a 2 stroke with fuel going through the crankcase it'd be different
I have an idea that I think would make this already awesome video just a little bit better…..label the pieces on the screen as you are putting them in/on. Not sure how much extra time that would take but I’d like to see the names of some of these pieces……at least some of the bigger/more main pieces. Love these videos though. Keep it up!
This super cool and something I know I would have a lot of fun building but $1000+ for a 14cc engine seems like an irresponsible purchase for me personally. I can see the manufacturers attention to detail, the beautiful packaging and quality which easily justifies that price. I just can’t see spending that much money on something like this. You can buy a cheap Chinese Honda Grom knockoff on Amazon for that price. The engine won’t be as good of quality but it does have enough power to pull a human. Great video!
I would wash every single component of that before starting. You always have aluminum dust on everything. Threaded holes, recessed areas with tight corners, ect. The grey grit at the bottom of the flushing cup, after flushing,, will open your eyes. You create/grate a bit more if o-rings are installed dry and it's a tight fit. Be very generous with the assembly lube,,no matter the instructions,, that just show drops of oil. CRC QD electrical cleaner and compressed air until dry and clean. The CRC wont attack rubber components,, but will soften certain open cell foams. Use a magnifying glass to be sure your clean. Very cool little 4 popper. Thanks!.
@@elwingy However it could work for if you want to have an RC vehicle that has more power and can gain more momentum but doesn’t have to be the fastest like an RC monster truck or maybe something like an RC truck of some sort for example! :)
Check out JohnnyQ90 here on RUclips, guy has build a couple of these on RC cars already. Also builds his own engines from scratch, amazing talented guy.
All the components seem to be very well engineered. A joy to watch this engine taking shape. Have you built one of these before? I would find the large number of parts quite a challenge to know where they all go.
@@DIY-Garage Ah! So have I! 60 years ago I had just started, aged 15½, as an apprentice motor mechanic, working mainly on Austin and Morris cars with the A-type or B-type engine, both of which I later got to know inside out. Engines weren't nearly as reliable back then.
@@SuperLittleTyke engines back then ain't as reliable? U sure u didn't mean the other way around. And that's crazy how much experience you have. Respect.
@@p19shelt No, engines in older cars needed much more maintenance than today. Perhaps it's due to better lubricants today, but also so much specialist equipment has been introduced over the years that enables more precise engineering tolerances and machining techniques. It's a shame that we reach manufacturing perfection and then the electric car arrives! With a 200 mile range, gosh! I see them parked at the Tesco charging station with the driver sitting in the vehicle for half an hour in order to get home. And this is progress?
It's the nitro fuel Proper nitro powered RC engines get a good 1000hp/l and top fuel dragsters running on 90% nitro can get 8-11k hp out of the 8.2l engines
@@testaccount4191 well... to be fair it's just the service interval, like the 40k miles rebuild interval of 13B's, which is actually not that bad compared to competition engines they can come close to without losing too much reliability 🤭
Excellent video, I love watching this at 2x speed, makes you look like Forest Gump assembling a rifle Also, I wonder how they come up with the cam profile on such a small engine.
Ладно собрать. Тоже красиво, но в целом по инструкции почти любой справится. Но ведь этого малыша кто-то спроектировал и кто-то изготовил. Причём достаточно высокоточно. А вот там уже искусство
If I was to build this I would want to attach it to a gas powered RC truck to give it a more realistic look and use this mini engine instead of the stock RC engine
Интересно, сколько стоит набор?. Как распределяется искра? Как подаётся топливо и вода, за счёт чего происходит доставка топлива и циркуляция воды в системе охлажения?. Как, чёрт возьми- смазываются коренные и шатунные шейки валов?!. Нифига не понятно, но очень интересно...
Интересно, сколько стоит набор?. Как распределяется искра? Как подаётся топливо и вода, за счёт чего происходит доставка топлива и циркуляция воды в системе охлажения?. Как, чёрт возьми- смазываются коренные и шатунные шейки валов?!. Нифига не понятно, но очень интересно...
