I was already on deal-buys ebay site as you were talking. I started with lanzar amp 11 years ago and I still use them! This brand has always been great and I will continue to use em!!
I loved my 1400d .. wasnt sure it did its rated but i was impressed when i got it on a dvc 2ohm, 2000watt rms sub @ 1 ohm.. ran it for a couple years and never had a problem.. also i bought it used from a pawn shop for under $100... good amp
Nice Gerber I have two of the same! Another good dyno video like always thorough and full of information! No better way to be an informed buyer then your videos and bigdwiz as well!
Awesome optidrive. Seeing your dyno test made me feel likes my opti2000d are doing it’s rated or closed to power rating. Thanks keep up the good work dyno more amplifier.
Love the ratings, but it’s weight can drift me off. It’s the main reason I traded my Crescendo concerto for a lightweight Stetsom 3k. I’m looking to save as much weight as possible and planning on changing my standard Sundowns for the Neo versions.
The opti line are pretty good. Love there subs. I ran some of the ST max subs and are very good for 40 dollar subs, they don't handle high power for very long though. I like the amps though they need amperage and will eat as much voltage as you can give em .
I know man and i'm not tryin to give you a hard time cause i'm not, i'm just gettin at you. I appreciate the heck out of you and bigD and what u guys do i've just had a hard on ever since u mentioned the xtr4k, its one i've wanted to see for a long time. Came oh so close to getting one a year ago but went with a synergy 3500, the korean one not the new Chinese one, but always in the market for a trade if it hits like the 2500 xtr does.
If the xtr4k is anything like the hcca that Big D tested, Ryan might be waiting until his home owners insurance policy offers "Blown tha Roof oFF!!" coverage.
I think it's rated for 1.33 ohms because usually subs read slightly higher impedance than just the 1 ohm. They usually end up at 1.3 or 1.4. Also, boxrise.
It can handle a 1ohm load as well I had the lanzar htg2600 it had 2000watts stated on the amplifier at 1.3ohms but I ran it at 1ohm and it performed great but we all know it wasn't 2000watts it was at Least about 1500watts
Its always exciting to find a new budget gem or bust in my feed. On a Monday even better. I might snag one of these class d opti drives but only after a class a/b 700x2. Do I dare add an amp not made in the USA to my collection? These are tempting but I think my first foreign made amp will be a DSPLX. Orion seems to be on top at the moment.
yall both would have been right if yall would have specified dual or single coil. 3 single coil subs at 4ohms wired parallel = a 1.33 ohm load. 3 dual voice coil subs at 2ohms wired Series/Parallel = 1.33 ohms.
I was just poking fun at y'all because we are on a channel dedicated to audio and many would of read those comments as "number of subwoofers, impedance of each woofers". You know, cause the context in which Ryan made that comment was in relation to coils and wiring configurations. So i added that in for yall to actually make both of yalls posts correct. Like sarcasm.. 3 4ohm single voice coil subs wired in series instead of in parallel would be totally different.. See what im saying?
+Twinky UnOuWaNtMyCrEaMFiLlInG +Twinky UnOuWaNtMyCrEaMFiLlInG I said 3 4ohm subs, if I had ment dual vc I would have said that. I know exactly what I'm talking about, if simony else is to stupid to realize that then that's your problem.. 3 subs at 4 ohm each, plain and simple. next time I won't even waste my time.. the other guy should be the one to specify, because by his comment he is actually wrong
I would love to find one of these amps, but considering the prices are around 3 to 400 bucks, it just isn't worth the hassle to buy one used for refurbed and there are many amps that can do just as well as these do for the same price. I wish these were still made or I would get one
Is this same amp as dual da6001?? The power inputs, fuses and controls are identical. Even the "link" feature. Even dynamic power at 1ohm is just a few watts from each other.
