I'm inspired, looks so professional. The way you have done this is so simple, but effective, way easier than some guides out there. Now to go and make some mockups then the real thing.😮
oh my god, thats genius! so, you just scored the acrylic, so you could weed the letters etc, rather than cut or engrave, and then sprayed each layer? that is seriously good..thank you so much...once again Terry ..
yeah you can do some real nice deigns like that, just want the score power strong enough to cut the paper really. So many things you can do on that laser really.
Just watched this, tell me, what acrylic do you use, and whenever I score acrylic on my laser, then spray, I always get micro cracks and paint bleeding....
this is clear cast acrylic, i did have one before that ended up with the micro cracks and i believe it was due to the room temp when i sprayed just make sure the temperature is a nice room temp like 70 degrees and give each layer plenty of time to dry and you should be ok (Y)
Excellent looking sign! Thanks for sharing this technique! I'm gonna go try it right now. Any tips on the best way to use this way to produce 50 of the same sign? Thanks 😊
i did do multiples before, you just have to make sure your layers are split up correctly and then you can use the array tool to make as many as you like.
MY MAN!!! Dude you always have some great content!! Can you do a video on using tiles wether it be white tile painted black or white tiles painted white?
Beautiful sign. Thank you for the tutorial. Very helpful.
I'm inspired, looks so professional. The way you have done this is so simple, but effective, way easier than some guides out there.
Now to go and make some mockups then the real thing.😮
Amazing work, and thankyou for the tutorial!
Thank you and thanks for watching.
Thanks, for the tip about going to the layer & holding shift to high light all in the layer will come in really handy 🙂
awesome yeah it saved me a few times :D and right clicking on the layers so they flash saved me a few times also, thanks for watching.
The sign turned out really nice. Thanks for sharing.
Great job!
Thank you
Loving your content 👍 looking forward to the next one. Greetings from the UK
Thank you.
Thanks for the AMAZING sign, your creativity never ceases to amaze me my friend ❤❤❤
No problem, thank you exited to see how your car build turns out and hopefully one day make it to a track where you are and get some photos.
oh my god, thats genius! so, you just scored the acrylic, so you could weed the letters etc, rather than cut or engrave, and then sprayed each layer?
that is seriously good..thank you so much...once again
Terry ..
yeah you can do some real nice deigns like that, just want the score power strong enough to cut the paper really. So many things you can do on that laser really.
Awesome sign. Can’t wait to try. How do you seal the back and make it smooth for a finished product? Thanks!
Thanks, you could stick another piece of acrylic on the back and that would finish it off, i would use 3m double sided tape. thanks
brilliant thank you i was looking to do this on some small christmas decorations and checking out your video's was the first thing i did
yeah it really is a good way just remember to mirror it :D
Just watched this, tell me, what acrylic do you use, and whenever I score acrylic on my laser, then spray, I always get micro cracks and paint bleeding....
this is clear cast acrylic, i did have one before that ended up with the micro cracks and i believe it was due to the room temp when i sprayed just make sure the temperature is a nice room temp like 70 degrees and give each layer plenty of time to dry and you should be ok (Y)
@@carphotography Thankyou, will give it a try. Subscribed now, had a laugh on your video with the hand, saw and hammer.....🤣🤣🤣
@@mazzugara lol yeah was a fun one to make , i still got the hand maybe i get a slow mo golf swing on it :D
@@mazzugara judging by your name you might like my other channel :D ruclips.net/channel/UCi1n1vB3PGHl3eMfsewuZeg
Another subscriber, congratulations on the channel👍👍👍👍👍👍
Thank you and thanks for watching and subbing
LEGIT
So did the glow in the dark work like you expected or was that part not worth it? Can't really tell from the video. thanks.
it was very faint, didnt show great not really worth it in my opinion but worth a try :D
Excellent looking sign! Thanks for sharing this technique! I'm gonna go try it right now. Any tips on the best way to use this way to produce 50 of the same sign? Thanks 😊
i did do multiples before, you just have to make sure your layers are split up correctly and then you can use the array tool to make as many as you like.
@@carphotography Thank you 😊
This is just Genius!! Learn a lot today with you mate, keep it up.
This is a 1/4 acrylic or 1/8?
Thanks!!!
it is 4.2mm thick i think 5/16" roughly , thank you glad it could help.
MY MAN!!! Dude you always have some great content!! Can you do a video on using tiles wether it be white tile painted black or white tiles painted white?
Thank you, yes i will make sure to do a tile video in the near future, thanks for watching and commenting (Y)
@@carphotography AWESOME, thank you!!!!
What thickness is the acrylic?
3/16" i believe around 4.2mm
What brand of paint do you use to print acrylic
I normally just use rustolium :D
Is the clear spray Varnish ?
No the clear spray was green glow in the dark, was just a test as it was clear, then i added green over the top to make sure.
😀👍
Terrible instructions
surprised you didnt get it just from the video even on mute. what dont you understand ? i showed the full process.