@@DIY-Garage Have you figured out which R/C model you're gonna use to run this bad boy? I'm interested. Give us a heads up. Tired of 2-stroke R/Cs', they're hard to keep in tune :(
Yeah, the lack of bearing and therefor low friction is why the engine revs up pretty quick but sadly it means the engine is almost useless as it breaks super easily. They have acknowledged several times on their Facebook group that this engine is a massive failure. Their new V8 has proper support for the crank but it really struggles to rev up, and sounds super sluggish.
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
I wish someone would invent a huge version pf one of these. Could you imagine the potential?!
Ikr. It would be revolutionary
We could power whole bicycles with that
@@dz9459 Yes but I was thinking more like using this with some sort of compartment to carry people you know? Like instead of horses, we could use this. I know it sounds silly :(
@@Flash_345 idk but that sounds very advanced. In the future maybe.
Um aktually 🤓☝
Knowing me, I’d forget a part near the beginning. Have to disassemble. Put the missing part in. Reassemble only to find I’ve lost something and now I just have a $1k paperweight.
As far as I've seen it's 2k, but still, yeah, relatable. However it seems to have some incredibly useful instructions.
@@TheWinjin For sure. I'm just bad at getting ahead of myself and moving too quickly thinking I've done everything right without consulting the instructions...and bobs your uncle, I've a missing part that was supposed to go on early...lol
I bought the model 4 cylinder and found at towards the end the top half of the block was on backwards
@@UndeadSo1dier01 Oh no!!! That's something I would definitely do! Was it difficult to fix?
Yeah, ADHD sucks
I marvel at the machine tooling that went into producing all the small engine components.
Great video! Love the sound effects.
Toyan has been doing this awhile and gets big $ for this stuff. Blows my mind but they r all build on nitro fuel r/c style theory. Id like to see(& have few times) and actual 1 off custom mini engine built to run on gasoline or diesel. That would be cool. Maybe i duno 5times size of this. Like soze of a briggs 1cyl 5hp engine but a v8/v10
Same. Most impressive for me was the clearance of the pistons with the block. So tiny!
That’s got at least 300+ Mousepower 😂
And 300+ HP if it was real XD
This is a engine 0.5 - 1 HP
I think I found my gateway to understanding combustion engines. I'm getting one! Ty for the video
The machining quality on these is amazing
better be for $2000
They are nicely made but this particular engine has a major design flaw; only two crankshaft bearings. They are infamous for snapping crankshafts, some owners have gone through multiple cranks.
Likely because they knew who it was being sent to. Otherwise be prepared to have to file / sand / and be shorted a piston like myself.
@@ferrumignis The very first thing I noticed when he put the crank in, that thing is not gonna have any support at all.
This is obsession on a whole new level
this is just so sick to me. kinda gives me the same feeling as when i find a cool hotwheel. seeing all the tiny pistons and the tiny camshaft is just so cool to me. awesome vid thanks
Wow this is incredible! I have seen metal engine model kits but they are only for display, this one actually works like the real thing. I am amazed! Thank you for building it up!
@Check my about section link Scammer alert
Bruh how tf does this hearted top comment have a scam for 10 days and it's still up
Only part I dont like is that it only has 1 piston ring and no oil ring
JohnnyQ90 has several videos of working mini engines by Toyan. He plays around with them, and tries to hop them up by making homemade parts. He has some interesting videos in case your interested.
@@HinkHall گججوجکچپ۸۸ء۸
"Honey, the neighbour is back again testing those little engines!"
"Oh c'mon, let him enjoy his life."
lol, how did you know?!
I personally think that the pistons are the cutest thing in the whole package.
nice! I have this exact same engine in my miata. same size and hp and everything. didn't know it was this easy to put them together yourself lol
😂
for the price of the kit you probably could get another miata
@@lightspeed4173 how much is this engine ?
BP gang
@@Nanoscape30 1k
I thought it was kind of lame having to be powered by an electric motor before realizing it is the starter and this thing is freaking awesome!
