Firestorm 100 Max VS. Phantom 85 V3 - Motorized Bicycle Engines
HTML-код
- Опубликовано: 15 сен 2024
- Please subscribe for more! Today in this video we will unbox, setup and install the new Firestorm 100 Max(78.6cc). This engine comes with a 50mm bore and 40mm stroke. Checkout the video to find out who wins.
Link for the Phantom 85 V3: www.bicycle-en...
Firestorm 100 Max: www.bicycle-en...
Gold gas cap: amzn.to/3XZuH9r
26” 12G Spoke rims: amzn.to/3JavKOr
Valve stem caps(purple): amzn.to/3IC7VPi
Seat post clamp: amzn.to/3kz1Rzi
Pedals(purple): amzn.to/3Z3jGW7
Dual brake handle: amzn.to/41sPJjT
Pipe silencer: amzn.to/3SzoyQ9
Bike lights: amzn.to/3SzoyQ9
Handle grip(purple): amzn.to/3kB2iJ9
Thumb throttle: amzn.to/3ITqiQb
Purple Skeleton decal: amzn.to/3kt7dvT
#motorized #gasbike #2stroke #fast
I have a phantom v3 with almost 10k miles on it with a 34 tooth sprocket that would top out at 41mph on flat ground with my 250lbs on it at 65°f and 26" wheels.. I took my dremel and ported and matched the intake and exhaust ports and lowered my jet to the highest setting, and run 25/1 mix and now I hit 50 mph on flat ground.. 52 if i run 93 octane... The phantom is a beast!!!!!❤
Running that speed with a Stock chain??
Why not run closer to 40:1?
@@shtboxgarage20:1 for phantom. Everything else 40:1. Cuz kaboom if not
I went and bought. 025" copper plate from the hardware store. And cut out my own head gasket. Then I heated it up with a propane torch to cherry red and let it cool naturally. This anneals the copper (takes out the work hardening from the manufacturing process) and makes it much softer for a way better seal than the aluminum gaskets. And boy did I notice a difference instantly! I also have mine on a trike built off of a schwinn stingray and a headstrom rearend. My rear end has independent axles with freewheels on both axles. So I always have two wheel positive traction going forward and one wheel can turn faster than the other so I can turn corners. But I have to start the engine with the pedals. So that puts my sprocket ratio at 25 to 22. Otherwise I have to literally stand on the crank to start the bastard. Which is ok unless I have a breakdown. Then pedaling at a near 1 to 1 ratio is tedious.
Sounds like quite a build!
Thanks for the video 📹. Just picked up the max. Should be fun. Wow that phantom 👻 😅 is something else 😳 👏 😍
Didn’t expect the phantom to run so good. Kinda Impressed
That breaking up at high rpm is because the magneto doesn't put out enough power for the dual spark plug CDI...it won't do that with the single plug set up IV got that same engine and IV tested it both ways
Have you tried the 12v magneto?
Yo MJ how's the Phantom holding up so far?
I'm not him, but I've run my v3 phantom for about a year with just over 9500 brutal miles on it and it runs like a top so far... knock on wood lol! I do run 25/1 to be a little safer tho
Great vid bud. One day I'll get my hands on a Phantom 85......one day🤤
Wow, the LD100, I kinda want that engine. However, that 33 mph was unimpressive. I bet that exhaust gasket screwed you up
For real.. 33 is a bit of a disappointment. I’m sure with porting it’ll fly
@@fabianse hey Fabian, the porting was supposed to be good on one of these. I think it still has the port duratuon problém like the yd100 does. Needs like a 8mm spacer and a head shave to have proper timing
Yes it did. It blew the gasket. I fixed it and did 39mph. It needs a main jet tuning. 😊
@@MJTechChannel ahhh okay okay
Where can I purchase one of those engine stands you are using to work on the engine? I've looked everywhere but can't find them.
You're back onto bikes. Finally.
Yup it’s the season! 😊
@@MJTechChannelLoving it!
33 is really disappointing! I've done 40 mph on a BBR engine. It had all the performance parts but still
It blew the exhaust gasket I’ll do a new speed test soon.
they are more torquey tho not as high revving
@@MJTechChannel you should buy an all metal gasket. Hughes motorized has a link for a gasket for a sensor for something on a car that's all metal and exactly the same size as an exhaust gasket
Thought it went 41mph?
