Absolutely bang up video man.... great job... I picked up a smaller SC series cutter to use at fairs and festivals as a portable set up, and you addressed every issue I had during set up and initial cutting. This cutter is very different than my larger Copam... Your vids have gotten me that much closer to getting it dialed in nicely...
Thank you so much for this video...... The cutter comes with no real information on how to set up or use from the supplier. I bought this machine in april and never done any cutting with it as I had no information on even which blade to use. We need more people like you to give a first class demonstration on how to use this machine. Thank you once again and please show more videos on this machine. Any videos using this machine with flexi starter would be appricated.
Awesome! You just helped me out on how to get this thing working! Time to get cutting on stuff! Thank you! One of the best videos out there! You did a wonderful job explaining everything.
I have this same plotter now for over a year. It still deliveres good quality cuts. The only problem I'm having is cutting during the winter. In winter time the humidity in my office is pretty low (
I have the same plotter but i have a problem on taking out the paper later. How can i measure the pressure i have to use. I did with 400mm and 12g as you do on the video but I dont have the same results as you do.
yeah i bought this back in august, still havnt cut anything. how do you get it to read registration marks for heat transpaper tshirt designs? its one thing to cut on your vynil randomly, another to line up those registration marks with the 'optical eye'
This is a feature found in your rip software. For example if you are using a large format printer such as Roland or Mimaki, and your design software is Flexisign (variety of software that works this way), you will have the option to send to the "production manager " or RIP both a print file as well as a separate cut file. Many of these printers will do both while the media is in the Machine, however if you wish to Laminate your media or your printer is only print and no cut, you have the option to add to the print file a few different registration marks that the optical laser can scan and calibrate to ensure accurate cuts. There are 2 basic registration marks to consider which one you choose simply depends on how large your image area is. For example if you are outputting a 2ft cut the marks will only be at the four corners or osd and when you send file, the plotter will search for and locate all four before beginning and with a much longer tile or image area, the marks will be distributed more frequently along the edges as well as the corners to ensure the media is tracking correctly and is square.. in short, using the optical option on a plotter requires rip software that supports it.. There are some that require you to manually line up the marks one at a time before cutting while a red laser beam guides you.. I hope this helps and please feel free to contact me if you have further questions.. I'm happy to assist as I have been in the Industry for many years..
I just purchased this cutter and really didn't have much of an issue getting it to print on an iMac using OSX 10.7 and SignCut Pro which came with the cutter. Basically I installed the software, and it asked what cutter I was using.
hey i just had the same problem with mines....I looked close at the part that holds the blade and it was leaning...It was becuse one of the white wheels on the blade holder part was not on track...look close and see if that works.
I need to know how to re-align this, i have tried to cut things today but nothing will cut properly i have done the test and it is completely off, how to i make it right?
got mine today. as soon as I turned it on the carriage went to the right and started vibrating there. Nothing else happens. Is it broken or am I doing something wrong?
hi, i got a question, i have the same plotter but with another brand (DINGTEC) where i could find the drivers?, because i cant run this machine in any SO (Xp, 7, etc).. what can i do, please help me, thx
hello, i have the same model as your video but has been stuck for many years, i wonder how can you help me about it. the problem is the cutter plotter is turning on when pressing the switch but the display and power LED doesn't light up, i pressed all the buttons and it doesn't respond. only the motor sound can be heared. I would appreciate any inputs from you. thank you
That explains quite a bit. Many of the steps the instructions called for seemed unnecessary. Are you using any of your cutters with OSX? I thought about starting a video tutorial using Macs as I couldn't find any when I was researching this equipment.
I have a problem, overnight it broke and nothing appears on the screen, what can be done? is it possible to fix it? the light stays on but nothing is written.