Hmm
@@tonypasma1707 why hmm
Same, I was like "mmmh a motor powered by a motor..."
search JohnnyQ90
all thos working cheaper ones are always out of stock, wish i could have this one but out of stock or either too expensive
These are so well machined. Looks nicer than some real engines.
I wish Toyan had more gasoline options. It seems almost every one of their kits runs on nitro, and I want one that runs on gas cause nitro is very expensive
Exactly
And it goes stale fast ! Year it would be grate to use 98 !
@@jodierpbinson6246 You must be getting really crappy stuff then. My sidewinder and cool power stays good over the winter and well into the next summer. It’s still alright around 1 year later.
Diesel would be my fuel of choice
@@Interdiction yes one slowest burning fuel makes sense for this... not
The workmanship of the set looks fantastic.
*Self Unboxing Engine:* ruclips.net/video/F-wB65wsI78/видео.html
*Self Assembling Engine:* ruclips.net/video/KaRgqpZyr60/видео.html
The editing, cinematography... Absolutely beautiful. Great job Sir.
Thank you very much!
عبقرية لا مثيل لها ، بارك الله
في العلم وأهله ،،
شكرآ جزيلا لقناة اليوتيوب ،
( سلا / المغرب from morocco )
クランクシャフトにコンロッド取り付ける作業懐かしい😌前職思い出す。
Love it. I’m a model engine user. It sounds much like a 2 stroke single RC car engine more than say a Saito multi cylinder. Fun
imagine puttin a little 5 v generator on it and using it as a portable charger lmfao
imagine using it for car meets, coolest phone charger at the car meet
800$plus gas
Bro I can’t imagine the exhaust tho
Theoretically speaking I suppose it's possible most vehicles have a part called an alternator which supplies the battery with power and is usually hooked up to the serpentine belt in the front
@@Kaminari_Kitsunokami lol. theoretically i could turn it into a moon rocket that tap dances
Imagine putting this in a rc car
Exactly what I was thinking
This is exactly what these engines are built for
Nice pfp
This particular model is only for ornamental function, it's crank will break if used under load , and they are seemingly not interested in fixing the defect .
great engine conversion for bicycles too!!
Wow! Great work! This roar shocks me! Only 2JZ has 6 cylinders, and here there are 4 of them, so this is a small F20C
Apart from this massive engine your videography and editing is Highest level
رائع جداً صنع هذه الأجزاء الصغيرة بجودة عالية
أنا معجب بهذا المحرك الصغير
تحياتي لك🇴🇲
I would love to see this as the power plant for an rc car or boat.
маховик просто крутится внутри, из него нельзя сделать ничего, это как стенд
As a diesel glow plug type engine the power generated by the engine is usually less than impressive. Cool factor aside. Add one manual transmission with manual clutch to compensate for lack of power and added realism now we triple the cool factor.
They are to weak, way better off electric or a nitro motor actually made for rc. This is a tabletop model only.
번역 기능을 이용해서 외국인과 말이 통하니 너무 좋네요
@@B_siri ikr? i love that feature, finally something good coming out of youtube
I know you don’t post a ton of content but when you do it is pure perfection.
Thank you. Yes, its quality over quantity.
Это же сколько терпения и усердия надо что бы собрать это чудо. Удачи и здоровья.
Сколько? Что тут такого?
@@Zlavim_ да просто человек не знает ничего о двигателях.
@@npc_citizen9276 человек что-то хорошее хотел а сказать а вы как обычно... наших за пол километра видно...
SUCH TINY ENGINE REALLY EXIST THIS IS UNBELIEVABLE.
I am surprised that an engine of this size makes such a sound!
Incredible project, amazing result! Must be a pleasure putting it together… 😃
This is a great video! Really helped me visualize what’s going on in the engine. Would you consider putting a quick note of the part names in the video as you put them on the engine for future builds? I know it’s quite a bit more work but it would be greatly appreciated for us non-mechanically Inclined individuals 👌🏾🙏🏾. Love the video!!!!