10:45
Oh looks like a spike glitch
the exhaust leak sounds great! Could you please do comparison of a YD85 52mm engine?
So I've built a bike with stock Zenoah 29cc and I promise it will leave either of these bikes long beyond the blue Smoke🤙 I do like the manual clutch on bike kits but motors just don't compare to RC motors.
U have no vids on ur channel of it ill belive it when I see it
No you didn’t
I'll believe that with some photographic evidence
Even if u did, it must be super expensive to run all that nitro meth at 80 bucks a gallon
Just got my Zeda max 100 . It’s my 1st build so I hope it turns out well.
How’s it goin
Can't wait until they make a good expansion chamber for the phantom 85
They should and quick
@@MJTechChannel should really open it up. I got a different reed valve so I can put on a 22mm carb
@@MJTechChannel I'm going have a garage make me one I don't want to wait
Phantom 85 is hands down a stronger and better built engine. However, not for the beginner. You should still tear down the case and do a thorough cleaning, chase all the mounting threads including cylinder and use locktite blue on the studs! Then you'll have a reliable motor
Need to upgrade the bicycle model, make luck lake electric bike 😅
The double spark plug what gives more than the one spark plug?
Should get the expansion chamber pipe they offer
I've got a question. I noticed you have a disc brake on the rear of the silver bike. Did you modify it to work with the chain sprocket? I'm looking for a bike for the engine I just ordered and I would prefer disk brakes.
Fax, the phantom 85 will always be THE phantom 85. Something abt riding the phantom just feels so different from the other bikes
Gotta fix mine asap
Is that Phantom 85 reliable now? Also, is that felt faker clone durable frame and wheels? I'm guessing it is also from Bicycle Engines also?
It is soviet union engine f 80 and f100 what's was copied by China 🇨🇳 and sell it to you for 600% more of the real price) but soon in usa black monkeys says to you to drive only with bml flag and suckoff for LGBT) u pure usa. Still think that you exists lol
Really wanna buy my first engine…that being said it would mostly be used for commuting. My daily commutes are between 8 and 15 miles and around 20-30 minutes. I need something reliable but also fairly quick as I’d like to get there within the same time as a car. I was looking at both these engines as well as a bbr 66/80cc and a Zeda 80. Just not sure what to go with. I need something I can hop on and just go with whenever though. Please help. Looking for some good reliable options and resources. People who have used these engines for over 1,000 miles that can honestly say they’ve been great with little to no down time.
Please help!
I went with the bbr stage 4 kit for head it comes with. Dm me and I can let you know everything I did to have a well sorted bike that was pretty reliable and quiet and quick.
Or I guess can't dm. Respond and I'll give you a list of everything
You will need to collect multiple clutch and throttle cables. A few cdi to have on hand. A billet sprocket adapter. A 36t gear. Nt speed carb. Don't even bother with that HP carb. Buy a couple carb jet kits. Mz65 exhaust pipe. A silencer muffler from Amazon. Gold HD chain. Dual brake lever. Billet throttle assembly. SS bicycle brake cables for your clutch and throttle cable. Exhaust wrap the chamber and Coat it in high temp copper Silicone to keep it from coming apart and getting on your clothing and to keep from burning yourself. A bigger gas tank. I gasket port matched and so on for exhaust and intake. Good tires and brakes. Brakes don't have to be disc. Just make sure to use the proper compound for high speed. More for like dh mtb
If you want dependability and get on and go, get a 4 stroke.
hey whats the most reliable engine i can buy
Great video 📹
Can you share with us what set up do you have far is front and rear sprocket
There's going to be a really big difference with the upgraded muffler
Thanks for the info very helpful
Where u get ur stuff for bike frame for phantom and ur frame with built in tank
Yes man I &I was checking out the Fire Max 100 what's the stamp on the crank rod??? Cylinder look look LD 100 cylinder looks like the seller give it a fancy name for sale looks like a YD bottom. As you were
Which tooth would be best I’m thinking the 44 but I don’t know more sounds better but what do I know
Do you have a link for the front forks? On the LD
amzn.to/3UQow7D
Bro in the phantom 85 the Fzero frame what size is the fork and the rims?.... Is it 26ER?