I have been very impressed with these amps so far. May have to pick one up myself eventually. It's rated at half and ohm on the box, I just wonder if it would handle that? I heard u say u thought it was a misprint.
it will handle it, .5 on a dyno is really harder than .5ohm in the real world. especially if u account for box rise.. but running .5ohm isn't for normal everyday use unless you've done upgrades to your electrical and can keep a good consistent voltage.. I would only do it on a well built Korean board amp, I wouldn't chance it on any budget amp. feed it dual 1/0 power & ground and you'd have a better chance
Every Lanzar opti is build waaayy different than their other lines. Thanx to ZED. Very good amps. Just make sure you cut a hole on the bottom plate and add a fan. It will play all day for you.
Love ur videos keep them coming please lol I dont know why buy that amp reminds me of American Bass kinda the look of it I wonder if u compared the inside if it would be rhe same
i loved my opti 1400d i had on 2 re audio sex 12s ported and they pounded loud till the subs blew amp never failed me til i sold it i should of kept it they are getting very hard to find
Great review, thank you. I would be grateful if you could dyno a Lanzar Optidrive2000D please? It is reputedly 0.5 ohm stable which is a rarity these days, I want to see if it holds up so I can wire my JL 13W7s voice coils in parallel. That would be a 0.75 ohm load and my JBL1400.1 can’t manage a load that low.
Ryan, can I send you my Fosgate Punch 800a2 to test? I am super curious what those amps truly push out. I haven’t seen any dyno test for that particular amp either
What would be the process of providing an amp to test? I have a PowerBass ASA3-1000.1D which is a car audio company from my hometown of Ontario, California
what would be a good budget amp for 2 americanbass xfl 15s wired @ 1 ohm? say no more then 220 bucks. been honnestly considering on getting the lanzar opti2k.
thats a nice gem for the price could you test an amp i have running my door speaker which is a dual 3000 watt compact series 4 channel apparently it's strong enough to pop any rockford doors i have bought i dont know man i paid 153 Canadian for it check it out forget the model number
does anyone know if samyoung capacitors are good. i opened up my hifonics amp and all the caps inside are samyoung. i googled the caps but all i got is you dont want these caps in your Lg or samsung tv, got nothing on car audio
@@bigblank69 dang. was trying to get 2k @ .5 ohm on a budget for my house setup. i've seen Ignite Audio R3000/1D for 100 and big d run it at .5 hitting that number. it's internals aren't as nice as these so i was hoping this would as well, but i do like the hookups much better on this than the ignite..
Darn, I bought 2 Skar Audio 8001d amps, I should have bought those bad boys. The Skar is made in China, which when I bought it I thought it was Korean. 😣 That Lanzar is better probably in everyway
@@bigblank69 it's also kind of weird they are not trying to get their stuff tested? Youed think they would be all over it . I know your test effect sales for these companies. What you do for the consumer is awesome and I appreciate it.
I always liked this brand.
I was already on deal-buys ebay site as you were talking. I started with lanzar amp 11 years ago and I still use them! This brand has always been great and I will continue to use em!!
I loved my 1400d .. wasnt sure it did its rated but i was impressed when i got it on a dvc 2ohm, 2000watt rms sub @ 1 ohm.. ran it for a couple years and never had a problem.. also i bought it used from a pawn shop for under $100... good amp
Nice Gerber I have two of the same! Another good dyno video like always thorough and full of information! No better way to be an informed buyer then your videos and bigdwiz as well!
Appreciate the time you take doing these. Keep on keeping on mate ..
Great video my friend. I love these lanzar opti amps.
Awesome optidrive. Seeing your dyno test made me feel likes my opti2000d are doing it’s rated or closed to power rating. Thanks keep up the good work dyno more amplifier.
opti line is real deal, nice prices!, well built!!!
Love the ratings, but it’s weight can drift me off. It’s the main reason I traded my Crescendo concerto for a lightweight Stetsom 3k. I’m looking to save as much weight as possible and planning on changing my standard Sundowns for the Neo versions.
The opti line are pretty good. Love there subs. I ran some of the ST max subs and are very good for 40 dollar subs, they don't handle high power for very long though. I like the amps though they need amperage and will eat as much voltage as you can give em .
Nice gem there ryan$! Pease never change your amp dino song either!!!
Tater T.V. i hope he doesn't, wish I knew the name of it. Beat sounds awesome
I love it too
What the title?
