@@osbornebay944 yeah I had it apart and found a broken shaft that connected the engine to transmission so I replaced it with a used one and put it together and it's driving fine, codes cleared
Before I'm even watching the rest of this video I'm giving you a thumbs up and follow. Funny as hell bro said I'm a retard and I could do it. Lol sounds like me
I get knocking noise like you are talking about on this video but only at idle when I rev above idle it goes away could this be my problem as you are showing 2013 550
Thats exactly what it does. Take that tranny out and tighten that bolt and locktite it. Or u may have the dampner version depends on ur year but still same issue. Fix it now before it hurts it. Its easy. Please subscribe for me ok.
Thats exactly what it does. Take that tranny out and tighten that bolt and locktite it. Or u may have the dampner version depends on ur year but still same issue. Fix it now before it hurts it. Its easy. Please subscribe for me ok.
Hi Mike. I went into deep water.. then the bike started stalling and making noises. I let it dry and cleaned everything now it runs fine but it doesn't move at all 😢 nothin on H, L, R.. its a 2021 850 with low hours, belt and clutch look new still
@@IMPORTANTVIDEOS7 yes I can spin the tires and everything moves, turns.. but I have the bike on, in gear, give it gas and revs but nothing moves.. so maybe is that shaft or coupler?
When i shift my 2013 polaris 850 sportsman xp into low or high it won't engage. It works in reverse and now i can't put it into park. The bell crank aluminum connector is still working but warn a bit.
@IMPORTANTVIDEOS7 2016 850 HL making sound at idle in same spot as in your video! A guy is selling it because he doesn't know much about ATVs, oil was changed regular basis and it starts right up every time but hear that sound right in that area at the begging of your vid, sounds like a slight engine knock! Could this be same issue?
I wasn't able to find a used transmission (I'm in Canada) I ordered a new input shaft, mine is a spline only with the damper on the engine. Any tips that would help when I split the transmission case to replace the input shaft? Thanks!
No sorry. I have one right now but u cant tell in a video. The quick way to see if urs has a problem is to just go listen to someone elses. Look on marketplacebor go to a dealer who has one and start it up.
@IMPORTANTVIDEOS7 I feel like my noise gets louder when I am driving it. When it is sitting and I move the primary clutch back and forth I hear play where the transmission meets the engine.
Yes. Take the tranny off. Its eaither the bolt holdin on the coupler or the couplers broke inside. Depends on year but its the same eaither way you do same procedure. Its a easy job. Simple. Now please subscribe ok lol. Locktight the bolt and torque to 125f lb i think it is.
@@IMPORTANTVIDEOS7 Ok thanks. I'm interested in a used one that's for sale and the guy said the engine (or he thinks it's the engine) started making a noise but it's only at idle. I'm going try to go look at it in a couple of days.
i have a 2018 sportsman that knocks real bad at idle then when you speed up it kinda goes away. it runs and drives fine. i pulled the clutch and stuff like that and it didn’t go away. i had some metal on my drain plug for my tranny. could the coupler be my issue? i’m so lost and don’t wanna take it to get fixed. i have a video of it if that helps any i can send it to you. thanks 🙃
Subscribed. You are the man! My 2010 Polaris is tapping timed with power strokes, your vid is very helpful.
Thanks brother.
Your "SO EASY" attitude rocks! As too many quitters around.
Thanks brother.
Hi again Mike and everyone..
I'm doing this right now.. trying to remove the tranny to look at the coupler 😮
Are you able to separate the tranny?
@@osbornebay944 yeah I had it apart and found a broken shaft that connected the engine to transmission so I replaced it with a used one and put it together and it's driving fine, codes cleared
Don't have the problem yet but glad to have the information just incase I do inherit the issue I know its not a bad engine.
Yes. There durable long lasting engines. Its very simple fix.
отличное видео! многим помогло!
Glad to help brother.
Thanks man i think imma try this next week i am getting alot of noise at crank and idle
Mike subscribe for me ok. It will get the video out to more people. Thumbs up it. Glad this helped ya. If ya need any help just let me know.
Execent video gunna try this my self now
Everybody Please subscribe. I need subscribersnto get more vids out.
thank you man you are a great help
Welcome. Please subscribe for me ok. Glad to help.
Before I'm even watching the rest of this video I'm giving you a thumbs up and follow. Funny as hell bro said I'm a retard and I could do it. Lol sounds like me
Lol. I keep it to the point. Lol.
maybe Polaris should start fixing their crap before raising the prices next year.