A better carb on it and muffler the phantom will scream do they make racing mufflers for it now and will a 22 mm racing carb will work on it
I have ? , i ordered a phantom 85 v3 not try to go fast im 50 yrs of age will that engine run well on a fat tire bike
Bro may I ask what size is your tires at the phantom 85 is it 26ER?
Just trying to understand so the 100cc gos 45top speed
What phone holder is that and the GPS app?? Thx
What oil do you use for this engine? I can’t seem to find what’s mentioned in the instructions as “Valvoline Two Stroke Racing Oil,” is this the same as Valvoline multi purpose oil for two stroke engines? I also already have Lucus’s semi-synthetic 2-Cycle oil, is it safe to use?
They say not to use synthetic
What kind of carburetor are you using and link??
Vm18 clone amzn.to/43FkF1o
@@MJTechChannel and what size oz reed did you use??and link to Jets??
@@TalariaMonster413 40mm for the bolts and the intake size is 23mm.
@@MJTechChannel what size jets do you recommend for the vm18 ?
I guess I should watch the video first try putting that upgraded muffler on the phantom 85 but you hit 55.60 mph
I would like to have like a 5455 mm. Piston window piston would up. With a pork chop and I want balanced and I don't care what it cost. I just need to know where I can get obecause. I'm not even running a rebel over anything. I'm running a speed carburetor at times and I'm doing 55 and they will run at a 100 I can't name wallet. I take the heads off. And pistons are spotless clean.
I have never had one full walk. I've always had good luck. I've taken receipt of the heads. Shine them right up with 6000 grit paper and then put a new gasket in a center gas. Ket and put that back together and nice things, why? They fly. I want.
A pork chop. I want a balanced job. I want a shaped head job. I want everything to make it run right? Advanced timing. I want it all. I want to rebuild. I want a shorter intake. I want a bigger carburetor I want all of that racing had twin so twin spark plugs. I want to buy ballast cart crack frank😅
How much tight pully need or near wheel please guide
Half an inch of free play up and down tension. Just like motorcycles
Phantom 85 is simply the best, it be great to put that dual sparkplug setup on it and see what happens
That's not a fair comparison with a small muffler in a big muffler on the other one
28 tooth?
how do i know if I need a larger or smaller jet
If it bogs at high rpm or you feel like it hits a sort of "Rev limiter" before it should the u prlly need a bigger jet, unless you can adjust the needle more than it already is.
44 is pretty fast.
👍👍👍
Acelera esse troço é meu botou de 60 cilindradas mais forte
Can you test some really steep hils with phantom 85? thanks
And when I put a motor together. I oil I grease everything except for the clutches. But that gear, you say, put a little dab grease in there. B*******, you pack it in there. You just don't want it get to the clutches. That Motorola never quit. If you do that, shave, the head down Polish it put that on it's still stock and they're doing fifty-fifty 5. I have a new script with the timing or anything.Where can I find a motor
I use 93 I can't and I can't boost. I'm running about a $100 and these things fly. And they're only 80 CC f****** 2 China dolls. I don't know, I am awesome using amballs. The real past 2 with that chainsaw hat with PZ20 carburetors. I'm doing 50 miles an hour. 55 even and I want a bigger motor I want something like 10 horse 11 horse.I want to have it built.I need to find a good motor that will roll that high in bored with the other ones.I need more
hermano dígame qué le podemos decir qué le puedo echar a la bici moto al tanque qué gasolina que todo que se le
qué se le puede y qué se le puede cambiar de qué aceite se le puede cambiar a la al tanque al motor el motorcito
digo yo también estoy comprando helado compro una una una
Nota 10
digo yo también estoy comprando helado compro una una una bueno tengo bicimoto con espejos pero me hace falta estar el motor y
digo yo también estoy comprando helado compro una una una bueno tengo bicimoto con espejos pero no tengo no tengo no tengo hermana tengo ganas de mandarlo a instalar pero
me hace falta estar el motor y
Yo compre ese doble candela y puedo desir que es una basura el yd100 original sin modificar tiene más potencia
digo yo también estoy comprando helado compro una una una bueno tengo bicimoto con espejos pero no tengo no tengo no tengo hermana tengo ganas de mandarlo a instalar pero
😂😂me hace falta estar el motor y