Dyno beat is nice. Intro tune needs help.
TF, "dino" haha.
Nice! I didn't think I'd see a video today, but here it is! Nice little Korean made amp for a good price.
Not bad!! Did better than I thought!
again you hold out on the xtr4k .........u killin me man.
I know man and i'm not tryin to give you a hard time cause i'm not, i'm just gettin at you. I appreciate the heck out of you and bigD and what u guys do i've just had a hard on ever since u mentioned the xtr4k, its one i've wanted to see for a long time. Came oh so close to getting one a year ago but went with a synergy 3500, the korean one not the new Chinese one, but always in the market for a trade if it hits like the 2500 xtr does.
If the xtr4k is anything like the hcca that Big D tested, Ryan might be waiting until his home owners insurance policy offers "Blown tha Roof oFF!!" coverage.
Wanna see that xtr4k .. too
Nice video! I'm liking these Lanzar Opti-Drive amps!
Great review. Thanks for the work you put in for amp geeks
I think it's rated for 1.33 ohms because usually subs read slightly higher impedance than just the 1 ohm. They usually end up at 1.3 or 1.4. Also, boxrise.
Lanzar needs to bring back the Opti50c
Test the Rockville RXM-S6 Marine/Boat 6 Channel Amplifier or the Power Acoustik RZ1-3500D mono amp!!
Love Opti stuff. There mids are really nice too.
Great review nice amp you should of ran the 1/2 ohm test
Wow is Lanzar actually coming back as a reliable company with actually rating it seems so 👍👍👍👍
No this amp is like 20 yrs old lol there opti and vibe line always did rated
You're about to drive the prices of these up RB.
do you sell the amps after you finish the dyno test. i would love to buy an amp you dynoed
It can handle a 1ohm load as well I had the lanzar htg2600 it had 2000watts stated on the amplifier at 1.3ohms but I ran it at 1ohm and it performed great but we all know it wasn't 2000watts it was at Least about 1500watts
I liked seeing the temperature stay that low
That is a nice gem for under 200 dollars it cannot be beat
Always been a closet lanzar fan. Great vid
bro, gotta do a cerwin vega amp!
Its always exciting to find a new budget gem or bust in my feed. On a Monday even better. I might snag one of these class d opti drives but only after a class a/b 700x2. Do I dare add an amp not made in the USA to my collection? These are tempting but I think my first foreign made amp will be a DSPLX. Orion seems to be on top at the moment.
1.33 would be 3 4ohm subs
tankdog03 2 ohm not 4 ohm
yall both would have been right if yall would have specified dual or single coil.
3 single coil subs at 4ohms wired parallel = a 1.33 ohm load.
3 dual voice coil subs at 2ohms wired Series/Parallel = 1.33 ohms.
+Twinky UnOuWaNtMyCrEaMFiLlInG I am right, three 4ohm loads
I was just poking fun at y'all because we are on a channel dedicated to audio and many would of read those comments as "number of subwoofers, impedance of each woofers". You know, cause the context in which Ryan made that comment was in relation to coils and wiring configurations. So i added that in for yall to actually make both of yalls posts correct. Like sarcasm..
3 4ohm single voice coil subs wired in series instead of in parallel would be totally different.. See what im saying?
+Twinky UnOuWaNtMyCrEaMFiLlInG +Twinky UnOuWaNtMyCrEaMFiLlInG I said 3 4ohm subs, if I had ment dual vc I would have said that. I know exactly what I'm talking about, if simony else is to stupid to realize that then that's your problem.. 3 subs at 4 ohm each, plain and simple. next time I won't even waste my time..
the other guy should be the one to specify, because by his comment he is actually wrong
not bad and opti drives are usually a bit underrated ... .
I have some early 2000 earthquake PH2D’s they are suppose to be rated 2000 watts. I would love to see one on the dyno.