I usually do that with captions.
Hahaha. I literally just made basically the same comment and decided to read some others afterwards and ours is almost word for word. Even told my roommate that I’m sure I’m not the only one that thinks this lol.
@@DIY-Garage 4haj
@@DIY-Garage That's great ! I didn't think to turn them on unfortunately, maybe a little note at the start of the video telling people that it's available would be nice ! Great, great work nonetheless, really enjoyable and instructive :)
There is a transcript of the video text in clickable three dots under the video on the right (Show video text)
Magnificent work! What a sweet little engine!😁🔧🛠️👍
your attention to detail does not go unnoticed, thank you!
Art in automobiles 🚘 ✨️
Can watch this for a whole day without getting bored
bro just looking at that part assembly page made me realise how much engineering and detail the creator of the engine had to go through
thats so cool it would be even cooler if there was a tiny little model transmition to go along to it just because transmissions are cool too
Agreed.
THIS GUY IS DOING A GREAT JOB BY EDUCATING PEOPLE...SALUTE🥰🥰👍
7:22 this was awesome!! Loved it!!
best video i have seen in a year
It's probably a silly idea But would be awesome to see you to hook one of them up with a little alternator or what ever would be needed to use as a small generator?🙂 Be Interesting to see how much charge you could get of one!
it will be very good since i don't see the purpose of even making them if you aren't using their power
@@АнТон-ч2ъ7д i think they r made for RC Cars
@@АнТон-ч2ъ7д using this motor for electric power is very useful, amazing idea
Small engines are less efficient, but I also doubt this engine is built to run for long periods.
@@sdfglkjhdfkjdhldskfj
Exactly, there’s not any real lubrication/oil circulation system.
I'm amazed how accurate this is to a real engine. I've seen some miniature engines that have to make big design changes due to them being such a small size.
It is a real engine though.
yeah now we just need oil pumps, and it would actually be a functional engine.
So your telling me I can become a mechanic at home with these little model engines
Anyone smiling after he started the engine and revved it up? Only me? Ok cool. Love your video 🤌🏻
YES GREAT INVENTION.
2 concerns:
The piston lube will wear out very shortly and I see no easy way to open it up and reapply.
Same for the crank shaft bearing, that blob of lube cannot survive it long term and will eventually dry out
splash lubrication?
Your concerns are correct, but this engine was made as a fun project or display piece. It was never meant to drive anything like an RC car or boat so you won't actually run it a lot. The drive shaft has no output to a clutch or gearbox. You could perhaps modify it to run something but it wouldn't be a good idea since the parts are not continuously lubricated as it runs.
oh it seems i'm wrong. RC engines just doesn't seem to have oil lubrication like full sized engines. I guess you'll just have to take them apart once in a while to lube the parts
@@hashtag-shaneiacs I think the fuel is mixed with some oil which is why they often have big white smokey exhaust plumes
@@fab9207 even with oil in the fuel its still a 4 stroke that's only going to lube the upper engine, if it were a 2 stroke with fuel going through the crankcase it'd be different
This is a full size engine, it's just a giant is assembling it 😁
I still can't believe the engine just worked perfectly 😂
So satisfying to watch
아주좋은 영상!!!
엔진의 구조를 잘 알수있었고,
정교함에 감탄박구갑니다^^
🤝🇪🇺
I have an idea that I think would make this already awesome video just a little bit better…..label the pieces on the screen as you are putting them in/on. Not sure how much extra time that would take but I’d like to see the names of some of these pieces……at least some of the bigger/more main pieces. Love these videos though. Keep it up!
This super cool and something I know I would have a lot of fun building but $1000+ for a 14cc engine seems like an irresponsible purchase for me personally. I can see the manufacturers attention to detail, the beautiful packaging and quality which easily justifies that price. I just can’t see spending that much money on something like this. You can buy a cheap Chinese Honda Grom knockoff on Amazon for that price. The engine won’t be as good of quality but it does have enough power to pull a human.
