still am lost why this channel does not yet have a 100k subs. your video's are entertaning, of good quality, and this is a super cool project. keep on making vid's man i know you'll make it on RUclips!! And keep up the good work, i'm rooting for you that this works out well, Love from the Netherlands!! byebye !
Why don't you try two smaller radiators mounted more like a dirt bike would that give you more room with fans? Also more space from the exhaust pipes with a small gap between them and better air flow. Just a thought. Nice job on the exhaust
@@Niko-bf7nw Ture but the whole bike looks killer all the lines and everything just matches up so good and goes all together but those fuel tanks stick out like a sore dick, maybe a custom sheet metal tank that has the same lines as the rest of the bike would look way better?
Madness, but I love it! Well done on the progress so far mate, your attention to detail is what sets this apart from the rest. And gidday from New Zealand.
This is a mad build guys, I'm loving it! Do you have any plans to box the stem into the frame with sheet metal like you mentioned before, or have you abandoned that idea? Such a huge stress point, it seems like a no brainier
I think this will be the fastest grom on youtube for sure!! I Love this bike build!!🏁🏁👍👍....You guys nailed it" with an awesome build....Shout out from Maryland...
Great build so far guys. I believe you did mention gussets for the neck, if you have done away with that idea you should at least add a tube to triangulate the top of the neck to the lower tubes.
Would say keep the headers as far away from the engine as close to stock bc it will retain that heat on the engine and block. Not to mention overheating the bike if your trying to cram that rad in there. My idea is to run the roads on the side of the bike like the superhawk. Its not ideal but it is practical. It will save room plus not overheat. If u think about it. Cold air is coming through blowing the hot air back on the pipes and the headers are going to blow that extra hot air back on the engine and not going to get rid of it. Theoretically. I'm no scientist. But I know when I had my mustang. I ran into a lot of issues putting shorties on with my starter. Had to buy a thermal sock bc it was ruining starters like crazy. All the extra heat.
Are you guys going to try to make the small bore event at Barber Motorsports with MNNTHBX JUNE 5th - 7th? It would be awesome to actually see this build.
So I got a question and it's not to be down or anything like that about the project cuz I think it's cool but how can you call it a Grom when there's only one or two parts on the whole thing that are from a Grom
It sounds extremely choked you really need to run 2 seperate exhuasts. Maybe a link pipe in between them. But its clearly choked up too much back pressure
Can't wait to see this finished, it's getting there. Great stuff as always, we love the progress!
Definitely one of my favorite grom builds
still am lost why this channel does not yet have a 100k subs. your video's are entertaning, of good quality, and this is a super cool project. keep on making vid's man i know you'll make it on RUclips!! And keep up the good work, i'm rooting for you that this works out well, Love from the Netherlands!! byebye !
Maybe consider a twin radiator setup (similar to an EBR 1190) as you could draw heat out the rear
Erik Buell Racing
👌
I could listen to this grom all day. Damn thats nice
sounds great , you are a better welder than me , pipes look great
Why don't you try two smaller radiators mounted more like a dirt bike would that give you more room with fans? Also more space from the exhaust pipes with a small gap between them and better air flow. Just a thought. Nice job on the exhaust
dude paint the body frame red, black, white, or green so the frame doesn't look boring
it’s still in the process bro let him finish making it first lol
needs to do something with those ugly ass gas tanks under the seat, I mean they look good they just don't fit the style of the bike
@@jordonadkins4253 he's doing the unthinkable, lets be honest, looks really don't matter thats the last stop of any project like this.
@@Niko-bf7nw Ture but the whole bike looks killer all the lines and everything just matches up so good and goes all together but those fuel tanks stick out like a sore dick, maybe a custom sheet metal tank that has the same lines as the rest of the bike would look way better?
And now this grom, is the best sounding grom.
Madness, but I love it! Well done on the progress so far mate, your attention to detail is what sets this apart from the rest. And gidday from New Zealand.
Literally was thinking about this build today
This is a mad build guys, I'm loving it! Do you have any plans to box the stem into the frame with sheet metal like you mentioned before, or have you abandoned that idea? Such a huge stress point, it seems like a no brainier
Looks great and sounds great, quiet for my taste, but still sounds really good.
We turned the audio down for the start up clip. We didn't want to blow out any ear drums!
@@BuiltByBailey well in that case, hells yeah!
I think this will be the fastest grom on youtube for sure!! I Love this bike build!!🏁🏁👍👍....You guys nailed it" with an awesome build....Shout out from Maryland...