WHERE I CAN GET THE SOFTWARE AGAIN? CUTTER MASTER V8? I BOUGHT THIS PLOTTER A COUPLE OF YEARS AGO AND I LOST DE CDS, HELP ME PLEASE, I DIDNT FIND IT, NICE VIDEO BTW! THANK YOU
I would find a screw on the bottom that is connected to the main plotter and attach a small wire to it and then the stand. look here about 4 min in MH871 uscutter from box to decal
this machine is the same as mine, but I can't use mine I don't know what's wrong every time I proceed to contour cut the cutting time counter was counting it shows the percentage of cutting time but the machine not working is anybody here can help or advise me? about this problem an earlier yes I abled to use the machine but now I cant.
can anyone help me I have this vinyl cutter and illustrator, but have no software to cut my vinyl, i refuse to pay a £300 subscription to cut my designs. any free softwares? thanks
Bonjour à tous. j'ai récemment fait l'acquisition d'un plotter de découpe de type sc631e, malheureusement je ne dispose pas des drivers pour mon système d'exploitation. windows 7. quelqu'un aurait l'amabilité de partager ses drivers. la maison maire n'est pas joignable. merci beaucoup pour votre aide.
hola..!!! a todos... nesecito instalar mi plotter que acabo de comprar pero no consigo como instalarlo, tengo un pc con window 8.1, les agradesco ante mano de toda la informacion que me puedan aportar.......
HEY USCUTTER!! ***NOW IF I COULD, AT ALL, FIND ASSIST IN HOW I CAN ADJUST THE BLADE OFFSET!! CUTS ARE NOT FULLY COMPLETE! MUST BE ABLE TO ADJUST IN ACORD TO THE BLADE DEGREE AND THE MATERIALS TO WHICH MAY BE CUT!!!*** BEGINNING CUT DOES NOT MEET WITH END OF CUT MAKING A HINDERENT OR VERY UNPRODUCTIVE WEEDING PROCESS!!
I did not make the series as I had intended, but I have my cutter working perfectly now. It took a little bit of work, but after downloading a couple of updates I am running just fine. Can you inbox me your email address so we can communicate directly? What cutting software are you using?
Had one of these years ago, pure rubbish, wasted more material than it cut, just buy a graphtec or a roland or summa, even some of the cheaper ones now come with a servo motor,
I have had this machine for 5 years and its NEVER had any issues- I LOVE it. I just recently had an issue changing the blade but that is IT
Absolutely bang up video man.... great job... I picked up a smaller SC series cutter to use at fairs and festivals as a portable set up, and you addressed every issue I had during set up and initial cutting. This cutter is very different than my larger Copam... Your vids have gotten me that much closer to getting it dialed in nicely...
Agreed.
Espanol - Mismo Por Aqui
English - Same Here!
I've just acquired this cool Plotter/Cutter from my Niece.
Thank you so much for this video......
The cutter comes with no real information on how to set up or use from the supplier.
I bought this machine in april and never done any cutting with it as I had no information on even which blade to use.
We need more people like you to give a first class demonstration on how to use this machine. Thank you once again and please show more videos on this machine. Any videos using this machine with flexi starter would be appricated.
Thanks God for RUclips! Thank you for this video!!! I've been trying all day to figure out how to insert a knife and then I find your video))))
Awesome! You just helped me out on how to get this thing working! Time to get cutting on stuff! Thank you! One of the best videos out there! You did a wonderful job explaining everything.
Would you guys recommend this plotter for everyday cutting? Not looking for a work horse but just to cut out a simple decals maybe a few 5" decals?
Thank you for taking your time to share with us this - really useful!
This was extremely helpful. Thank you for taking the time to do this video
I have this same plotter now for over a year. It still deliveres good quality cuts.
The only problem I'm having is cutting during the winter. In winter time the humidity in my office is pretty low (
I have the same plotter but i have a problem on taking out the paper later. How can i measure the pressure i have to use. I did with 400mm and 12g as you do on the video but I dont have the same results as you do.