Great video!
This is made in China too...
Don't buy one then. You don't have to justify your decision to anyone here.
Wow what a great video! ❤❤
What a model.. but i admit that this video is amazing!
You have no idea how much I enjoyed watching this. Great video.
I would wash every single component of that before starting. You always have aluminum dust on everything. Threaded holes, recessed areas with tight corners, ect. The grey grit at the bottom of the flushing cup, after flushing,, will open your eyes. You create/grate a bit more if o-rings are installed dry and it's a tight fit. Be very generous with the assembly lube,,no matter the instructions,, that just show drops of oil. CRC QD electrical cleaner and compressed air until dry and clean. The CRC wont attack rubber components,, but will soften certain open cell foams. Use a magnifying glass to be sure your clean. Very cool little 4 popper. Thanks!.
Este pequeño motor debe valer tanto como uno grande, el trabajo que habrá costado diseñarlo y fabricarlo! 😳👍
Was es nicht alles gibt. Toll!
asmr at its finest
Came from tiktok and I don't regret it. 💯🤙
Genius! What a great way to teach a young mind to understand the combustion engine .
WOW!
nice work I like it
Thanks!
bro the lego build channels gonna go crazy with this
Bro... I watched the whole thing without even knowing this is functional. Also I love how the choke is just your hand
Looks so relaxing building that
The next step could be to build an RC car around that engine! :)
too heavy of an engine for an rc car
@@elwingy
However it could work for if you want to have an RC vehicle that has more power and can gain more momentum but doesn’t have to be the fastest like an RC monster truck or maybe something like an RC truck of some sort for example! :)
Check out JohnnyQ90 here on RUclips, guy has build a couple of these on RC cars already. Also builds his own engines from scratch, amazing talented guy.
Eu fico maravilhado com tantas peças perfeitas e que funcionamento da máquina
Primeiro funcionamento o motor já tá fumando 😅
Mas eu tbm gosto desses vídeos
0:15 bro made a diabolical transition and thought we wouldnt notice
Amazed when it fired up. Excellent video production too.
Love the editing and what a fascinating model engine!
All the components seem to be very well engineered. A joy to watch this engine taking shape. Have you built one of these before? I would find the large number of parts quite a challenge to know where they all go.
I've built real engines before. :-)
@@DIY-Garage Ah! So have I! 60 years ago I had just started, aged 15½, as an apprentice motor mechanic, working mainly on Austin and Morris cars with the A-type or B-type engine, both of which I later got to know inside out. Engines weren't nearly as reliable back then.
@@SuperLittleTyke engines back then ain't as reliable? U sure u didn't mean the other way around. And that's crazy how much experience you have. Respect.
@@p19shelt No, engines in older cars needed much more maintenance than today. Perhaps it's due to better lubricants today, but also so much specialist equipment has been introduced over the years that enables more precise engineering tolerances and machining techniques. It's a shame that we reach manufacturing perfection and then the electric car arrives! With a 200 mile range, gosh! I see them parked at the Tesco charging station with the driver sitting in the vehicle for half an hour in order to get home. And this is progress?
214hp per liter, that’s amazing.
It's the nitro fuel
Proper nitro powered RC engines get a good 1000hp/l and top fuel dragsters running on 90% nitro can get 8-11k hp out of the 8.2l engines
@@AlphaDomeLP dragsters run on 90%?! God damn, i run on 10% and 16% and its already very fast
@@furkanfpv677 the engines do only last about a mile though
@@testaccount4191 oh, thx for the answer
@@testaccount4191 well... to be fair it's just the service interval, like the 40k miles rebuild interval of 13B's, which is actually not that bad compared to competition engines they can come close to without losing too much reliability 🤭
Wow...just wow!
Einfach unglaublich. Der Wahnsinn!