Thank you so much, Man that was extremely helpful
I get knocking noise like you are talking about on this video but only at idle when I rev above idle it goes away could this be my problem as you are showing 2013 550
Thats exactly what it does. Take that tranny out and tighten that bolt and locktite it. Or u may have the dampner version depends on ur year but still same issue. Fix it now before it hurts it. Its easy. Please subscribe for me ok.
Thanks for subscribing.
Thats exactly what it does. Take that tranny out and tighten that bolt and locktite it. Or u may have the dampner version depends on ur year but still same issue. Fix it now before it hurts it. Its easy. Please subscribe for me ok.
Same exact thing my 2013 sportsman 850 is doing
Hi Mike.
I went into deep water.. then the bike started stalling and making noises. I let it dry and cleaned everything now it runs fine but it doesn't move at all 😢 nothin on H, L, R.. its a 2021 850 with low hours, belt and clutch look new still
The clutches turning? With cover off what are they doing?
@@IMPORTANTVIDEOS7 they look good and turn by hand. I have some videos. Should I uload them on my channel?
@RudyShop Lopez there spinning? But it wont move?
@@IMPORTANTVIDEOS7 yes I can spin the tires and everything moves, turns.. but I have the bike on, in gear, give it gas and revs but nothing moves.. so maybe is that shaft or coupler?
@RudyShop Lopez yes. Take out tranny. Its easy.
I pulled my transmission and I took the nut loose and the coupler on the transmission seems to be stuck I can't take it off like you did in the video
It has bolts or something holding it probaly
My 2019 makes bunch of noise is it the same thing 570
When i shift my 2013 polaris 850 sportsman xp into low or high it won't engage. It works in reverse and now i can't put it into park. The bell crank aluminum connector is still working but warn a bit.
Man u got problems, take it out and see. U can getba tranny on ebay sometimes for cheap.
I need help ? The Alan’s are trying to strip out
@IMPORTANTVIDEOS7 2016 850 HL making sound at idle in same spot as in your video! A guy is selling it because he doesn't know much about ATVs, oil was changed regular basis and it starts right up every time but hear that sound right in that area at the begging of your vid, sounds like a slight engine knock! Could this be same issue?
Yes, buy it cheap, than fix it.
@@IMPORTANTVIDEOS7 Going to get it tommorrow in NC !! Kids dad agreed to $1700 :) Ill report back! Thx brother!
I wasn't able to find a used transmission (I'm in Canada) I ordered a new input shaft, mine is a spline only with the damper on the engine. Any tips that would help when I split the transmission case to replace the input shaft? Thanks!
Not sure brother. Ebay has trannys. Keep lookin.
Do you have a video of the noise it makes? Im trying to figure out if this is my issue or if the noise im hearing is normal for a 550.
No sorry. I have one right now but u cant tell in a video. The quick way to see if urs has a problem is to just go listen to someone elses. Look on marketplacebor go to a dealer who has one and start it up.
@IMPORTANTVIDEOS7 I feel like my noise gets louder when I am driving it. When it is sitting and I move the primary clutch back and forth I hear play where the transmission meets the engine.
When I rev it it don’t wanna go any where the clutch looks okay belt is okay
Take it apart
My 2021 570 make a lot noise taking off and just riding. Is that the same noise
Yes. Take the tranny off. Its eaither the bolt holdin on the coupler or the couplers broke inside. Depends on year but its the same eaither way you do same procedure. Its a easy job. Simple. Now please subscribe ok lol. Locktight the bolt and torque to 125f lb i think it is.
Did yours go dead mine went dead and won’t start after the knocking
No, u need to drain your oil see if its got shiney metal. U might have blown engine
It’s turning over but not cranking
Hey Michael does this affect all models? Like a 2016 800?
Not sure on that.
@@IMPORTANTVIDEOS7
Ok thanks. I'm interested in a used one that's for sale and the guy said the engine (or he thinks it's the engine) started making a noise but it's only at idle. I'm going try to go look at it in a couple of days.
i have a 2018 sportsman that knocks real bad at idle then when you speed up it kinda goes away. it runs and drives fine. i pulled the clutch and stuff like that and it didn’t go away. i had some metal on my drain plug for my tranny. could the coupler be my issue? i’m so lost and don’t wanna take it to get fixed. i have a video of it if that helps any i can send it to you. thanks 🙃
Thats exactly what it does. Goes away when ya rev it. Gimme the vidwo. Where ya located?
@@IMPORTANTVIDEOS7 located in minnesota. not sure of to send you the video. Might have to email it to you
@@jacobgeiger6620 417-393-6670
@@IMPORTANTVIDEOS7 hey man can I send you a video too? Have a 2013 550XP making the hee da hooo lol
@@nonofyourbusiness7631 take the tranny out tighten that bolt or replace the plastic coupler.