yeah i bought this back in august, still havnt cut anything. how do you get it to read registration marks for heat transpaper tshirt designs? its one thing to cut on your vynil randomly, another to line up those registration marks with the 'optical eye'
This is a feature found in your rip software. For example if you are using a large format printer such as Roland or Mimaki, and your design software is Flexisign (variety of software that works this way), you will have the option to send to the "production manager " or RIP both a print file as well as a separate cut file. Many of these printers will do both while the media is in the Machine, however if you wish to Laminate your media or your printer is only print and no cut, you have the option to add to the print file a few different registration marks that the optical laser can scan and calibrate to ensure accurate cuts. There are 2 basic registration marks to consider which one you choose simply depends on how large your image area is. For example if you are outputting a 2ft cut the marks will only be at the four corners or osd and when you send file, the plotter will search for and locate all four before beginning and with a much longer tile or image area, the marks will be distributed more frequently along the edges as well as the corners to ensure the media is tracking correctly and is square.. in short, using the optical option on a plotter requires rip software that supports it.. There are some that require you to manually line up the marks one at a time before cutting while a red laser beam guides you.. I hope this helps and please feel free to contact me if you have further questions.. I'm happy to assist as I have been in the Industry for many years..
Ha!!! You asked this 12years ago!! Oops😂
Hi there is this one has optical eye?
I just purchased this cutter and really didn't have much of an issue getting it to print on an iMac using OSX 10.7 and SignCut Pro which came with the cutter. Basically I installed the software, and it asked what cutter I was using.
hey i just had the same problem with mines....I looked close at the part that holds the blade and it was leaning...It was becuse one of the white wheels on the blade holder part was not on track...look close and see if that works.
I need to know how to re-align this, i have tried to cut things today but nothing will cut properly i have done the test and it is completely off, how to i make it right?
your the best u just saved me time and money
is it possible to engrave wood or metal with this machine, if so what accesories do i need.thank,s john
got mine today. as soon as I turned it on the carriage went to the right and started vibrating there. Nothing else happens. Is it broken or am I doing something wrong?
hi, i got a question, i have the same plotter but with another brand (DINGTEC) where i could find the drivers?, because i cant run this machine in any SO (Xp, 7, etc).. what can i do, please help me, thx
liyu sc 1261 is working on illustrator files?
hello, i have the same model as your video but has been stuck for many years, i wonder how can you help me about it. the problem is the cutter plotter is turning on when pressing the switch but the display and power LED doesn't light up, i pressed all the buttons and it doesn't respond. only the motor sound can be heared. I would appreciate any inputs from you. thank you
Can I use this to cut on A4 card stock? I want to design my own business cards and have them cut myself.
Hi there can you contour cutting with this machine even there is no optical eye
Many Thanks
when im trying cut some big sign on left sign the cutter dont cut and on the right side cut to deep...how if i can calibrate that machine?
Thank you very much.worked perfect first time. Much obliged
Thanks for the information! Great tutorial.
When you cut from the origin, where does the vinyl need to be set?
Hiya... can you tell me where the emergency stop and pause functions are on this cutter please so if it goes crazy whilst cutting I can stop it! lol!
Bravo sir! This helped out so much! Thank you!
Ive just chaged software, it cuts to close to object, how do I change edge box or boundry box.
How do i stop my vinyl shotting of to the left when cutting.
I feed the vinyl in but when cutting it goes off to the left ??
hello sir can you send me a software?
hi do you have a driver for windows 10 for this? thanks
bought liyu sc30 while back off you my lcd broke..can yu supply replacement lcd...I tried every where to get on.?
That explains quite a bit. Many of the steps the instructions called for seemed unnecessary. Are you using any of your cutters with OSX? I thought about starting a video tutorial using Macs as I couldn't find any when I was researching this equipment.
do you sale mainboard for this cutter?
My clothing vinyl keeps moving over when cutting how do I stop it, and keep it straight
I have a problem, overnight it broke and nothing appears on the screen, what can be done? is it possible to fix it? the light stays on but nothing is written.
Thanks for the video
How to get the drive for that cutter
Thank you Sir. Your video was very helpful.
out how this machine ?????
Do you send to Brazil ???????
Hii sir
Help needed
When i send the file from flexi machine shows cutting but actually it is not cutting the only screen shows cutting
como se calibra la presión de los rollers?
Hi guys! Please help me, I need Liyu sc-e series from win 10 drivers . Where could I find him?
Hello sir my sc cutter motor is is running without stopping.what can I do?
