lol my favorite part is “cut around the old sink”. Provided the past installer did adhere it. 50 minutes with a flex scraper, hammer and cleaning/sharpening every 5 minutes.
Does anyone know the name of the runner under the sink that the clips slide into? Do they come separate as mine seem to have shaped off? Any help would be fab :D
Mine is from 2004 too. Thinking about upgrading to a deep sink. Faucet just got a pinhole leak last night and garbage disposal is leaking. Time for a overhaul.
Hi there! It's often required to use clips when installing a kitchen sink, as they offer extra support, particularly for materials like stainless steel. To ensure you're following the best approach, it's always a good idea to check the manufacturer's instructions for your specific sink. This will help you determine whether clips are necessary or if a silicone seal will provide adequate support on its own. We hope this helps. 💙
Need plumbers putty between the faucet plate and the sink. Previous owner missed that and now I'm dealing with years worth of water that's been leaking into the basement ceiling 🤦♂️
*Turns breaker off to garbage disposal -Literally 2 seconds later *Unplugs garbage disposal from outlet Why turn off the breaker if you're going to unplug it?
This certainly beats waiting for ANGI to get someone to show up and make an estimate. Why are we trusting yet another 'third party' to arrange handyman chores.
I realized it's easier if you're installing a new sink but getting to the bolts that screw up flush with the triangle shaped bracket there's no room for a screwdriver to fit at a 90° angle to the bolt head, how do get past that point?
Oh my gosh I wish you had never commented this, after you said that I cannot stop thinking about it and it graded on my nerves for the rest of the video
OK what the fuck are we supposed to connect the sprayer to? You can't just tell people that don't know what they're doing to just do something Jesus Christ.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Running an install by myself. Currently 1 beer in.
Ive started calculating it by swear words per hour.
Let that sink in
Instead of paying $940 just for installation, here i am Lowe's. Jesus take the wheel
😆 how did it go?
You and me both
Me too
you can do it! I took an ashwagandha and a shot of whiskey to calm my nerves. VERY rewarding at the end...can't stop looking at the new sink.
“And That’s It.” Is what sold me!
i love how the music makes it seem so easy and almost fun :-)
Yeah...and it's usually an all day affair.
That's how they get you.
Hahaha...for real lol
Does anyone here know the name of the background song?
Like it’s a Strawberry Shortcake or Mystery Egg unwrapping surprise video
Wow. Pretty straightforward.
Thanks Lowes, you've done it again
Don’t be fooled by the cute peppy music, this is a nightmare 🥲took me 2 hours to get our old sink out, 45 minutes to install the new one.
That's wasn't bad
I agree 1,000,000%
You sound spoiled
lol my favorite part is “cut around the old sink”. Provided the past installer did adhere it. 50 minutes with a flex scraper, hammer and cleaning/sharpening every 5 minutes.
Lol “and that’s it” i hate everyone
Does anyone know the name of the runner under the sink that the clips slide into? Do they come separate as mine seem to have shaped off? Any help would be fab :D
Track or rail. Supposed to be attached...maybe j-b weld or "real" spot weld or liquid cement type stuff? gl!
What kind of wrench is that at 1:37? The website version doesn't list it in the tools section.
Here it is! www.lowes.com/pd/BrassCraft-3-in-Adjustable-Wrench/999903667
@lowes, I need the clips, any link part number or reference?
Loving these videos!!!
Thanks Lowe’s corporate!!!
This makes me believe I can do it. As other commenter requested “Jesus take the wheel”!!!
Yeah you lost me at 00:25.
I have granite countertop and can't find the same shape sink. As the old sink. What can I do .. hello please 🙏 😭
Cut the granite with a tile saw?
Seems pretty easy for me to do. My sink definitely needs to be replaced since it hasn't been since I bought the house back in 2004.
Vggggg hhhhh Bună Byyg
Cffvvvbhb nbbbbbbb hgggvvvvafectataarestatneadecvatebbbhhhhhhhhhh hhbbbbbb
DevinaminunigvvvvbvvvTyhhyymunca bbhbbbbvinaturismnnhhnbustulmunciiggg
wwwwwwwwwwwwwttttttttffffffffffffffffaaaaaaaarrrrreeeeeeeyyyyyyyyyyooooouuussaaayyyiiiinnnngggg
Mine is from 2004 too. Thinking about upgrading to a deep sink. Faucet just got a pinhole leak last night and garbage disposal is leaking. Time for a overhaul.
What if I dont have room for clips? Can I use only silicone?
Hi there! It's often required to use clips when installing a kitchen sink, as they offer extra support, particularly for materials like stainless steel. To ensure you're following the best approach, it's always a good idea to check the manufacturer's instructions for your specific sink. This will help you determine whether clips are necessary or if a silicone seal will provide adequate support on its own. We hope this helps. 💙
Need plumbers putty between the faucet plate and the sink. Previous owner missed that and now I'm dealing with years worth of water that's been leaking into the basement ceiling 🤦♂️
Theoretically you aren't supposed to need it but... Yeah
Are u guys located in San Jose
How much $ to get removed and installed ?
*Turns breaker off to garbage disposal
-Literally 2 seconds later
*Unplugs garbage disposal from outlet
Why turn off the breaker if you're going to unplug it?
It's so the receptacle isn't live while you are working in the cabinet.
My sink tube dont fit level to my countertop.
what size is this sink? and should be?
Yeah this is the one time I'll pay for installation 😐
That garbage disposal has a knock out plug for the dish washer hose. That was not covered in the vid.
This is a basic video about installing a sink, not a disposal. There are several more steps required for a disposal that aren't included here.
This certainly beats waiting for ANGI to get someone to show up and make an estimate. Why are we trusting yet another 'third party' to arrange handyman chores.
This aint rocket science This isnt HVAC work its replacing a sink
It's not hard, but the video is way over simplified.
always
Stainless steel > Porcelain
As someone currently swapping out porcelain for stainless, you're right
Didn’t cover the under counter sink clips.
It looks so easy just like in Hollywood but once you get your hands Messi, it’s a mess
Easy -peasy 😅
Dont forget to clean the old caulk..🤣
I find the music extremely annoying!!!! Videos are great.
The music just speeds the installation along. 😆
Why wouldn’t you test for leaks? 😂😂
My sink is flush and connected to my counters. How to I disconnect it?
Kenna Parker That’s another video. Look up “installing an undermount sink.”
I realized it's easier if you're installing a new sink but getting to the bolts that screw up flush with the triangle shaped bracket there's no room for a screwdriver to fit at a 90° angle to the bolt head, how do get past that point?
just burn your house down
There’s a step missing.
Yup...this decides it, getting undermount.
Garage disposal
dont use silikon to attach sink instead use white cement it will be cent percent better❤
but a kitchen sink to you is not a kitchen sink to me, okay friend?
My family
My family has been doing this for all time
Couldn’t stand listening to that music anymore I had to stop watching
Oh my gosh I wish you had never commented this, after you said that I cannot stop thinking about it and it graded on my nerves for the rest of the video
Clear and concise. But P-traps are banned in most if not all building codes and you most likely have a S-trap.
Other way around. S traps are not considered code in the U.S atleast.
😆😆😆😆😆😆😆😆😆😆😆😆
most annoying background music. can not hear the dialog.
Train Station
How to remove an ugly sink and replace it with a similarly ugly sink.
What an upgrade! Complete transformed the kitchen.
OK what the fuck are we supposed to connect the sprayer to? You can't just tell people that don't know what they're doing to just do something Jesus Christ.