Impressive I never bought or sold them I remember them being in a lot flea markets and I do system as side jobs
Nice work
I would love to find one of these amps, but considering the prices are around 3 to 400 bucks, it just isn't worth the hassle to buy one used for refurbed and there are many amps that can do just as well as these do for the same price. I wish these were still made or I would get one
Is this same amp as dual da6001?? The power inputs, fuses and controls are identical. Even the "link" feature. Even dynamic power at 1ohm is just a few watts from each other.
Why isn't bass boost recommended for use ?
Had the same amp
Refurb on Amazon about 3 yrs ago for 90$ shipped
I ran mine at 1 ohm then 1/2ohm for a LONG time
Consistant power!
Great video buddy.
Ryan do you have any experience with the 1700.1d? They are at a great price and if it does well I am going to buy one!
7001d sorry
@@bradgilpin9740 sorry, no experience with them
I have been very impressed with these amps so far. May have to pick one up myself eventually. It's rated at half and ohm on the box, I just wonder if it would handle that? I heard u say u thought it was a misprint.
Ryan Blankenship thanks man that's good to know.
it will handle it, .5 on a dyno is really harder than .5ohm in the real world. especially if u account for box rise.. but running .5ohm isn't for normal everyday use unless you've done upgrades to your electrical and can keep a good consistent voltage.. I would only do it on a well built Korean board amp, I wouldn't chance it on any budget amp.
feed it dual 1/0 power & ground and you'd have a better chance
Every Lanzar opti is build waaayy different than their other lines. Thanx to ZED. Very good amps. Just make sure you cut a hole on the bottom plate and add a fan. It will play all day for you.
a trick I like to do is mount amp on the side that my port is on so there's are flow on the side of the trunk as my amp seams to help with cooling
this amp is perfect for my earthquake magma, the sub is a dual 3 ohm
Ryan this brand is made by the same company that makes the Orion brand MD- Engineering Inc ?
Well damn.. would have never thought that amp to do such good numbers..
Do you by chance have any of these optis
Cool amp!
It didn't seem like the transformers were seated with any type of silicone or anything, were they? It was hard to see in the vid.
Ryan Blankenship awesome! I like this little amp
Love ur videos keep them coming please lol
I dont know why buy that amp reminds me of American Bass kinda the look of it I wonder if u compared the inside if it would be rhe same
Wait what - are these being produced once again???!
Have you ever done a Lanzar Vector ? i got an old VCT-2260 just wondering how they do and cant find any dynos on them. Thanks
I see those fangze caps in ct sounds amps a lot
i loved my opti 1400d i had on 2 re audio sex 12s ported and they pounded loud till the subs blew amp never failed me til i sold it i should of kept it they are getting very hard to find
Nice. Great numbers.
Can you test the kicker Cx 1800i
Hey everyone. New to the channel. What is the difference between the uncertified and a certified tests?
Very nice. Whats the cost on this amplifier.
Volvo John - so, on the video you clicked on, and watched, there are words below it. Read about 15 words in.
Volvo John - also,.. if you even watched the video, you clicked on, he tells you.
Yeah thanks man. I watched the whole video like I always do. Just jumped the gun on that question.
I wish u would test the opti4001d..
I run the opti7001d wish u could get a hold of one for dyno i like it.
Great review, thank you.
I would be grateful if you could dyno a Lanzar Optidrive2000D please?
It is reputedly 0.5 ohm stable which is a rarity these days, I want to see if it holds up so I can wire my JL 13W7s voice coils in parallel. That would be a 0.75 ohm load and my JBL1400.1 can’t manage a load that low.
Sometimes people get three 4ohm woofers..... Three 4ohm woofers = 1.33 ohm
I suspect the 1.3 ohm thing is just a void the warranty.
Ryan, can I send you my Fosgate Punch 800a2 to test? I am super curious what those amps truly push out. I haven’t seen any dyno test for that particular amp either
Basically, its around...
500w- 4ohm
800w- 2ohm
1000w- 1.33ohm
1300w- 1ohm
Bought a Lanzar VCT2010 800 WATTS 2 Channel for $58 on ebay, worth it?
Hate to burst your bubble but the fan does not cool the driver board it cools the choke coils just like a planet audio anarchy series amp.
I think it will get it plus.