WHERE I CAN GET THE SOFTWARE AGAIN? CUTTER MASTER V8? I BOUGHT THIS PLOTTER A COUPLE OF YEARS AGO AND I LOST DE CDS, HELP ME PLEASE, I DIDNT FIND IT, NICE VIDEO BTW! THANK YOU
Really helpful thank you
Did you get my emails... Just wanted to check as I never heard whether it helped solve your issue.
can this machine cut through paper ?
I would find a screw on the bottom that is connected to the main plotter and attach a small wire to it and then the stand. look here about 4 min in MH871 uscutter from box to decal
hi there pls help
every time i click on cut plot on art cut program always stopped?
my cutter does not turn on. only the cutter head moves up and down and the display flickers.
i need a mainboard for a liyu SC-631E
موجوده فين فى اسيوط
donde consigo el driver
this machine is the same as mine, but I can't use mine I don't know what's wrong every time I proceed to contour cut the cutting time counter was counting it shows the percentage of cutting time but the machine not working is anybody here can help or advise me? about this problem an earlier yes I abled to use the machine but now I cant.
how can i buy this machne
How to set up liyu to signmaster,?
I need help. I bought this cutter and doesn't work on my laptop. unknown device and DOWNLOAD ALL DRIVERS AND RESULT ....UNKNOWN DEVICE
WIN 7
can anyone help me
I have this vinyl cutter and illustrator, but have no software to cut my vinyl, i refuse to pay a £300 subscription to cut my designs. any free softwares? thanks
how many price in pakistan
Thank you very much!
Bonjour à tous. j'ai récemment fait l'acquisition d'un plotter de découpe de type sc631e, malheureusement je ne dispose pas des drivers pour mon système d'exploitation. windows 7. quelqu'un aurait l'amabilité de partager ses drivers. la maison maire n'est pas joignable.
merci beaucoup pour votre aide.
i have a plotter HC 1201, SERIE NUMBER 01200530, LOST DE USB DRIVER, can you helpme re-install to windows 7, please?
I also have this model. How to get driver for this plotter. I am using win7 64 bit.
how out line use
Same machine as the USCutter SC.
just brand name changed
hola..!!! a todos... nesecito instalar mi plotter que acabo de comprar pero no consigo como instalarlo, tengo un pc con window 8.1, les agradesco ante mano de toda la informacion que me puedan aportar.......
Thank you for this. I've had this cutter since September and it hasnt delivered shit! Excuse my lango. Smh
is der anyone here a driver on that cutter plotter for windows 8 64 bit? can u give me a link please???
Any luck on driver info???
HEY USCUTTER!!
***NOW IF I COULD, AT ALL, FIND ASSIST IN HOW I CAN ADJUST THE BLADE OFFSET!! CUTS ARE NOT FULLY COMPLETE! MUST BE ABLE TO ADJUST IN ACORD TO THE BLADE DEGREE AND THE MATERIALS TO WHICH MAY BE CUT!!!*** BEGINNING CUT DOES NOT MEET WITH END OF CUT MAKING A HINDERENT OR VERY UNPRODUCTIVE WEEDING PROCESS!!
use enter on the machine
Use a humidifier in your office
I did not make the series as I had intended, but I have my cutter working perfectly now. It took a little bit of work, but after downloading a couple of updates I am running just fine. Can you inbox me your email address so we can communicate directly? What cutting software are you using?
Pls sir can u halp me?
hey there.... i would like to buy one LIYU SC T631E Cutter.......can we speak detalils on yahoo messenger of mail ?
Had one of these years ago, pure rubbish, wasted more material than it cut, just buy a graphtec or a roland or summa, even some of the cheaper ones now come with a servo motor,
This looks cheap compared to the Roland GX Pro that we have...
Tamil place
/watch?v=VjkAAiioKWA
plug it in? are you fucking kidding me
I can't understand him.
This plotter cutter Liyu SC631E is impossible to configure on mac. Don't waste your money on it.
don't worry, must people don't use mac
Oh I read that it's not compatible with mac.
Sir, What is the exact cutting pressure and speed when cutting a dark transfer paper? Thank you
bought liyu sc30 while back off you my lcd broke..can yu supply replacement lcd...I tried every where to get on.?