This video inspired me to do the same thing to my 2011 Fusion! I upgraded the low beams, fog lights, turn signals, tail lights, and even reverse lights. Only things that will remain halogens are the interior lights
Did you have trouble putting the right hand turn signal on i did a full led bulb conversion and i had to take the whole bumper down.. i just now got my hands on led turn signals but i really don’t wanna take the bumper off again lol
I tried changing the bulb but the part where you connect the back end to car so it can Illuminate is different it’s like a box and not the same shape any advice ?
@@BrotherlyReviews Is there a tutorial on how to remove the side markers? I'm trying to also replace them with led but I'm struggling to remove the housing. Thanks!
I never looked up how to do it. But you can access the screws from inside the bumper. You’ll have to unclip and peel back the fender lining to access them. Pretty easy tbh. If you have any trouble message me on IG and I’ll walk you through it via video message.
I bought them locally at a shop. It’s the shop’s own brand. Syneticusa is a great brand. I have a few other led bulbs by them and still working perfectly years later.
This video inspired me to do the same thing to my 2011 Fusion! I upgraded the low beams, fog lights, turn signals, tail lights, and even reverse lights. Only things that will remain halogens are the interior lights
That maroon paint looks classy
Thanks for the great video on the bulb replacement 👍
You’re welcome
Did you have trouble putting the right hand turn signal on i did a full led bulb conversion and i had to take the whole bumper down.. i just now got my hands on led turn signals but i really don’t wanna take the bumper off again lol
Nope, was pretty easy without removing anything
Sweet! What bulbs did you use for the fog lights?
the brand is called Focus. its an in-house shop brand.
I have a 2010 hybrid and there's no space at all to get in between the headlights
You’ll have to remove the bumper then, unfortunately
nice lol have you had issues with the ac as well?
Just the connector for the blower motor under the dash. $25 fix.
SyneticUSA should sponsor you
I wish they would lol
Nicely done! Thanks for sharing.
Thank you!
Did you mount the resistor? If so where or what on ? Or did u let it hang?
The bulbs have built in resistors
Thanks bro that was very helpful man I appreciate it.
You’re welcome 🙏🏾
You have a video on how you fixed your 2011 metra dash kit and touch screen? Waiting for it
Nah I ended up taking it to get done, unfortunately. Couldn’t figure it out.
LOOOOOOOVE THE TBL plate !!
🙏🏾🖤💙🖤
I tried changing the bulb but the part where you connect the back end to car so it can
Illuminate is different it’s like a box and not the same shape any advice ?
You sure you bought the correct size?
Been having trouble on my 2011 sport high beams. Slyvania brand H7s won’t fit with the kit. Any brand or type you’d recommend?
I had to use a paper clip to hold mine in. As far as I know there are no aftermarket bulbs that just fit in there like the stock ones do
i have a ford fusion also what percent tint you have also I'm subscribed
thank you for the support!
35% on the windshield
15% front side windows
5% on the rear side windows and rear windshield
@@BrotherlyReviews you should do a night time driving video with the fusion so i can kinda see the difference with the headlights and tints
@@G8Juano I will make that happen! thanks the suggestion
@@G8Juano just posted a video based on your request! ruclips.net/video/OPvYyOERqyI/видео.html
I’m watching now brother
What brand or What bulbs do you have for your h11 bulbs?? Plz respond
The brand is Focus. It’s a local store brand only.
Do you have any good low beam bulb you could reccomend that is white and not amber?
I have a local store brand led bulb. Alla lighting and syneticusa make some very high quality led bulbs. Check on Amazon.
Looking good
Nice!!
They went out on me in 3 months and I had gloves on for installation
I'm replacing my side marker lights on my 2010 fusion sport. Which ones did you use?
www.ebay.com/itm/174410479723
@@BrotherlyReviews Is there a tutorial on how to remove the side markers? I'm trying to also replace them with led but I'm struggling to remove the housing. Thanks!
I never looked up how to do it. But you can access the screws from inside the bumper. You’ll have to unclip and peel back the fender lining to access them. Pretty easy tbh. If you have any trouble message me on IG and I’ll walk you through it via video message.
@@BrotherlyReviews Oh okay got it that makes sense, thank you and i appreciate it. I’ll make sure to dm you if i need anything🙏🏽
U didn't show how to replace the passenger side
Passenger side didn’t require much. I just reached in and removed the bulb.
@@BrotherlyReviews from the hood ....or from. Fender wheel cover ?
From under the hood
How can I do the lower turn signal mods where and how
Lower turn signal? I don’t understand
Can you drop a link for the fog lights ?
I bought them locally at a shop. It’s the shop’s own brand. Syneticusa is a great brand. I have a few other led bulbs by them and still working perfectly years later.