엄청나네요
영상 잘봤습니다
Awesome… very beautiful 👌
Fully watched 👍
S-A-T-I-S-F-A-T-Ó-R-I-O QUALIDADE. PARABÉNS 👏🏽👏🏽👏🏽 SUCESSO
Es scheint doch Perfektion zu geben! 👍
this is so satisfying to watch
Это такой роскошный и маленький очень красиво и мило выглядит 😊
Would be interesting to know if it actually made any measurable horsepower.
10:21 there’s a bolt on the top left unscrewing itself 😳
nice catch
Excellent video, I love watching this at 2x speed, makes you look like Forest Gump assembling a rifle
Also, I wonder how they come up with the cam profile on such a small engine.
I am gonna put this in my rc car, no one will stop doing it
autonomous sensory meridian response of tiny mechanics is a treat.
Ладно собрать. Тоже красиво, но в целом по инструкции почти любой справится.
Но ведь этого малыша кто-то спроектировал и кто-то изготовил.
Причём достаточно высокоточно. А вот там уже искусство
it's like a 1400cc engine making 300hp that's impressive
Yep, mind you it's turning damn quick to get those kind of figures. Torque wouldn't the greatest, I imagine.
This man always tries to do something newand extra ordinary and make his audience feel excited for every next video, Love you
Love you to
I wish i could afford to buy one of these. I’d have so much fun doing this with my son
sounds like a cat trying to roar like a tiger. incredible piece of machinery by the way.
Super sprawa. Za chwile będą to jedyne silniki spalinowe które będzie można uruchamiać :)
genau
И смотреть на них будем с таким же восторгом и недоумением, как смотрим сегодня на паровые машины.
If I was to build this I would want to attach it to a gas powered RC truck to give it a more realistic look and use this mini engine instead of the stock RC engine
just waiting for someone to buy one and put it into an rc car
They can't handle any load. Many people found out the hard way , toyan fob you off and worse , blame the customers for the crank failure.
@@stevenwalker1883 that statement just killed any thoughts I had about getting one of these
I was thinking about putting it in my rc truck
@@deathryder711 I share your sentiments , the nr200 four stroke is very solid though .
@@stevenwalker1883 cool thanks
I'll look into it
I LIKE THE ENGEN IT WAS LETING OUT SMOK
麻雀虽小五脏俱全！这太可爱了吧？男人至死是玩童！这四缸汽油器太酷了！就是组装起来太复杂了！
)) замечательный движок 👍🏻👍🏻
Интересно, сколько стоит набор?. Как распределяется искра? Как подаётся топливо и вода, за счёт чего происходит доставка топлива и циркуляция воды в системе охлажения?. Как, чёрт возьми- смазываются коренные и шатунные шейки валов?!.
Нифига не понятно, но очень интересно...
Интересно, сколько стоит набор?. Как распределяется искра? Как подаётся топливо и вода, за счёт чего происходит доставка топлива и циркуляция воды в системе охлажения?. Как, чёрт возьми- смазываются коренные и шатунные шейки валов?!.
Нифига не понятно, но очень интересно...
Muito legal 😃👏
Thanks for the excellent video! I’m inspired again. Now would this set up go in a model boat or remote controlled truck?
Glad you liked the video. This one is designed to go into RC cars & trucks.
@@DIY-Garage Have you figured out which R/C model you're gonna use to run this bad boy? I'm interested. Give us a heads up. Tired of 2-stroke R/Cs', they're hard to keep in tune :(
Awesome toy for adults!
Omg the mini pistons!!! 😍 I can’t handle it 😂
I’m kinda shocked it only has two main bearings, but it also makes sense being 14cc
Indeed , that crank snaps under any load , they just keep changing their story on why , ultimately you have bought a paper weight.
Yeah, the lack of bearing and therefor low friction is why the engine revs up pretty quick but sadly it means the engine is almost useless as it breaks super easily. They have acknowledged several times on their Facebook group that this engine is a massive failure.
Their new V8 has proper support for the crank but it really struggles to rev up, and sounds super sluggish.
@@NorwayVFX Every video I have seen of the V8 makes it sound very badly strangled, it just doesn't want to rev.