The most explanatory video on RUclips for changing the timming belt and water pump on this engine. And also keeping it as simple as possible. Congratulations, and thank you for that!! Is that the CGLC engine code by any chance?? I'm tempted to do this operation myself, that's the reason I'm asking. Thanks again! All the best!
Duuuude, it stopped my heart, even tho there was a happy ending. Thanks for the video, will be preping on changing the belt myself. Really do not want to pay 2000€ in Germany.
Should use a proper locking tool on crank sprocket,slacken bots on high pressure pump,set timing set belt tension tight bolts on both pulleys(,an inai kit like he used comes with new cam bolts) then do two revolution the recheck timing,tip ex isn't always good enough in these engines,but if it works it works,still a good. Video and u can use two long bolts to supprt the radiator assembly when its pulled foward , extremely lucky leaving those bolt's in ,ive done it too😢
he used power tools on torx bolts, first he rounded up the start to record and showed exactly how he destroyed bolt in first place... But other than that thank you for the video :)
Hi Everyday Value mechanic, Where about you base? I ask because I need good mechanic for my Audi A6 C7 2.0tdi. If you nearby I have few jobs asap. Thanks
@EverydayValuedMechanic I'm from S.Yorkshire so 1.40hr driving. I need few jobs done like engine mount bushes,front suspension lower arms, Prevented jobs like Odma - Oil separator or PCV Valve Sonda Lambda Glow plugs New crankshaft pulley and new drive belt Then in August/Sep new clutch and flywheel Problem is you abit far away I just need good Audi specialist to make car like new but somewhere closer .
@@1caspersky1 I would recommend to find garage closer to your home, not only you gonna save money on fuel but also, if there will be some hickups and cars stays on the ramp over night you not gonna have place to stay over night.
The most explanatory video on RUclips for changing the timming belt and water pump on this engine. And also keeping it as simple as possible. Congratulations, and thank you for that!!
Is that the CGLC engine code by any chance??
I'm tempted to do this operation myself, that's the reason I'm asking.
Thanks again! All the best!
Hi, yes it is CGLC engine code, thanks for watching.
Very lucky save there with leaving bolts it, great informed video
That somewhat reminds me of doing the timing belt on my v6 Passat b6. I'm sure you've done that sort of VAG engine before.
I thought a sh1t too on first start, but credit to you for leaving the mistake in the video.
Thanks
Duuuude, it stopped my heart, even tho there was a happy ending. Thanks for the video, will be preping on changing the belt myself. Really do not want to pay 2000€ in Germany.
Happy to share emotions, good luck with your upcoming job, hope this video gives some help! 😇
Long live old Cars and Chain belts.
Should use a proper locking tool on crank sprocket,slacken bots on high pressure pump,set timing set belt tension tight bolts on both pulleys(,an inai kit like he used comes with new cam bolts) then do two revolution the recheck timing,tip ex isn't always good enough in these engines,but if it works it works,still a good. Video and u can use two long bolts to supprt the radiator assembly when its pulled foward , extremely lucky leaving those bolt's in ,ive done it too😢
Hi, thanks for watching and advise, I just now bought proper timing tool set and the next one comes in I will do it the way I am suppost to do it!
Why not use 2 long bolts to put the front in servicemode? To lock it use a 6mm drill...
It make sense now, maybe something i should consider in future, up till this moment I never encounter problem with these shorter bolts
he used power tools on torx bolts, first he rounded up the start to record and showed exactly how he destroyed bolt in first place... But other than that thank you for the video :)
Thanks for comment!
Excellent video mate!
Do you think its possible to do the auxiliary belt without removing the whole front end?
Hi, yes it is possible and I have video how to do it - you can watch it here
ruclips.net/video/Le79Z-noviw/видео.html
Thank you!
Yes
Hello how much money just for change workmanship?
Why was it not turned over by hand before starting?
It was, at 28 minutes.
I did, but they i lock it again and second time I didnt turn by hand as in my head i already turn it
🎉😊❤
That’s been done wrong
The 3 bolts on the cam sprocket should have been loosened first before setting the tension
Thanks, i’ve keep that in mind
he made several mistakes and it was necessary to replace all the new screws that came to him
Even the high pressure pump gear should be loosen too while tensioner is set. For this work you should review the manufacturer introductions.
Hi Everyday Value mechanic,
Where about you base?
I ask because I need good mechanic for my Audi A6 C7 2.0tdi.
If you nearby I have few jobs asap.
Thanks
Hi, garage where I am working called RedLine Garane, LE111ED
@EverydayValuedMechanic I'm from S.Yorkshire so 1.40hr driving.
I need few jobs done like engine mount bushes,front suspension lower arms,
Prevented jobs like Odma - Oil separator or PCV Valve
Sonda Lambda
Glow plugs
New crankshaft pulley and new drive belt
Then in August/Sep new clutch and flywheel
Problem is you abit far away
I just need good Audi specialist to make car like new but somewhere closer .
@@1caspersky1 I would recommend to find garage closer to your home, not only you gonna save money on fuel but also, if there will be some hickups and cars stays on the ramp over night you not gonna have place to stay over night.
@@EverydayValuedMechanic totally agreed mate.
You have a good one
i thought these had a chain??
Hi, petrol ones do, but not the diesel
Obviously not
A very butt very good and honest video . The details are beautiful and very informative. I simply love it 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Thank you, much appreciated!