Is it even a question if it's the fastest?
beast
Tight
That baby sounds awesome👍
sounds so goooooooooood!!
a beast on the making, dang
Great build so far guys. I believe you did mention gussets for the neck, if you have done away with that idea you should at least add a tube to triangulate the top of the neck to the lower tubes.
Bon travail,super projet bravo
nice nice
Perfect handmade 👍🙏
Good job 🤙🤘
Next test ride grom wheelie monster
How much would I need to spend on these mods on my bike
Zorst is looking the goods. 🤙🏻🤙🏻
Sounds good and is looking great. Keep up the great work!. I"m glad you guys remove the end tails of the gas tanks, it looks much better. Thanks ;o)
dont worry with the exhaust.. my fireblade ones ar almost touching the radiator in the bottom,.
How many more videos before you are done and are you going to keep it or are you going to sell it
That thing is gunna fry tyres
Would say keep the headers as far away from the engine as close to stock bc it will retain that heat on the engine and block. Not to mention overheating the bike if your trying to cram that rad in there. My idea is to run the roads on the side of the bike like the superhawk. Its not ideal but it is practical. It will save room plus not overheat. If u think about it. Cold air is coming through blowing the hot air back on the pipes and the headers are going to blow that extra hot air back on the engine and not going to get rid of it. Theoretically. I'm no scientist. But I know when I had my mustang. I ran into a lot of issues putting shorties on with my starter. Had to buy a thermal sock bc it was ruining starters like crazy. All the extra heat.
You guys need to work on your enthusiastic response faces! ;)
Sounds great, looking forward to more.
I am interested in buying let me know how much? I love this built.
Are you guys going to try to make the small bore event at Barber Motorsports with MNNTHBX JUNE 5th - 7th? It would be awesome to actually see this build.
You think a head tube gusset is needed with the way that looks might git a little shimmy n shake.
Top gostei parabéns
Brazil❤🙏
Sweet
How bout putting that engine in an R3 for the next build?
Why didn't you just pulse the seems, you purged it, might aswell pulse weld it. Or was the fit up off?
Why r u so short on rook w the radiator? U for get to rake the neck to clear all of that?
#datsoundtho #yummeh 👍👌
So I got a question and it's not to be down or anything like that about the project cuz I think it's cool but how can you call it a Grom when there's only one or two parts on the whole thing that are from a Grom
Hi
700 cc? The block at 9:06 says 889 cm3 witch means cc
It's actually a 689
@@Shadylurker85 ohh really I saw 889 my fault
Fz07 is a 689cc (just round it off to 700)
Aren't you going to drag that can when cornering?
Clearly not seeing as its the same place alot of low mounts go....
Timelaps how you install plsss 😊 just a suggetion
wonder what it would have looked like pie cut
nicely done though
damn I was getting curious what happen to the build
👍👍👍👍👍👍
Can I take you my bike for these mods?
🔥👍
Why did u weld the top 2 curve bars sooo different f re on left 2 right they are waaaay off
The motor mounts are not symmetrical on the fz-07 motor.
The more i look at it the more i think fitting the small wheels on the big bike would of done the same outcome lmao!!
It sounds extremely choked you really need to run 2 seperate exhuasts. Maybe a link pipe in between them. But its clearly choked up too much back pressure
Nice yamaha grom... oh wait what.
Dumbest build I've ever seen but I love it!
2nd header pipe could've angled more to the 1st header and a bit longer with one less bend,just sayin
Put a restrictive muffler on, you’ve already got enough power so now worries
Never. Enough. Power!!!
small tank oil but engine700cc
Hey guys, your blinding the dog, and all he did was not play ball.
MAKE MORE TIERS IN PATERON BESIDES 97$
That isn't a tier that is one patron. You should be able to enter a custom amount.
Beefy.
เมื่อไหร่จะได้เห็นเครื่องติดสักทีครับรอลุ้ยอยู่ครับ
Yamaha Rom lol
Nice clapped out FZ07 with smaller tires.
First
At this point you have just created your typical motorcycle with tiny wheels.
cool story. thanks for sharing.
How is this a Grom? Lol not a Honda engine not a Grom frame
Thought this was super cool until I saw a Yamaha piece of crap touching a Honda
Why don't u connect the tube that is welded to top of triple tree to the bottom of the triple tree? Def not legit engineering
keep milking it. final episode 100? 🤨
lol
1000?!?!