Serpentine Belt Replacement Audi A4 the easy way !! + Tool Review
HTML-код
- Опубликовано: 25 авг 2018
- Contitech belt part number 06D903137A
link to the belt:
www.fcpeuro.com/products?utf8...
Serpentine Belt Tool:
www.amazon.com/GearWrench-368...
Astro Light:
www.amazon.com/Astro-40SL-Lum...
Happy Spannering
--Cheers
Johnny 
Авто/Мото
![Zahnriemen wechseln - Audi A4 2.0 TDI [TUTORIAL]](http://i.ytimg.com/vi/io7AP5-M3bM/mqdefault.jpg)
I did the same with my car, using only a spanner. There's no need for lifting the car and removing the underguards. This was easy 👍
Cheers johnny, went out and did mine today without removing the covering underneath, pain in the arse getting the middle part on, definately need a long hook of some kind at least 50cm long to push, pull and press the belt. Good one.
Nice work mate...and yeah that long hose pick helps a lot. 😁😁
Was doing the same on BMW 320D. Im glad we can do it on this too
thanks
Thanks Johnny，replaced the belt with my Q5, great!
Nice !!
Good job. I'd be doing it that way too lol.
Good work my friend....do it yourself ......
Well done..😎😎😎
Ah so it is possible. Will give this another shot.
i made my own from a breaker bar and a c clamp to do my 3.2 i pull it back lock it in place then route the belt on takes a few mins
When the tensioner is bad that it literally rocks/jumps, can that cause misfires? Or at least for the engine to think that it is misfiring because of course the timing will be off- which leads me to another question, can this result to p0016 code being thrown once then not anymore? For a better idea, the other morning, car cranked for like a quarter of a millisecond, basically just made a short noise like it’s cranking but car didn’t start, ran codes, threw p0016 (which means the correlation of blah blah blah is off), cleared it, right after- car started but with bad misfires. Hasn’t threw the code again, did a visual inspection and the tensioner is literally moving up and down about 2.5mm.
Regardless I’m gonna replace the tensioner but the code it threw once has something to do with the timing chain, mechanics are telling me to take it Audi, nightmare.
Really stuck in trying to replace my belt😕 my tensioner is fully spinning and I cant fit the belt on it
Any chances you can help me out somehow?
If you jack it up, you have good access to the lower pulleys.
I want to take the front off because my belt was extremely tight from day one - and I want to find out why.
Dude. What year Audi A4 are you working on?!
Could anyway confirm if this belt could be the reason to why my lights dim and brighten up while driving. Tested my baterry and alternator, both reading fine. Battery 12 when engines off and 14 while engines running. No drop in power when revving the engine with electrics on like radio lights etc
wouldn't be the belt mate... most likely it's a bad ground, or a ground that's lose or has some corrosion, look for a wiring diagram for the headlights and locate all the grounds for testing... good luck !!
@@JohnnysSpeedShop nice 1 mate, ill give that a look at. Thank you.
Interval change After how Many km?
I doing my beltm I put it on but it seems loose a lil
Hi I just finished installing the new belt and tensioner. My new and old tensioner doesn’t have the 18 mm nut that moves the tensioner. How can I remove the pin from the new one I
There might be a 15mm or 16mm stub that sticks up some had this design....grab and open ended spanner/ wrench and move it back to release the pin.... cheers...J
Got it thank you, it was a 17mm
Problem with that method is difficulty checking pulleys and tensioners.
try to do it here in finland with -10°C outside without a garage lol
ha... just call Kimi and I'm sure he would help :) lol
@@JohnnysSpeedShop yeah :D btw i tried to do it yesterday and i got it on everywhere but the alternator it was just too tight for it.. Then it ended up coming loose and i threw my lamp away and went to sleep. Any ideas why it was so tight?
I have a 1998 A4 b5 2.8 L v6 quattro. My tensioner seems to only move towards the other pulleys causing the belt to tighten. How do I create slack
You gotta force it back the other way...they hold a fair amount of tension on the belt...
@@JohnnysSpeedShop I’ve used a lot of force to move it to the left and it just doesn’t move. I feel like I’m stripping the bolt.
Ohhhh. Be careful...you have a new belt ? Just cut the old one off and pull the auto tensioner out, something doesn't sound right with your setup..
@@JohnnysSpeedShop yeah I’ve been trying to get a new belt on. When I take a ratchet and 17mm and move the ratchet to the right it moves the tensioner to the right as well. Tightening the belt.
Double check you have it routed correctly....
Would you happen to have a diagram of this cars engine? I need to replace my serpentine belt but don't know exactly how it runs through the engine. Any help would be appreciated. I have a 2012 audi a4 2.0L fifth vin letter F. Thanks
Take a picture of it before you take it off
i never understood why people dont just cut them off once they're off the tensioner
If you were sent the wrong part what would you do ? Experience will let you know why....🤣🤣🤣
Johnny I need advice
Ooooooooookay....
@@JohnnysSpeedShop I have a 2009 Audi A4 Quattro turbo 2.OL 4 cylinder. And I have a headlight out. What parts do I need?
Good video. However, if you are a larger dude or chick and don’t have the longer tools required this method might as well be impossible. Save yourself the back ache and just Jack the car up and remove the belly pan. It was the only way I could get it done. Not to mention the rigidity of the new belt kept popping it off the crank pulley.
I want tay know why some words are in Belfast accent there mucker hi.
Lol....alright there mate...what's the craic ? Aye, lived there for 20 yrs before moving to yank county..😆
Too much talking.....
Couldn't see and you didn't show where the tensioner belt is. You couldn't see anything you were doing.
Yeah....there's no fucking room at all.....
theyre not super expensive......$77.36
Yup😂
First go and learn how to shoot video and explain the structure to mechanisam..
First go you and recognise he's just an average guy trying to help people with a job.
If it's not hitting your standard go watch some shit on Netflix!
He's not under any obligation to help anybody. He's done it out of the kindness of his heart.
I genuinely appreciate it.
phuck me i thought it only had a timing chain! nice hair line
You thought a car only had a timing chain for everything? Yeah you are retarded...go get yourself a hairline like mine and enjoy.... jeeezzzz