CAA also has a RUclips channel that comes out once a week. It addresses problems customers may have with the mck. That’s how I figured out the issue I had with mine.
DJ. I had the same problem with the sameGL21 and mck. Two things: you’re not pushing the button on the flap that locks the barrel in. It needs to back up and then 2. Take a screwdriver and push the barrel down in front until it’s in place(Look down the barrel shroud and you’ll see it needs to be centered ) once the gun is Aligned and the barrel is pointing out the shroud properly… the back flap will lock in place. No more jams either.
I got the same issue little tricky getting it into proper position with the glock 21. Also the ETS 45acp 30 round magazine will not cycle with the MCK.
You are not locking it correctly which is why you are having issues The Glock has to be lined up perfectly anyways I’ve had one for years and years never had any issues hope you can get it figure out
I just got mine today and it cost me a shit load of money with the exchange and and custom charges (I’m from Canada) the issue I am having is the gun is inserted properly but can’t lock that trap door,it does not let me push that trap door forward enough to see the red dot and pop up the button which indicates it’s locked,need to contact IDS to see what’s a solution???
when it's in even tilt the nose of the gun down and push till it clicks.
CAA also has a RUclips channel that comes out once a week. It addresses problems customers may have with the mck. That’s how I figured out the issue I had with mine.
Thanks!!
Need to extend the barrel shroud out. The tip up barrel on the Glock rubs the in side of the barrel shroud. Had the same problem with my dagger.
DJ. I had the same problem with the sameGL21 and mck. Two things: you’re not pushing the button on the flap that locks the barrel in. It needs to back up and then 2. Take a screwdriver and push the barrel down in front until it’s in place(Look down the barrel shroud and you’ll see it needs to be centered ) once the gun is Aligned and the barrel is pointing out the shroud properly… the back flap will lock in place. No more jams either.
Ok. Thanks for watching.
I got the same issue little tricky getting it into proper position with the glock 21. Also the ETS 45acp 30 round magazine will not cycle with the MCK.
How does it not cycle? Is it blocked by the mck or something?
You are not locking it correctly which is why you are having issues
The Glock has to be lined up perfectly anyways I’ve had one for years and years never had any issues hope you can get it figure out
Thanks. I feel like it’s locked in correctly. It’s hard to get there but when I do the slide moves freely.
I just got mine today and it cost me a shit load of money with the exchange and and custom charges (I’m from Canada) the issue I am having is the gun is inserted properly but can’t lock that trap door,it does not let me push that trap door forward enough to see the red dot and pop up the button which indicates it’s locked,need to contact IDS to see what’s a solution???
You need to move the front barrel up for that glock there are set screws under your thumb rests
Ok. I’ll check that out. Thanks for watching.
Will it fit the Glock 30
I’m not sure what all it fits. You would need to try to research that or contact the manufacturer. Sorry I can’t help with that.
It won’t work with Glock 21
You need to get Mck that specifically for g 21
It was a misprint on the Mck .
Not sure.