Why don't you start the VDC,@14.4VDC most cars vdc starts there.
Because I dont use a alternator like a car
What would be the process of providing an amp to test? I have a PowerBass ASA3-1000.1D which is a car audio company from my hometown of Ontario, California
what would be a good budget amp for 2 americanbass xfl 15s wired @ 1 ohm? say no more then 220 bucks. been honnestly considering on getting the lanzar opti2k.
Great amp lanzar
thats a nice gem for the price could you test an amp i have running my door speaker which is a dual 3000 watt compact series 4 channel apparently it's strong enough to pop any rockford doors i have bought i dont know man i paid 153 Canadian for it check it out forget the model number
korny69 he did a Dual XPR84D which is a 4channel amp. Did really well. I even bought one because of the vid an it sounds great
Tater Tot
Ya I'm impressed with mine super cheap and amazing sound just wish i had true number it says rms is running 907 watts at 4 ohms
Why is it rated for 1.33? With impedence rise would 1 ohm be ok to run?
It will do fine at 1 ohm
does anyone know if samyoung capacitors are good. i opened up my hifonics amp and all the caps inside are samyoung. i googled the caps but all i got is you dont want these caps in your Lg or samsung tv, got nothing on car audio
I had this amp on a opti triple stack 12
BOX SAYS .5 OHM STABLE?? is this true?
On subwoofers yes, not on the dyno... it protects at .5 on the dyno
HEY RYAN do you know if this is similar to the DUAL da6001?
It is not, different amp design
I have a Rockville db55 I would like to see what its got. Would you be interested in dynoing it?
Ryan Blankenship ok cool. I also have the db15 on a Skar EVL 18. Would be interested in seeing those results too
Good amplifier
do these do .5 ohm?
Not on a amp dyno... they go into protect
@@bigblank69 dang. was trying to get 2k @ .5 ohm on a budget for my house setup. i've seen Ignite Audio R3000/1D for 100 and big d run it at .5 hitting that number. it's internals aren't as nice as these so i was hoping this would as well, but i do like the hookups much better on this than the ignite..
Do a MA audio hk 4000
today ive bought this amp..can i play 2 poineer 308d4 on it at parallel wiring..will it be stable?? plz reply
Yes and yes
@@bigblank69 thanku sooo much for your reply..love from pakistan 😊😊😊
I like that pocket knife you had sittin there
Wade Hensley Gerber paraframe
Darn, I bought 2 Skar Audio 8001d amps, I should have bought those bad boys. The Skar is made in China, which when I bought it I thought it was Korean. 😣 That Lanzar is better probably in everyway
Mike Raskin stick with skar
There rp series are made in China there skv series are korean made.
james mcnugget thanks, didn't know. I need to learn how to find out before I buy. Do you know about Skars subs?
Mike Raskin had a few skar subs... loved them hated the ddx model cause it wasn’t impressive to me
When are we going to see a certain Vega amp tested ? I mean one of the most respected names in audio and we never see shit
I havent found one interesting to test.. and Cerwin Vega isnt out there trying to get an amp tested. Ask them
@@bigblank69 it's also kind of weird they are not trying to get their stuff tested? Youed think they would be all over it . I know your test effect sales for these companies. What you do for the consumer is awesome and I appreciate it.
1.33 ohm is bc there opti 12” subs are 1.33 ohms
Korea 🙌🏽
Wow I amused by this amp
Test it at .5!!!
Winner winner chicken dinner.
Why didn't you half ohm dat ish, SON?!! :)
Lanzar Opti
Anybody with three duel 2ohm woofers 1.3 ohms
John Work three dual 2ohm woofers wired in series that is
Your apology for saying Jesus Christ in this video means a lot.
It is so funny I thought you were a fat guy , did not know you lifted tilli saw your first video
Ok can't knock Lanzar
Great amps
I've had the 1300d and the 1400d
Ran both at 1/2ohm too
Even tho the majority of time the 1400d was at 2ohm on a sa12
Come on, the box says .5 ohm
I will pay if it pops.
this is the first lanzar that I see do rating power
BROTHER