You should have taken all the seats out at once and completely detailed the inside of the truck then installed the seats, at least that's what I would have done because of my OCD LOL 🤣
Nice video. One small suggestion, work on sound levels. The volume difference between speech and music is high. I had to keep turning the music down and your voices up. No hate from me just a suggestion. I just bought an '06 and I'm going to do the same swap. Good luck fellas. Keep up the good work.
Yeah we went to a junk yard and the truck was worthless besides the interior and they were about to destroy it and we negotiated the heck out of it they wanted like 1800.
Considering the different body style and updated bucket seats, I don't imagine that it would work in a seamless manner, you might have to do some rewiring and drilling....
All you have to do is determine which two wires on the seat are uaed for power and ground. This can either be do e with the use of a multitester or easier is to google the wiring schematic for the model car you took the seats out of. You can look at that schematic and it will list what color wires were used for power and ground. Then locate a power wire in the vehicle you are putting the seats into. Normally there will be a plug under where the seat will be situated and this plug will have a wire in it that can provide the 12 volts you need. The ground wire from the seat can placed under any near screw or bolt that goes into the metal frame or metal body part. This set up will work on 95% of the cars out there as of this post date
This vids hella good keep it up make a part two I also wanna do this to my 22 f250
I’m looking to swap my seats too. I would like to know how you re wired the seats and consul? Thanks
Hey guys, did you make the heater/coolers in the seats work??? I would like to do that
You should have taken all the seats out at once and completely detailed the inside of the truck then installed the seats, at least that's what I would have done because of my OCD LOL 🤣
Nice video. One small suggestion, work on sound levels. The volume difference between speech and music is high. I had to keep turning the music down and your voices up. No hate from me just a suggestion. I just bought an '06 and I'm going to do the same swap. Good luck fellas. Keep up the good work.
Damn yall guys got a deal. Just spent that on just a full center console and trim pieces
Yeah we went to a junk yard and the truck was worthless besides the interior and they were about to destroy it and we negotiated the heck out of it they wanted like 1800.
can you make a video explain how you did the wiring. thanks
When doing this from an XLT, what all is needed in order to complete the swap? I'd love to do this
Where you guys able to wire the front seats??
Were did y’all get the interior
@Ghetto Garage I CANT make my seats work. Can you let me know how you did it?
Y’all never did the 2 video ??
any follow up vid to this one?
can i put seates from an 04 Dodge pickup in an 09 Ford F150 XLT pickup
What vehicle is the leather ones from
How’d you get the seats to work , how can I hyu so you can show me the diagram ?
Anyone know if 11th gen f150 seats fit ours?
Just found this 4 year old vid but Go Mean Green!
I have an 09 f150 doesnt have the one you istalled but like to put one in my truck like that
Center consol
Do you have the bench seats?
The same ones you took out is what i have !
Center floor console is ridiculously priced though i checked the 2012 models for xlt super cab
I would live a like but
you didn't clean the
Carpet.
Do you guys know if a 2013 f150 seats fit on a 2007 f 150????
Considering the different body style and updated bucket seats, I don't imagine that it would work in a seamless manner, you might have to do some rewiring and drilling....
Yes they should, a buddy of mine has an 03 F-250 and he swapped the interior from a 2016 into it without issues
I would like to buy the interior .i have the black seat belts you need
Message me on insta Dylan.wtx
@@ghettogarage6446 This is Doyle
Ok
Yo bro I can't seem to find u on insta. I'm looking for that diagram as well
Old seats still available?
Yess
@@ghettogarage6446 what's your Instagram
i'd like to buy the old seats.
All you have to do is determine which two wires on the seat are uaed for power and ground. This can either be do e with the use of a multitester or easier is to google the wiring schematic for the model car you took the seats out of. You can look at that schematic and it will list what color wires were used for power and ground.
Then locate a power wire in the vehicle you are putting the seats into. Normally there will be a plug under where the seat will be situated and this plug will have a wire in it that can provide the 12 volts you need. The ground wire from the seat can placed under any near screw or bolt that goes into the metal frame or metal body part.
This set up will work on 95% of the cars out there as of this post date
Did you ever get the seats to work? i'm stuck on the same issue.
i guess that's a no?
Update. I paid an auto electrician to do mine. They said it wasn’t easy.
Max Ringer what did they do to get it to work so I can hire one and tell them to do the same?
Cheyenne Obregon they had to do some rewiring. I couldn’t tell you what they did as i am not aware. They did charge me $500 though.
Cheyenne Obregon an auto electrician would know what to do.
I would leave a like but it’s a ford .